Robotics Books

Book SynopsisInfrastructures are ageing and have become a subject of profound concern, awakening our collective consciousness to the imperatives of civil and structural integrity. This concern, compounded by the unrelenting impact of climate change and the burgeoning demand on transport networks and infrastructures, underscores the critical necessity of preserving infrastructural functionality, safety, and alignment with their original design objectives. In doing so, we strive to mitigate health, financial, societal, and environmental risks that these infrastructures may pose. Presently, the imperative is to maintain a vigilant and continuous watch over these critical assets, employing factual, real-time data to support efficient maintenance strategies.This book embarks on a comprehensive exploration of the contemporary industrial challenges surrounding critical infrastructure inspection and maintenance. It offers a detailed examination of current inspection methodologies, manual intervention practices, and the intricate challenges involved in the sustained, systematic evaluation of structural integrity. Subsequently, it delivers an exhaustive analysis and technical elucidation of recent research breakthroughs across various infrastructures and industrial domains. These innovations, deeply rooted in robotics, automation, and digital technologies, augment, support, streamline, and often redefine established paradigms in the realms of inspection and maintenance. Among these innovations are the outcomes of research endeavours co-funded by the European Commission, addressing a spectrum of research priorities and thematic areas.The solutions delineated in this book encompass an array of cutting-edge technologies, from robotic ground vehicles to unmanned aerial systems, digital platforms, advanced sensing solutions, and state-of-the-art visualization and 3D imaging technologies. These technologies foster enhanced data acquisition, precise reporting, and ultimately, more efficient inspection and maintenance approaches. As we navigate through the years ahead, the inevitability of ageing infrastructures looms large, while the tangible value of modern technologies is already manifesting in numerous industrial applications. Though the journey may be arduous, the assimilation of digital technologies into existing infrastructure inspection and maintenance frameworks is gaining traction and acceptance, aligning with the overarching vision articulated within this book.

Read more less

Do It Together!Making is better when you're doing it with friends! In Make: Volume 58, we explore different ways to tackle large scale projects that are way bigger than one person can handle alone. In our cover story, get the scoop on how a team of engineers built giant robot Megabot to fight for glory in the world's first real-life mecha battle. Then, discover the latest in robo races and build your own autonomous R/C car.You'll find 14 projects inside, including: Send stealthy messages with Morse code over the internetPlay electronic audio games by drawing circuits with conductive inkKeep kitty entertained with a chaotic double pendulum toyAnd more!

Read more less

Book SynopsisArduino 101 houses an Intel Curie module which offers a better performance at a lower power footprint. The module has two 32-bit MCUs - an x86 Intel Quark processor and an ARC EM4 processor along with 384kB flash memory and 80kB SRAM. These onboard MCUs combine a variety of new technologies including wireless communication via Bluetooth Low Energy, 6 axis motion sensor with an accelerometer, and a gyroscope. With this book, you will:Explore neural net pattern matching Have the Arduino learn gesture recognitionPerfect for students, teachers, and hobbyists who need just enough information to get started with the Arduino 101

Read more less

Book SynopsisEurope has paid a high price for asbestos, with over 100 000 related deaths. First in line in the fight to free buildings from asbestos contamination, workers in the construction sector could soon find a helping hand in the form of an AI-piloted robotic system.The constant and multifaceted evolution of society has left very few industries unchanged. For most sectors, this has meant moving towards increased automation. Most, but not all. One unyielding sector has largely stayed true to its old ways: the construction sector. For the past 200 years, the same repetitive, standardised and physically challenging construction tasks have been performed by workers with their own two hands. But this could change soon, as emerging voices - some of which decided to stand together under the Bots2ReC (Robots to Re-Construction) project - have been calling for the sector to embrace automation. The reasoning behind Bots2ReC is simple: some tasks are simply too hazardous for humans to perform, and machines could easily replace them. Besides the exposure, some processes or the materials handled in those processes generate health hazards in the form of dust, vibration, noise or toxic substances. It is precisely for these tasks that we could expect great benefits from - and also show the massive potential of - automation to achieve sustainable socio-ecological improvements.With its focus on asbestos, the EU H2020 Bots2ReC project is focusing on reducing the future health burden on workers. There is little doubt that the cost of the technology will easily be counterbalanced by its high social benefit and economic efficiency. This books presents the findings and results of the Bots2ReC project, and should be useful for Construction and Robotics Engineers, as well as graduate level students and researchers active in these fields.Table of Contents 1. Introduction 2. Asbestos Removal Process 3. Robotic Systems for Removing Asbestos 4. Algorithms for Removing Asbestos 5. Results and Performances of Automated Asbestos Removal 6. Summary, Conclusion and Outlook

Read more less

Book SynopsisLocalization for underwater robots remains a challenging issue. Typical sensors, such as Global Navigation Satellite System (GNSS) receivers, cannot be used under the surface and other inertial systems suffer from a strong integration drift. On top of that, the seabed is generally uniform and unstructured, making it difficult to apply Simultaneous Localization and Mapping (SLAM) methods to perform localization. Reliable Robot Localization presents an innovative new method which can be characterized as a raw-data SLAM approach. It differs from extant methods by considering time as a standard variable to be estimated, thus raising new opportunities for state estimation, so far underexploited. However, such temporal resolution is not straightforward and requires a set of theoretical tools in order to achieve the main purpose of localization. This book not only presents original contributions to the field of mobile robotics, it also offers new perspectives on constraint programming and set-membership approaches. It provides a reliable contractor programming framework in order to build solvers for dynamical systems. This set of tools is illustrated throughout this book with realistic robotic applications.Table of ContentsPreface xi Notations xiii Abbreviations xvii Introduction xix Part 1. Interval Tools 1 Introduction to Part 1 3 Chapter 1. Static Set-membership State Estimation 5 1.1. Introduction 5 1.2. Interval analysis 8 1.2.1. Once upon a time 8 1.2.2. Intervals 10 1.2.3. Inclusion functions 14 1.2.4. Pessimism and wrapping effect 16 1.3. Constraint propagation 19 1.3.1. Constraint networks 19 1.3.2. Contractors 21 1.3.3. Application to static range-only robot localization 24 1.4. Set-inversion via interval analysis 25 1.4.1. Subpaving 25 1.4.2. SIVIA algorithm for set-inversion 28 1.4.3. Illustration involving contractions 29 1.4.4. Kernel characterization of an interval function 33 1.5. Discussions 35 1.5.1. From sensors to reliable results 36 1.5.2. Numerical libraries 37 1.5.3. Reliable tool for proof purposes 38 1.6. Conclusion 38 Chapter 2. Constraints Over Sets of Trajectories 41 2.1. Towards dynamic state estimation 41 2.1.1. Overall motivations 41 2.1.2. The approach presented in this book 43 2.2. Tubes 44 2.2.1. Definitions 44 2.2.2. Tube analysis 45 2.2.3. Contractors 48 2.3. Implementation 50 2.3.1. Data structure 52 2.3.2. Build a tube from real datasets 54 2.3.3. Tubex, dedicated tube library 57 2.4. Application: dead-reckoning of a mobile robot 57 2.4.1. Test case 58 2.4.2. Constraint network 58 2.4.3. Resolution 59 2.5. Discussions 60 2.5.1. Limits 60 2.5.2. Extract the most probable trajectory from a tube 61 2.5.3. Application to path planning 62 2.6. Conclusion 63 Part 2. Constraints-related Contributions 65 Introduction to Part 2 67 Chapter 3. Trajectories under Differential Constraints 69 3.1. Introduction 69 3.1.1. The differential problem 69 3.1.2. Attempts with set-membership methods 70 3.1.3. Contribution of this work 72 3.2. Differential contractor for L d/dt: ẋ(·) = v(·) 73 3.2.1. Definition and proof 74 3.2.2. Contraction of the derivative 79 3.2.3. Implementation 80 3.3. Contractor-based approach for state estimation 82 3.3.1. Constraint network of state equations 84 3.3.2. Fixed-point propagations 85 3.3.3. Theoretical example of interest ẋ = −sin(x) 87 3.4. Robotic applications 90 3.4.1. Causal kinematic chain 90 3.4.2. Higher-order differential constraints 93 3.4.3. Kidnapped robot problem 93 3.4.4. Actual experiment with the Daurade AUV 94 3.5. Conclusion 99 Chapter 4. Trajectories Under Evaluation Constraints 101 4.1. Introduction 101 4.1.1. Contribution of this work 101 4.1.2. Motivations to deal with time uncertainties 102 4.2. Generic contractor for trajectory evaluation 105 4.2.1. Tube contractor for the constraint Leval : z = y(t) 105 4.2.2. Implementation 111 4.2.3. Application to state estimation 113 4.3. Robotic applications 114 4.3.1. Range-only robot localization with low-cost beacons 114 4.3.2. Reliable correction of a drifting clock 121 4.4. Conclusion 127 Part 3. Robotics-related Contributions 129 Introduction to Part 3 131 Chapter 5. Looped Trajectories: From Detections to Proofs 133 5.1. Introduction 133 5.1.1. The difference between detection and verification 133 5.1.2. Proprioceptive versus exteroceptive measurements 134 5.1.3. The two-dimensional case 135 5.2. Proprioceptive loop detections 135 5.2.1. Formalization 136 5.2.2. Loop detections in a bounded-error context 137 5.2.3. Approximation of the solution set T 138 5.3. Proving loops in detection sets 141 5.3.1. Formalism: zero verification 141 5.3.2. Topological degree for zero verification 141 5.3.3. Loop existence test 145 5.3.4. Reliable number of loops 149 5.4. Applications 151 5.4.1. The Redermor mission 152 5.4.2. The Daurade mission 156 5.4.3. Optimality of the approach 159 5.5. Conclusion 163 Chapter 6. A Reliable Temporal Approach for the SLAM Problem 165 6.1. Introduction 165 6.1.1. Motivations 165 6.1.2. SLAM formalism 167 6.1.3. Inter-temporalities 169 6.2. Temporal SLAM method 172 6.2.1. General assumptions 172 6.2.2. Temporal resolution 173 6.2.3. Lp⇒z: inter-temporal implication constraint 174 6.2.4. The Cp⇒z contractor 178 6.2.5. Temporal SLAM algorithm 186 6.3. Underwater application: bathymetric SLAM 190 6.3.1. Context 190 6.3.2. Daurade’s underwater mission, October 20, 2015 194 6.3.3. Daurade’s underwater mission, October 19, 2015 199 6.3.4. Overview of the environment 202 6.4. Discussions 203 6.4.1. Relation to the state of the art 203 6.4.2. About a Bayesian resolution 205 6.4.3. Biased sensors 205 6.4.4. Fluctuating measurements 205 6.5. Conclusion 207 Conclusion 211 References 217 Index 229

Read more less

Book SynopsisThis book presents the most recent research results on modeling and control of robot manipulators. Chapter 1 gives unified tools to derive direct and inverse geometric, kinematic and dynamic models of serial robots and addresses the issue of identification of the geometric and dynamic parameters of these models. Chapter 2 describes the main features of serial robots, the different architectures and the methods used to obtain direct and inverse geometric, kinematic and dynamic models, paying special attention to singularity analysis. Chapter 3 introduces global and local tools for performance analysis of serial robots. Chapter 4 presents an original optimization technique for point-to-point trajectory generation accounting for robot dynamics. Chapter 5 presents standard control techniques in the joint space and task space for free motion (PID, computed torque, adaptive dynamic control and variable structure control) and constrained motion (compliant force-position control). In Chapter 6, the concept of vision-based control is developed and Chapter 7 is devoted to specific issue of robots with flexible links. Efficient recursive Newton-Euler algorithms for both inverse and direct modeling are presented, as well as control methods ensuring position setting and vibration damping. Table of ContentsChapter 1. Modeling and Identification of Serial Robots (Wisama KHALIL and Etienne DOMBRE). 1.1. Introduction. 1.2. Geometric modeling. 1.3. Kinematic modeling. 1.4. Calibration of geometric parameters. 1.5. Dynamic modeling. 1.6. Identification of dynamic parameters. 1.7. Conclusion. 1.8. Bibliography. Chapter 2. Modeling of Parallel Robots (Jean-Pierre MERLET and François PIERROT). 2.1. Introduction. 2.2. Machine types. 2.3. Inverse geometric and kinematic models. 2.4. Direct geometric model. 2.5. Bibliography. Chapter 3. Performance Analysis of Robots (Philippe WENGER). 3.1. Introduction. 3.2. Accessibility. 3.3. Workspace of a robot manipulator. 3.4. Concept of aspect. 3.5. Concept of connectivity. 3.6. Local performances. 3.7. Conclusion. 3.8. Bibliography. Chapter 4. Trajectory Generation (Moussa HADDAD, Taha CHETTIBI, Wisama KHALIL and Halim LEHTIHET). 4.1. Introduction. 4.2. Point-to-point trajectory in the joint space under kinematic constraints. 4.3. Point-to-point trajectory in the task-space under kinematic constraints. 4.4. Trajectory generation under kinodynamic constraints. .4.5. Examples. .4.6. Conclusion. 4.7. Bibliography. Appendix: Stochastic Optimization Techniques. Chapter 5. Position and Force Control of a Robot in a Free or Constrained Space (Pierre DAUCHEZ and Philippe FRAISSE). 5.1. Introduction. 5.2. Free space control. 5.3. Control in a constrained space. 5.4. Conclusion. 5.5. Bibliography. Chapter 6. Visual Servoing (François CHAUMETTE). 6.1. Introduction. 6.2. Modeling visual features. 6.3. Task function and control scheme. 6.4. Other exteroceptive sensors. 6.5. Conclusion. 6.6. Bibliography. Chapter 7. Modeling and Control of Flexible Robots (Frédéric BOYER, Wisama KHALIL, Mouhacine BENOSMAN and George LEVEY). 7.1. Introduction. 7.2. Modeling of flexible robots. 7.3. Control of flexible robot manipulators. 7.4. Conclusion. 7.5. Bibliography. List of Authors. Index.

Read more less

Book SynopsisIn today’s high-pressured world, digital transformation is everywhere on the agendas of corporate boards and has risen to the top of CEOs’ strategic plans. Artificial intelligence, blockchain, 3D printing, the Internet of Things, and drones are some of the emerging technologies that are already transforming our world. In this fast changing domain— predicted by few and now reality for all how can companies transform today’s challenges into tomorrow’s opportunities?This book is targeted to help a broad audience such as students, professionals, business, and technology managers to transform an old-world brick and mortar organization to a new-world digital leader. The author addresses various questions including: what essential components does digital transformation include, and how does it impact the enterprise? How does convergence of emerging technologies benefit your organization? How can you start transformation and technology planning projects?

Read more less

Book Synopsis Cyber-Physical Systems (CPS) integrate computing and communication capabilities by monitoring and controlling the physical systems via embedded hardware and computers. This book brings together new and futuristic findings on IoT, Cyber Physical Systems and Robotics leading towards Automation and solving issues of various critical applications in Real-time. The book initially overviews the concepts of IoT, IIoT and Cyber Physical Systems followed by various critical applications and discusses the latest designs and developments that provide common solutions for the convergence of technologies. In addition, the book specifies methodologies, algorithms and other relevant architectures in various fields that include Automation, Robotics, Smart Agriculture and Industry 4.0.The book is intended for practitioners, enterprise representatives, scientists, students and Ph.D Scholars in hopes of steering research further towards cyber physical systems design and development and implementation across various domains. Additionally, this book can be used as a secondary reference, or rather one-stop guide, by professionals for real-life implementation of cyber physical systems.The book highlights:• A Critical Coverage of various domains: IoT, Cyber Physical Systems, Industry 4.0, Smart Automation and related critical applications.• Advanced elaborations for target audiences to understand the conceptual methodology and future directions of cyber physical systems and IoT.• An approach towards Research Orientations to enable researchers to point out areas and scope for implementation of Cyber Physical Systems in several domains for better productivity. Table of Contents

Read more less

Book SynopsisThis Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics.The objective of MHI Colloquium is the successful networking at both academic and management level. Thereby, the colloquium focuses an academic exchange at a high level in order to distribute the obtained research results, to determine synergy effects and trends, to connect the actors in person and in conclusion, to strengthen the research field as well as the MHI community. In addition, there is the possibility to become acquatined with the organizing institute. Primary audience is formed by members of the scientific society for assembly, handling and industrial robotics (WGMHI). Table of ContentsAssembly Planning: Generic Modeling Technique for flexible and highly available Assembly Systems.- Transmitter Positioning of Distributed Large-scale Metrology within Lineless Mobile Assembly Systems.- Optimized High Precision Stacking of Fuel Cell Components for Medium to Large Production Volumes.- Mobile, Modular and Adaptive Assembly Jigs for Large-scale Products.- Design of an Automated Assembly Station for Process Development of All-Solid-State Battery Cell Assembly.-Grasping: Combined Structural and Dimensional Synthesis of a Parallel Robot for Cryogenic Handling Tasks.- Secure Clamping of Parts for Disassembly for Remanufacturing.- Aerial grasping and transport using an unmanned aircraft (UA) equipped with an industrial suction gripper.- Computing Gripping Points in 2D Parallel Surfaces via Polygon Clipping.- Concept for robot-based cable assembly regarding industrial production.- Human-Machine Interaction: Improving the understanding of a remote environment by immersive Man-Machine interaction.- Towards a Modular Elbow Exoskeleton: Concepts for Design and SystemControl.- Adaptive Motion Control Middleware for Teleoperation based on Pose Tracking and Trajectory Planning.- Approach of a Decision Support Matrix for the Implementation of Exoskeletons in Industrial Workplaces.- An approach to integrate a blockchain-based payment model and independent secure documentation for a Robot as a Service.- Human-Robot Collaboration: Human Body Simulation within a Hybrid Operating Method for a Safe and Efficient Human-Robot Collaboration.- Towards Semi Automated Pre-assembly for Aircraft Interior Production.- An approach for direct offline programming of high precision assembly tasks on 3D scans using tactile control and automatic program adaption.- Industry 4.0: Implementation of innovative manufacturing technologies in foundries for large-volume components.- The Digital Twin as a mediator for the digitalization and conservation of expert knowledge.- Web Service for Point Cloud supported Robot Programming using Machine Learning.- Using of Augmented Reality for improved Human-Machine interaction and Real-Time Error Correction of Laboratory Units.- Scalability of assembly line automation based on the integrated product development approach.- Machine Vision: Robot-based Creation of Complete 3D Workpiece Models.- Classification of assembly operations using recurrent neural networks.- Configuration and enablement of vision sensor solutions through a combined simulation based process chain.- Towards Synthetic AI Training Data for Image Classification in Intralogistic Settings.- Evaluation of ML-based Grasping Approaches inthe Field of Automated Assembly.- Robot Programming: Playback Robot Programming Framework for Fiber Spray Processes.- LiDAR-Based Localization for Formation Control of Multi-Robot Systems.- Playback Robot Programming With Loop Increments.- Web-based platform for the configuration of robot applications: A retrospective view on the research project ROBOTOP.- Partial Automated Multi-Pass-Welding for Thick Sheet Metal Connections.

Read more less

Book SynopsisThis textbook offers a tutorial introduction to robotics and Computer Vision which is light and easy to absorb. The practice of robotic vision involves the application of computational algorithms to data. Over the fairly recent history of the fields of robotics and computer vision a very large body of algorithms has been developed. However this body of knowledge is something of a barrier for anybody entering the field, or even looking to see if they want to enter the field — What is the right algorithm for a particular problem?, and importantly: How can I try it out without spending days coding and debugging it from the original research papers? The author has maintained two open-source MATLAB Toolboxes for more than 10 years: one for robotics and one for vision. The key strength of the Toolboxes provide a set of tools that allow the user to work with real problems, not trivial examples. For the student the book makes the algorithms accessible, the Toolbox code can be read to gain understanding, and the examples illustrate how it can be used —instant gratification in just a couple of lines of MATLAB code. The code can also be the starting point for new work, for researchers or students, by writing programs based on Toolbox functions, or modifying the Toolbox code itself. The purpose of this book is to expand on the tutorial material provided with the toolboxes, add many more examples, and to weave this into a narrative that covers robotics and computer vision separately and together. The author shows how complex problems can be decomposed and solved using just a few simple lines of code, and hopefully to inspire up and coming researchers. The topics covered are guided by the real problems observed over many years as a practitioner of both robotics and computer vision. It is written in a light but informative style, it is easy to read and absorb, and includes a lot of Matlab examples and figures. The book is a real walk through the fundamentals light and color, camera modelling, image processing, feature extraction and multi-view geometry, and bring it all together in a visual servo system. “An authoritative book, reaching across fields, thoughtfully conceived and brilliantly accomplished Oussama Khatib, StanfordTable of ContentsIntroduction.- Part I: Foundations- Representing Position and Orientation.- Part II: Computer Vision.- Light and Color.- Images and Image Processing.- Image Feature Extraction.- Part III: The Geometry of Vision.- Image Formation.- Using Multiple Images.- Index.

Read more less

Book SynopsisThis textbook offers a tutorial introduction to robotics and control which is light and easy to absorb. The practice of robotics and control both involve the application of computational algorithms to data. Over the fairly recent history of the fields of robotics and control a very large body of algorithms has been developed. However this body of knowledge is something of a barrier for anybody entering the field, or even looking to see if they want to enter the field — What is the right algorithm for a particular problem?, and importantly: How can I try it out without spending days coding and debugging it from the original research papers? The author has maintained two open-source MATLAB Toolboxes for more than 10 years: one for robotics and one for vision. The key strength of the Toolboxes provides a set of tools that allow the user to work with real problems, not trivial examples. For the student the book makes the algorithms accessible, the Toolbox code can be read to gain understanding, and the examples illustrate how it can be used —instant gratification in just a couple of lines of MATLAB code. The code can also be the starting point for new work, for researchers or students, by writing programs based on Toolbox functions, or modifying the Toolbox code itself. The purpose of this book is to expand on the tutorial material provided with the toolboxes, add many more examples, and to weave this into a narrative that covers robotics and control separately and together. The author shows how complex problems can be decomposed and solved using just a few simple lines of code, and hopefully to inspire up and coming researchers. The topics covered are guided by the real problems observed over many years as a practitioner of both robotics and control. It is written in a light but informative style, it is easy to read and absorb, and includes a lot of Matlab examples and figures. The book is a real walk through the fundamentals of robot kinematics, dynamics and joint level control, and covers both mobile robots (control, path planning, navigation, localization and SLAM) and arm robots (forward and inverse kinematics, Jacobians, dynamics and joint level control). “An authoritative book, reaching across fields, thoughtfully conceived and brilliantly accomplished!” Oussama Khatib, StanfordTrade Review“Written in a light but quite informative style, the book is intended for students and scientists and should be of interest to practicing and research engineers as well as Ph.D. students in the field of modeling and control of spatial mechanisms, manipulators and robots.” (Clementina Mladenova, zbMATH 1492.93004, 2022)Table of ContentsIntroduction.- Representing Position and Orientation.- Time and Motion.- Mobile Robots.- Navigation.- Localization.- Robot Arm Kinematics,- Manipulator Velocity.- Dynamics and Control.- Appendices.

Read more less

Book SynopsisThis book focuses on the importance of human factors in the development of safe and reliable robotic and unmanned systems. It discusses solutions for improving the perceptual and cognitive abilities of robots, developing suitable synthetic vision systems, coping with degraded reliability in unmanned systems, and predicting robotic behavior in relation to human activities. It covers the design of improved, easy to use, human–system interfaces, together with strategies for increasing human–system performance, and reducing cognitive workload at the user interface. It also discusses real-world applications and case studies of human-robot and human-agent collaboration in different business and educational endeavors. The second part of the book reports on research and developments in the field of human factors in cybersecurity.Contributions cover the technological, social, economic and behavioral aspects of the cyberspace, providing a comprehensive perspective to manage cybersecurity risks. Based on the two AHFE 2021 Conferences such as the AHFE 2021 Conference on Human Factors in Robots, Drones and Unmanned Systems, and the AHFE 2021 Conference on Human Factors in Cybersecurity, held virtually on 25–29 July, 2021, from USA, this book offers extensive information and highlights the importance of multidisciplinary approaches merging engineering, computer science, business and psychological knowledge. It is expected to foster discussion and collaborations between researchers and practitioners with different background, thus stimulating new solutions for the development of reliable and safe, human-centered, highly functional devices to perform automated and concurrent tasks, and to achieve an inclusive, holistic approach for enhancing cybersecurity.Table of ContentsConcept for cross-platform delegation of heterogeneous UAVs in a MUM-T environment.- Swarms, teams, or choirs? Metaphors in multi-UAV systems design.- Visual communication with UAS: Estimating parameters for gestural transmission of task descriptions.- A distributed mission-planning framework for shared UAV use in multi-operator MUM-T applications.- Conditional behavior: Human delegation mode for unmanned vehicles under selective Datalink availability.- Lethal Autonomous Weapon Systems (LAWS): An advocacy paper.- Measuring the impact of a navigation aid in unmanned ship handling via a shore control center.- A computational assessment of ergonomics in an industrial human-robot collaboration workplace using system dynamics.

Read more less

Book SynopsisProblems of joint application of heterogeneous ground and air robotic means while performing the agricultural technological tasks that require physical interaction with agricultural products and the environment are discussed in the book. Proposed solutions for the exchange of energy and physical resources of unmanned aerial vehicles on ground service platforms, automation of the process of collecting agricultural products and ensuring the stability of the air manipulation system at physical interaction with a ground object are important for the transport and agricultural industry robotization.The book addresses the researchers investigating interdisciplinary issues of agricultural production robotization, problems of information, physical and energy interaction of ground and air robots; recommended to postgraduates and students studying "Mechatronics and robotics" and "Technologies, mechanization and power equipment in agriculture, forestry and fisheries."Table of ContentsChapter 1: Analysis of Existing Approaches to the Service Automation and to Interaction Control of Heterogeneous Agricultural Robots.- Chapter 2: Models and Algorithms of Interaction between Heterogeneous Agricultural Robots.- Chapter 3: Recommendation System to Select the Composition of the Heterogeneous Agricultural Robots.- Chapter 4: Experimental Estimation of Means Developed for Interaction between Heterogeneous Agricultural Robots.- Chapter 5: Theoretical Foundations to Control Technological and Robotic Operations with Physical Manipulations of Agricultural Products.

Read more less

Book SynopsisThis book moves from a thorough investigation of human capabilities during movements and interactions with objects and environment and translates those principles into the design planning and control of innovative mechatronic systems, providing significant advancements in the fields of human–robot interaction, autonomous robots, prosthetics and assistive devices. The work presented in this monograph is characterized by a significant paradigmatic shift with respect to typical approaches, as it always place the human at the center of the technology developed, and the human represents the starting point and the actual beneficiary of the developed solutions. The content of this book is targeted to robotics and neuroscience enthusiasts, researchers and makers, students and simple lovers of the matter.Table of ContentsIntroduction.- Part I: Taming the Complexity of Human Motion Generation.- Understanding the Principal Modes of Natural Movements in Temporal Domain.- Quantifying the Time-Invariance Properties of Upper Limb Synergies.- Evidences on the Hierarchical Control of Human Hands.- Part II: On the Design of Nature-Inspired Prostheses and the Assessment of Motion Impairment.- Using Nature-Inspired Principles to Design of Robotic Limbs: the Soft Wrist.- A Novel Approach to Quantify Motion Impairment.- A novel mechatronic system for evaluating elbow muscular spasticity relying on Tonic Stretch Reflex Threshold estimation.- Part III: Transferring Human Principles to Cobots and Autonomous Robots.- Natural Motion: Embedding Human-Likeliness in Robot Movements.- A Focus on Motion Dynamics: Planning Impedance Behaviors in Physical Interaction.- Learning from Humans How to Grasp: a Reactive-Based Approach.- Learning from Humans How to Grasp: Enhancing the Reaching Strategy.- Learning to prevent grasp failure with soft hands: from on-line prediction to dual-arm grasp recovery.- Dexterity Augmentation of Robotic Hands: a Study on the Kinetic Domain.- Exploiting Principal Components for Robots Walking: an Approach for Sub-Optimal Locomotion.- Conclusions and Lessons Learned.

Read more less

Book SynopsisDistributed Coordination Theory for Robot Teams develops control algorithms to coordinate the motion of autonomous teams of robots in order to achieve some desired collective goal. It provides novel solutions to foundational coordination problems, including distributed algorithms to make quadrotor helicopters rendezvous and to make ground vehicles move in formation along circles or straight lines. The majority of the algorithms presented in this book can be implemented using on-board cameras. The book begins with an introduction to coordination problems, such as rendezvous of flying robots, and modelling. It then provides a solid theoretical background in basic stability, graph theory and control primitives. The book discusses the algorithmic solutions for numerous distributed control problems, focusing primarily on flying robotics and kinematic unicycles. Finally, the book looks to the future, and suggests areas discussed which could be pursued in further research. This book will provide practitioners, researchers and students in the field of control and robotics new insights in distributed multi-agent systems.Trade Review“The book is intended for students and scientists and should be of interest to practicing and research engineers as well as Ph.D. students in the field of motion control of robots and robot teams.” (Clementina Mladenova, zbMATH 1503.93007, 2023)Table of Contents1. Introduction.- 2. Modelling.- 3. Coordination Problems.- 4. Preliminaries.- 5. Rendezvous of Flying Robots with Local and Distributed Feedbacks.- 6. Rendezvous of Kinematic Unicycles with Local and Distributed Feedbacks.- 7. Formations of Kinematic Unicycles.- 8. Formations of Kinematic Unicycles with Parallel and Circular Collective Motions.- 9. General Formation Path Following.- 10. Unicycle Formation Simulation Trials.- 11. Conclusions and Future Research.

Read more less

Book SynopsisThis book is an attempt to address this wide topic with a multi-disciplinary approach. Nowadays, robotics is developing at a much faster pace than ever in the past, both inside and outside industrial environments. While other publications focus on describing the theoretical basis of robot motion, this book pays special attention to explain the fundamentals through real applications. Thus, it represents a perfect combination for studying this topic along with other theoretical books. Each chapter has been authored by experts in specific areas spanning from the mechanics of machinery to control theory, informatics, mechatronics. Chapters have been divided into two sections. The first one is aiming to give a theoretical background. The second section is focused on applications. This book project can be foreseen as a reference for young professionals/researchers to overview the most significant aspects in robotics.Table of ContentsChapter 1: Historical backgrounds on robot mechanism design.- Chapter 2: Path planning for special robotic operations.- Chapter 3: Towards Human Activity Recognition Enhanced Robot Assisted Surgery.- Chapter 4: Metamorphic Manipulators.

Read more less

Book SynopsisThrough a series of highly speculative contributions by both leading and highly acclaimed practitioners and theorists, this book gives a new comprehensive overview of architectures’ most recent practical and theoretical developments. While a few chapters are mostly dedicated to a historical analysis of how we got to experience a new technological reality in architecture and beyond, all chapters including the most forward looking, have in common their rigorous understanding of history as a pool of radical experiments, whether one speaks of the history of architecture, or of sociology, technology, and science. Disruptive Technologies: The Convergence of New Paradigms in Architecture is required reading for anybody student, practitioner, and educator who wants to do serious research in architecture and all disciplines dealing with the shaping of our environment, beyond the important but restricted domain of computational architectural design.Additional multimedia content via app: download the SN More Media app for free, scan a link with play button and access to the Additional Contents directly on your smartphone or tablet.Table of Contents1: Disruptive Technologies in Architecture (General Introduction).- 2.1: Robotics and AI in Architecture.- 2.2: Bioptemes and Mechy Max Systems: Topological Imaginations of Adaptive Architecture.- 2.3: How Do We Want to Interact with Robotic Environments? User Preferences for Embodied Interactions, from Pushbuttons to AI.- 2.4: Design-to-Robotic-Production and -Operation for Activating Bio-Cyber-Physical Environments.- 2.5: Conceptual and Methodological Constructs for People-Oriented Public Spaces.- 3.1: Architectural Intelligence, Machine and Human Learning.- 3.2: Architectural Knowledge and Learning Algorithms.- 3.3: On Legibility: Machine Readable Architecture.- 3.4: Where is reality? Can you show it to me? Constructing Artificial Agency.- 3.6: From Disruptions in Architectural Pedagogy to Disruptive Pedagogies for Architecture.- 4.1: Cyber-Urban Integration, Disruptive Construction Technologies, and Tectonics.- 4.2: Cyber-Urban Integration.- 4.3: Democratising Tectonism: High performance geometry for mass-customisation of virtual and physical spaces.- 4.4: Why Disruptive Business Models are Inseparable from Disruptive Technologies?.

Read more less

Book Synopsis This book includes recent research on climbing and walking robots. CLAWAR 2022 is the twenty-fifth International Conference Series on Climbing and Walking Robots and Mobile Machine Support Technologies. The conference is organized by CLAWAR Association in collaboration with the University of the Azores, S. Miguel, Portugal, during September 12-14, 2022. CLAWAR 2022 provides an updated state of the art on robotics and its use in a diversity of applications and/or simulation scenarios, within the framework “Robotics in Natural Settings”. The topics covered include Bio-Inspired Robotics, Biped Locomotion, Educational Robotics, Human-Machine/Human-Robot Interaction, Innovative Actuators, Inspection, Legged Locomotion, Modeling and Simulation of CLAWAR, Outdoor and Field Robotics, Planning and Control, Wearable Devices and Assistive Robotics, and the Use of A.I. in Robotics. The intended readership includes participants of CLAWAR 2022 conference, international robotic researchers, scientists, and professors of related topics worldwide, and professors and students of postgraduate courses in Robotics and Automation, Control Engineering, Mechanical Engineering, and Mechatronics.

Read more less

Book SynopsisThis book addresses the topic of autonomous flying robots physically interacting with the environment under the influence of wind. It aims to make aerial robots aware of the disturbance, interaction, and faults acting on them. This requires reasoning about the external wrench (force and torque) acting on the robot and distinguishing between wind, interactions, and collisions. The book takes a model-based approach and covers a systematic approach to parameter identification for flying robots. The book aims to provide a wind speed estimate independent of the external wrench, including estimating the wind speed using motor power measurements. Aerodynamics modeling is approached in a data-driven fashion, using ground-truth measurements from a 4D wind tunnel. Finally, the book bridges the gap between trajectory tracking and interaction control, to allow physical interaction under wind influence. Theoretical results are accompanied by extensive simulation and experimental results.Table of Contents Introduction.- Modeling.- Tracking and interaction control.- Wind estimation.- Force discrimination.- Applications and outlook.- Conclusion.

Read more less

Book SynopsisThis book contains seventeen contributions in the form of independent chapters, covering a broad range of topics related to human–robot interaction at physical and cognitive levels. Each chapter represents a novel piece of work presented during HFR 2022 by researchers in the different areas of robotics, where new theories, methodologies, technologies, challenges, and empirical and experimental studies are discussed. Additionally, this compilation is rich in viewpoints due to the multidisciplinary nature of its authors. Hence, this book represents an excellent opportunity for academics, researchers, and industry partners to get acquainted with the most recent work on human–robot interaction.Table of ContentsA Literature-Based Perspective on Human-Centered Design and Evaluation of Interfaces for Virtual Reality in Robotics.- A Multi-Modal Feedback Communication Interface for Human Working Posture Adjustments.- An Optimal Human-Based Control Approach for Mobile Human-Robot Collaboration.- Approximating Robot Reachable Space Using Convex Polytopes.- Complexity and Similarity Metrics for Unsupervised Identification of Programming Methods for Robot Cooking Tasks.- Damping Design for Robot Manipulators.

Read more less

Book SynopsisThis book presents the astonishing potential of deep sensorimotor policies for agile vision-based quadrotor flight. Quadrotors are among the most agile and dynamic machines ever created. However, developing fully autonomous quadrotors that can approach or even outperform the agility of birds or human drone pilots with only onboard sensing and computing is challenging and still unsolved.Deep sensorimotor policies, generally trained in simulation, enable autonomous quadrotors to fly faster and more agile than what was possible before. While humans and birds still have the advantage over drones, the author shows the current research gaps and discusses possible future solutions.Table of Contents1: Introduction.- 2: Contribution.- 3: Future Directions.

Read more less

Book Synopsis

Read more less

Book SynopsisTable of Contents1 Einführung.- 1.1 Motivation.- 1.2 Literaturüberblick.- 1.3 Ziele und Gliederung der Arbeit.- 2 Grundlagen.- 2.1 Die Denavit-Hartenberg Notation.- 2.2 Duale (3×3)-Matrizen und Quaternionen.- 2.3 Der Paul’sche Ansatz zur Lösung des IKP.- 2.4 Erkennung global degenerierter Roboter.- 2.5 Vereinfachung der Gelenktabelle.- 2.6 Spiegelung von Robotergeometrien.- 2.7 Festlegung der Systemeingabe.- 3 Roboter mit einer ebenen Gelenkgruppe.- 3.1 Ebene Gelenkgruppen in Heiß’schen Klassen.- 3.2 Herleitung der Ansatzgleichungen.- 3.3 Berechnung der Lösung im allgemeinen Fall.- 3.4 Sonderfälle quadratischer Lösbarkeit.- 3.5 Lösung der verbleibenden Gelenkvariablen.- 3.6 Ergebnisse.- 4 Konzepte.- 4.1 Systemschale und Systemkern.- 4.2 Funktionsweise des Systemkerns.- 4.3 Konzepte anderer Invertierungssysteme.- 5 Prototypgleichungen.- 5.1 Neu entwickelte Prototypgleichungen.- 5.2 Prototypen für ein Invertierungssystem.- 6 Implementierung.- 6.1 Auswahl von Prolog.- 6.2 Interne Repräsentation von Gleichungen.- 6.3 Gleichungsmerkmale.- 6.4 Suche nach lösbaren Gleichungen.- 6.5 Extraktion der Gleichungsparameter.- 6.6 Ein- und Ausgaben des Programms SKIP.- 7 Leistungsbetrachtung.- 7.1 Implementierungsstand der Testversion.- 7.2 Geometrien aus Heiß’schen Klassen.- 7.3 Orthogonale Geometrien aus Klasse 3 und 9.- 7.4 Drei sich schneidende Rotationsachsen.- 7.5 Spezialfälle aus den Klassen 2 und 5.- 7.6 Geometrien mit einer ebenen Gelenkgruppe.- 7.7 Exemplarische Betrachtung der Lösungsgüte.- 7.8 Zusammenfassende Bewertung.- 8 Anwendungen.- 8.1 Invertierung redundanter Roboter.- 8.2 Integration in ein Robotersimulationssystem.- 9 Zusammenfassung und Ausblick.- A Ergänzung der Grundlagen.- A.1 Invertierung einer SCARA-Geometrie.- A.2 Determinante und globale Degeneration.- A.3 Spiegelung einer Robotergeometrie.- B Gleichungsmaterial Kapitel 3.- B.1 Fall 1.- B.2 Fall 2.1.- B.3 Fall 2.2.- C Prototypgleichungen.- C.1 Aus der Literatur bekannte Prototypen.- C.2 Ableitung der Prototypen 15, 16 und 17.- D Protokolle.- D.1 Gleichungssatz für die Stanford-Geometrie.- D.2 6-achsige SCARA-Geometrie.- D.3 8-achsige redundante Geometrie.- E Protokolle zur Leistungsbewertung.- E.1 Geometrien aus Heiß’schen Klassen.- E.2 Lösungen über Prototyp 18.- E.3 Geometrien mit einer ebenen Gelenkgruppe.

Read more less

Book Synopsis1 Technische Grundlagen.- 1.1 Netzwerktopologien (Klatt).- 1.2 Kommunikationsmodelle (Pech).- 1.3 Buszugriffsverfahren (Klatt).- 1.4 Datensicherung (Schnell).- 1.5 Telegrammformate (Pech).- 1.6 Binäre Informationsdarstellung (Klatt).- 1.7 Übertragungsstandards (Klatt).- 1.8 Leitungen und Übertragungsarten (Schnell).- 1.9 Verbindung von Netzen (Pech).- 2 Netzwerkhierarchien bei CIM (Heimbold, Kriesel).- 2.1 Übersicht und Spezifik der Kommunikation in der Automatisierung.- 2.2 Managementebene.- 2.3 Prozeßleitebene.- 2.4 Feldebene (Feldgerät SPS).- 2.5 Sensor-Aktor-Ebene.- 3 Internationale Feldbusnormung (Kessler).- 3.1 Die verschiedenen Normierungsaktivitäten.- 3.2 Der IEC-Feldbus.- 3.3 Interoperable Systems Project (ISP) und World FIP.- 4 Beispiele ausgeführter Bussysteme.- 4.1 Sensor/Aktor-Busse.- 4.2 Feldbusse.- 5 Weitverkehrsnetze (Pech).- 5.1 ISDN.- 5.2 DATEX-L.- 5.3 DATEX-P.- 5.4 TEMEX.- 6 Anhang Datenblätter.- 6.1 ASI (Aktuator/Sensor-Interface).- 6.2 VariNet-2.- 6.3 Bitbus.- 6.4 PROFIBUS.- 6.5 InterBus-S.- 6.6 SUCONET-K.- 6.7 Modnet.- 6.8 SINEC.- 6.9 LON.- 6.10 Factory Information Protocol (FTP).- 6.11 P-Net.- 6.12 CAN (Controller Area Network).- 6.13 Eigensichere Feldbusse (Schimmele).Table of Contents1 Technische Grundlagen.- 1.1 Netzwerktopologien (Klatt).- 1.1.1 Zweipunktverbindungen.- 1.1.2 Zweipunktverbindung mit Multiplexer.- 1.1.3 Bus-Struktur.- 1.1.4 Baumstruktur.- 1.1.5 Ringstruktur.- 1.1.6 Sternstruktur.- 1.2 Kommunikationsmodelle (Pech).- 1.2.1 Das ISO/OSI-Referenzmodell.- 1.2.1.1 Allgemeines.- 1.2.1.2 Die physikalische Schicht oder Bitübertragungsschicht.- 1.2.1.3 Die Sicherungsschicht.- 1.2.1.4 Die Netzwerkschicht.- 1.2.1.5 Die Transportschicht.- 1.2.1.6 Die Sitzungsschicht.- 1.2.1.7 Die Darstellungsschicht.- 1.2.1.8 Die Anwendungsschicht.- 1.2.1.9 Dienste für die Kommunikation zwischen den Schichten.- 1.2.1.10 Beispiel: Ablauf einer Kommunikation im OSI-Modell.- 1.2.2 Das TCP/IP-Protokoll.- 1.3 Buszugriffsverfahren (Klatt).- 1.3.1 Master/Slave-Verfahren.- 1.3.2 Token-Prinzip.- 1.3.3 Token-Passing.- 1.3.4 CSMA.- 1.3.5 CSMA/CA.- 1.4 Datensicherung (Schnell).- 1.4.1 Einleitung.- 1.4.2 Fehlerarten.- 1.4.3 Einige grundlegende Beziehungen.- 1.4.3.1 Bitfehlerrate.- 1.4.3.2 Wiederholung einer Eintragung.- 1.4.3.3 Restfehlerrate.- 1.4.3.4 Hamming-Distanz.- 1.4.3.5 Telegrammübertragungseffizienz.- 1.4.4 Einige Strategien der Fehlererkennung.- 1.4.4.1 Paritätsbit.- 1.4.4.2 Blocksicherung.- 1.4.4.3 CRC.- 1.4.5 Datenintegritätsklassen.- 1.4.6 Telegrammformate.- 1.4.6.1 Telegramm mit Paritätsbit.- 1.4.6.2 Telegramm mit CRC.- 1.5 Telegrammformate (Pech).- 1.5.1 Das HDLC-Protokoll.- 1.5.2 UART.- 1.5.3 Profibus-Norm DIN 19245.- 1.6 Binäre Informationsdarstellung (Klatt).- 1.6.1 NRZ, RZ.- 1.6.2 Bipolar-Kodierung, HDBn-Kodierung.- 1.6.3 NRZI.- 1.6.4 AFP.- 1.6.5 Manchester II-Kodierung.- 1.6.6 FSK, ASK, PSK.- 1.7 Übertragungsstandards (Klatt).- 1.7.1 RS 232-, V.24-Schnittstelle.- 1.7.2 RS 422-Schnittstelle.- 1.7.3 RS 485-Schnittstelle.- 1.7.4 20 mA-Stromschleife.- 1.8 Leitungen und Übertragungsarten (Schnell).- 1.8.1 Übersicht über die Leitungsarten.- 1.8.2 Paralleldrahtleitung.- 1.8.3 Koaxialleitung.- 1.8.4 Lichtwellenleiter (LWL).- 1.8.5 Übertragungsarten.- 1.8.5.1 Basisbandübertragung.- 1.8.5.2 Trägerfrequenzübertragung.- 1.8.5.3 Breitbandübertragung.- 1.9 Verbindung von Netzen (Pech).- 1.9.1 Repeater.- 1.9.2 Bridges.- 1.9.3 Router.- 1.9.4 Gateways.- 2 Netzwerkhierarchien bei CIM (Heimbold, Kriesel).- 2.1 Übersicht und Spezifik der Kommunikation in der Automatisierung.- 2.2 Managementebene.- 2.3 Prozeßleitebene.- 2.4 Feldebene (Feldgerät — SPS).- 2.4.1 Anforderungen an ein Feldbussystem.- 2.4.2 Schlußfolgerungen.- 2.4.3 Stand und Entwicklungstendenzen.- 2.4.4 Datenübertragung mit Lichtwellenleitern.- 2.4.5 Feldbussystem in Doppelringstruktur.- 2.5 Sensor-Aktor-Ebene.- 2.5.1 Anforderungen.- 2.5.2 Varianten.- 2.5.2.1 Ungetaktete Parallel-Seriell-Umsetzung.- 2.5.2.2 Binärwerterfassung durch Auswertung von Impulsreflexionen.- 2.5.2.3 Lösungsmöglichkeit mit Digitaltechnik.- 3 Internationale Feldbusnormung (Kessler).- 3.1 Die verschiedenen Normierungsaktivitäten.- 3.2 Der IEC-Feldbus.- 3.2.1 Physical Layer.- 3.2.2 Data Link Layer.- 3.2.3 Application Layer.- 3.3 Interoperable Systems Project (ISP) und World FIP.- 4 Beispiele ausgeführter Bussysteme.- 4.1 Sensor/Aktor-Busse.- 4.1.1 ASI (Schiff).- 4.1.2 VariNet-2 (Kessler).- 4.2 Feldbusse.- 4.2.1 Der Bitbus (Schnell).- 4.2.2 PROFIBUS (Schmitz).- 4.2.3 InterBus-S (Bent).- 4.2.4 SUCONET-K (Roersch).- 4.2.5 Modnet von AEG (Nierhaus).- 4.2.5.1 Modnet1/SFB.- 4.2.5.2 Modnet1/M+.- 4.2.5.3 Modnet1/P.- 4.2.5.4 Modnet3/MMSE.- 4.2.6 SINEC — Industrielle Kommunikation von Siemens (Sommer).- 4.2.6.1 SINEC H3 — der Höchstleistungs-Backbone.- 4.2.6.2 SINEC H1 — das Lokale Netz für Produktion und Büro.- 4.2.6.3 SINECL2.- 4.2.7 LON (Bruland).- 4.2.8 FIP (Kessler).- 4.2.9 P-NET (Böttcher).- 4.2.10 CAN (Böttcher).- 5 Weitverkehrsnetze (Pech).- 5.1 ISDN.- 5.2 DATEX-L.- 5.3 DATEX-P.- 5.4 TEMEX.- 6 Anhang Datenblätter.- 6.1 ASI (Aktuator/Sensor-Interface).- 6.2 VariNet-2.- 6.3 Bitbus.- 6.4 PROFIBUS.- 6.4.1 PROFIBUS.- 6.4.2 PROFIBUS (DP).- 6.5 InterBus-S.- 6.6 SUCONET-K.- 6.7 Modnet.- 6.7.1 Modnet1/SFB (Bitbus).- 6.7.2 Modnet1/M+.- 6.7.3 Modnet1/P (PROFIBUS).- 6.7.4 Modnet3/MMSE.- 6.8 SINEC.- 6.8.1 SINEC L2 (PROFIBUS).- 6.8.2 SINEC H1.- 6.8.3 SINEC H3.- 6.9 LON.- 6.10 Factory Information Protocol (FTP).- 6.11 P-Net.- 6.12 CAN (Controller Area Network).- 6.13 Eigensichere Feldbusse (Schimmele).- 6.13.1 ICSMUX(PDV).- 6.13.2 ICS MUX (RS 485).- 6.13.3 ICS MUX (ISP).

Read more less

Book SynopsisDas Lösungsbuch enthält die Lösungen aller Übungsaufgaben des Lehrbuches.Table of ContentsDas Lösungsbuch enthält die Lösungen aller Übungsaufgaben des Lehrbuches.

Read more less

Book SynopsisDas Lehrbuch behandelt die Themen aus der Steuerungs- und Regelungstechnik, wie sie für den Einsatz von speicherprogrammierbaren Steuerungen notwendig sind. Im ersten Teil des Buches werden die Grundlagen der Steuerungstechnik, der Aufbau und die Funktionsweise einer SPS erläutert. Im zweiten Teil werden die Verknüpfungs- und Ablaufsteuerungen behandelt. Der dritte Teil führt in die Verarbeitung von digitalen Signalen ein, um die Grundoperationen für digitale Steuerungen, die Wortverarbeitung, die Beschreibungsmittel und Entwurfsmethoden von digitalen Steuerungsprogrammen vorzustellen. Der abschließende vierte Teil thematisiert die Grundbegriffe der Regelungstechnik. Es wird gezeigt, wie die regelungstechnischen Grundelemente in eine SPS umgesetzt werden. In das Buch wurde eine vollständige Operationsliste der Steuersprache STEP-5 und ein kommentiertes Programmverzeichnis mit Angabe der verwendeten Lösungsverfahren für alle Beispiele und Aufgaben aufgenommen. Gleichzeitig wurde der Inhalt um eine Einführung in den Programmierstandard IEC 1131-3 ergänzt.Table of ContentsGrundlagen - Binäre Steuerungen: Verknüpfungssteuerungen - Ablaufsteuerungen - Spezialgebiete der Steuerungstechnik. Digitale Steuerungen: Wortverarbeitung - Beschreibungsmittel und Entwurfsmethoden. Analogwertverarbeitung und Regelungsprozesse. Programmiersprachen IEC 1131-3

Read more less

Book SynopsisElektromagnete werden heute im wachsenden Umfang als Antriebselemente mechatronischer Systeme im Maschinenbau, im Fahrzeugbau sowie in der Automatisierungs- und Präzisionstechnik eingesetzt. Als Magnetaktoren bestimmen sie in mechatronischen Systemen entscheidend die funktionellen Eigenschaften moderner technischer Produkte mit. Dieses Fachbuch vermittelt die physikalischen Grundlagen, den Entwurf und ausgewählte Einsatzgebiete von Gleichstrom-, Wechselstrom- und polarisierten Elektromagneten. Table of ContentsGrundgesetze des magnetischen Feldes.- Magnetkraft und Energie.- Berechnung des magnetischen Feldes von Elektromagneten.- Das dynamische Verhalten von Elektromagneten.- Erwärmung von Antrieben.- Elektromagnetische Schrittmotoren.- Entwurf elektromagnetischer Antriebe.- Spezielle Magnetkonstruktionen.- Magnetische Mikroaktoren.- Magnetische Messtechnik.

Read more less

Book SynopsisCui bono? – Wem nutzt die Entwicklung humanoider Maschinen oder Automaten? Dieses Buch erörtert die Details dieses Spannungsfelds und die Herausforderung gesellschaftlicher Weiterentwicklung. Als technisch-elektronische Handhabungsgeräte können sie den Menschen zuträglich sein, sie von körperlich belastenden Arbeiten oder sogenannten Routinearbeiten befreien. Der Autor versucht die Fragen zu beleuchten: Was erwartet die Menschheit durch die Entwicklung einer künstlichen Intelligenz in einer menschähnlichen Maschine? Was aber, wenn der selbstbestimmende Mensch an der Schwelle steht, sich selbst durch intelligente selbstorganisierte Produkte und Prozesse eine humanoide Konkurrenz zu schaffen, die er möglicherweise nicht mehr kontrollieren kann?Table of ContentsDie Optimierung und die Gesellschaft.- Macht des kurzfristigen Genusses - Ohnmacht der nachhaltigen Veränderung.- Arbeiten und Arbeiten lassen - Arbeitskampf um die "Semantische Lücke".- Freizeitaktivität und/oder konditionierte Ertüchtigung.- Muße und Entschleunigung.

Read more less

Book SynopsisTim Schleicher erarbeitet Empfehlungen zur Gestaltung von Mensch-Roboter-Schnittstellen, die die gebrauchstaugliche Anweisung von kollaborierenden Robotern in variantenreichen Produktionssystemen erlauben. Roboterfähigkeiten können durch eine entsprechende Positionierung an frei wählbaren Positionen an Bauteilen und durch eine entsprechende Parametrierung in verschiedenen Ausprägungen genutzt werden. Die Programmierung erfolgt somit durch die Anweisung des Roboters durch die Übergabe des Arbeitsortes und der Arbeitsparameter, z.B. die Übergabe einer Polieraufgabe an stets anderen Bauteilpositionen und in unterschiedlichen Intensitäten.Table of ContentsMensch-Roboter-Schnittstellen (MRS) zur Anweisung kollaborierender Roboter.- Grundlegende und anwendungsspezifische Anforderungen an die Gestaltung von gebrauchstauglichen MRS.- Iterative Gestaltung und Evaluation von MRS in einer instruktiven Mensch-Roboter-Kollaboration (iMRK).

Read more less

Book SynopsisDas Buch beschreibt die Meilensteine der Automatisierung vom Beginn der Ethernet- und der Feldbus-Systementwicklungen sowie die Entstehung des OSI Modells und der Automatisierungspyramide. Es bietet einen Fokus auf die Entwicklung von Feldgeräten und Automatisierungskomponenten im Rahmen der Einflussnahme von Elektronik-, µ-Controller- DSP-, FPGA-, Multi-Core-Prozessoren- und Chip-on-Bond-Entwicklungen sowie Software und Algorithmen.Table of ContentsIndustrie 4.0.- Made in China 2025.- IoT.- KI.- Neuronale Netzwerke.- Mustererkennung.- Predictive Maintenance, Digitalisierung und Industrie 4.0 Sachstand.- Automatisierung und Qualitätssicherung.- Komplexitätspyramide der Automatisierung.- OSI-Modell, Automatisierungspyramide und Lösungsgeschäft in der Automatisierung.- Gremienbildung in der Automatisierung, ihre Zielsetzungen und Bestrebungen zur Standardisierung.- Die 12 wichtigsten Feldbusse.- ASIC’s.- Bedienoberflächen und Kommunikationsprotokolle.- FDT/DTM.- SAP.- OPC UA.- Cloud Computing.- Historie von mittelständischen Unternehmen und Industrie 4.0.- Automatisierung der Automobilbranche im Zeitraffer.- Robotik seit 1970.- Zeittafel der Automatisierung seit 1970 und deren Zusammenfassung.

Read more less

Book SynopsisIndustrieroboter sind universelle Handhabungsgeräte mit mehreren Freiheitsgraden, die freiprogrammierbar und damit leicht umrüstbar sind. Ihre Entwicklung wurde vornehmlich durch zwei Tendenzen begleitet und geprägt: Da ist einmal die Notwendigkeit, in der Fertigung eine immer größere Anzahl kleiner werdender Losgrößen auch in der Handhabungstechnik zu automatisieren. Da ist zum anderen der ungeheuere Fortschritt in der elektronischen Steuerungstechnik, der zu erhöhter Flexibilität und besserer technischer Ausstattung der Industrieroboter führte. Eine Fülle von Veröffentlichungen befaßt sich mit allen Einzelheiten über Industrieroboter. Das "Handbuch Industrieroboter" versucht dem an der Praxis orientierten Anwender diese neue Technologie aus neutraler Sicht in einem möglichst umfassenden Stand zu umreißen. Das kann, unter Voraussetzung eines vernünftigen Umfanges für dieses Buch, nur durch viele Abbildungen, knappem Text, Tabellen und Übersichten sowie durch Beschränkung auf die Anwendungsorientiertheit geschehen. Aus diesem Grunde wurden bewußt beim Datenteil nur Industrieroboter aufgenommen, die vornehmlich in Deutschland vertrieben werden. Nach Erörterung von Gründen für die Automatisierung mit Industrierobotern, befaßt sich das Buch mit Vor- und Nachteilen der unterschiedlichen Bauteile und Bauweisen dieser Geräte. Daran anschließend folgen Anwendungsfälle aus der Praxis. Nach Programmierung und Einsatzplanung von diesen freiprogrammierbaren Handhabungsautomaten, wird schließ­ lich an zwei konkreten Fallstudien ein Wirtschaftlichkeitsvergleich auf der elektronischen Datenverarbeitung durchgeführt. Zukünftigen Entwicklungen wird nur ein kurzer Ausblick gewährt. Dafür schließen umfang­ reiche Tabellen und Abbildungen von maßstäblichen Arbeitsräumen aller gebräuchlichen Geräte das Buch ab.Table of Contents1 Definitionen.- 2 Gründe für den Einsatz von Industrierobotern.- 3 Aufbau von Industrierobotern.- 4 Anwendung freiprogrammierbarer Manipulatoren.- 5 Programmierung von Industrierobotern.- 6 Erfahrungen bei der Einführung und dem Einsatz von Industrierobotern.- 7 Wirtschaftlichkeitsvergleich mittels EDVA.- 8 Ausblick.- 9 Anhang.- Firmenunterlagen.- Sachwortverzeichnis.

Read more less

Book SynopsisPraxis der Montagetechnik ist das Nachfolgebuch des in der ersten Auflage erschienenen Buches "Angewandte Montagetechnik" vom gleichen Autorenteam. Es werden die Arbeitstechniken zur systematischen Planung von flexiblen Montagesystemen gezeigt. Konkrete Lösungsmöglichkeiten und Hilfsmittel für die Entwicklung und Gestaltung von manuellen und teilautomatisierten Montagesystemen werden dargestellt. Der Katalogteil enthält Systemelemente in Form von Datenblättern mit der Möglichkeit zur überschlägigen Kostenermittlung. In der 2. Auflage wurde ein Kapitel über flexible automatisierte Montagesysteme aufgenommen. Die neue Rechtschreibung und die Umstellung auf € wurden vorgenommen. Das Herstellerverzeichnis wurde aktualisiert und um Angaben von Internetadressen ergänzt.Table of ContentsVoraussetzungen - Planungssystematik - Planungshilfsmittel - Grundformen von Montagesystemen - Arbeitsplatzgestaltung - Transferkomponenten - Speicher - Produktionszellen - Herstellerverzeichnis

Read more less

Book SynopsisDas Lehrbuch vermittelt die Grundlagen des Lehr- und Studienfachs Automatisierungstechnik hinsichtlich der Programmierung von SPS-Systemen und der Kommunikation dieser Geräte über industrielle Bussysteme. Der Lehrstoff wird systematisch entwickelt und in Praxisbeispielen angewendet. Dabei werden auch parametrierbare Programmierbausteine aus den unter www.automatisieren-mit-sps.de zur Verfügung gestellten Bausteinbibliotheken eingesetzt. Das Lehrbuch beruht auf den Erfahrungen einer umfangreichen Unterrichtserfahrung der Autoren.Table of ContentsEinführung in die SPS-Programmiernorm DIN EN 61131-3.- Operationsvorrat der Programmiersysteme STEP 7 und CoDeSys.- Anwendung der SPS-Programmiersprachen.- Beschreibungsmittel für den Entwurf von SPS-Programmen.- Ablaufsteuerungen und Zustandsgraph Analogwertverarbeitung.- Bussysteme und Funknetze in der Automatisierungstechnik.- Technologische Funktionen für Regelungen, Antriebe und Instandhaltung von Anlagen.- Informationstechnologien zur Integration von Betriebsführungs- und Fertigungsabläufen.- Sicherheit von Steuerungen.

Read more less

Book SynopsisAutonomous weapons systems, often referred to as 'killer robots', have been a hallmark of popular imagination for decades. However, with the inexorable advance of artificial intelligence systems (AI) and robotics, killer robots are quickly becoming a reality. These lethal technologies can learn, adapt, and potentially make life and death decisions on the battlefield with little-to-no human involvement. This naturally leads to not only legal but ethical concerns as to whether we can meaningful control such machines, and if so, then how. Such concerns are made even more poignant by the ever-present fear that something may go wrong, and the machine may carry out some action(s) violating the ethics or laws of war. Researchers, policymakers, and designers are caught in the quagmire of how to approach these highly controversial systems and to figure out what exactly it means to have meaningful human control over them, if at all. In Designed for Death, Dr Steven Umbrello aims to not only produce a realistic but also an optimistic guide for how, with human values in mind, we can begin to design killer robots. Drawing on the value sensitive design (VSD) approach to technology innovation, Umbrello argues that context is king and that a middle path for designing killer robots is possible if we consider both ethics and design as fundamentally linked. Umbrello moves beyond the binary debates of whether or not to prohibit killer robots and instead offers a more nuanced perspective of which types of killer robots may be both legally and ethically acceptable, when they would be acceptable, and how to design for them.

Read more less

Book SynopsisThe scientific and technological innovations that will take place over the next decade will transform our society in profound ways. Sex robots, or robots made for sex, are already becoming a reality as a substitute for human beings in bed: although current prototypes are relatively simple and crude, future technological capabilities will render sex robots capable of interacting with humans in more human-like ways. They will be able to recognize their partner, understand their state of mind, and learn their tastes and preferences.Professor Maurizio Balistreri introduces us to the fascinating world of sex of the future by addressing all the ethical issues that the large-scale commercialization of sex robots will raise without taboos and judgements. What will become of love if all our sexual relationships are conducted with machines? What will happen to the world of paid sex and pornography? Will sex robots increase or decrease sexual violence? In addition to confronting the international debate on the moral acceptability of sex robots, this book examines the most recent studies on violent video games and pornography, questioning the widespread belief that playing violent games or witnessing violent representations corrupts people and makes them violent. Not only could sex robots be an essential tool for expressing and exploring our most forbidden sexual fantasies, but they could also be used to treat sex offenders and paedophiles. Sex Robots is a book that questions our prejudices towards sex robots with clarity and simplicity, helping us reason and reflect on a future that is already present, in the awareness that robots will change the world and our lives.

Read more less

Book Synopsis

Read more less

Book SynopsisThis book focuses on end-to-end robotic applications using vision and control algorithms, exposing its readers to design innovative solutions towards sensors-guided robotic bin-picking and assembly in an unstructured environment. The use of sensor fusion is demonstrated through a bin-picking task of texture-less cylindrical objects. The system identification techniques are also discussed for obtaining precise kinematic and dynamic parameters of an industrial robot which facilitates the control schemes to perform pick-and-place tasks autonomously without any interference from the user. The uniqueness of this book lies in a judicious balance between theory and technology within the context of industrial application. Therefore, it will be valuable to researchers working in the area of vision- and force control- based robotics, as well as beginners in this inter-disciplinary area, as it deals with the basics and technologically advanced research strategies.Table of ContentsIntroduction.- Vision System and Calibration.- Uncertainty and Sensitivity Analysis.- Identification.- Force Control and Assembly.- Integrated Assembly and Performance Evaluation.- Conclusion.- Vision and Uncertainty Analysis.- Robot Jacobian.- Code Snippets and Experimental Videos.

Read more less

Book SynopsisThis book is as an extension of previous book “Computer Vision and Machine Learning in Agriculture” for academicians, researchers, and professionals interested in solving the problems of agricultural plants and products for boosting production by rendering the advanced machine learning including deep learning tools and techniques to computer vision algorithms. The book contains 15 chapters. The first three chapters are devoted to crops harvesting, weed, and multi-class crops detection with the help of robots and UAVs through machine learning and deep learning algorithms for smart agriculture. Next, two chapters describe agricultural data retrievals and data collections. Chapters 6, 7, 8 and 9 focuses on yield estimation, crop maturity detection, agri-food product quality assessment, and medicinal plant recognition, respectively. The remaining six chapters concentrates on optimized disease recognition through computer vision-based machine and deep learning strategies.Table of ContentsHarvesting robots for smart agriculture.- Drone-based weed detection architectures using deep learning algorithms and real-time analytics.- A deep learning-based detection system of multi-class crops and orchards using a UAV.- Real-life agricultural data retrieval for large scale annotation flow optimization.- Design and analysis of IoT-based modern agriculture monitoring system for real time data collection.- Estimation of wheat yield based on precipitation and evapotranspiration using soft computing methods.- Coconut maturity recognition using convolutional neural network.- Agri food products quality assessment methods.- Medicinal plant recognition from leaf images using deep learning.- ESMO based plant leaf disease identification: A machine learning approach.- Deep learning-based cuali flower disease classification.- An Intelligent System for Crop Disease Identification and Dispersion Forecasting in SriLanka.- Apple leaves diseases detection using deep convolutional neural networks and transfer learning.- A deep learning paradigm for detection and segmentation of plant leaves diseases.- Early-stage prediction of plant leaf diseases using deep learning models.

Read more less

Book SynopsisThis open access book introduces key concepts in robotics in an easy to understand language using an engaging project-based approach. It covers contemporary topics in robotics, providing an accessible entry point to fundamentals in all the major domains. A section is dedicated to introducing programming concepts using Python, which has become a language of choice in robotics and AI. The book also introduces the reader to the Robot Operating System (ROS), the ubiquitous software and algorithmic framework used by researchers and the industry. The book provides an inspired, up-to-date and multidisciplinary introduction to robotics in its many forms, including emerging topics related to robotics on Machine Learning, ethics, Human-Robot Interaction, and Design Thinking. The book also includes interviews with industry experts, providing an additional layer of insight into the world of robotics. The book is made open access through the generous support from Kinova Robotics. The book is suitable as an undergraduate textbook in a relevant engineering course. It is also suitable for students in art and design, high school students, and self-learners who would like to explore foundational concepts in robotics. “This book provides the ‘foundation’ for understanding how robots work. It is the accessible introduction that artists and engineers have been waiting for.” - Ken Goldberg, William S. Floyd Jr. Distinguished Chair in Engineering, UC Berkeley.Table of ContentsPART I: Contextual Design Genealogy of artificial beings: from ancient automata to modern robotics Nicolas Reeves and David St-Onge 1.1 What is a robot? 1.2 A mythical origin 1.3 Early automata 1.4 Anatomical analogies: understanding through replication 1.5 Industrial (r)evolutions 1.6 Modern robotics 1.7 SOCIAL ROBOTICS 1.8 Robotic futures and transrobotics Teaching and learning robotics: A pedagogical perspective Eleni Petraki and Damith Herath 2.1 Learning objective 2.2 Introduction 2.3 Defining the body of knowledge of the robotics field 2.4 Review of research on pedagogies and practices in robotics education 2.5 Assessment practices 2.6 Paving the way for innovative pedagogies and assessment in robotics education 2.7 Chapter summary 2.8 Quiz 2.9 References Design Thinking: from Empathy to Ideation Fanke Peng 3.1 Learning objectives 3.2 Introduction 3.3 Design Thinking Process: Discover, Define, Develop and Deliver 3.4 Conclusion 3.5 Quiz 3.6 References Software building blocks: From Python to Version control Damith Herath, Adam Haskard and Niranjan Shukla 4.1 Learning Objectives 4.2 Introduction 4.3 Python and basics of programming 4.4 Object-Oriented Programming 4.5 Error handling 4.6 Secure Coding 4.7 Case study – Writing your first program in Python 4.8 Version control basics 4.9 Containerising applications 4.10 Chapter summary 4.11 Revision questions 4.12 Further reading 4.13 References The Robot Operating System (ROS1&2): programming paradigms and deployment David St-Onge and Damith Herath 5.1 Learning Objectives 5.2 Introduction 5.3 Why ROS? 5.4 What is ROS? 5.5 Key features from the core 5.6 Additional useful features 5.7 Linux for robotics 5.8 Chapter Summary 5.9 Revision Questions 5.10 Further reading 5.11 References Mathematical building blocks: From geometry to quaternions to Bayesian Rebecca Stower, Bruno Belzile and David St-Onge 6.1 Learning Objectives 6.2 Introduction 6.3 Basic Geometry and Linear Algebra 6.4 Geometric Transformations 6.5 Basic Probability 6.6 Derivatives 6.7 Basic Statistics 6.8 Chapter Summary 6.9 Revision Questions 6.10 Further Reading 6.11 References PART II: Embedded Design What makes robots? Sensors, Actuators and Algorithms Jiefei Wang and Damith Herath 7.1 Learning Objectives 7.2 Introduction 7.3 Sense: Sensing the world with sensors 7.4 Think: Algorithms 7.5 Act: Moving about with actuators 7.6 Computer vision in robotics 7.7 Review questions 7.8 Further reading 7.9 References Mobile robots: Controlling, Navigating and path planning Jiefei Wang and Damith Herath 8.1 Learning Objectives 8.2 Introduction 8.3 Mobile robots 8.4 Controlling robots 8.5 Path planning 8.6 Obstacle avoidance 8.7 Chapter Summary 8.8 Review Questions 8.9 Further Reading 8.10 References Lost in space! Localisation and Mapping Damith Herath 9.1 Learning Objectives 9.2 Introduction 9.3 Robot localisation problem 9.4 The Robot Mapping Problem 9.5 The Simultaneous Localisation and Mapping (SLAM) problem 9.6 The Kalman Filter 9.7 A Case Study: Robot Localisation using the Extended Kalman Filter 9.8 Summary 9.9 Review Questions 9.10 Further Reading 9.11 References How to manipulate? Kinematics, dynamics and architecture of robot arms Bruno Belzile and David St-Onge 10.1 Learning Objectives 10.2 Introduction 10.3 Architectures 10.4 Kinematics of Serial Manipulators 10.5 Kinematics of Parallel Manipulators 10.6 Dynamics 10.7 Chapter Summary 10.8 Revision Questions 10.9 Further Reading 10.10 References Get together! Multi-robot systems: bio-inspired concepts and deployment challenges Vivek Shankar Varadharajan and Giovanni Beltrame 11.1 Objectives of the chapter 11.2 Introduction 11.3 Types of multi-robot systems 11.4 Swarm Programming 11.5 Deployment of real world swarm systems 11.6 Chapter Summary 11.7 Chapter Revision 11.8 Further reading 11.9 References The Embedded design process: CAD/CAM and prototyping Eddi Pianca 12.1 Learning Objectives 12.2 Introduction 12.3 The design process and CAD 12.4 The Design Process vs Design Thinking 12.5 CAD systems 12.6 CAD file types 12.7 CAD parametric modelling - Assembly and part files 12.8 CAD parametric modelling - Drawing Files 12.9 CAD File Transfer 12.10 VR and AR for CAD 12.11 CAM and CNC 12.12 Workshop 12.13 Case study - hexapod robot project 12.14 Revision questions 12.15 References PART II: Interaction Design Social robots: Principles of interaction design and user studies Janie Busby Grant & Damith Herath 13.1 Learning Objectives 13.2 Introduction 13.3 Cobots, Social Robots and Human Robot Interaction 13.4 Why conduct research? 13.5 Deciding on your research variables 13.6 Sampling, reliability & validity 13.7 Ethics 13.8 Chapter Summary 13.9 Revision Questions 13.10 References Safety first: On the safe deployment of robotic systems Bruno Belzile and David St-Onge 14.1 Learning Objectives 14.2 Introduction 14.3 Standards 14.4 Industrial Risk Assessment and Mitigation 14.5 Cobots 14.6 Mobile Robots 14.7 Chapter Summary 14.8 Revision Questions 14.9 Further Reading 14.10 References Managing the world complexity: from linear regression to deep learning Yann Bouteiller 15.1 Objectives of the chapter 15.2 Introduction 15.3 Definitions 15.4 From linear regression to deep learning 15.5 Policy search for robotic control 15.6 Wrapping it up: how to deeply understand the world 15.7 Summary 15.8 Quiz 15.9 Further reading Robot ethics: Ethical design considerations Dylan Cawthorne 16.1 Learning Objectives 16.2 Introduction 16.3 Ethics 16.4 The non-neutrality of technology 16.5 Technological determinism and multiple futures 16.6 Human values in design 16.7 Value sensitive design 16.8 Ethics tools 16.9 Case study: VSD of a Danish healthcare drone 16.10 Responsible research and innovation 16.11 Chapter summary 16.12 Revision questions 16.13 References APPENDIX: Projects Robot Hexapod Build Labs David Hinwood and Damith Herath 17.1 Introduction 17.2 Project One: Defining the Robot System 17.3 Project Two: Modelling the Position Kinematics 17.4 Project Three: Modelling the Velocity Kinematics with Python 17.5 Project Four: Building Communication Protocols 17.6 Some Final Thoughts 17.7 References ROS Mobile Manipulator labs David St-Onge, Corentin Boucher and Bruno Belzile 18.1 Introduction 18.2 Project 1: Discovering ROS and the Dingo 18.3 Project 2: Kalman for differential drive 18.4 Project 3: 3-DoF Kinematics 18.5 Project 4: Let's bring it back together! 18.6 Project 5: Save the day!

Read more less

Book SynopsisThe goal of this textbook is to equip readers with as structured knowledge of soft robotics as possible. Seeking to overcome the limitations of conventional robots by making them more flexible, gentle and adaptable, soft robotics has become one of the most active fields over the last decade. Soft robotics is also highly interdisciplinary, bringing together robotics, computer science, material science, biology, etc. After the introduction, the content is divided into three parts: Design of Soft Robots; Soft Materials; and Autonomous Soft Robots. Part I addresses soft mechanisms, biological mechanisms, and soft manipulation & locomotion. In Part II, the basics of polymer, biological materials, flexible & stretchable sensors, and soft actuators are discussed from a materials science standpoint. In turn, Part III focuses on modeling & control of continuum bodies, material intelligence, and information processing using soft body dynamics. In addition, the latest research results and cutting-edge research are highlighted throughout the book. Written by a team of researchers from highly diverse fields, the work offers a valuable textbook or technical guide for all students, engineers and researchers who are interested in soft robotics.Table of ContentsChapter 1: Introduction.- Chapter 2: Soft Mechanisms.- Chapter 3: Biological Mechanisms.- Chapter 4: Soft Manipulation and Locomotion.- Chapter 5: Basics of Polymer.- Chapter 6: Biological Material.- Chapter 7: Flexible and Stretchable Sensors.- Chapter 8: Soft Actuators.- Chapter 9: Modeling and Control of Continuum Body.- Chapter 10: Material Intelligence.- Chapter 11: Information Processing using Soft Body Dynamics.

Read more less

Book SynopsisThis volume comprises the select proceedings of the 3rd International Conference on Artificial Intelligence, Robotics, and Communication (ICAIRC 2023). The content focuses on big data and cloud computing and the application of artificial intelligence, robotics and engineering, the Internet of Things, and sensor technology. Some of the topics covered include robot control, perception systems, dexterous manipulation, robot sensing, and data fusion, technology architecture of IoT, information analysis and processing of IoT, dynamic resource supply and consumption, IoT chips and sensors, industrial IoT, and Big Data, the architecture of Big Data, security and privacy of Big Data, management and operation of cloud computing, etc. This volume will be of interest to those working in academia and industry in the fields of computation, communication, and engineering.

Read more less

Book SynopsisThis book focuses on the emerging topic of embedded artificial intelligence and provides a systematic summary of its principles, platforms, and practices. In the section on principles, it analyzes three main approaches for implementing embedded artificial intelligence: cloud computing mode, local mode, and local-cloud collaborative mode. The book identifies five essential components for implementing embedded artificial intelligence: embedded AI accelerator chips, lightweight neural network algorithms, model compression techniques, compiler optimization techniques, and multi-level cascaded application frameworks. The platform section introduces mainstream embedded AI accelerator chips and software frameworks currently used in the industry. The practical part outlines the development process of embedded artificial intelligence and showcases real-world application examples with accompanying code. As a comprehensive guide to the emerging field of embedded artificial intelligence, the boo

Read more less

Book SynopsisThe 9-volume set LNAI 14267-14275 constitutes the proceedings of the 16th International Conference on Intelligent Robotics and Applications, ICIRA 2023, which took place in Hangzhou, China, during July 5–7, 2023.The 413 papers included in these proceedings were carefully reviewed and selected from 630 submissions. They were organized in topical sections as follows:Part I: Human-Centric Technologies for Seamless Human-Robot Collaboration; Multimodal Collaborative Perception and Fusion; Intelligent Robot Perception in Unknown Environments; Vision-Based Human Robot Interaction and Application.Part II: Vision-Based Human Robot Interaction and Application; Reliable AI on Machine Human Reactions; Wearable Sensors and Robots; Wearable Robots for Assistance, Augmentation and Rehabilitation of Human Movements; Perception and Manipulation of Dexterous Hand for Humanoid Robot.Part III: Perception and Manipulation of Dexterous Hand for Humanoid Robot; Medical Imaging for Biomedical Robotics; Advanced Underwater Robot Technologies; Innovative Design and Performance Evaluation of Robot Mechanisms; Evaluation of Wearable Robots for Assistance and Rehabilitation; 3D Printing Soft Robots.Part IV: 3D Printing Soft Robots; Dielectric Elastomer Actuators for Soft Robotics; Human-like Locomotion and Manipulation; Pattern Recognition and Machine Learning for Smart Robots.Part V: Pattern Recognition and Machine Learning for Smart Robots; Robotic Tactile Sensation, Perception, and Applications; Advanced Sensing and Control Technology for Human-Robot Interaction; Knowledge-Based Robot Decision-Making and Manipulation; Design and Control of Legged Robots.Part VI: Design and Control of Legged Robots; Robots in Tunnelling and Underground Space; Robotic Machining of Complex Components; Clinically Oriented Design in Robotic Surgery and Rehabilitation; Visual and Visual-Tactile Perception for Robotics.Part VII: Visual and Visual-Tactile Perception for Robotics; Perception, Interaction, and Control of Wearable Robots; Marine Robotics and Applications; Multi-Robot Systems for Real World Applications; Physical and Neurological Human-Robot Interaction.Part VIII: Physical and Neurological Human-Robot Interaction; Advanced Motion Control Technologies for Mobile Robots; Intelligent Inspection Robotics; Robotics in Sustainable Manufacturing for Carbon Neutrality; Innovative Design and Performance Evaluation of Robot Mechanisms.Part IX: Innovative Design and Performance Evaluation of Robot Mechanisms; Cutting-Edge Research in Robotics.Table of ContentsHuman-centric Technologies for Seamless Human-robot Collaboration.- Method for Identifying Knee Joint Stiffness During Human Standing.- Motion Control and Simulation Analysis of a manipulator Based on Computed Torque Control Method.- Design and Realization of a Multi-DoF Robotic Head for Affective Humanoid Facial Expression Imitation.- Adversarial Attacks on Skeleton-based Sign Language Recognition.- Adaptive Goal-Biased Bi-RRT for Online Path Planning of Robotic Manipulators.- A Novel 3-DOF Spherical Hybrid Mechanism for Wrist Movement: Design, Kinematics, and Simulation.- Dimensional Synthesis of a Novel Redundantly Actuated Parallel Manipulator.- A Novel Hyper-Redundant Manipulator Dynamic Identification Method Based on Whale Optimization and Nonlinear Friction Model.- Study on Shared Compliance Control of Teleoperated Abdominal Ultrasonic Robot.- Construction of Control System on Kinematic Redundant Hybrid Parallel Mechanism for Micro-assembly.- Multimodal Collaborative Perception and Fusion.- Influence of Contact Characteristics on Pressure Sensing of IPMC Sensors.- Optimization-Based Motion Planning Method for a Robot Manipulator under the Conditions of Confined Space and Heavy Load.- Vision-based Categorical Object Pose Estimation and Manipulation.- Animal-Like Eye Vision Assisted Locomotion of a Quadruped Based on Reinforcement Learning.- Abnormal Emotion Recognition Based on Audio-Visual Modality Fusion.- Powerful Encoding and Decoding Computation of Reservoir Computing.- Bidirectional Delay Estimation of Motor Control Systems at Different Muscle Contraction Levels.- Growing Memory Network with Random Weight 3DCNN for Continuous Human Action Recognition.- Sleep-dependent memory replay enables brain-like robustness in neural networks.- Improving Motor Imagery Brain-Computer Interface Per-Formance through Data Screening.- The Impact of Three-Week Passive Robotic Hand Therapy on Stroke Patients.- A Six-Dof Parallel Robot-Assisted Dispensing Platform with Visual Servoing and Force Sensing for Accurate Needle Positioning and Mass Control.- Post-Stroke Motor Function Assessment Based on Brain-Muscle Coupling Analysis.- Factors Affecting the Perception Performance of Biomimetic Tactile Sensing System.- Intelligent Robot Perception in Unknown Environments.- Air-Ground Robots’ Cooperation-Based Mountain Glaciers Thickness Continuous Detection: Systems and Applications.- A Modified Artificial Potential Field Method Based on Subgoal Points for Mobile Robot.- A Modular Tensegrity Mobile Robot with Multi-Locomotion Modes.- Quantum Genetic Algorithm with Fuzzy Control Based on Clustering Analysis.- Design and Research of a Snake-Like Robot Based on Orthogonal Joint and Wheel Modules.- Multi-Sensor Tightly Coupled SLAM Algorithm Based on Feature Planes in Indoor Scenes.- Intelligent Perception Solution for Construction Machinery Based on Binocular Stereo Vision.- Design and Experimental Study of an Intelligent Soft Crawling Robot for Environmental Interactions.- Vision based flame detection using compressed domain motion prediction and multi-feature fusion.- Vision-LiDAR-Inertial Localization and Mapping Dataset of a Mining Cave.- Gesture recognition based on LightViT network against sEMG electrode shift.- Hybrid Scheme for Efficient Deformable Image Registration.- A Trunk Map Construction Method for Long-Term Localization and Navigation for Orchard Robots.- Relational Alignment and Distance Optimization for Cross-modality Person Re-Identification.- RGB-D Camera Based Map Building and Path Planning of Snake Robot.- Map Smoothing Method for Map Distortion with Localization Error.- A Novel Line Approximation Approach for State Updates of Grid Maps.- A Flexible and Highly Sensitive Ultrasonic Transducer for Accurate Three-Dimensional Positioning.- Grasp Compliant Control using Adaptive Admittance Control Methods for Flexible Objects.- Vision-Based Human Robot Interaction and Application.- Research on an Embedded System of Cotton Field Patrol Robot based on AI Depth Camera.- Hard Disk Posture Recognition and Grasping Based on Depth Vision.- Design of a Visual Guidance Robotic Assembly System for Flexible Satellite Equipment Unit Assembly.- Full Resolution Repetition Counting.- Human-robot interactive operating system for underwater manipulators based on hand gesture recognition.- Registration of Structured Light Camera Point Cloud Data with CT Images.- Automatic loading and unloading system with workpiece identification based on YOLOv5.

Read more less

Book SynopsisThe 9-volume set LNAI 14267-14275 constitutes the proceedings of the 16th International Conference on Intelligent Robotics and Applications, ICIRA 2023, which took place in Hangzhou, China, during July 5–7, 2023.The 413 papers included in these proceedings were carefully reviewed and selected from 630 submissions. They were organized in topical sections as follows:Part I: Human-Centric Technologies for Seamless Human-Robot Collaboration; Multimodal Collaborative Perception and Fusion; Intelligent Robot Perception in Unknown Environments; Vision-Based Human Robot Interaction and Application.Part II: Vision-Based Human Robot Interaction and Application; Reliable AI on Machine Human Reactions; Wearable Sensors and Robots; Wearable Robots for Assistance, Augmentation and Rehabilitation of Human Movements; Perception and Manipulation of Dexterous Hand for Humanoid Robot.Part III: Perception and Manipulation of Dexterous Hand for Humanoid Robot; Medical Imaging for Biomedical Robotics; Advanced Underwater Robot Technologies; Innovative Design and Performance Evaluation of Robot Mechanisms; Evaluation of Wearable Robots for Assistance and Rehabilitation; 3D Printing Soft Robots.Part IV: 3D Printing Soft Robots; Dielectric Elastomer Actuators for Soft Robotics; Human-like Locomotion and Manipulation; Pattern Recognition and Machine Learning for Smart Robots.Part V: Pattern Recognition and Machine Learning for Smart Robots; Robotic Tactile Sensation, Perception, and Applications; Advanced Sensing and Control Technology for Human-Robot Interaction; Knowledge-Based Robot Decision-Making and Manipulation; Design and Control of Legged Robots.Part VI: Design and Control of Legged Robots; Robots in Tunnelling and Underground Space; Robotic Machining of Complex Components; Clinically Oriented Design in Robotic Surgery and Rehabilitation; Visual and Visual-Tactile Perception for Robotics.Part VII: Visual and Visual-Tactile Perception for Robotics; Perception, Interaction, and Control of Wearable Robots; Marine Robotics and Applications; Multi-Robot Systems for Real World Applications; Physical and Neurological Human-Robot Interaction.Part VIII: Physical and Neurological Human-Robot Interaction; Advanced Motion Control Technologies for Mobile Robots; Intelligent Inspection Robotics; Robotics in Sustainable Manufacturing for Carbon Neutrality; Innovative Design and Performance Evaluation of Robot Mechanisms.Part IX: Innovative Design and Performance Evaluation of Robot Mechanisms; Cutting-Edge Research in Robotics.Table of Contents​Innovative Design and Performance Evaluation of Robot Mechanisms - Ⅱ.- Design and Analysis of a Novel Ring Truss Deployable Antenna Mechanism.- Model-based Performance Enhancement for Compound Twisted and Coiled Actuators.- Lightweight design method of stacker column structure based on multi-parameter sensitivity analysis.- Optimum Design of 3-UPS/S Parallel Humanoid Wrist Joint.- Kinematic Analysis of Overrunning on a Swing Arm Tracked Mobile Chassis.- Design and Implementation of a Modular Self-reconfigurable Spherical Robot Connected by Magnetic Force.- Graph Synthesis of Generalized Parallel Mechanisms with Coupling Sub-Chains.- Analysis of Mechanism Elastodynamic Performance in Automatic Excavating Process of Excavating Robot.- Measurement and Analysis of End Jitter of Six-axis Industrial Robots.- Description of configuration transformation matrix of reconfigurable mechanism and automatic retrieval and recognition of motion mode.- Design of a voice coil motor-driven multi-DOF parallel micropositioning stage.- Structural Design of a Multi mode Variable Coupling Multi axis Parallel Mobile Robot.- Design and Kinematic Analysis of DNA Nanomachines.- Design and analysis of a new type of solar panel.- Cutting-edge Research in Robotics.- Real-Time Monitoring System of Spray-Painting Robot Based on Five-Dimension Digital Twin Model.- A Methodology for Optimization Design of Parallel Manipulators with Similar Stiffness Performance Design.- Collaborative Robot-Oriented Joint Real-time Control Based on Heterogeneous Embedded Platform.- A Novel Sensitivity Analysis Method for Geometric Errors of a Parallel Spindle Head.- A Novel Prognostic Method for Wear of Sliding Bearing based on SFENN.- Accurate Interpolation Algorithm Based on Fir Filters with Local Dynamic Adjustment.- Investigation of Soft Acoustic Waveguide Dispersion for Wearable Strain Sensing in Human Motion Monitoring.- Design and Optimization of Compliant Rotational Hinge Based on Curved Beam.- A Visual-Inertial Fusion Mapping and Localization System Using AprilTag in GNSS-Denied Scenes .- An Orientation Measurement Method for Industry Robot Based on Laser Tracker.- Programming the Motion of Nanofiber Mat Actuator Through an Area Selective Epoxy Coating Method.- Design of a Multi-Robot Digital Twin System with Bidirectional Motion Synchronization Capabilities.

Read more less

Book SynopsisIntroduction to Haptic Systems.- Control of Haptic Systems.- Input-to-State Stability (ISS) and Haptic Control.- Transparency of Haptic Systems.- Haptic Systems under Time Delay.

Read more less

Book SynopsisThis book is a collection of selected papers presented at the Fourth Congress on Intelligent Systems (CIS 2023), organized by CHRIST (Deemed to be University), Bangalore, India, under the technical sponsorship of the Soft Computing Research Society, India, during September 45, 2023. It includes novel and innovative work from experts, practitioners, scientists, and decision-makers from academia and industry. It covers topics such as the Internet of Things, information security, embedded systems, real-time systems, cloud computing, big data analysis, quantum computing, automation systems, bio-inspired intelligence, cognitive systems, cyber-physical systems, data analytics, data/web mining, data science, intelligence for security, intelligent decision-making systems, intelligent information processing, intelligent transportation, artificial intelligence for machine vision, imaging sensors technology, image segmentation, convolutional neural network, image/video classification, soft comput

Read more less