Description

Book Synopsis

This issue contains 9 papers from The American Ceramic Society's 40th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 24-29, 2016. This issue includes papers presented in the 10th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems (Symposium 8), Additive Manufacturing and 3D Printing Technologies (Focused Session 4), and Field Assisted Sintering (Focused Session 5).



Table of Contents
Preface vii

Introduction ix

FIELD ASSISTED SINTERING

Flash Sintering of Alumina and Its Microstructural Evolution 3
Mattia Biesuz and Vincenzo M. Sglavo

Enhancements on FAST Sintering Systems Promote Transfer from the Lab to Industrial Applications 11
J. Hennicke, T. Kessel, and J. Raethel

Combining Flash Sintering/Sinterforging with Hybrid FAST/SPS Technology for Oxide and Non-Oxide Materials 21
J. Hennicke, T. Kessel, and J. Raethel

Low Temperature Fabrication of Transparent Magnesium Aluiminate Spinel by High Pressure Spark Plasma Sintering 27
M. Sokol, S. Kalabukhov, and N. Frage

ADVANCED PROCESSING AND MANUFACTURING

Defect Control of SiC Polycrystalline Fiber Aiming for Higher Strength 39
Toshihiro Ishikawa and Hiroshi Oda

TEM Analysis of Interfaces in Diffusion-Bonded Silicon Carbide Ceramics Joined Using Metallic Interlayers 49
T. Ozaki, Y. Hasegawa, H. Tsuda, S. Mori, M. C. Halbig, M. Singh, and R. Asthana

Micro-Computed Tomography Characterization of Isotropic Filler Distribution in Magnetorheological Elastomeric Composites 57
Sneha Samal, Jarmil Vlach, Marcela Kolinova, and Pavel Kavan

ADDITIVE MANUFACTURING

Development of Advanced Ceramic Fuel Cells Using Additive Manufacturing Technology (I): Design and Modeling 73
Yanhai Du, Aliaa Maar, and Kai Zhao

Rapid Manufacturing of Ceramic Parts 81
Wang Xiufeng, Wang Jia, Fan Xiaopu, Yu Chenglong, Jiang Hongtao, Yang Yang, Li Hui, Cao Xinqiang, and Zhang Juanjuan

ADVANCED MATERIALS AND INNOVATIVE PROCESSING IDEAS FOR THE INDUSTRIAL ROOT TECHNOLOGY

Nano Technology in Development of Functional Coatings 91
A.S. Khanna, Shalini Dolai, and Karanveer Aneja

Tailoring the Functional Properties of Niobium Carbide 101
Mathias Woydt, Hardy Mohrbacher, Jef Vleugels, and Shuigen Huang

Author Index 115

Advanced Processing and Manufacturing

    Product form

    £176.36

    Includes FREE delivery

    RRP £195.95 – you save £19.59 (9%)

    Order before 4pm tomorrow for delivery by Thu 2 Jul 2026.

    A Hardback by Tatsuki Ohji, Mrityunjay Singh, Michael Halbig

      Trusted by thousands of customers. See 2,385+ Customer Reviews

      View other formats and editions of Advanced Processing and Manufacturing by Tatsuki Ohji

      Publisher: John Wiley & Sons Inc
      Publication Date: 06/01/2017
      ISBN13: 9781119321705, 978-1119321705
      ISBN10: 1119321700
      Also in:
      Industrial chemistry and chemical engineering Nanotechnology

      Description

      Book Synopsis

      This issue contains 9 papers from The American Ceramic Society's 40th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 24-29, 2016. This issue includes papers presented in the 10th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems (Symposium 8), Additive Manufacturing and 3D Printing Technologies (Focused Session 4), and Field Assisted Sintering (Focused Session 5).



      Table of Contents
      Preface vii

      Introduction ix

      FIELD ASSISTED SINTERING

      Flash Sintering of Alumina and Its Microstructural Evolution 3
      Mattia Biesuz and Vincenzo M. Sglavo

      Enhancements on FAST Sintering Systems Promote Transfer from the Lab to Industrial Applications 11
      J. Hennicke, T. Kessel, and J. Raethel

      Combining Flash Sintering/Sinterforging with Hybrid FAST/SPS Technology for Oxide and Non-Oxide Materials 21
      J. Hennicke, T. Kessel, and J. Raethel

      Low Temperature Fabrication of Transparent Magnesium Aluiminate Spinel by High Pressure Spark Plasma Sintering 27
      M. Sokol, S. Kalabukhov, and N. Frage

      ADVANCED PROCESSING AND MANUFACTURING

      Defect Control of SiC Polycrystalline Fiber Aiming for Higher Strength 39
      Toshihiro Ishikawa and Hiroshi Oda

      TEM Analysis of Interfaces in Diffusion-Bonded Silicon Carbide Ceramics Joined Using Metallic Interlayers 49
      T. Ozaki, Y. Hasegawa, H. Tsuda, S. Mori, M. C. Halbig, M. Singh, and R. Asthana

      Micro-Computed Tomography Characterization of Isotropic Filler Distribution in Magnetorheological Elastomeric Composites 57
      Sneha Samal, Jarmil Vlach, Marcela Kolinova, and Pavel Kavan

      ADDITIVE MANUFACTURING

      Development of Advanced Ceramic Fuel Cells Using Additive Manufacturing Technology (I): Design and Modeling 73
      Yanhai Du, Aliaa Maar, and Kai Zhao

      Rapid Manufacturing of Ceramic Parts 81
      Wang Xiufeng, Wang Jia, Fan Xiaopu, Yu Chenglong, Jiang Hongtao, Yang Yang, Li Hui, Cao Xinqiang, and Zhang Juanjuan

      ADVANCED MATERIALS AND INNOVATIVE PROCESSING IDEAS FOR THE INDUSTRIAL ROOT TECHNOLOGY

      Nano Technology in Development of Functional Coatings 91
      A.S. Khanna, Shalini Dolai, and Karanveer Aneja

      Tailoring the Functional Properties of Niobium Carbide 101
      Mathias Woydt, Hardy Mohrbacher, Jef Vleugels, and Shuigen Huang

      Author Index 115

      Recently viewed products

      © 2026 Book Curl

        • American Express
        • Apple Pay
        • Diners Club
        • Discover
        • Google Pay
        • Maestro
        • Mastercard
        • PayPal
        • Shop Pay
        • Union Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account