Description
Book SynopsisDue to its many potential benefits, including high electrical efficiency and low environmental emissions, solid oxide fuel cell (SOFC) technology is the subject of extensive research and development efforts by national laboratories, universities, and private industries.
Table of ContentsPreface xi
Introduction xiii
Overview and Current Status
Development of Two Types of Tubular SOFCs at TOT0 3
Akira Kawakami, Satoshi Matsuoka, Naoki Watanabe, Takeshi Saito, Akira Ueno, Tatsumi Ishihara, Natsuko Sakai, and Harumi Yokokawa
Cell and Stack Development
Development of Solid Oxide Fuel Cell Stack Using Lanthanum Gallate-Based Oxide as an Electrolyte 17
T. Yamada, N. Chitose, H. Etou, M. Yamada, K. Hosoi, N. Komada, T. Inagaki, F. Nishiwaki, K. Hashino, H. Yoshida, M. Kawano, S. Yamasaki, and T. lshihara
Anode Supported LSCM-LSGM-LSM Solid Oxide Fuel Cell 27
Alidad Mohammadi, Nigel M. Sammes, Jakub Pusz, and Alevtina L. Smirnova
Characterization/Testing
Influence of Anode Thickness on the Electrochemical Performance of Single Chamber Solid Oxide Fuel Cells 37
B. E. Buergler, Y. Santschi, M. Felberbaum, and L. J. Gauckler
Investigation of Performance Degradation of SOFC Using Chromium-Containing Alloy Interconnects 47
D. R. Beeaff, A. Dinesen, and P. V. Hendriksen
Degradation Mechanism of Metal Supported Atmospheric Plasma Sprayed Solid Oxide Fuel Cells 55
D. Hathiramani, R. VaOen, J. Mertens, D. Sebold, V. A. C. Haanappel, and D. Stover
Effect of Transition Metal Ions on the Conductivity and Stability of Stabilized Zirconia 67
D. Lybye and M. Mogensen
Thermophysical Properties of YSZ and Ni-YSZ as a Function of Temperature and Porosity 79
M. Radovic, E. Lara-Curzio, R. M. Trejo, H. Wang, and W. D. Porter
Physical Properties in the Bi2O3-Fe2O3S ystem Containing Y2O3 and CaO Dopants 87
Hsin-Chai Huang, Yu-Chen Chang, and Tzer-Shin Sheu
Electrical Properties of Ce0.8Gd0.2O1.9 Ceramics Prepared by an Aqueous Process 95
Toshiaki Yamaguchi, Yasufumi Suzuki, Wataru Sakamoto, and Shin-ichi Hirano
Structural Study and Conductivity of BaZr0.90Ga0.10O2.95 105
lstaq Ahmed, Elisabet Ahlberg, Sten Eriksson, Christoper Knee, Maths Karlsson, Aleksandar Matic, and Lars Borjesson
Hydrogen Flux in Terbium Doped Strontium Cerate Membrane 119
Mohamed M. Elbaccouch and Ali T-Raissi
A Mechanical-Electrochemical Theory of Defects in Ionic Solids 125
Narasimhan Swaminathan and Jianmin Qu
Electrodes
Nanostructured Ceramic Suspensions for Electrodes and the Brazilian SOFC Network "Rede PaCOS" 139
R. C. Cordeiro, G. S. Trindade, R. N. S. H. MagalhSies, G. C. Silva, P. R. Villalobos, M. C. R. S. Varela, and P. E. V. de Miranda
Modeling of MlEC Cathodes: The Effect of Sheet Resistance 153
David S. Mebane, Erik Koep, and Meilin Liu
Cathode Thermal Delamination Study for a Planar Solid Oxide Fuel Cell with Functional Graded Properties: Experimental Investigation and Numerical Results 161
Gang Ju, Kenneth Reifsnider, and Jeong-Ho Kim
Electrochemical Characteristics of Ni/Gd-Doped Ceria and Ni/Sm-Doped Ceria Anodes for SOFC Using Dry Methane Fuel 175
Caroline Levy, Shinichi Hasegawa, Shiko Nakamura, Manabu Ihara, and Keiji Yamahara
Control of Microstructure of NiO-SDC Composite Particles for Development of High Performance SOFC Anodes 183
Koichi Kawahara, Seiichi Suda, Seiji Takahashi, Mitsunobu Kawano, Hiroyuki Yoshida, and Toru lnagaki
Electrochemical Characterization and Identification of Reaction Sites in Oxide Anodes 193
T. Nakamura, K. Yashiro, A. Kairnai, T. Otake, K. Sato, G.J . Park, T. Kawada, and J. Mizusaki
Interconnects and Protective Coatings
Corrosion Performance of Ferritic Steel for SOFC Interconnect Applications 201
M. Ziomek-Moroz, G. R. Holcomb, B. S. Covino, Jr., S. J. Bullard, P. D. Jablonski, and D. E. Alrnan
High Temperature Corrosion Behavior of Oxidation Resistant Alloys Under SOFC Interconnect Dual Exposures 211
Zhenguo Yang, Greg W. Coffey, Joseph P. Rice, Prabhakar Singh, Jeffry W. Stevenson, and Guan-Guang Xia
Electro-Deposited Protective Coatings for Planar Solid Oxide Fuel Cell Interconnects 223
Christopher Johnson, Chad Schaeffer, Heidi Barron, and Randall Gemmen
Properties of (Mn,Co)3O4 Spinel Protection Layers for SOFC Interconnects 231
Zhenguo Yang, Xiao-Hong Li, Gary D. Maupin, Prabhakar Singh, Steve P. Sirnner, Jeffry W. Stevenson, Guan-Guang Xia, and Xiaodong Zhou
Fuel Cell Interconnecting Coatings Produced by Different Thermal Spray Techniques 241
E. Garcia and T. W. Coyle
Surface Modification of Alloys for Improved Oxidation Resistance in SOFC Applications 253
David E. Alman, Paul D. Jablonski, and Steven C. Kung
Seals
Composite Seal Development and Evaluation 265
Matthew M. Seabaugh, Kathy Sabolsky, Gene B. Arkenberg, and Jerry L. Jayjohn
Investigation of SOFC-Gaskets Containing Compressive Mica Layers Under Dual Atmosphere Conditions 273
F. Wiener, M. Brarn, H.-P. Buchkrerner, and D. Sebold
Performance of Self-Healing Seals for Solid Oxide Fuel Cells (SOFC) 287
Raj N. Singh and Shailendra S. Parihar
Properties of Glass-Ceramic for Solid Oxide Fuel Cells 297
S. T. Reis, R. K. Brow, T. Zhang, and P. Jasinski
Mechanical Behavior of Solid Oxide Fuel Cell (SOFC) Seal Glass-Boron Nitride Nanotubes Composite 305
Sung R. Choi, Narottam P. Bansal, Janet B. Hurst, and Anita Garg
Mechanical Behaviour of Glassy Composite Seals for IT-SOFC Application 315
K. A. Nielsen, M. Solvang, S. B. L. Nielsen, and D. Beeaff
Mechanical Property Characterizations and Performance Modeling of SOFC Seals 325
Brian J. Koeppel, John S. Vetrano, Ba Nghiep Nguyen, Xin Sun, and Moe A. Khaleel
Mechanical Properties
Fracture Test of Thin Sheet Electrolytes 339
Jurgen Malzbender, Rolf W. Steinbrech, and Lorenz Singheiser
Failure Modes of Thin Supported Membranes 347
P. V. Hendriksen, J. R. Hprgsberg, A. M. Kjeldsen, B. F. Sorensena, and H. G. Pedersen
Comparison of Mechanical Properties of NiO/YSZ by Different Methods 361
Dustin R. Beeaff, S. Ramousse, and Peter V. Hendriksen
Fracture Toughness and Slow Crack Growth Behavior of Ni-YSZ and YSZ as a Function of Porosity and Temperature 373
M. Radovic, E. Lara-Curzio, and G. Nelson
Effect of Thermal Cycling and Thermal Aging on the Mechanical Properties of, and Residual Stresses in, Ni-YSZ/YSZ Bi-Layers 383
E. Lara-Curzio, M. Radovic, R. M. Trejo, C. Cofer, T. R. Watkins, and K. L. More
Three-Dimensional Numerical Simulation Tools for Fracture Analysis in Planar Solid Oxide Fuel Cells (SOFCs) 393
Janine Johnson and Jianmin Qu
Modeling
Electrochemistry and On-Cell Reformation Modeling for Solid Oxide Fuel Cell Stacks 409
K. P. Recknagle, D. T. Jarboe, K. I. Johnson, V. Korolev, M. A. Khaleel, and P. Singh
Modeling of HeaVMass Transport and Electrochemistry of a Solid Oxide Fuel Cell 419
Yan Ji, J. N. Chung, and Kun Yuan
Author Index 435
