Description
Book SynopsisThis issue of the Ceramic Engineering and Science Proceedings is one of nine issues published based on content presented in January 2012, during the 36th International Conference on Advanced Ceramics and Composites (ICACC). It features papers from two popular symposia held during the ICACC meeting:
Next-Generation Bioceramics explores new research into ceramic materials designed to support and enhance the treatment of dental and medical disorders;
Porous Ceramics: Novel Developments and Applications examines some of the latest advances and innovations in processing methods and synthesis, and much more. Charts, tables, and illustrations are included throughout this issue.
Table of ContentsPreface ix
Introduction xi
BIOCERAMICS
Effect of Precursor Solubility on the Mechanical Strength of HAP Block 3
Nurazreena Ahmad, Kanji Tsuru, Melvin L. Munar, Shigeki Matsuya, and Kunio Ishikawa
Carbonate Apatite Formation during the Setting Reaction of Apatite Cement 7
Arief Cahyanto, Kanji Tsuru, and Kunio Ishikawa
In Vitro Evaluation of Silicate and Borate Bioactive Glass Scaffolds Prepared by Robocasting of Organic-Based Suspensions 11
Aylin M. Deliormanl and Mohamed N. Rahaman
Translucent Zirconia-Silica Glass Ceramics for Dental Crowns 21
Wei Xia, Cecilia Persson, Erik Unosson, Ingrid Ajaxon, Johanna Engstrand, Torbjörn Mellgren, and Hakan Engqvist
Using Microfocus X-Ray Computed Tomography to Evaluate Flaws in Ceramic Dental Crowns 29
Y. Zhang and J. C. Hanan
Residual Stress and Phase Transformation in Zirconia Restoration Ceramics 37
M. Allahkarami and J. C. Hanan
Heterogeneous Structure of Hydroxyapatite and In Vitro Degradability 49
Satoshi Hayakawa, Yuki Shirosaki and Akiyoshi Osaka, and Christian Jäger
Aspects of Antibacterial Properties of Nanostructural Calcium Aluminate Based Biomaterials 57
Leif Hermansson
Potential Toxicity of Bioactive Borate Glasses In-Vitro and In-Vivo 65
Steven B. Jung, Delbert E. Day, Roger F. Brown, and Linda F. Bonewald
Fabrication of Carbonate Apatite-PLGA Hybrid Foam Bone Substitute 75Girlie M. Munar, Melvin L. Munar, Kanji Tsuru, Shigeki Matsuya, and Kunio Ishikawa
UV-lrradiation Modifies Chemistry of Anatase Layer Associated with In Vitro Apatite Nucleation 79
Keita Uetsuki, Shinsuke Nakai, Yuki Shirosaki, Satoshi Hayakawa, and Akiyoshi Osaka
Preparation of Magnesium Containing Bioactive Ti02 Ceramic Layer on Titanium by Hydrothermal Treatment 85
Xingling Shi, Masaharu Nakagawa, Lingli Xu, and Alireza Valanezhad
Millimeter-Sized Granules of Brushite and Octacalcium Phosphate from Marble Granules 91
A. Cuneyt Tas
Microstructures and Physical Properties of Biomorphic SiSiC Ceramics Manufactured Via LSI-Technique 105
Steffen Weber, Raouf Jemmali, Dietmar Koch, and Heinz Voggenreiter
Biofluid Flow Simulation of Tissue Engineering Scaffolds with Dendrite Structures 117
Satoko Tasaki, Chiaki Maeda, and Soshu Kirihara
POROUS CERAMICS
Multifunctional Carbon Bonded Filters for Metal Melt Filtration 125
Christos G. Aneziris, Marcus Emmel, and Anja Stolle
Failure and Stiffness Analysis of Ceramic from a 25-mm Diameter Diesel Particulate Filter 139
Ethan E. Fox, Andrew A. Wereszczak, Michael J. Lance, and Mattison K. Ferber
Development of Porous SiC with Tailorable Properties 153
Prashant Karandikar, Glen Evans, Eric Klier, and Michael Aghajanian
Obtaining Porous Corundum Ceramics by Utilization of Waste Rice Husk—Investigation of Composition, Structure and Thermal Degradation of Rice Husk 163
Irena Markovska, Bogdan Bogdanov, Dimitar Georgiev, and Yancho Hristov
Processing, Microstructure and Properties of Reticulated Vitreous Carbon Foam Manufactured Via the Sponge Replication Technique 175
David Haack and Rudolph Olson III
Air-Atmosphere Sintering of Si3N4-Based Porous and Foamed Ceramics 187
Philip T. J. Gagnon, Amit K. Gandhi, and Kevin P. Plucknett
Comparison of Elastic Moduli of Porous Cordierite by Flexure and Dynamic Test Methods 197
R. J. Stafford, K. B. Golovin, A. Dickinson, T. R. Watkins, A. Shyam, and E. Lara-Curzio
Author Index 205
