Electronics: circuits and components Books
Springer Engineering Mathematics by Example
Book Synopsis
£53.99
Springer International Publishing AG Introduction to Logic Circuits & Logic Design
Book SynopsisThis textbook for courses in Digital Systems Design introduces students to the fundamental hardware used in modern computers. Coverage includes both the classical approach to digital system design (i.e., pen and paper) in addition to the modern hardware description language (HDL) design approach (computer-based). Using this textbook enables readers to design digital systems using the modern HDL approach, but they have a broad foundation of knowledge of the underlying hardware and theory of their designs. This book is designed to match the way the material is actually taught in the classroom. Topics are presented in a manner which builds foundational knowledge before moving onto advanced topics. The author has designed the presentation with learning goals and assessment at its core. Each section addresses a specific learning outcome that the student should be able to “do” after its completion. The concept checks and exercise problems provide a rich set of assessment tools to measure student performance on each outcome.Table of ContentsIntroduction – Analog Vs. Digital.- Number Systems.- Digital Circuitry & Interfacing.- Combinational Logic Design.- Verilog (Part 1).- MSI Logic.- Sequential Logic Design.- Verilog (Part 2).- Behavioral Modeling of Sequential Logic.- Memory.- Programmable Logic.- Arithmetic Circuits.- Computer System Design.- Appendix A: List of Worked Examples.
£62.99
Springer International Publishing AG Electricity: Electromagnetism and Electric
Book SynopsisThis book leads students to learn electromagnetism and then moves to chapters about electric circuits. It aims to give an understanding of electromagnetism which gives a fast way to master the features of circuit elements such as resistors, capacitors, and coils that compose electric circuits. The author provides chapters on electromagnetism and electric circuits separately and gives a chapter explaining the correlation between them in detail.In the chapters for electric circuit, DC electric circuits, transient and steady response of AC electric circuits are treated. AC circuit theory is introduced for describing the phenomena in circuits. Theoretical treatments such as branch current method, closed current method, and node potential method are also introduced to show the validity of solution methods that have been used in the book. The book can serve as a compact textbook for lectures, as an introduction for hardware system and electric control systems, and mechanical systems. Chapters for electromagnetism or ones for electric circuits are suitable for a lecture over a semester.Table of ContentsElectric Phenomena in Vacuum.- Conductors and Dielectric Materials.- Steady Current.- Current and Magnetic Phenomena.- Superconductors and Magnetic Materials.- Time-Dependent Electromagnetic Phenomena.- Direct Current Circuit.- Transient and Steady Responses of Electrical Circuit.- Alternating Current Circuit.- Transformer Circuit.- Theorems for Electric Circuit.
£58.49
Birkhauser Verlag AG Structural Decision Diagrams in Digital Test: Theory and Applications
Book SynopsisThis is the first book that sums up test-related modeling of digital circuits and systems by a new structural-decision-diagrams model. The model represents structural and functional information jointly and opens a new area of research.The book introduces and discusses applications of two types of structural decision diagrams (DDs): low-level, structurally synthesized binary DDs (SSBDDs) and high-level DDs (HLDDs) that enable diagnostic modeling of complex digital circuits and systems.Topics and features: Provides the definition, properties and techniques for synthesis, compression and optimization of SSBDDs and HLDDs Provides numerous working examples that illustrate the key points of the text Describes applications of SSBDDs and HLDDs for various electronic design automation (EDA) tasks, such as logic-level fault modeling and simulation, multi-valued simulation, timing-critical path identification, and test generation Discusses the advantages of the proposed model to traditional binary decision diagrams and other traditional design representations Combines SSBDDs with HLDDs for multi-level representation of digital systems for enabling hierarchical and cross-level solving of complex test-related tasks This unique book is aimed at researchers working in the fields of computer science and computer engineering, focusing on test, diagnosis and dependability of digital systems. It can also serve as a reference for graduate- and advanced undergraduate-level computer engineering and electronics courses.Three authors are affiliated with the Dept. of Computer Systems at the Tallinn University of Technology, Estonia: Raimund Ubar is a retired Professor, Jaan Raik and Maksim Jenihhin are tenured Professors. Artur Jutman, PhD, is a researcher at the same university and the CEO of Testonica Lab Ltd., Estonia.Table of ContentsChapter 1: Introduction.- Chapter 2: Overview of structural decision diagrams.- Chapter 3: Structurally Synthesized Binary Decision Diagrams.- Chapter 4: Fault modeling in digital circuits.- Chapter 5: Logic-level fault simulation.- Chapter 6: Test generation, fault diagnosis and testability.- Chapter 7: High-Level Decision Diagrams.- Chapter 8: Test generation for microprocessors with HLDDs.
£179.99
Springer International Publishing AG Industrial Electronic Circuits Laboratory Manual
Book SynopsisIndustrial Electronics is a branch of electronics, which is used for industrial applications. It plays a crucial role in the efficient and smooth operation of manufacturing facilities and industrial processes. This book introduces the commonly used building blocks in industrial electronics. The reader learns which circuit can be used for which application. It is suitable as a laboratory manual for courses like: industrial electronics or power electronics.Table of ContentsCommonly Used Laboratory Equipment.- Different Types of Switches.- Thyristors and Triacs.- Power Supply Circuits.- DC-DC Converters.- Filter and Comparator Circuits.- Control of DC Motors.- Delay Circuits.- Appendix A: Drawing Graphs with MATLAB®.
£40.49
Springer Wireless Power Technologies for Biomedical
Book SynopsisChapter.1.Wireless Power Transfer for Self-reporting Cardiovascular Implantable Medical Devices.- Chapter.2.Advancements in Energy Harvesting for Implantable Cardiovascular Devices.- Chapter.3.Magnetoelectric Composites for implantable wireless power transferin biomedical applications.- Chapter.4 Triboelectric Nanogenerators Competency to Wireless Device Applications.-Chapter 5 Photovaltoic energy Scavenging for the sustainable implantable Medical device.- Chapter 6 ultrasound- Based Wireless powering technologies.-Chapter.7.Smart Contact Lens.- Chapter.8.Motivation.- Chapter.9. Power Management Integrated Circuits for Implantable Devices.
£89.99
Springer SingleEvent Effects from Space to Accelerator
Book SynopsisRadiation environments and their effects on electronics.- Introduction to Single-Event Effects.- Single-event effects prediction methodologies.- Radiation Hardness Assurance (RHA) methodologies.- Radiation hardening techniques.- Analysis of RHBD techniques at layout level.- Analysis of RHBD techniques at circuit level.- Hardness improvement based on signal probability.- Conclusions/Future Perspectives.
£40.49
Springer Artificial Intelligence for Engineers
Book SynopsisPreparation Knowledge: Basics of AI.- Tools for Artificial Intelligence.- Linear Models.- Decision Trees.- Support Vector Machine.- Bayesian Algorithms.- Artificial Neural Network.- Deep Learning.- Ensemble Learning.- Clustering.- Dimension Reduction.- Anomaly Detection.- Association Rule Leaming.- Basics of and Value-Based Reinforcement Learning.- Policy-Based Reinforcement Learning.
£80.99
Springer Quantum Computing Architecture and Hardware for
Book SynopsisPart I: Overview of Quantum Computers and Review of Essential Quantum Mechanics.- Chapter 1: Quantum Computer Hardware and Architecture - An Overview.- Chapter 2: Linear Algebra - Vectors, States, and Measurement.- Chapter 3: Linear Algebra - Operators, Matrices and Quantum Gates.- Chapter 4: Schrodinger Equation and Quantum Gates.- Chapter 5: Bloch Sphere, Quantum Gates, and Pauli Matrices.- Chapter 6: Density Matrix and the Bloch Sphere.- Part II: Silicon Spin Qubit Architecture and Hardware.- Chapter 7: Spin Qubit - Preliminary Physics.- Chapter 8: Spin Qubit - Larmor Precession - Phase Shift Gate.- Chapter 9: Spin Qubit - Rabi Oscillation.- Chapter 10: Spin Qubit - Rabi Oscillation under Rotating Field using Rotating Frame.- Chapter 11: Electron Spin Qubit in Semiconductor - Implementation, Initialization and Readout.- Chapter 12: Electron Spin Qubit in Semiconductor - 1-Qubit and 2-Qubit Gates.- Part III: Superconducting Qubit Architecture and Hardware.- Chapter 13: Lagrangian Mechanics and Hamiltonian Mechanics.- Chapter 14: Quantization of Simple Harmonic Oscillator.- Chapter 15: Quantization of an LC Tank - a Bad Qubit.- Chapter 16: Superconductor and Josephson Junction.- Chapter 17: Cooper Pair Box Qubit - Hamiltonian.- Chapter 18: Cooper Pair Box - Analytical Solution.- Chapter 19: Cooper Pair Box - Numerical Solution.- Chapter 20: Charge Qubit Dynamics - Precession and 1-Qubit Gate.- Chapter 21: Transmon Qubit - 1-Qubit and 2-Qubit Gates.- Chapter 22: Superconducting Qubit - Readout and Initialization.- Part IV: Design and Implementation.- Chapter 23: Microwave Electronics in Quantum Computers.- Chapter 24: Design of Integrated Superconducting Qubit Chip.- Chapter 25: Errors and Decoherence.
£44.99
Springer International Publishing AG Microcontrollers Fundamentals for Engineers and Scientists
Book SynopsisThis book provides practicing scientists and engineers a tutorial on the fundamental concepts and use of microcontrollers. Today, microcontrollers, or single integrated circuit (chip) computers, play critical roles in almost all instrumentation and control systems. Most existing books arewritten for undergraduate and graduate students taking an electrical and/or computer engineering course. Furthermore, these texts have beenwritten with a particular model of microcontroller as the target discussion. These textbooks also require a requisite knowledge of digital design fundamentals. This textbook presents the fundamental concepts common to all microcontrollers. Our goals are to present the over–arching theory of microcontroller operation and to provide a detailed discussion on constituent subsystems available in most microcontrollers. With such goals, we envision that the theory discussed in this book can be readily applied to a wide variety of microcontroller technologies, allowing practicing scientists and engineers to become acquainted with basic concepts prior to beginning a design involving a specific microcontroller. We have found that the fundamental principles of a given microcontroller are easily transferred to other controllers. Although this is a relatively small book, it is packed with useful information for quickly coming up to speed on microcontroller concepts.Table of ContentsDigital Design Fundamentals.- The Design and Development Process.- Microcontroller.- Timing Subsystem.- Analog-to-Digital Conversion.- Networked Microcontrollers.- Operating Parameters and Interfacing.
£26.59
Springer International Publishing AG PSpice for Filters and Transmission Lines
Book SynopsisIn this book, PSpice for Filters and Transmission Lines, we examine a range of active and passive filters where each design is simulated using the latest Cadence Orcad V10.5 PSpice capture software. These filters cannot match the very high order digital signal processing (DSP) filters considered in PSpice for Digital Signal Processing, but nevertheless these filters have many uses. The active filters considered were designed using Butterworth and Chebychev approximation loss functions rather than using the ‘cookbook approach’ so that the final design will meet a given specification in an exacting manner. Switched-capacitor filter circuits are examined and here we see how useful PSpice/Probe is in demonstrating how these filters, filter, as it were. Two-port networks are discussed as an introduction to transmission lines and, using a series of problems, we demonstrate quarter-wave and single-stub matching. The concept of time domain reflectrometry as a fault location tool on transmission lines is then examined. In the last chapter we discuss the technique of importing and exporting speech signals into a PSpice schematic using a tailored-made program Wav2ascii. This is a novel technique that greatly extends the simulation boundaries of PSpice. Various digital circuits are also examined at the end of this chapter to demonstrate the use of the bus structure and other techniques.Table of ContentsPassive Filters and Bode Plotting.- Loss Functions and Active Filter Design.- Voltage-Controlled Voltage Source Active Filters.- Infinite Gain Multiple Feedback Active Filters.- Biquadratic Filters and Monte-Carlo Analysis.- Switched-Capacitor Filter Circuits.- Two-Port Networks and Transmission Lines.- Importing and Exporting Speech Signals.
£31.49
Springer International Publishing AG PSpice for Digital Signal Processing
Book SynopsisPSpice for Digital Signal Processing is the last in a series of five books using Cadence Orcad PSpice version 10.5 and introduces a very novel approach to learning digital signal processing (DSP). DSP is traditionally taught using Matlab/Simulink software but has some inherent weaknesses for students particularly at the introductory level. The ‘plug in variables and play’ nature of these software packages can lure the student into thinking they possess an understanding they don’t actually have because these systems produce results quicklywithout revealing what is going on. However, it must be said that, for advanced level work Matlab/Simulink really excel. In this book we start by examining basic signals starting with sampled signals and dealing with the concept of digital frequency. The delay part, which is the heart of DSP, is explained and applied initially to simple FIR and IIR filters. We examine linear time invariant systems starting with the difference equation and applying the z-transform to produce a range of filter type i.e. low-pass, high-pass and bandpass. The important concept of convolution is examined and here we demonstrate the usefulness of the 'log' command in Probe for giving the correct display to demonstrate the 'flip n slip' method. Digital oscillators, including quadrature carrier generation, are then examined. Several filter design methods are considered and include the bilinear transform, impulse invariant, and window techniques. Included also is a treatment of the raised-cosine family of filters. A range of DSP applications are then considered and include the Hilbert transform, single sideband modulator using the Hilbert transform and quad oscillators, integrators and differentiators. Decimation and interpolation are simulated to demonstrate the usefulness of the multi-sampling environment. Decimation is also applied in a treatment on digital receivers. Lastly, we look at some musical applications for DSP such as reverberation/echo using real-world signals imported into PSpice using the program Wav2Ascii. The zero-forcing equalizer is dealt with in a simplistic manner and illustrates the effectiveness of equalizing signals in a receiver after transmission.Table of ContentsIntroduction toDigital Signal Processing.- Difference Equations and the z-Transform.- Digital Convolution, Oscillators, and Windowing.- Digital Filter Design Methods.- Digital Signal Processing Applications.- Down-Sampling and Digital Receivers.
£31.49
Springer International Publishing AG Finite State Machine Datapath Design, Optimization, and Implementation
Book SynopsisFinite State Machine Datapath Design, Optimization, and Implementation explores the design space of combined FSM/Datapath implementations. The lecture starts by examining performance issues in digital systems such as clock skew and its effect on setup and hold time constraints, and the use of pipelining for increasing system clock frequency. This is followed by definitions for latency and throughput, with associated resource tradeoffs explored in detail through the use of dataflow graphs and scheduling tables applied to examples taken from digital signal processing applications. Also, design issues relating to functionality, interfacing, and performance for different types of memories commonly found in ASICs and FPGAs such as FIFOs, single-ports, and dual-ports are examined. Selected design examples are presented in implementation-neutral Verilog code and block diagrams, with associated design files available as downloads for both Altera Quartus and Xilinx Virtex FPGA platforms. A working knowledge of Verilog, logic synthesis, and basic digital design techniques is required. This lecture is suitable as a companion to the synthesis lecture titled Introduction to Logic Synthesis using Verilog HDL. Table of Contents: Calculating Maximum Clock Frequency / Improving Design Performance / Finite State Machine with Datapath (FSMD) Design / Embedded Memory Usage in Finite State Machine with Datapath (FSMD) DesignsTable of ContentsCalculating Maximum Clock Frequency.- Improving Design Performance.- Finite State Machine with Datapath (FSMD) Design.- Embedded Memory Usage in Finite State Machine with Datapath (FSMD) Designs.
£26.59
Springer Vieweg Strukturorientierte Bewertung
Book Synopsis
£80.99
Walter de Gruyter Rechnerorganisation Und Rechnerentwurf: Die
Book Synopsis
£76.46
Springer International Publishing AG Noise-Shaping All-Digital Phase-Locked Loops: Modeling, Simulation, Analysis and Design
Book SynopsisThis book presents a novel approach to the analysis and design of all-digital phase-locked loops (ADPLLs), technology widely used in wireless communication devices. The authors provide an overview of ADPLL architectures, time-to-digital converters (TDCs) and noise shaping. Realistic examples illustrate how to analyze and simulate phase noise in the presence of sigma-delta modulation and time-to-digital conversion. Readers will gain a deep understanding of ADPLLs and the central role played by noise-shaping. A range of ADPLL and TDC architectures are presented in unified manner. Analytical and simulation tools are discussed in detail. Matlab code is included that can be reused to design, simulate and analyze the ADPLL architectures that are presented in the book.Table of ContentsIntroduction.- Phase Digitization in All-Digital PLLs.- A Unifying Framework for TDC Architectures.- Analytical Predictions of Phase Noise in ADPLLs.- Advantages of Noise Shaping and Dither.- Efficient Modeling and Simulation of Accumulator-Based ADPLLs.- Modelling and Estimating Phase Noise with Matlab.
£85.49
Springer International Publishing AG Piezoelectric Accelerometers with Integral Electronics
Book SynopsisThis book provides an invaluable reference to Piezoelectric Accelerometers with Integral Electronics (IEPE). It describes the design and performance parameters of IEPE accelerometers and their key elements, PE transducers and FET-input amplifiers. Coverage includes recently designed, low-noise and high temperature IEPE accelerometers. Readers will benefit from the detailed noise analysis of the IEPE accelerometer, which enables estimation of its noise floor and noise limits. Other topics useful for designers of low-noise, high temperature silicon-based electronics include noise analysis of FET amplifiers, experimental investigation and comparison of low-frequency noise in different JFETs and MOSFETs, and ultra-low-noise JFETs (at level of 0.6 nV/√Hz). The discussion also includes ultra-low-noise (at level of 3 ng/√Hz) seismic IEPE accelerometers and high temperature (up to 175 ̊C) triaxial and single axis miniature IEPE accelerometers, along with key factors for their design.• Provides a comprehensive reference to the design and performance of IEPE accelerometers, including low-noise and high temperature IEPE sensors;• Includes noise analysis of the IEPE accelerometer, which enables estimation of the its noise floor and noise limits;• Describes recently design of ultra-low-noise (at level of 3 ng/√Hz) IEPE seismic accelerometers and high temperature (up to 175 ̊C) triaxial and single axis miniature IEPE accelerometers;• Compares low-frequency noise in different JFETs and MOSFETs including measurement results of ultra-low-noise (at level of 0.6 nV/√Hz) JFET;• Presents key factors for design of low-noise and high temperature IEPE accelerometer and their electronics.Table of ContentsIntroduction to Piezoelectric Accelerometers with Integral Electronics.- Piezoelectric Transducers Used for Piezoelectric Accelerometers with Integral Electronics.- Integral FET Amplifiers Used for IEPE Accelerometers.- Noise of a FET Amplifier.- Comparison of 1/f Noise and Thermal Noise in JFETs and MOSFETs.- Fundamental Noise Limit of an IEPE Accelerometer.- Noise of and IEPE Accelerometer.- Ultra-low-noise IEPE Seismic Accelerometers.- High-temperature, up to 175 ºC, Miniature IEPE Accelerometers.
£104.49
Springer International Publishing AG Dry Etching Technology for Semiconductors
Book SynopsisThis book is a must-have reference to dry etching technology for semiconductors, which will enable engineers to develop new etching processes for further miniaturization and integration of semiconductor integrated circuits. The author describes the device manufacturing flow, and explains in which part of the flow dry etching is actually used. The content is designed as a practical guide for engineers working at chip makers, equipment suppliers and materials suppliers, and university students studying plasma, focusing on the topics they need most, such as detailed etching processes for each material (Si, SiO2, Metal etc) used in semiconductor devices, etching equipment used in manufacturing fabs, explanation of why a particular plasma source and gas chemistry are used for the etching of each material, and how to develop etching processes. The latest, key technologies are also described, such as 3D IC Etching, Dual Damascene Etching, Low-k Etching, Hi-k/Metal Gate Etching, FinFET Etching, Double Patterning etc.Trade ReviewThis book is a must-have reference to dry etching technology for semiconductors, which will enable engineers to develop new etching processes for further miniaturization and integration of semiconductor integrated circuits. The author describes the device manufacturing flow, and explains in which part of the flow dry etching is actually used. The content is designed as a practical guide for engineers working at chip makers, equipment suppliers and materials suppliers, and university students studying plasma, focusing on the topics they need most, such as detailed etching processes for each material (Si, SiO2, Metal etc) used in semiconductor devices, etching equipment used in manufacturing fabs, explanation of why a particular plasma source and gas chemistry are used for the etching of each material, and how to develop etching processes. The latest, key technologies are also described, such as 3D IC Etching, Dual Damascene Etching, Low-k Etching, Hi-k/Metal Gate Etching, FinFET Etching, Double Patterning etc. Table of ContentsContribution of Dry Etching Technology to Progress of Semiconductor Integrated Circuit.- Mechanism of Dry Etching.- Dry Etching of Various Materials.- Dry Etching Equipments.- Dry Etching Damage.- Latest Dry Etching Technologies.- Future Challenges and Outlook for Dry Etching Technology.
£104.49
Springer International Publishing AG Stepped-Frequency Radar Sensors: Theory, Analysis and Design
Book SynopsisThis book presents the theory, analysis and design of microwave stepped-frequency radar sensors. Stepped-frequency radar sensors are attractive for various sensing applications that require fine resolution. The book consists of five chapters. The first chapter describes the fundamentals of radar sensors including applications followed by a review of ultra-wideband pulsed, frequency-modulated continuous-wave (FMCW), and stepped-frequency radar sensors. The second chapter discusses a general analysis of radar sensors including wave propagation in media and scattering on targets, as well as the radar equation. The third chapter addresses the analysis of stepped-frequency radar sensors including their principles and design parameters. Chapter 4 presents the development of two stepped-frequency radar sensors at microwave and millimeter-wave frequencies based on microwave integrated circuits (MICs), microwave monolithic integrated circuits (MMICs) and printed-circuit antennas, and discusses their signal processing. Chapter 5 provides the electrical characterization and test results of the developed microwave and millimeter-wave stepped-frequency radar sensors. Finally, a summary and conclusion is provided.Table of ContentsIntroduction.- General Radar Sensor Analysis.- Stepped-Frequency Radar Sensor Analysis.- Development of Stepped-Frequency Radar Sensors.- System Characterization and Tests.- Summary and Conclusions.
£52.24
Springer International Publishing AG Screen-Printing Electrochemical Architectures
Book SynopsisThis book offers an essential overview of screen-printing. Routinely utilised to fabricate a range of useful electrochemical architectures, screen-printing is also used in a broad range of areas in both industry and academia. It supports the design of next-generation electrochemical sensing platforms, and allows proven laboratory-based approaches to be upscaled and commercially applied. To those skilled in the art, screen-printing allows novel and useful electrochemical architectures to be mass produced, offering fabrication processes that are cost-effective yet highly reproducible and yield significant electrical benefits. However, there is no readily available textbook that actually equips readers to set about the task of screen-printing, explaining its techniques and implementation. Addressing that gap, this book will be of interest to both academics and industrialists delving into screen-printing for the first time. It offers an essential resource for those readers who want learn to successfully design, fabricate and implement (and mass-produce) electrochemical based architectures, as well as those who already have a basic understanding of the process and want to advance their technical knowledge and skills. Trade Review Table of Contents
£40.49
Springer International Publishing AG FPGAs for Software Programmers
Book SynopsisThis book makes powerful Field Programmable Gate Array (FPGA) and reconfigurable technology accessible to software engineers by covering different state-of-the-art high-level synthesis approaches (e.g., OpenCL and several C-to-gates compilers). It introduces FPGA technology, its programming model, and how various applications can be implemented on FPGAs without going through low-level hardware design phases. Readers will get a realistic sense for problems that are suited for FPGAs and how to implement them from a software designer’s point of view. The authors demonstrate that FPGAs and their programming model reflect the needs of stream processing problems much better than traditional CPU or GPU architectures, making them well-suited for a wide variety of systems, from embedded systems performing sensor processing to large setups for Big Data number crunching. This book serves as an invaluable tool for software designers and FPGA design engineers who are interested in high design productivity through behavioural synthesis, domain-specific compilation, and FPGA overlays. Introduces FPGA technology to software developers by giving an overview of FPGA programming models and design tools, as well as various application examples; Provides a holistic analysis of the topic and enables developers to tackle the architectural needs for Big Data processing with FPGAs; Explains the reasons for the energy efficiency and performance benefits of FPGA processing; Provides a user-oriented approach and a sense for where and how to apply FPGA technology. Table of ContentsIntroduction.- CPUs, GPUs, CGRAs, Vector Processing, Systolic Arrays, FPGAs.- The von Neuman Model versus data stream processing.- FPGAs for software designers.- Languages, libraries, and compilers for specific problems.- Behavioral Compiler Capabilities and optimization strategies.- Mapping Approaches and Tools for Heterogeneous FPGAs.- Automatic Tool Flows.- Design frameworks, tools, and tool interaction.- Hardware Platforms.- Parallel Architectures and Overlays.- FPGA Virtualization.- Applications from a Programmers Point of View.- Future Directions.
£113.99
Springer International Publishing AG Electronics for Embedded Systems
Book SynopsisThis book provides semester-length coverage of electronics for embedded systems, covering most common analog and digital circuit-related issues encountered while designing embedded system hardware. It is written for students and young professionals who have basic circuit theory background and want to learn more about passive circuits, diode and bipolar transistor circuits, the state-of-the-art CMOS logic family and its interface with older logic families such as TTL, sensors and sensor physics, operational amplifier circuits to condition sensor signals, data converters and various circuits used in electro-mechanical device control in embedded systems. The book also provides numerous hardware design examples by integrating the topics learned in earlier chapters. The last chapter extensively reviews the combinational and sequential logic design principles to be able to design the digital part of embedded system hardware.Table of ContentsFundamentals of Passive Circuit Analysis.- Diode and Bipolar Transistor Circuits.- MOS Transistors and CMOS Circuits.- TTL Logic and CMOS-TTL Interface.- Physics of Sensors.- Operational Amplifiers and Circuits.- Data Converters.- Front-End Electronics for Embedded Systems.- Review of Combinational and Sequential Logic Circuits and Design.
£62.99
Springer International Publishing AG Designing with Xilinx® FPGAs: Using Vivado
Book SynopsisThis book helps readers to implement their designs on Xilinx® FPGAs. The authors demonstrate how to get the greatest impact from using the Vivado® Design Suite, which delivers a SoC-strength, IP-centric and system-centric, next generation development environment that has been built from the ground up to address the productivity bottlenecks in system-level integration and implementation. This book is a hands-on guide for both users who are new to FPGA designs, as well as those currently using the legacy Xilinx tool set (ISE) but are now moving to Vivado. Throughout the presentation, the authors focus on key concepts, major mechanisms for design entry, and methods to realize the most efficient implementation of the target design, with the least number of iterations.Table of ContentsChapter 1: State of the Art Programmable Logic 1Chapter 2: Vivado Design Tools 17Chapter 3: IP Flows 23Chapter 4: Gigabit Transceivers 35Chapter 5: Memory Controllers 49Chapter 6: Processor Options 65Chapter 7: Vivado IP Integrator 75Chapter 8: SysGen for DSP 85Chapter 9: Synthesis 97Chapter 10: C Based Design 111Chapter 11: Simulation 127Chapter 12: Clocking 141Chapter 13: Stacked Silicon Interconnect (SSI) 155Chapter 14: Timing Closure 167Chapter 15: Power Analysis and Optimization 179Chapter 16: System Monitor 191Chapter 17: Hardware Debug 205Chapter 18: Emulation Using FPGAs 221Chapter 19: Partial Reconfiguration & Hierarchical Design 239
£98.99
Springer Cloud Computing
Book SynopsisIntroduction.- Foundations of Cloud Computing.- Cloud Computing Pyramid.- Features of Private and Public Clouds.- Cloud Workload Characterization.- Cloud Management and Monitoring.- Cloud Computing and Information Security.- Migrating to Cloud.- Migrating a Complex Industry to Cloud.- Cost and Billing practices in Cloud.- Analytics in the Cloud.- Future Trends in Cloud Computing.- A Quick Test of Your Cloud fundamentals Grasp.- Hands-on project to use Cloud Service Provider.- Appendix A: Points to Ponder.- Appendix B: Additional Considerations for Cloud Computing.- Appendix C: Suggested List of Additional Cloud Projects.Appendix A: Points to Ponder.- Appendix B: Additional Considerations for Cloud Computing.- Appendix C: Suggested List of Additional Cloud Projects.Appendix A: Points to Ponder.- Appendix B: Additional Considerations for Cloud Computing.- Appendix C: Suggested List of Additional Cloud Projects.Appendix A: Points to Ponder.- Appendix B: Additional C
£74.99
Springer International Publishing AG Low-Power Analog Techniques, Sensors for Mobile
Book SynopsisThis book is based on the 18 invited tutorials presented during the 27th workshop on Advances in Analog Circuit Design. Expert designers from both industry and academia present readers with information about a variety of topics at the frontiers of analog circuit design, including the design of analog circuits in power-constrained applications, CMOS-compatible sensors for mobile devices and energy-efficient amplifiers and drivers. For anyone involved in the design of analog circuits, this book will serve as a valuable guide to the current state-of-the-art.Provides a state-of-the-art reference in analog circuit design, written by experts from industry and academia;Presents material in a tutorial-based format;Covers the design of analog circuits in power-constrained applications, CMOS-compatible sensors for mobile devices and energy-efficient amplifiers and drivers.Table of ContentsIntroduction.- Hybrid Data Converters.- Hybrid and Segmented ADC Techniques to Optimize Power Efficiency and Area. The Case of a 0.076mm2 600MS/s 12b SAR-DS ADC.- Interleaved Pipelined SAR ADCs: Combined Power for Efficient Accurate High-Speed Conversion.- Hybrid VCO-based 0-1 MASH and Hybrid DS SAR ADCs.- Hybrid Architecture for Reconfigurable SAR ADC.- A Hybrid ADC for High Resolution: the Zoom-ADC.- Advances in Bio-Medical Sensor Systems for Wearable Health.- An Ultra-Low Power, Robust Photoplethysomographic Readout Exploiting Compressive Sampling, Artifact Reduction and Sensor Fusion.- A 32kHz-DTCXO RTC Module with an Overall Accuracy of ±1ppm and an All-Digital 0.1ppm Compensation-Resolution Scheme.- Energy-Efficient High-Resolution resistor-based temperature sensors.- Ultra-Low Power Charge-Pump-Based Bandgap References.- An Energy-Efficient Integrating Dual-Slope Capacitance-to-Digital Converter.- FD-SOI Technology, Advantages for Analog/RF and Mixed-Signal Designs.- Pipeline and SAR ADCs for Advanced Nodes.- Time-Based Biomedical AFE Readout in Ultra-Low Voltage, Small-Scale CMOS Technology.- An Ultra-Low Power Bluetooth Low-Energy Transceiver for IoT Applications.- Analog/Mixed-Signal Design in FinFET Technologies.- Analog design in 14nm and 28nm.
£107.99
Carl Hanser Verlag GmbH & Co Automotive High Speed Communication Technologies:
Book SynopsisThe demands for processing power, software, and communication are continuously increasing; in all industries and also in the automotive one. In vehicles, the need for higher data rates is driven by more electronic functions in general, but especially by ever more potent (camera) sensors, displays, and high performance ECUs.This book provides a holistic view on new SerDes and Ethernet high-speed communication solutions for cars. It addresses core physical components such as cables, connectors, or PCB design, as well as physical layer processing, use-case-specific protocols, and the use cases as such. It is important to the authors not only to explain the technologies, but also to provide context and background in respect to various technical choices. The intent is to help readers understand the current eco-system end-to-end, whether they are new to the automotive industry or experts who want to deepen their understanding on specific items, whether they are working for a car manufacturer directly or any of the suppliers, whether they are already involved or evaluating to get involved.This is the first book to address the following topics: the >10 Gbps Automotive Ethernet technologies IEEE 802.3cy and IEEE 802.3cz asymmetric Ethernet the new automotive SerDes Standard, the ASA Motion Link the MIPI Automotive SerDes Solutions ( MASS ) power supply over coaxial data cables design for testability in an automotive context
£78.20
Springer-Verlag Berlin and Heidelberg GmbH & Co. KG Photonic Packaging Sourcebook: Fiber-Chip
Book SynopsisThis book serves as a guide on photonic assembly techniques. It provides an overview of today's state-of-the-art technologies for photonic packaging experts and professionals in the field. The text guides the readers to the practical use of optical connectors. It also assists engineers to find a way to an effective and inexpensive set-up for their own needs. In addition, many types of current industrial modules and state-of-the-art applications from single fiber to multi fiber are described in detail. Simulation techniques such as FEM, BPM and ray tracing are explained in depth. Finally, all recent reliability test procedures for datacom and telecom modules are illustrated in combination with related standardization aspects.Table of ContentsIntroduction into Photonic Packaging.- Optical waveguides.- Optical Mode Field Adaptation.- Fiber-chip-coupling.- RF Lines.- Soldering, Adhesive Bonding, Bonding.- Optical Coneection Technology.- Active Adjustment Techniques.- Passive Adjustment Techniques.- Optical Motherboard.- Fiber-Optic Modules.- From Chip Design to the Optimum Package.- Reliability Tests.- Abbreviations.- Index.
£123.49
Springer Fachmedien Wiesbaden Bussysteme in der Fahrzeugtechnik: Protokolle,
Book SynopsisDieses Fachbuch gibt einen Überblick über die in der Kfz-Elektronik verbreiteten Bussysteme wie CAN, FlexRay, LIN oder MOST, deren Protokolle und die Softwarearchitektur moderner Steuergeräte. Die Beschreibung erfolgt aus der Sicht von Ingenieuren, die diese Systeme in der Praxis einsetzen und in Fahrzeuge integrieren müssen. Ausführlich wird auf die höheren Schichten der ISO, SAE und ASAM-Transport- und Diagnoseprotokolle sowie deren Anwendung eingegangen. Neben der Kommunikation wird die Softwarearchitektur der Steuergeräte mit Betriebssystem und Basissoftware vorgestellt, wie sie im Rahmen von AUTOSAR, OSEK/VDX und HIS definiert werden.Neu in dieser Auflage wurden CAN FD, Automotive Ethernet, OTX und WWH-OBD aufgenommen.Table of ContentsBussysteme, Protokolle, Standards und Softwarearchitektur.- Physical und Data Link Layer für CAN, CAN FD, LIN, FlexRay, MOST, Automotive Ethernet, SAE J1939, K-Line, SENT, PSI5, ASRB, DSI, Car-to-Car.- Transportprotokolle.- Diagnoseprotokolle UDS, KWP 2000, OBD, DoIP.- Applikation und Diagnose mit ASAM FIBEX, ODX, OTX.- Softwarestandards: OSEK, HIS, AUTOSAR, Flashlader.- Zeitverhalten von Bus und Betriebssystem.- Werkzeuge, Anwendungen und Einsatzgebiete.
£104.49
Springer Fachmedien Wiesbaden Elektrisch leitfähige Polymerwerkstoffe: Ein
Book SynopsisUlrich Leute beschreibt sowohl polymere Materialien, die elektrische Leitfähigkeit ermöglichen, als auch deren wichtigsten Anwendungsfelder. Die genannten Technik- und Wissenschaftsfelder sind inhaltlich sehr weit voneinander entfernt verortet. Daher beschränkt sich diese Darstellung nicht nur auf ein einziges Arbeitsgebiet, sondern ist fachübergreifend angelegtTable of Contents
£9.99
Springer Fachmedien Wiesbaden Induktivitäten in der Leistungselektronik:
Book SynopsisInduktive Bauelemente spielen eine Schlüsselrolle bei der Entwicklung von Netzgeräten, Wechselrichtern und anderen leistungselektronischen Systemen. Das Lehrbuch beschäftigt sich intensiv mit der Berechnung der parasitären Eigenschaften von Spulen und Transformatoren in Abhängigkeit von ausgewähltem Kern (Geometrie und Material), Wickelgut (Runddraht, Litze, Folie) und internem Aufbau, d.h. Positionierung der Wicklungen im Wickelfenster. Schwerpunkte bilden die unterschiedlichen Verlustmechanismen in Kern und Wicklung, die induktiven und kapazitiven Kopplungen sowie das EMV-Verhalten dieser induktiven Komponenten.Table of ContentsGrundlegende Zusammenhänge.- Die Induktivität und Kapazität von Luftspulen.- Die Wicklungsverluste und ihre Berechnung.- Kerne und Kernmaterialien.- Die Kernverluste und ihre Berechnung.- Einfluss des Kerns auf die Wicklungsverluste.- Transformatoren und ihre parasitären Eigenschaften.- EMV-Aspekte bei induktiven Komponenten.
£66.49
Springer Fachmedien Wiesbaden Zuverlässige Bauelemente für elektronische
Book SynopsisSpeicher, Mikroprozessoren, Opto-, MEMS- und NEMS-Bauteile zusammen mit den passiven Komponenten sind das Hauptthema des Buches. Praktische Methoden zur Untersuchung der Zuverlässigkeit sind ergänzt durch umfangreiche Tabellen und veranschaulicht durch zahlreiche Diagramme. Damit erhält der Leser präzise, praxisnah und umfassend sämtliche Zuverlässigkeitsaspekte einfacher und komplexer elektronischer Bauelemente - von der Fehlerphysik über die Prüffeldpraxis und Ausfallmechanismen bis zur Qualitätsüberwachung.Table of ContentsZuverlässigkeit einbauen.- Verpackungstechnologien und Zuverlässigkeit.- Memristor, der Speicherwiderstand.- Test und Testbarkeit integrierter Schaltungen.- Zuverlässigkeit diskreter passiver Bauelemente.- Zuverlässigkeit von Leistungsbauelementen.- Zuverlässigkeit monolithisch integrierter Schaltungen.- Aspekte der Zuverlässigkeit von Halbleiterspeichern und Mikroprozessoren.- Zuverlässigkeit optoelektronischer Komponenten.- Zuverlässigkeit von Mikro- und Nanosystemen.- Ausfallanalyse.
£98.99
Springer Fachmedien Wiesbaden Partielle Riccati-Differenzialgleichungen
Book SynopsisReiner Thiele leitet die Lösungen partieller Riccati-Differenzialgleichungen her und zeigt den Zusammenhang zwischen allgemeinem Integral und singulärer Lösung auf. Dazu appliziert er eine neue Zerlegungsmethode dieser nichtlinearen Differenzialgleichungen (DGL) in jeweils zwei lineare Gleichungen. Nach der Bestimmung der Eigenwerte liegen die Lösungen vor, die bei Faraday-Effekt-Stromsensoren auftreten und durch eine lineare Beziehung zwischen Messgröße und Messwert gekennzeichnet sind. Praxisrelevante Beispiele für Messgrößen und Messwerte beweisen die große Applikationsbreite der patentierten Faraday-Effekt-Stromsensoren des Autors.Der AutorProf. Dr.-Ing. Reiner Thiele lehrte an der Hochschule Zittau/Görlitz und lehrt an der Staatlichen Studienakademie Bautzen.Table of Contents
£9.99
Springer Fachmedien Wiesbaden Passive elektronische Bauelemente: Aufbau,
Book SynopsisDieses Buch richtet sich an alle, die ein umfassendes Wissen über Herstellung, Aufbau, Eigenschaften, Funktionsweise und Einsatz passiver elektronischer Bauelemente benötigen. Bei deren Anwendung sind viele technische Daten zu beachten, welche dieses Buch zusammen mit Berechnungsgrundlagen zur Verfügung stellt. Theoretische und physikalische Grundlagen ergeben die Basis für Aufbauformen und Herstellungsverfahren. Die Eigenschaften von Bauelementen werden durch die angegebenen Größen und Charakteristiken verständlich, ihre Verwendung verdeutlichen Einsatzbeispiele, auch unter Betrachtung hochfrequenztechnischer Merkmale. Das Werk kann in der Lehre, im Studium sowie als Nachschlagewerk in der Praxis verwendet werden.Table of ContentsMaterialeigenschaften,- Festwiderstände, Potenziometer.- Veränderliche, nichtlineare Widerstände.- Durch Dehnung veränderbarer Widerstand.- Magnetfeldabhängiger Widerstand.- Kondensatoren.- Induktivitäten.- Transformatoren.- Elektrische Leitungen.- Lichtwellenleiter.- Hohlleiter.
£61.74
Springer Fachmedien Wiesbaden Aktive elektronische Bauelemente: Aufbau,
Book SynopsisDas Werk bietet ein umfangreiches Wissen über diskrete und integrierte Bauelemente der Halbleitertechnik. Beim Entwurf elektronischer Schaltungen sind gründliche Kenntnisse über eingesetzte Bauelemente erforderlich, um sowohl technisch als auch wirtschaftlich beste Lösungen zu finden und fehlerfreie Produkte zu realisieren. Als Basis werden die theoretischen und physikalischen Grundlagen der Halbleitertechnik vermittelt. Für alle Halbleiter-Bauelemente werden Aufbau, Wirkungsweise, Kenngrößen, Eigenschaften und Charakteristiken erläutert. Mögliche Anwendungen werden unter Bezug auf die Praxis aufgezeigt. Das Buch kann im Studium, in der Lehre sowie als Nachschlagewerk in der Praxis verwendet werden.Table of ContentsGrundlagen der Halbleiter.- pn-Übergang.- Halbleiterdioden.- Bipolare Transistoren.- Feldeffekttransistoren.- Thyristoren.- Operationsverstärker.- Grundlagen integrierter Halbleiterschaltungen.- Halbleiterspeicher.- Anwendungsspezifische integrierte Bausteine.
£75.99
Springer Fachmedien Wiesbaden Optische Signale und Systeme
Book SynopsisReiner Thiele entwickelt eine neue Theorie für optische Nachrichtensysteme, die ohne die Maxwell-Gleichungen der Elektrotechnik auskommt. Dazu definiert er charakteristische Momente und Funktionen für die Systemelemente einer Punkt-Punkt-Verbindung. Außerdem schlägt der Autor Dreieck-Impulse als Modulationssignal vor. Dadurch entstehen inverse Gabor-Wavelets im Lichtwellenleiter, mit denen die Signalübertragung erfolgt. Dies führt zu effizienten schaltungstechnischen Lösungen an den Endstellen der Übertragungsstrecke. Damit ergibt sich schließlich ein einfaches Verfahren zur Signal-Rekonstruktion im Empfänger.Der Autor: Prof. Dr.-Ing. Reiner Thiele lehrte an der Hochschule Zittau/Görlitz und unterrichtet derzeit an der Staatlichen Studienakademie Bautzen.Table of ContentsCharakteristische Momente und Funktionen der Laserdiode.- Feldverteilung als charakteristische Ortsfunktion und Impulsantwort als charakteristische Zeitfunktion des Lichtwellenleiters (LWL).- Übertragungs-Gleichung mit inversen Gabor-Wavelets.- Charakteristische Momente und Funktionen der Fotodiode und Signal-Rekonstruktion.
£9.99
Springer Fachmedien Wiesbaden Interleaving Concepts for Digital-to-Analog
Book SynopsisModern complementary metal oxide semiconductor (CMOS) digital-to-analog converters (DACs) are limited in their bandwidth due to technological constraints. These limitations can be overcome by parallel DAC architectures, which are called interleaving concepts. Christian Schmidt analyzes the limitations and the potential of two innovative DAC interleaving concepts to provide the basis for a practical implementation: the analog multiplexing DAC (AMUX-DAC) and the frequency interleaving DAC (FI-DAC). He presents analytical and discrete-time models as a theoretical foundation and develops digital signal processing (DSP) algorithms to compensate the analog impairments. Further, he quantifies the impact of various limiting parameters with numerical simulations and verifies both concepts in laboratory experiments.About the Author: Christian Schmidt works at the Fraunhofer Heinrich-Hertz-Institute, Berlin, Germany, on innovative solutions for broadband signal generation in the field of optical communications. The studies for his dissertation were carried out at the Technische Universität Berlin and at the Fraunhofer Heinrich-Hertz-Institute, both Berlin, Germany.Table of ContentsDAC Fundamentals and Interleaving Concepts.- Time Interleaving DAC.- Analog Multiplexing DAC.- Frequency Interleaving DAC.
£94.99
Springer Fachmedien Wiesbaden Modellierung, Analyse und Simulation elektrischer
Book SynopsisDieses Lehrbuch vermittelt Grundwissen zur Lösung von Problemen der Elektrotechnik, der Antriebstechnik und der Mechatronik mit Hilfe des mathematischen Expertensystems Maple™ und des objektorientierten Simulationssystems MapleSim™. Der Autor stellt zunächst Maple™ in konzentrierter Form vor. Danach geht er ausführlich auf die Ermittlung analytischer und numerischer Lösungen von Differentialgleichungen mit Maple™ ein. Der Modellierung und Analyse elektrischer und mechanischer Systeme mit Unterstützung durch Maple™ sowie komplexeren Anwendungsbeispielen sind die folgenden Kapitel des Buches gewidmet. Ausführlich beschrieben werden auch das objektorientierte Modellieren und Simulieren mit MapleSim™ und die Zusammenarbeit von Maple™ mit MapleSim™, Matlab™ und Scilab™.Table of ContentsEinführung in Maple™.- Lösen von Differentialgleichungen.- Modellierung und Analyse elektrischer und mechanischer Systeme.- Laplace-Transformation.- Netzwerkberechnung.- Ortskurven.- Ausgleichsvorgänge.- Schwingungsberechnung.- Analyse und Simulation von Antriebssystemen.- Modellierung von Nichtlinearitäten, diskrete Approximation.- Objektorientierte Modellierung und Simulation mit MapleSim™.- Brücken von Maple™ zu Matlab®/Simulink® und Scilab™/Xcos.
£32.29
Springer Selected Sensor Circuits: From Data Sheet to Simulation
Book SynopsisThis book shows the steps from data sheets of sensors to the extraction of model parameters for the program PSPICE in order to realize circuit analyses. Physical ENTITIES as temperature, humidity, light, pressure and sound are included by equations. The simulation concerns temperature displays, characteristics of humidity-sensors, light-to-voltage Converters, strain gauges, reed relays and Piezol-electric-sounders US-Converters and SAW ComponentsTable of ContentsNTC- and PTC-Sensors.- Band Gap Reference.- Humidity-Sensors.- RGB-Colour-Sensors.- light barreer.- force sensing resistor.- Hall-Sensor.- Piezoelectric sounder.- self-drive and external drive.- US-transmitter and -receiver.- SAW-Delay-Line
£28.49
Springer Fachmedien Wiesbaden Ausgewählte Sensorschaltungen: Vom Datenblatt zur
Book SynopsisIn diesem Buch werden die Schritte angegeben, mit denen man aus den Datenblättern der Sensor-Hersteller die Modellparameter ermitteln kann, die zu einer Schaltungssimulation benötigt werden. Des Weiteren wird gezeigt, wie dem jeweiligen Sensor die Abhängigkeit von Temperatur, Feuchte, Licht, Druck, Kraft oder Magnetfeld in Gleichungsform aufgeprägt werden kann. Zu Sensorschaltungen wie Bandabstandsquelle, Feuchtesensor, IR-Lichtschranke, DMS-Brücke, piezoelektrischer Summer sowie Anwendungen von US-Wandlern und akustischen Oberflächenwellen-Bauelementen werden die PSPICE-Analysen ausführlich dokumentiert. Die simulierten Sensorschaltungen können für sich und als Ausgangspunkt zu Labormessungen im Rahmen der Bachelor-Ausbildung genutzt werden.Table of ContentsNTC- und PTC-Temperatursensoren.- Bandabstandsquelle.- Feuchtesensoren.- Gabelkoppler.- Farbsensor.- Folien-Kraftsensor als Schalter.- DMS am Baustahl-Biegestab.- Hall-Schalter.- Reed-Relais.- Piezoelektrische Summer.- Ultraschall-Abstandswarner.- Akustische Oberflächenwellen-Verzögerungsleitung.- Akustische Oberflächenwellen-Resonatoren.- Gassensoren.
£31.34
Springer Fachmedien Wiesbaden Sensor networks in theory and practice:
Book SynopsisThe book provides an important foundation for understanding the Internet of Things by offering insight into common networking protocols from the microcontroller world and introducing important sensors and other devices, as well as their use and programming. All concepts shown are illustrated with practical circuit and programming examples from the authors' many years of experience. In addition, open libraries for controlling the devices presented in the book are available for readers to download from the publisher's home page. The second edition includes some new devices, especially in the area of networks, a more detailed description of the operating principles of some sensors as well as further tips and tricks for programming.Table of Contents
£49.49
Springer Fachmedien Wiesbaden Prüfungsfragen zur Elektronik: Bachelor
Book SynopsisDie in diesem Lehrbuch gestellten Prüfungsfragen beziehen sich auf die Wirkungsweise von elektronischen Bauelementen und Sensoren auf der Basis von PSPICE-Modellen und deren Anwendung in Schaltungen. Die Antworten werden durch die Angabe von Gleichungen und die Ausführung von PSPICE-Analysen anschaulich unterstützt. Die Prüfungsfragen stehen in enger Verbindung zum Laborpraktikum.Table of ContentsDioden.- Thyristor.- Bipolartransistor.- Optokoppler.- Sperrschicht-Feldeffekttransistor.- MOS Feldeffekttransistoren .- Operationsverstärker.- Prüfungsklausur Elektronik.- Sensoren.
£31.34
Springer Fachmedien Wiesbaden Lösungsverhalten partieller Riccati-Gleichungen
Book SynopsisDas Buch vermittelt Lösungsverfahren für partielle Riccati-Differenzialgleichungen (DGL). Diese DGL appliziert man zur mathematischen Beschreibung der Funktion von Faraday-Effekt-Stromsensoren. Ausgehend vom allgemeinen Lösungsverhalten erfolgt die Definition des individuellen sowie kollektiven Lösungsverhaltens einer beliebigen Gleichung. Reiner Thiele erklärt den Unterschied zwischen Individual- und Partiallösungen. Außerdem kreiert er Simulationsdiagramme und zeigt, dass es sich bei der Hardware um Regelkreise handelt. Table of ContentsEinleitung.- 2 Partielle Typ1-Riccati-DGL.- 3 Partielle Typ2-Riccati-DGL.- 4 Zusammenfassung.
£9.99
Springer Fachmedien Wiesbaden Elemente der Elektronik - Repetitorium und
Book SynopsisDas Buch enthält thematisch gegliederte Aufgaben, die einen durchgängigen dreiteiligen Aufbau zeigen: In Teil A werden Aufgaben mit schrittweiser Lösungsanleitung behandelt, die einen Einstieg in die Thematik ermöglichen. Teil B bringt Testaufgaben, um selbstständig eine Lernkontrolle durchzuführen. In Teil C werden klausurrelevante Prüfungsaufgaben vorgestellt, die ein erfolgreiches Bestehen von Prüfungen sichern. Die Aufgaben stammen aus folgenden Themenbereichen: Widerstände und Dioden - Kondensatoren - Spulen und Transformatoren - Feldeffekttransistoren - Bipolare Transistoren - OperationsverstärkerTable of ContentsWiderstände - Dioden - Kondensatoren - Spulen und Transformatoren - Feldeffekttransistoren - Bipolare Transistoren - Operationsverstärker
£26.59
Springer Fachmedien Wiesbaden Simulation von Röhrenverstärkern mit SPICE:
Book SynopsisAudio-Röhrenverstärker erfreuen sich wachsender Beliebtheit im Hochpreissegment. Die Verfügbarkeit moderner Bauelemente, neue Schaltungskonzepte und die Erfahrungen aus dem Transistorverstärkerbau lassen das Interesse an Neu- und Weiterentwicklungen von Röhrenverstärkern steigen. Elektronikentwicklung mit Hilfe des universellen Schaltungssimulationsprogramms SPICE bilden eine vollkommene Einheit. Das Buch, einzigartig in diesem Bereich, will die Entwickler und die zahlreichen Amateure mit SPICE zusammenbringen.Das Buch hat drei Schwerpunkte: die Modellierung von Verstärkerröhren, die Anwendung von SPICE für die Untersuchung von Schaltungskonzepten und die Vorstellung moderner Schaltungstechniken, die mit SPICE analysiert werden können.Table of ContentsSchaltungssimulation mit SPICE.- PC-Implementierungen von SPICE, das kostenfreie graphische LTSpice.- Die grundlegenden Schaltungsanalysen am Beispiel passiver Netzwerke.- Modellierung von Verstärkerröhren.- SPICE-Simulation von Röhrenverstärkerschaltungen.- SPICE-Simulationstechniken für Fortgeschrittene.- Rückkopplungen, Stabilität und Frequenzgangskorrekturen.
£71.24
Springer, India, Private Ltd Complex Binary Number System: Algorithms and
Book SynopsisThis book is a compilation of the entire research work on the topic of Complex Binary Number System (CBNS) carried out by the author as the principal investigator and members of his research groups at various universities during the years 2000-2012. Pursuant to these efforts spanning several years, the realization of CBNS as a viable alternative to represent complex numbers in an “all-in-one” binary number format has become possible and efforts are underway to build computer hardware based on this unique number system. It is hoped that this work will be of interest to anyone involved in computer arithmetic and digital logic design and kindle renewed enthusiasm among the engineers working in the areas of digital signal and image processing for developing newer and efficient algorithms and techniques incorporating CBNS.Trade ReviewFrom the reviews:“This is a monograph presenting the results of a dozen or so years research of the author devoted to purely binary representation of complex numbers and design of circuits for arithmetic operations on them. … The topic of this book may be recommended as a facultative lecture for academic courses on digital arithmetic.” (Antoni Michalski, Zentralblatt MATH, Vol. 1262, 2013)Table of ContentsIntroduction.- Conversion Algorithms.- Arithmetic Algorithms.- Arithmetic Circuits Designs.- Complex Binary Associative Processor Design.- Conclusion and Further Research.
£42.74
BPB Publications Modern Portable Colour Television Circuits Vol.
Book Synopsis
£4.86
River Publishers Selected Topics in Biomedical Circuits and
Book SynopsisIntegrated circuits and microsystems play a vital role in a variety of biomedical applications including life-saving/changing miniature medical devices, surgical procedures with less invasiveness and morbidity, low-cost preventive healthcare solutions for daily life, solutions for effective chronic disease management, point-of-care diagnosis for early disease detection, high-throughput bio sequencing and drug screening and groundbreaking brain-machine interfaces based on a deep understanding of human intelligence. In response to such strong demands for biomedical circuits and systems, a considerable amount of effort has been devoted to the research and development in this area, both by industry and academia, over recent years.This book, which belongs to the “Tutorials in Circuits and Systems” series, provides readers with an overview of new developments in the field of biomedical circuits and systems. It covers basic information about system-level and circuit-level requirements, operation principles, key factors of considerations, and design/implementation techniques, as well as recent advances in integrated circuits and microsystems for emerging biomedical applications.Technical topics covered in this book include: Biomedical Microsystem Integration; Biomedical Sensor Interface Circuits; Neural Stimulation Circuits; Wireless Power Transfer Circuits for Biomedical Microsystems; Artificial Intelligence Processors for Biomedical Circuits and Systems; Neuro-Inspired Computing and Neuromorphic Processors for Biomedical Circuits and Systems.This book is ideal for personnel in medical devices and biomedical engineering industries as well as academic staff and postgraduate/research students in biomedical circuits and systems.Table of ContentsSelected Topics in Biomedical Circuits and Systems
£90.24
River Publishers DC/AC Electrical Fundamentals
Book SynopsisThis book explores many essential topics in a basic and easy-to-understand manner. This book, and the accompanying Electronic Devices and Circuit Fundamentals, have been modified with significant updates in content. The books are developed using a classic textbook – Electricity and Electronics: A Survey (5th Edition) – as a framework. Both new books have been structured using a similar sequence and organization as previous editions. The previous edition of Electricity and Electronics: A Survey contained 18 chapters, 8 in the Electricity section and 10 in the Electronics section.This book has been expanded to include 19 chapters, further simplifying content, and providing a more comprehensive coverage of the content. The content has been continually updated and revised through new editions and by reviewers over the years. Additional quality checks to ensure technical accuracy, clarity and coverage of content have always been an area of focus.Each edition of the text has been improved through the following features: Improved and updated text content Improved usage of illustrations and photos Use of color to add emphasis and clarify content. Table of Contents1. DC (Direct Current) Electrical Fundamentals 2. Electrical Components and Measurements 3. Ohm’s Law and Series Electrical Circuits 4. Parallel Circuits 5. Series – Parallel Circuits and Applications 6. Magnetism and Electromagnetism 7. Sources of DC Electrical Energy 8. AC (Alternating Current) Electrical Fundamentals 9. Sources of AC Electrical Energy 10. Capacitors and Capacitive Reactance 11. Inductance and Inductive Reactance 12. Transformers 13. R–C (Resistive–Capacitive) Circuits 14. R–L (Resistive–Inductive) Circuits 15. R–L–C (Resistive–Inductive–Capacitive) Circuits 16. Time Constant and Wave-shaping Circuits 17. Math for AC Circuits 18. AC Problem Solving Circuits 19. AC Electrical Energy Conversion
£104.50
