Search results for ""Special Interest Model Books""

A comprehensive guide to the use of expanded plastic foam materials in aircraft modelling. This manual quickly takes the newcomer to foam building techniques up to expert level. Foam is a relatively recent addition to the range of materials used to make model aeroplanes, and many modellers are still not familiar with the necessary information and techniques. The author describes the choice of foam, the materials for strengthening and covering, and tools and glues to create not only wings and fuselages, but also cowlings, mouldings and much more besides. This revised edition of David Thomas's book has been extensively updated by Sid King, who has a wide experience of foam modelling and foam component fabrication, both as a hobbyist and commercially. Many new tricks and techniques are included, plus the latest information on the many new materials currently used. The book contains a wealth of useful information for new projects and repairs, and scratch-building from foam.

Read more less

Once people made country wines solely from the fruits of their gardens and local hedgerows, but today there is a wide range of fascinating ingredients available - grape juice, concentrates, grains, dried fruit, exotic fruit juices - to allow winemakers to pursue their crafts all year round, independent of fruiting seasons. Now in its third edition, this book has already reprinted forty-one times and has sold over 500,000 copies. It contains (in alphabetical order from Almond Wine to Yarrow Wine) 130 tried and reliable recipes for country wines and real ales, many of which are unique to this publication and which supplement those found in the author's primer First Steps in Winemaking. The book is illustrated by the well-known winemaking cartoonist Rex Royle.

Read more less

In this valuable book Tubal Cain takes the reader beyond the superficial or the simply practical with explanations of the composition of steel, its additives, and the effects of different temperatures on its constituents. With a grasp of what changes are actually taking place in the metal the care needed in following the practical processes described becomes understandable and will lead to better and more consistent results. Flame, salt bath and furnace heating are detailed, with information on accurate measurement or recognition of temperature levels. For the average small workshop operative or model engineer the discourses on tool material, hardening and tempering will be of most use, and in this connection this book replaced the author's earlier Hardening and Tempering Engineers' Tools, providing a broader-based, more detailed and up to date examination of the subject.

Read more less

If you do not own a milling machine (and even if you do) what you can achieve in your workshop is greatly enhanced if you own a spindle or two for use with your lathe. Spindles come in many shapes and sizes, ranging from 19mm (0.75 in) to 57 mm (2.25 in) in diameter, depending on the uses envisaged for them. This book describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear-cutting frame for clockmakers. The emphasis is on spindles that are easy to make and have as few parts as possible; all but one for example use sealed ball bearings (the exception uses tapered collar bearings and thus needs to have seals installed to protect the bearings.) The basic spindle described uses the same spindle nose as the Myford Super 7 lathe; this allows all chucks, plates, collets and closers designed for the lathe to be used with this spindle. It can also be modified for other lathe nose standards.

Read more less

The art of welding wrought iron has been practiced by village smiths in their forge fires for centuries. Gas and electric arc welding are however comparatively recent developments. This introductory book explains the process as it has been developed and used in industry, and its applications to model engineering. Welding, by oxy-acetylene or electric arc, is a skill in increasing demand and one for which the basics can be learned without great difficulty. In this book, the author sets out the basic techniques and the art for oxy-acetylene welding, brazing, flame-cutting and electric arc welding with mild steel, cast iron, stainless steel, copper, brass and aluminium etc in sheet plate or cast form.

Read more less

Despite the growing numbers of milling machines in amateur workshops, a majority of model engineers still rely on a lathe and a drilling machine as the basic equipment. The lathe, 'the king of machine tools', can be adapted for almost any function, but next to turning its most valuable use is for milling operations, either using the lathe itself to drive the cutters or by extending its scope by the addition of a separate milling attachment. One of the most popular titles in model engineering books for almost sixty years was Milling in the Lathe, which first appeared in the 1920s and continued in updated and revised editions until 1983. This book replaces it, covering all the basic information it contained and adding to it from recent experiences and developments. The author, Tubal Cain, needs no introduction to Model Engineer readers as a highly experienced engineer and skilled craftsman with an ability to write on engineering subjects in a clear, simple and thorough style.

Read more less

Sharpening workshop tools is probably the most diverse of all workshop activities and the one that is least understood by the majority of workshop owners. This is not unreasonable in view of the wide range of equipment suggested for the task, ranging from the complex, typically an industrial tool and cutter grinder, through to the humble off hand grinder. This book illustrates how most sharpening tasks can be carried out using an off hand grinder and a few simply made accessories, whilst doing this to a standard comparable to that achieved using much more sophisticated equipment. A lack of understanding of the processes almost certainly results in the workshop owner attempting tasks with far from perfect cutting tools that can diminish the satisfaction of a job well done. With the information in this book this situation can be avoided and working with blunt tooling should be a thing of the past.

Read more less

Faced with the prospect of machining a gear or gears for a project, many model engineers will be discouraged and will turn elsewhere for their next model. This need not be so, for the principles underlying gear cutting and many other aspects of engineering where an accurate division of circles is required are explained in depth in this book. Radial work on a metalworking lathe, such as the cutting of gearwheels or the drilling of holes on a set radius, calls for a method of precisely spacing the cuts. This skill is known as Dividing. The principles underlying this aspect of engineering are explained in depth in this book. It covers the subject of Dividing, dealing with the many methods that can be adopted: from simple applications without specialised equipment to the use of a semi-universal dividing head and a rotary table. The mathematical aspects of dividing are also covered but at a level that will be understood easily by a model engineer. Dividing equipment is relatively expensive, so two fully-detailed designs are included for dividing heads: a basic unit and the equivalent of a commercial semi-universal head.

Read more less

Originally published in 1963, this was the first modern book on home brewing and was an instant success. Since then, the book has gone through many revised and improved editions and to date has sold 750,000 copies. This latest edition contains full instructions on how to brew fine beers and stouts of authentic flavour and strength. From palest lager to blackest extra stout, these are brews of which you can be proud. There is much more to the home brewing hobby than simply making up a kit; home brewers need to know the theory behind the techniques they use and how to devise their own formulations for any type of beer. This book is the ideal introduction to the subject.

Read more less

Joining metals by one form or another of soft or hard soldering, or brazing with various alloys, are run-of-the-mill jobs in model and light engineering workshops - so much so that little thought is given as to whether there might be a quicker, more efficient or less expensive means of achieving the required end. In Soldering and Brazing respected engineering writer Tubal Cain examines in detail the processes, equipment and materials, and explains what is happening in the joints as they are made with practical examples, test pieces, tabulated data etc. This is a thorough, comprehensive and, above all, useful book.

Read more less

3D printing is a new craft technique that seems like science fiction. Objects appear to be created out of nothing - as if by magic. This book shows you the practice of 3D printing at home. It gives the reader an overview of the basics of this technique and the materials and the knowledge you need for a successful start in the use of 3D printing. The hardware and software you need is described, and tips and tricks for the practical application of 3D printing are given. If you aspire to use 3D printing for your hobby or for spare parts, this book is a guide for your first steps into a new future: - What is 3D printing? - The differences between 3D printers. - The way to your first print. - Software for construction, preparation of printing and the printing process. - Printing practice. - What can I do with my printer? - Printing at service providers.

Read more less

This is the book for the winemaker who likes the ease and convenience of making wine from concentrates for those who enjoy wine but lacks the facilities to make it from grapes and other fruits. The recipes in this edition are formulated from concentrates which are readily available to make 1-2 gallon batches of wine. The book is the culmination of many years of work with concentrates from all over the world. Peter Duncan's vast experience and knowledge of the way wine can be made with concentrates is all here in these pages - this is the book that every winemaker who uses them will want to keep for ready reference.

Read more less

Stan Bray introduces the fascinating world of horology to the complete beginner. This book explains the terminology of the clockmaker and provides general details of clock construction including layout of wheels and escarpments, a number of the latter being described. Making of wheels, pinions, escarpments, plates, pendulums, weights, cases, hands and faces is described. The necessary tools and equipment are described with details of how to make specialized items and choice of most suitable materials for their construction.

Read more less

Although much of model engineering work is a matter of making one part to fit another and thus may obviate the need for the sophisticated means of measuring often called for in production engineering, the accuracy of a finished job begins with the exactness of the initial making out and continues with the accuracy of measurements made during the progress of the work. How to use measuring equipment and how to mark out work - not always the simple matter it might at first seem - are essential skills for any engineer and the purpose of this book is to show how they may be acquired and employed.

Read more less

The 'Scanners' series of books have been consistent bestsellers, being the UK's leading guides to receiving equipment employed by enthusiasts to monitor the short wave and VHF/UHF wavebands used by airfields, maritime and rescue services, and analogue and digital two-way private mobile radio systems. This new (seventh) edition covers the rapidly increasing trend towards digital two-way radio communications and the latest handheld and mobile/base scanners with some digital modes fitted. It has been fully re-written and updated to include the latest UK radio frequency listings and call signs for airports, maritime and emergency services and other professional organisations. The book covers the latest shifts in the hobby towards digital and PC- and tablet-controlled radio technology and illustrates the very latest commercial radio scanning equipment and accessories. Included are details of an increasing number of 'apps' for smartphones specifically for radio data decoding, including programs for digital scanner communications decoding for which a smartphone can be linked to an existing scanner radio to decode. Other innovations include TETRA as used by police, ambulance, fire and rescue services, and DMR modes such as Mototrbo. It is predicted that by 2016, fifty per cent of two-way radio communication in the UK will use digital modes.

Read more less

This book deals with principles and characteristics of the wide range of motor types likely to be useful in small engineering workshop applications. It also covers matters such as speed control, electric braking, generators, installation and safety aspects - everything, in fact, of practical value to the small workshop user. In the years since the publication of the first edition, the book has become a well-established reference source for users to dip into when more information is needed on how motors behave both in standard usage and also in less common applications. In this time a lot has happened in the field of motor design. This second edition now contains updated information covering both these later developments in motor types and their control systems. A major section is devoted to the characteristics and installation of Variable Frequency Drive units (VFDs). It also covers the operating differences between North American and European power systems.

Read more less

Every working model includes bearings, often a large number of them. This practical book describes the wide and diverse range of bearings found in the large variety of different types of models built in home workshops. It reviews the choice of bearings materials, the type of bearing to use for each particular application and highlights the differences between home-made and off-the-shelf bearings. It also considers the installation and care of bearings. Furthermore, it covers several full-size applications undertaken by model engineers, such as clock making and machine tool maintenance, which also call for some knowledge of bearings. It is now over forty years since Ian Bradley and Norman Hallows published the slim MAP volume Bearing Design and Fitting and much has changed in the bearing field since that date. This book provides a welcome addition to the Workshop Practice Series of books and will be welcomed by all model engineers, whatever their area of interest.

Read more less

This latest volume in the Workshop Practice Series presents a general overview of the grinding, lapping, honing and polishing of metal, as well as the materials used to make grinding wheels, belts and papers. The uses of various machines and grinding mediums are described, including the off-hand grinder, modern miniature hand drill/grinders and toolpost grinders. There are also instructions for making a small barrelling machine and other suitable devices.

Read more less

However well equipped the workshop may be there seems to be an incessant need to make up special gadgets of one sort or another. These may range from mutilating a clothes peg to act as a 'third hand' up to major modifications to an existing machine tool. The making of such devices can be fun (indeed, some may appear to do nothing else!) but nevertheless the time taken up in 'devising the device' can often delay the completion of an important project. Shared experience is a most potent tool in reducing such delays, and can, moreover, often provide solutions to problems hitherto believed to be intractable. Tubal Cain has enjoyed more than sixty years' experience in designing and building engines and machines (in both full size and model dimensions) and over this time has made many ancillary devices. In this book he shares 52 of them with you. A number of these had been published in magazines from time to time and some were assembled in volume form about thirty years ago. The opportunity was later taken not only to reprint that book but to revise some of the entries to take advantage of user experience, to add new material and to introduce it into the popular Workshop Practice Series.

Read more less

Sparkling wines, or champagnes, are synonymous with celebration and happiness. These festive wines have a charm and attraction all their own. The authors have spent decades exploring the techniques of sparkling wine production and discovering the secrets of producing champagne-like wine of superb quality. For any winemaker to be able to produce his or her own sparkling wine is one-upmanship to the nth degree! Yet it is perfectly possible. In this revised and updated edition, the authors share their expertise with you, and whether you are a beginner or an experienced winemaker, you will find this book contains all the information necessary to make your own sparkling wines.

Read more less

Gears in one form or another are a part of most mechanisms, but they are by no means as simple as they may appear. This book explains simply, clearly and comprehensively the underlying theory involved and, in its second part, how to cut gears on a lathe or milling machine. Explanations and reasons for all conventional types of gears are clearly set out in this book together with useful tables and machinery techniques to form an invaluable reference work for anyone dealing with machinery. It covers all the questions raised by enthusiasts who have watched the author demonstrating gear-cutting techniques at exhibitions throughout Britain, where his advice on engineering matters has been constantly sought.

Read more less

One of the most useful functions of a modern lathe is its ability to cut any form of external or internal thread of any thread form, pitch or diameter within the overall capacity of the machine. Detailed information of a practical nature is, however, not easy to find - a situation that this book does much to rectify. The author was a very experienced engineer with the capability of converting factual analyses into easily understood forms. His own expertise and the standards to which he worked are evident in his writing, and in addition he is also quite at home with both imperial and metric measures having considerable experience in the conversions required when working in partially metricated areas. This book is not only an invaluable treatise on lathe screwcutting but is also a useful demonstration of working in both imperial and metric standards.

Read more less

Ian Bradley's classic guide to using Myford 7 series metalworking lathes in the home workshop was first published in 1973. The author revised the work in the 1980s to include the ML7, Super 7 and ML7-R lathes, so that the contents of the book are as valuable to readers who have the latest type of lathe, as well as those who possess the earlier machines. This book is intended to be a workshop companion rather than simply a work of reference. It deals with the use of the lathe and the many items of equipment that have been provided for it.

Read more less

From the simple to the sophisticated, a detailed look at the making of ten new static model ship projects which demonstrate the transition from kits to scratch building. Chapters dedicated to the building of each vessel lead the model maker through the various phases of construction, advising on both the methods and procedures required to build models up to exhibition standard. The range of subjects extends from the simple Bounty's Jolly Boat to HMS Bounty itself. The huge San Felipe is representative of the Spanish warship of the late 17th century, and the 1:48 scale Viola takes the modeller into the fascinating world of early twentieth century American whaling. A later chapter summarises rigging terminology and modelling techniques - that part of the building process that unjustifiably deters many from delving into the most satisfying hobby of static model sailing ships.

Read more less

Mead is an alcoholic drink made by fermenting honey and water with yeast. A glass of lightly chilled mead on a summer's evening is a splendid delight. And yet, of all the crafts of mankind, mead-making is certainly one of the oldest. It is likely that mead was made even before the wheel was invented as stone-age cave paintings depict the collection of honey from bee colonies. The drink made from honey became a staple of Celtic, Anglo-Saxon, Medieval and Renaissance Britain. This practical book will inspire you to take up this admirable craft. It includes chapters on honey selection, mead-making techniques, and forty-two recipes for mead, melomel (using honey mixed with fruit juice), pyment (honey mixed with grapes), hippocras (honey mixed with grapes and herbs), metheglin (spiced medicinal mead), cyser (honey mixed with apples) and other honey drinks.

Read more less

This book contains a comprehensive range of data, which is required in the metalworking workshop and by those designing a wide range of engineered items, tools and machines. It provides, in a single concise volume, data that is only otherwise available by reference to many different sources or more expensive publications. For those involved in restoration work, the book also includes details of items not now used, and for which data is not easy to locate. Harold Hall was, for a number of years, the editor of Model Engineers' Workshop magazine and is the author of four previous books in this indispensable series.

Read more less

This is the latest edition - fully revised and updated - of the standard textbook on aerodynamic theory, as applied to model flight. Everything is explained in a concise and practical form for those enthusiasts who appreciate that a better understanding of model behaviour is the sure path to greater success and enjoyment, whether just for fun or in competition. The revisions for this new edition reflect the significant developments in model aircraft during the last few years, and include brand new data: - The chapter on aerofoils has been rewritten to take account of the vast amount of testing carried out recently in the USA by the University of Illinois. - A brand new chapter explains the latest research into the flight of birds and insects and how it is applied to small drones and model-sized surveillance aircraft. - Older wind tunnel test reports all replaced with the latest trials and measurements.

Read more less

This book follows on from the same author's introduction to the Mini-Lathe (Workshop Practice Series No. 43) and presents a series of projects which are intended to extend the versatility of this little machine. In some cases, additional machining capacity will be required, which some readers may find at their local model engineering club. The book covers the Mark 2 Mini-Lathe, and specific tools such as the radius turning attachment, the tailstock and the dividing head, and includes techniques such as taper turning and knurling. Whilst specifically written for the Mini-Lathe, some of the projects in this book can equally be applied to other small model engineering lathes and in many cases the concepts can be scaled to suit other equipment.

Read more less

When Harold Hall was Editor of Model Engineer's Workshop magazine, he was surprised by how just so many of his readers had no access to a workshop at home, or even at college. This book presents a complete guide to building or converting a workshop space and then equipping it to serve a wide range of metalworking activities including model engineering, model making, car restoration and clockmaking. It explains all the essential requirements of the workshop environment: planning, heating and lighting, condensation plus health and safety factors. It then explains in detail the choice of various tools and equipment for differing tasks so the new workshop owner can avoid making unwise purchases. The book is based on a very popular series of articles which originally appeared in the pages of Model Engineers' Workshop magazine, and which have been revised for publication in this edition.

Read more less

The Mini-lathe has become the best-selling item of machinery in the hobby engineering market - often purchased as a first step by beginners to the hobby. For many years Myford lathes were considered as 'standard issue' for model engineers, but at about one-twentieth of the price of a new Myford, these new Mini-lathes set the benchmark for the future. This book is a complete course on using and improving this new generation of budget lathes. It explains everything from setting up and 'tuning' the machine for best performance to using accessories and carrying out tasks. The Mini-Lathe covers: Safety, Preparing the lathe, Tooling materials & geometry, Tooling up, Getting started, Gear cover, Head stock dividing attachment, Modifications for milling, Improving rigidity, Making a part off too , Guided centre punch, filing rest, use of steadies and chuck depth stop, Toolpost powered spindle, saw table and grinding rest , DRO handwheels, taper roller bearings.

Read more less

This book describes the many varied materials used by model engineers in their workshops such as iron and steel, non-ferrous metals including aluminium, brass and copper, hard and soft woods and a number of engineering and other plastics. It also contains details about abrasives, adhesives, bearing materials, ceramics and refractory materials, coatings, electroplating solutions, fuels, gases, lubricants, pickles, polishing materials, sealants and solders. It provides an easy reference for those seeking the right material for the task or an item specified on plan. Packed full of useful information, the book is aimed at those who build model locomotives, traction, boat and stationary steam engines, oil, diesel, glow and petrol engines, gas turbines, artillery pieces, farming appliances, carriages and other road vehicles as well as those who make clocks and workshop tools. It is also directed at those working with full-size machinery, such as vintage cars, motor and pedal cycles, traction engines and railway locomotives.

Read more less

The Unimat 3 was a well made and enormously popular lathe; when equipped with a range of accessories it is still an excellent machine for smaller modelling and experimental jobs; it will accomplish in miniature what many larger machines are capable of and will provide the owner with enormous satisfaction. Bob Loader has become an authority on the Unimat mini-lathe, developing numerous accessories and techniques to assist the model engineer in getting the best from the machine. The projects described here increase the scope of the machine and advise on the performance of a number of tricky operations. Invaluable to all Unimat owners.

Read more less

Full size photocopiable plans for eight flying models using carbon dioxide power. These classic facsimile designs originally appeared in Aeromodeller magazine between 1981 and 1987.

Read more less

A very popular title that reprints regularly, this book contains full instructions for making real draught ale, bottled and keg beers, lagers and stouts from around the world, all at a fraction of the price you would pay in a pub. Home brewing is now an established hobby backed by a mature industry that provides all the necessary ingredients as used by the commercial brewers. Many of the 107 recipes in this book have been adapted from information given by the breweries themselves about their particular beers, so first-class results are virtually assured. Beers replicated in this book include: Guinness; Carling Black Label; Worthington White Label; Thomas Hardy Ale; Greene King Pale Ale; Newcastle Brown Ale; Mackeson; Fullers ESB; Brakspears Special Bitter; Fullers London Pride; Eldridge Pope Royal Oak; Greene King Abbot Ale; Marston's Pedigree; Samuel Smith's Old Brewery Bitter; Theakstons' Old Peculiar; Wadsworth's 6X; Youngs Special Bitter; Stella Artois; Pilsner Urquell; Budweiser.

Read more less

In this book you will find many homebrew recipes which will allow you, the craft brewer, to make superb real ales at a fraction of the price of those that are commercially available. With easy-to-follow instructions, both beginners and seasoned mashers can quickly start brewing classics such as Flowers Original Bitter, Belhaven Sixty Shilling Ale, Whitbread Best Bitter, Castle Eden Ale, Wadworth 6X and Marston Moor Porter. All the recipes are based on information supplied by the breweries which, combined with your own skill and quality ingredients from specialist homebrew suppliers, will virtually guarantee superb resulting ales.

Read more less

This book is a round-the-year guide to wine and beer making, covering dry and sweet wines, beers, lagers, liqueurs and fortified wines. In the introduction, the author explains the basic principles of the craft and advises on health and safety and the choice, use and care of equipment. The main body of the text, fully illustrated with delicate line drawings, is a season-by-season guide to ingredients and recipes for making wines and beers to suit all tastes.

Read more less

Computers are a closed book to many of the older generations of model engineers, despite the fact that more than one-third of all British households now have a personal computer. By taking one step at a time, the computer can soon be tamed and turned into a versatile drawing tool with many advantages over traditional draughting methods. Derek Brown's demonstrations and lectures on the subject at various model engineering exhibitions over the past few years have proved very popular. In this book he seeks to strip away the mystique surrounding the subject by avoiding jargon and providing practical advice on how to choose the right system and to make progress with it.

Read more less

Through the pages of Model Engineers' Workshop magazine, author Harold Hall, has established a reputation for introducing the tyro model engineer to a wide range of machine tool operations. In this book he introduces the milling machine. This book assumes no previous experience of using the milling machine and through the medium of four minor and four major projects will lead prospective users of the milling machine through all of the techniques involved. Whilst the detailed descriptions in the book are aimed primarily at those wishing to extend their knowledge of milling, the projects will be of use to the experienced operator wishing to add to their workshop equipment. All of the projects are extensively illustrated and include full workshop drawings. Once followed through, the reader will have amassed a wealth of practical skills and added a number of useful items to his range of workshop equipment.

Read more less

Radio controlled model boating began to establish itself as a popular hobby in the 1950s and there was great excitement, even credulity, among onlookers when they realised that a model was responding to commands sent from a radio transmitter. Nowadays a bystander is more suspect if a model does not have radio control! In the interim, the equipment used has made great strides to the point where the user has little more to do than fit batteries and plug the components together. No technical knowledge whatsoever is required. However, guidance is needed to install the equipment in the model and to learn how to use it to best advantage. John Cundell is an author and journalist with many years of boat modelling at national and international level. In his capacity as editor of Model Boats magazine, he is very aware of the type of questions likely to be asked by the less experienced and knows the problem areas likely to be encountered by the unsuspecting newcomer to the hobby. This book, first published in 1986, is a totally practical book and in this fourth revised edition, it brings you right up to date with the latest developments. If you carefully follow the simple procedures which are clearly explained you will undoubtedly be on the road to success in this fascinating hobby.

Read more less

The accumulation of odds and ends of bar and rod is inevitable with any lathework, but rather than throw them into an ever-growing scrap-box, why not turn them into useful little tools to simplify and speed up future work? In this book Stan Bray describes twenty-two simple but useful adjuncts to the tool kit for bench and lathe use, none taking any more than 3 to 4 hours or involving special materials, yet each able to save considerable time in use as well as aiding accuracy. You may not see an immediate need for some of them, but once made it is surprising how often they will be used. There is also the satisfaction of turning what might have been wasted into something useful and the knowledge that money has been saved.

Read more less

If fear of the unknown is all that is preventing you from embarking on the satisfying hobby of model engineering, then this is the book that will banish your concerns. Author Harold Hall has established his reputation as a mentor to tyro model engineers through the pages of Model Engineer magazine and Model Engineers' Workshop, of which he was the editor for a number of years. This book assumes no previous experience and using the medium of twelve lathe turning projects will lead prospective model engineers through all of the basic techniques needed to tackle ambitious projects. All of the projects are extensively illustrated and full working drawings accompany the text. Once followed through, the reader will have amassed a wealth of practical skills and a range of useful workshop tools and equipment.

Read more less

Written by an experienced engineer, this new primer textbook covers all the basic techniques of model engineering: understanding engineering drawings; setting up a workshop; buying materials; marking out; sawing; filing; bending & forming metals; drilling & boring holes. The book includes a review of the properties and characteristics of engineering materials and describes the hardening of carbon steel for cutting tools in the home workshop. Sources of information for model engineers are described together with the principal types of activity and common modelling scales. Points for consideration when buying a lathe are covered, plus how it should be set up and operated. Also included is information on the preparation and sharpening of lathe tools and their use for the basic turning processes. A major chapter is dedicated to the adaptation of the lathe for milling and boring, and the use of the commonest types of milling cutter. Profusely illustrated with line drawings and photographs, this is a comprehensive guide aimed at students and practical people with little experience of working with metal and wishing to embark on this fascinating hobby.

Read more less

Since 1898, Model Engineer magazine (originally weekly, now fortnightly) has proved a remarkable source of knowledge for all manner of engineering practices. Its readership has always included many highly experienced engineers, some of considerable eminence, who have answered readers' questions and contributed valuable information in order that everyone the construction and use of machines should be able to extend his scope and skills. The answer to virtually any engineering problem can be found somewhere in its pages, it is said. Many of the magazine's most helpful nuggets of knowledge have appeared in brief notes or articles, often many years ago, and have never been republished. This book offers a selection of fascinating hints and tips culled from the magazine's wide time-scale (from the 1890s to the 1960s) but as relevant today as when they were first printed. They may save the reader time and possibly money; certainly they will interest and instruct anyone who works with metal.

Read more less

At one time, most towns of any size had somewhere a small foundry that would undertake small casting jobs, often more out of interest and good neighbourliness than for commercial gain. Regrettably, those days are no more and the model engineer in many areas must either adapt commercially available castings or send away to a specialist foundry that will undertake small jobs, often at some expense and with some delay. The alternative is to make your own patterns and castings, which is in fact much easier than you may think. The Backyard Foundry covers basic principles, materials and techniques, pattern making, moulding boxes, cores and core-boxes, electric, gas and coke furnaces, and includes step-by-step procedures with examples of locomotive cylinders and wheels. Sources of specialised materials and even the design of an outdoor furnace suitable for small-scale commercial work are given. Each stage and subject is covered in detail so that even the inexperienced can undertake casting with confidence. Although the book is written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.

Read more less

All professional engineers have a little book in which they jot down those notes of fact, figures and formulae which they feel that they are likely to need on future occasions. It is always more convenient to look up one's own records than to wade through a lot of associated, but irrelevant material, especially as this may mean a trip to the reference library. Over a period of years, the contents of such notebooks grow to cover a wealth of vital information, and the time saved can be considerable. During his professional life, Tubal Cain filled three such books and, as a lifelong engineer, he is in a unique position to select (and add to) the material most useful to the amateur engineer. Model Engineer's Handbook comprises a compilation of those tables, facts, procedures and data which the author himself found valuable in his model engineering activities and it provides a real mine of information to which you will return again and again. Not the least of its attributes is the use, where appropriate, of data and calculations in both Imperial and SI units, so that all generations of model engineers can feel at home. In this third edition, all the existing data has been updated or re-arranged for greater clarity and much new matter has been added to provide an even more comprehensive book, indispensable to the expert and beginner alike.

Read more less

The major difference between free-flight and radio-controlled scale models is that all the adjustments to the flight path of the former must be made before release. Free flight models must be capable of stable flight, whether under power or on the glide, without the need or the opportunity to carry out in-flight alterations. This is a challenge most surely met by lightly loaded, slow-flying models based on full size machines having those characteristics, best typified by early bi-planes.

Read more less

The centre-lathe is by far the most versatile machine tool in the workshop, but as soon as you depart from plain turning between centres, the question arises 'how to hold the work'. This book explains the methods and techniques required. A fundamental requirement of lathe operation, for accuracy and safety, is the ability to hold any workpiece securely and, preferably, repeatedly on the machine. While few problems arise with straightforward work on a properly aligned lathe, the variety of jobs undertaken by small workshops and model engineers is bound to give rise to occasions when how to hold work requires consideration. When great accuracy is essential, working methods and lathe set-up are vital for an acceptable result. In this book Tubal Cain discusses in his inimitable, practical style all aspects of the subject with the whys and hows, including basic lathe alignment.

Read more less

A considerable amount of engineering work takes place on the bench, using hand tools and techniques which are second nature to those who earn their living in an engineering environment; they probably learned at a technical college, as an apprentice, or possibly by the example of older and more experienced workmates. The amateur or hobbyist engineer may not have enjoyed such advantages and, for example, may break a lot of hacksaw blades because he has not been shown how to use the saw or what sort of blades he should be using. This book sets out to cover all the normal bench processes in a simple but informative manner which should help all who have come to enjoy working with metals but whose education did not include a grounding in the basics of engineering benchwork.

Read more less