Engineering applications of surface coatings and films Books
Springer Nature Switzerland AG Mechanical Properties of Nanomaterials
Book SynopsisThis book highlights the mechanical properties of nanomaterials produced by several techniques for various applications. The dislocations observed in specimens obtained in nanomaterials are discussed on the chapter about deformation process. Partial dislocations and grain boundary sliding deformation phenomena in nanomaterial specimens are also deeply discussed. Tests for tension, compression, and hardness are described. The behavior of nanomaterials is compared to macrosize specimens, and the results obtained for different fabrication methods are also compared. The special characteristics of nanomaterials are summarized at the end of the book.Table of ContentsPreface Contents About the Author 1 What are nanomaterials 2 Structure of nanomaterials 3 Basic concepts for producing nanomaterials 4 Imperfections in nanomaterial 5 Static deformation 5.1 tension 5.2 Compression 5.3 torsion 5.4 Flexure (bending) 5.5 Indentation – Hardness 6 Dynamic deformation 7 Time dependent deformation – Creep 8 cyclic deformation – Fatigue 9 Fracture in nanomaterials 10 Epilogue
£170.99
De Gruyter Chemistry of Atomic Layer Deposition
£61.28
De Gruyter Corrosion Mitigation: Biomass and Other Natural Products
Book SynopsisCorrosion Science and Engineering is now an integral part of research throughout the world. Researchers are actively looking for an alternative eco-friendly way of developing non-toxic corrosion inhibitors from natural sources. This book discusses all the recent advancements in the corrosion field with an emphasis on natural sources which is the demand of the era to replace the commercially available toxic corrosion inhibitors.
£84.55
De Gruyter Corrosion Prevention Nanoscience: Nanoengineering Materials and Technologies
Book SynopsisRecently, surface-engineered and modified nanomaterials have been developed as corrosion inhibitors for different metals alloys in coating and solution phases. This book covers current emerging trends and applications in nanomaterials and nanotechnologies and their applications in corrosion prevention. It offers synthesis, surface modification for enhanced dispersibility and protection, composite formation and their anticorrosive applications.
£77.90
Springer Fachmedien Wiesbaden Handbuch Klebtechnik 2018
Book SynopsisDas Handbuch zum Fachmagazin adhäsion KLEBEN+DICHTEN. Das aktuelle Nachschlagewerk für den Klebpraktiker bietet zuverlässige Informationen über Klebstoffanbieter, Geräte- und Anlagenhersteller sowie Trends aus Forschung und Entwicklung. Das Verzeichnis mit über 100 Firmenprofilen liefert einen umfassenden Überblick über Anbieter von Klebrohstoff- und Klebstoffhersteller sowie Unternehmen aus dem Geräte-, Forschungs- und Dienstleistungsbereich - ergänzt durch neueste gesetzliche Vorschriften, europäische Normen und Prüfverfahren sowie statistische Übersichten. Table of ContentsJahresbericht.- Gremien.- Verband europäischer Klebstoffindustrie FEICA.-Firmenprofile Klebstoffhersteller. Firmenprofile Geräte- und Anlagenhersteller.-Firmenprofile Klebtechnische Beratungsunternehmen. -Firmenprofile Institute und Forschungseinrichtungen.- Institute und Forschungseinrichtungen.- Deutsche Gesetzgebung und Vorschriften.- Statistische Übersichten.- Normung.- Bezugsquellen.
£18.99
Springer Fachmedien Wiesbaden Handbuch Klebtechnik 2020
Book Synopsis Das Handbuch zum Fachmagazin adhäsion KLEBEN+DICHTEN. Das aktuelle Nachschlagewerk für den Klebpraktiker bietet zuverlässige Informationen über Klebstoffanbieter, Geräte- und Anlagenhersteller sowie Trends aus Forschung und Entwicklung. Das Verzeichnis mit über 100 Firmenprofilen liefert einen umfassenden Überblick über Anbieter von Klebrohstoff- und Klebstoffhersteller sowie Unternehmen aus dem Geräte-, Forschungs- und Dienstleistungsbereich - ergänzt durch neueste gesetzliche Vorschriften, europäische Normen und Prüfverfahren sowie statistische Übersichten. Table of ContentsJahresbericht.- Gremien.- Verband europäischer Klebstoffindustrie FEICA.-Firmenprofile Klebstoffhersteller. Firmenprofile Geräte- und Anlagenhersteller.-Firmenprofile Klebtechnische Beratungsunternehmen. -Firmenprofile Institute und Forschungseinrichtungen.- Institute und Forschungseinrichtungen.- Deutsche Gesetzgebung und Vorschriften.- Statistische Übersichten.- Normung.- Bezugsquellen.
£21.84
Springer Verlag, Japan Nickel-saving Type High Nitrogen Austenitic
Book SynopsisThis book describes the details of the research and development of nickel-saving high nitrogen austenitic stainless steel and high nitrogen steel (HNS) with excellent corrosion resistance in the sea. This resistance was realized by using nitrogen (N), one of the ubiquitous elements, as an alloying element. By using N it is possible to save nickel (Ni), a national strategic substance in Japan, to be partially reduced or to be totally free. Not only basic information about low nickel HNS but also its promising application to bipolar plates of solid polymer fuel cells are provided. Reduction of Ni ions in the cell environment can be expected to extend the life of the fuel cell. Furthermore, there is discussion of the serendipitous application and impact of nickel-free HNS in the field of biomaterials as an anti-nickel allergy material, leading to its development for coronary stents.The book includes an explanation of how to develop extremely high corrosion-resistance steel by controlling its level of oxygen. For researchers and engineers involved in the development and evaluation of corrosion-resistant materials in particular, this book is extremely helpful for understanding the details of the development of those materials.Table of ContentsResource-Saving -Type High-Nitrogen Austenitic Stainless Steel.- Production of High Nitrogen Steel (HNS).- Production of High Nitrogen Steel by Pressurized ESR Method.- Mechanical Properties of High Nitrogen Steel.- Corrosion Properties of HNS.- Weldability of HNS.- Application of HNS to PEFC Bipolar Plate.
£38.52
Springer Verlag, Singapore Corrosion Control Technologies for Aluminum Alloy Vessel
Book SynopsisThis book elaborates the corrosion testing and assessment methods for the aluminum alloy vessel in the service and internal environment. The emphasis is placed on the research of general materials corrosion characteristics, electrochemical protection design, surface protection, coating and painting, etc. This book helps readers to keep abreast of the whole technology system of the corrosion prevention and control of aluminum alloy vessel, especially the systematic engineering view of life cycle corrosion control for the vessel is of particular interest to readers.Table of ContentsIntroduction.- Service environment of aluminum alloy vessel.- Corrosion tests.- Corrosion characteristics of general materials for aluminum alloy vessel.- Surface protection of aluminum alloys.- Electrochemical protection and design.- Coating and painting of aluminum alloy vessel.- Structural design for corrosion prevention.- Corrosion prevention and control in the manufacturing process.- Corrosion prevention system maintenance and repair for aluminum alloy vessel.
£170.99
Springer Verlag, Singapore A Treatise on Corrosion Science, Engineering and
Book SynopsisThis volume elaborates on various corrosion processes in different applications and their prevention strategies. It comprehensively covers the principles of corrosion, engineering issues, methods of corrosion protection and defines corrosion processes and control in select aggressive end industrial environments. The contents especially focus on corrosion issues in nuclear, aerospace, marine, high temperature, bioimplants, automobile, and addresses the application of advanced materials to mitigate them. A special section on corrosion prevention strategies with innovative solutions to resolve corrosion issues in various environments is the highlight of this book. This volume will be a useful guide for those in research, academia and industry, particularly to know state of art in corrosion control and prevention for various practical applications. Table of ContentsChapter 1: EIS Technique for Corrosion Study and Analysis.- Chapter 2: Laboratory Test Protocols for Corrosion Testing in Upstream Oil Industry: Some Experiences in using Gravimetric Methods.- Chapter 3: Nitric Acid Corrosion Issues of Spent Nuclear Fuel Reprocessing Plant Materials.- Chapter 4: Limitations of 304L Stainless Steel as Alternate Materials for Aggressive Nitric Acid Service in Reprocessing Plants.- Chapter 5: Comparative Study on Surface Modification of Titanium to Improve Corrosion Resistance in Nitric Acid Medium.- Chapter 6: Effect of Metallurgical Variables on the Stress Corrosion Cracking Behavior of AISI type 316LN Stainless Steel.- Chapter 7: Corrosion of Stellite #6 in Permanganate Based Decontamination Formulations.
£123.49
Springer Verlag, Singapore Proceedings of the 7th International Corrosion
Book SynopsisThis book gathers the latest research, innovations, and applications in the field of corrosion prevention and control, as presented by leading national and international academics, researchers, engineers, and postgraduate students at the AWAM International Conference on Civil Engineering 2022 (AICCE’22), held 7th International Corrosion Prevention Symposium for Research Scholars (CORSYM 2021), held as a virtual conference on November 2021. The CORSYM 2021 theme, Nurturing Future Corrosionist for Better Corrosion Mitigation, covered key topics such as corrosion and inhibitors, corrosion of biomaterials, top of line corrosion, H2S and CO2 corrosion, coatings and composites for biomedical devices, electrochemical testing techniques, advanced materials and coatings, corrosion in concrete structures, welding and hot Corrosion, corrosion in ships and marine structures, corrosion of biomaterials, corrosion Under insulation, digitalization in corrosion. The contributions introduce numerous exciting ideas that spur novel research directions and foster multidisciplinary collaborations between various specialists in the field of corrosion engineering.Table of ContentsEffectiveness of Sodium Dodecylbenzene Sulfonate and Zinc Sulfate as Corrosion Inhibitors for Mild Steel in Sodium Chloride Solution.- Effect of Water Resistivity and Coating Material for Cathodic Protection System to Achieve Cathodic Protection Criteria.- The Influence of Sulfate-Reducing Bacteria on Surface Characterization of Carbon Steel in CO2 Environment.- High Temperature Oxidation of T91 Alloy of Steam Reformer.- Corrosion Behavior of Aluminum Alloys in Hydrogen-Chloride Containing Environments.- Mechanical and Corrosion Properties Investigation of Sn-9Zn Solder with The Additions of Nickel-Coated Precipitated Calcium Carbonate.- Producing Blast Furnace Slag Cement Clinker by Utilizing Redox Reaction Approach.- Assessment of Corrosion on Buried Metallic Pipeline Induced by AC Interference Below High Transmission Line.- Metal Dusting Led Failure in A High-Temperature Condenser.- Top of Line Corrosion (TLC) Behaviour with Presence of Gas Condensate in CO2 Wet Gas Pipeline.- High Temperature Corrosion of Hot Dipped Aluminising on Carbon Steel in Dry and Wet Environments.- Effect Of Graphite Particles on Corrosion Resistance Behaviour Of Palm Oil Based UV Curable Coating.- Electrochemical studies of Date Palm Seed as green corrosion inhibitor for carbon steel in 0.5M H2SO4 and CH3COOH Conditions.
£125.99
