Search results for """ "Standards in Architectural Paint Research""

Book SynopsisBased on research culled by Architectural Computer Services, Inc. (ARCOM), this book presents objective, in-depth specification information representing material from hundreds of standards and manufacturing organizations.Table of ContentsDIVISION 5: METALS. Metal Stairs. DIVISION 6: WOOD AND PLASTICS. Interior Architectural Woodwork. Paneling. DIVISION 8: DOORS AND WINDOWS. Steel Doors and Frames. Flush Wood Doors. Stile and Rail Wood Doors. Access Doors and Frames. Folding Doors. Door Hardware. DIVISION 9: FINISHES. Gypsum Plaster. Gypsum Vaneer Plaster. Portland Cement Plaster. Factory-Finished Gypsum Board. Gypsum Board Assemblies. Gypsum Board Shaft-Wall Assemblies. Glass-Reinforced Gypsum Fabrications. Ceramic Tile. Dimension Stone Tile. Terrazzo. Acoustical Panel Ceilings. Acoustical Tile Ceilings. Acoustical Snap-In Metal Pan Ceilings. Acoustical Metal Pan Ceilings. Linear Metal Ceilings. Security Ceiling Systems. Suspended Decorative Grids. Fluid-Applied Athletic Flooring. Resilient Athletic Flooring. Brick Flooring. Chemical-Resistant Brick Flooring. Stone Paving and Flooring. Wood Flooring. Wood Athletic-Flooring Assemblies. Resilient Floor Tile. Sheet Vinyl Floor Coverings. Resilient Wall Base and Accessories. Linoleum Floor Coverings. Static-Control Resilient Floor Coverings. Resinous Flooring. Carpet. Carpet Tile. Wall Coverings. Wood-Veneer Wall Coverings. Interior Stone Facing. Fabric-Wrapped Panels. Stretched-Fabric Wall Systems. Acoustical Wall Panels. Painting. Exterior Wood Stains. Multicolored Interior Coatings. High-Performance Coatings. Elastomeric Coatings. Intumescent Paints. High-Temperature-Resistant Coatings. Cementitious Coatings. Illustration Acknowledgements. Index.

Read more less

Book SynopsisThe 'Architect's Bible' since 1932, updated with the latest codes and standards Architectural Graphic Standards is the written authority for architects, designers, and building contractors. It provides comprehensive guidance on the visual representation of materials, products, systems, and assemblies.Table of ContentsA Note from the Publisher xiii A Note from the AIA xiv Architects’ Tributes to Architectural Graphic Standards xv Introduction xviii Section 1: Design Principles & Construction Documentation 1 Chapter 1 Functional Planning 3 Human Factors 4 Universal and Accessible Design 19 Chapter 2 Environment 73 Environmental Factors 74 Solar Path and Solar Angle 79 Climate Zone 86 Thermal Comfort 90 Daylighting 92 Acoustics 95 Chapter 3 Building Resiliency 107 Overview 108 Components of Building Resilience 109 Hazard-Specific Building-Resilience Considerations 113 Maintainability 114 Safety 115 Security 122 Security Planning and Design: Continuing Education 127 Sustainability 128 Good Practices in Resilience-Based Architectural Designs 130 Crime Prevention Through Environmental Design 136 Lifecycle Considerations in Resilience-Based Designs 139 Chapter Appendices 140 Chapter 4 Architectural Construction Documentation 141 Drawings 142 Construction Specifications 146 Building Information Modeling (BIM) 151 Procurement Documents 160 Section 2: Materials 161 Chapter 5 Concrete 163 Concrete Forming and Accessories 164 Concrete Reinforcing 170 Typical Components Applicable to Concrete Work 175 Chapter 6 Masonry 181 Typical Components Applicable to Masonry Work 182 Glass Unit Masonry 185 Stone Assemblies 187 Masonry Mortaring and Grouting 191 Masonry Anchorage, Reinforcing, and Accessories 194 Installation Guidelines and Construction Tolerances 199 Chapter 7 Metals 209 Common Characteristics, Standards, and Practices 210 Typical Metal Products Incorporated into Applicable Work Results 216 Decorative Metal 224 Installation Guidelines and Construction Tolerances 228 Chapter 8 Wood, Plastics, and Composites 233 Common Characteristics, Standards, and Practices 234 Wood Classification 236 Wood Treatment 236 Typical Wood, Plastic, and Composite Products Incorporated into Applicable Work Results 240 Installation Guidelines and Construction Tolerances 252 Chapter 9 Glass 259 Common Characteristics, Standards, and Practices 260 Section 3: Building Elements 271 Chapter 10 Element A: Substructure 273 Soils and Soils Explorations 274 Foundations 283 Cast-in-Place Concrete Slab 298 Crawl Space Construction 303 Basement Construction 304 Chapter 11 Element B: Shell 313 Design Considerations 314 Sustainability and Energy 320 Floor Assemblies 322 Roof Assemblies 326 Superstructure 329 Exterior Vertical Enclosures 387 Exterior Horizontal Enclosures 468 Chapter 12 Element C: Interiors 527 Interior Construction 528 Chapter 13 Element D: Services 641 Conveying 642 Other Conveying Equipment 655 Plumbing 659 Heating, Ventilating, and Air-Conditioning (HVAC) 691 Design Considerations 691 Heating/Cooling Source Components 699 HVAC Distribution Arrangements and Components 711 HVAC Delivery Components 722 HVAC Control Systems 725 Fire Protection 732 Electrical 744 Communications 767 Chapter 14 Element E: Equipment and Furnishings 779 Equipment 780 Furnishings 836 Chapter 15 Element F: Special Construction 877 Design Considerations of Integrated Construction 878 Building Modules 878 Manufactured—Fabricated Rooms 881 Special Structures 890 Manufactured Engineered Structures 893 Special Function Construction 898 Special Facilities Components 908 Athletic and Recreation Special Construction 919 Chapter 16 Element G: Sitework 923 Site Earthwork 924 Runoff Control Systems 925 Water Management 930 Basement Excavation 931 Site Grading 936 Site Improvements 938 Parking Lots 942 Porous Pavements 946 Pedestrian Paving 950 Exterior Stairs and Ramps 953 Athletic and Recreational Areas 955 Site Development 966 Landscaping 981 Selecting Plants for Rooftop Planting 991 Site Civil Utilities 993 Porous Paving Systems 995 Storm Drainage Grates 997 Manholes, Inlets, and Catch Basins 999 Site Electrical Utilities 1001 Appendices 1005 A Classical Architectural Elements 1007 B Mathematical Data 1019 C Structural Calculations 1025 Index 1029

Read more less

Book SynopsisThe residential construction market may have its ups and downs, but the need to keep your construction knowledge current never lets up. Now, with the latest edition of Architectural Graphic Standards for Residential Construction, you can keep your practice at the ready.Trade Review"Now, with the latest edition of Architectural Graphic Standards for Residential Construction, you can keep your practice ready." (ChicagoArchitectureToday.com, June 2010)Table of ContentsPUBLISHER'S NOTES. LETTER FROM THE AIA. INTRODUCTION: MANAGING BUILDING INFORMATION: THE EVOLUTION OF ARCHITECTURAL GRAPHIC STANDARDS FOR RESIDENTIAL CONSTRUCTION. SECTION 1: SPACES. CHAPTER 1: BASICS OF RESIDENTIAL DESIGN. General Guidelines. Residential Planning. Single-Family Detached Housing. Single-Family Attached Housing. Crime Prevention through Environmental Design. Site Planning for Fire Protection. Control of Flood Damage. Residential Site Planning. Resource Conservation. Daylighting. Seismic Design. Accessible Design. CHAPTER 2: HABITABLE SPACES. Sleeping Spaces. Kitchens. Living Rooms. Adjoining Spaces. CHAPTER 3: ANCILLARY AND UNINHABITABLE SPACES. Ancillary Spaces. Uninhabitable Spaces. CHAPTER 4: OUTDOOR SPACES. Garden Design. Patio Planning. Court and Lawn Games. Water Features. Docks and Launching Ramps. Dock Construction. SECTION 2: ELEMENTS. CHAPTER 5: STRUCTURE. Substructure. Superstructure. CHAPTER 6: SHELL. Exterior Vertical Enclosures. Exterior Horizontal Enclosures. CHAPTER 7: INTERIORS. Interior Construction. Interior Finishes. CHAPTER 8: SERVICES. Conveying. Plumbing. Heating, Ventilation, and Air Conditioning (HVAC). Electrical. CHAPTER 9: EQUIPMENT AND FURNISHINGS. Equipment. Furnishings. CHAPTER 10: SITEWORK. Site Preparation. Site Improvements. Site Utilities. SECTION 3: MATERIALS. CHAPTER 11: CONCRETE. Concrete Forming and Accessories. Concrete Reinforcing. Cast-in-Place Concrete. CHAPTER 12: MASONRY. Masonry Mortaring and Grouting. Masonry Anchorage, Reinforcing, and Accessories. Unit Masonry. Concrete Unit Masonry. Glass Unit Masonry. Stone Assemblies. CHAPTER 13: METALS. Metal Materials. Structural Metal Framing. Decorative Metal. Perforated Metal. CHAPTER 14: WOOD. Types of Wood Construction. Wood Treatment. Fastenings. Panel Products and Wood Veneers. CHAPTER 15: GLASS. Basic Types of Glass. Locations for Safety Glazing. SECTION 4: CONTEMPORARY ISSUES IN RESIDENTIAL CONSTRUCTION. CHAPTER 16: AGING IN PLACE. Design Strategies. Determining Needs. Simple Fixes. Conclusions. Resources. CHAPTER 17: BUILDING INFORMATION MODELING (BIM) FOR RESIDENTIAL CONSTRUCTION. Precursors to BIM in Residential Design. BIM versus CAD. Object Intelligence versus Lines. BIM Communication and Coordination. Simulation, Calculation, and Analysis with BIM. Standard Methods—the "I" in BIM. CHAPTER 18: SUSTAINABLE RATING SYSTEMS FOR HOMES. Rating Systems and Tools. Sustainability in Remodeling Existing Homes. Conclusions. CHAPTER 19: EMERGING TRENDS IN RESIDENTIAL DESIGN AND CONSTRUCTION. AIA Home Design Trends Survey. Related Trends. Residential Construction Trends. Conclusions. CHAPTER 20: PROJECT DELIVERY. Project Scope. The Parties. Project Stages/Phases. Project Delivery Methods. Designer Considerations. Construction Contracts. Conclusions. SECTION 5: SAMPLE RESIDENTIAL PROJECT. CHAPTER 21: MOUNTAIN CABIN: STERLING, NC. Standard Form of Agreement between the Owner and the Architect. Drawings. Project Manual. Standard Form of Agreement between the Owner and the Contractor. Application and Certificate for Payment and Continuation Sheet. Change Order. Certificate of Substantial Completion. APPENDICES. A Graphic Symbols. B Classical Architectural Elements. C Mathematical Data. D Structural Calculations. INDEX.

Read more less

Book SynopsisThe new student edition of the definitive reference on architectural interiors Interior Graphic Standards, Student Edition is a carefully edited treatment of the authoritative Interior Graphic Standards Professional Edition. Designed and organized to give students the specific information they require, this is an essential reference for anyone studying architectural interiors. New topics include accessible design basics, computing technologies, fire-resistive construction, fire protection systems, security and communications systems, interior equipment, evidence-based design, and climate considerations. In addition, this second Student Edition offers more material on residential design, is packed with more than 1,300 informative illustrations, and includes the latest coverage for students to find real help understanding the critical material they need for the core classes required by all curriculums. Additional revisions to this edition Table of ContentsPREFACE xi SECTION 1 DESIGN PRINCIPLES AND PROCESS 1 CHAPTER 1 ENVIRONMENTAL AND BEHAVIORAL ISSUES Human Factors 3 Anthropometrics and Ergonomics 3 Human Behavior 10 Wayfinding 11 Mapping 11 Wayfinding and Age 11 Signage and Wayfinding Clues 12 CHAPTER 2 ACOUSTICAL PRINCIPLES Basics of Acoustical Design 13 Sound 13 Frequency 13 Sound Absorption Properties of Materials 13 Room Acoustics 14 Properties of Sound 14 Use of Sound-Absorptive Materials 14 Sound Transmission 15 Transmission Loss 15 Noise Reduction 15 Sound Isolation 15 Impact Noise Reduction 15 Sound Control 17 CHAPTER 3 ACCESSIBLE DESIGN BASICS Accessibility 18 Definitions 18 Accessibility Standards Terms 18 ADA and FHAA Design Requirements 18 Knee and Toe Clearances 19 Reach Limits 20 Protruding Objects 21 Accessible Routes 22 Components of Accessible Routes 22 Location of Accessible Routes 22 Floor and Ground Surfaces 22 CHAPTER 4 SUSTAINABLE DESIGN BASICS Sustainable Design Principles 24 Depletion of Natural Resources 24 Climate Change 24 Principles 25 Design Considerations 25 Sustainability Strategies 25 Energy 25 Lighting and Daylight 25 Water 25 Sustainable Materials 25 Indoor Air Quality 26 Environmental Quality Terms 26 Sick Building Syndrome 26 Personal Control 26 Interior Rating Systems and Certifications 27 U.S. Green Building Council 27 LEED Rating System 27 CHAPTER 5 DESIGN BASICS Evidence-Based Design 29 Computational Research 29 Social Science Research 29 Physical and Natural Science Research 29 Building Codes 29 Codes and Regulations Affecting Interiors 29 International Building Code Provisions 30 Programming 33 Programming Process 33 Contract Documents 34 Contract Documents for Commercial Interiors 34 Furniture, Furnishings, and Equipment Contracts 34 Detailing Concepts 35 Construction Specifications 37 Computing Technologies 38 Computer-Aided Design and Building Information Modeling 38 Integrated Project Delivery 38 Virtual Collaboration 38 Future Developments 39 Digital Fabrication 39 SECTION 2 BUILDING ELEMENTS 41 CHAPTER 6 BUILDING STRUCTURE AND SHELL Substructure 43 Wall Foundations 43 Subgrade Enclosures 43 Slabs on Grade 44 Superstructure 45 Seismic Considerations 45 Superstructure Framing 46 Floor Construction Assemblies 57 Wood Floor Framing 57 Steel Joist Floor Framing 59 Floor Decks and Slabs 60 Roof Construction 62 Roof Types and Framing 62 Shop-Fabricated Wood Trusses 63 Glue-Laminated Construction 64 Roof Decks, and Slabs 65 Attic Ventilation 66 Stairs and Ramps 66 Stairs 66 Handrails, Balustrades, and Guards 69 Ramps 78 Exterior Vertical Enclosures 79 Exterior Wall Weather Barriers 79 Exterior Enclosure Walls 80 Roof Windows and Skylights 87 CHAPTER 7 INTERIOR CONSTRUCTION Fire Resistive Construction 89 Fire-Retardant Wood Treatment 89 Fire-Resistance-Rated Assemblies 89 Fire-Resistance-Rated Openings 91 Board Fire Protection 93 Penetration Firestop Systems 93 Seismic Considerations 93 Basic Seismic Design 93 Seismic Detailing for Designers 94 Interior Construction Components 95 Gypsum Board Assemblies 95 Concrete Masonry Units 114 Architectural Concrete 116 Stone Walls 117 Glass Unit Masonry 118 Prefabricated Partitions 120 Windows and Glazing 125 Interior Doors 131 Entrances and Vestibules 148 Raised Floor Construction 148 Thermal and Moisture Protection 149 Interior Finishes 150 Interior Specialties 150 Wall Finish Requirements 162 Integral Wall Finishes 163 Wood Wall Finishes 166 Tile Wall Finishes 175 Metal Wall Finishes 181 Wall Surface Coverings 183 Paints and Coatings 188 Floor Design Considerations 190 Hard Flooring 191 Wood Flooring 198 Resilient Flooring 201 Resilient Flooring Installation 204 Carpet, Carpet Tile, and Mats 205 Ceilings 213 Building Services 223 Conveying Systems 223 Plumbing Systems 231 Mechanical Systems 247 Fire Protection Systems 254 Electrical Systems 259 Lighting 265 Communications Systems 272 Security Systems 280 CHAPTER 8 EQUIPMENT AND FURNISHINGS Equipment 283 Toilet and Bath Equipment 283 Vending Equipment 285 Personal Care Equipment 286 Laundry Facilities 288 Teller and Service Equipment 290 Cleaning and Recycling Equipment 292 Furnishings 292 Furnishing Contracts and Tests 292 Textiles for Interior Furnishings 294 Cabinetry and Casework 299 Countertops 306 Art and Accessories 313 Furniture 315 Plantings 318 Window Treatments 321 CHAPTER 9 INTERIOR PROJECT TYPES Commercial Spaces 326 Offices 326 Conference Rooms 343 Residential Spaces 349 Kitchens 349 Furnishings and Equipment 354 Residential Lighting 357 Visitability 358 Aging in Place 359 Continuing Care Retirement Communities 365 Healthcare Facilities 369 Inpatient Hospitals 369 Ancillary Departments 372 Healthcare Casework 379 Healthcare Furniture 381 Retail Spaces 382 Types of Retail Spaces 382 Fixture Placement 382 Retail Equipment 383 Retail Lighting 383 Hospitality Spaces 384 Hotels 384 Restaurants 390 Educational Facilities 402 Early Childhood and Kindergarten 402 Elementary, Middle, and Junior High Schools 404 High Schools 405 Lecture Halls and Auditoriums 410 Libraries 413 Performance Spaces 419 Planning Criteria 419 Performance Equipment 421 Museums 421 Museum Design Considerations 421 Museum Exhibit Casework 421 Museum Lighting 423 Museum Security 425 Athletic and Fitness Spaces 425 Courts, Alleys, and Rinks 425 Gymnastics 426 Table Sports and Darts 427 Fitness Spaces 428 Saunas and Steam Rooms 430 Animal Care Facilities 431 General Design Concept 431 Animal Housing 431 Adoption Facility 434 Existing Building Interiors 435 Historic Preservation, Restoration, and Adaptive Reuse 435 Existing Hazardous Materials 436 Recycling Construction and Demolition Waste 438 APPENDIX Classical Interior Architectural Elements 439 GLOSSARY 449 INDEX 455

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

Book SynopsisLandscape Architectural Graphic Standards, Student Edition is an abridged version of Landscape Architectural Graphic Standards. This book focuses on the practical skill set required of graduates of landscape architecture programs entering the workforce.Table of ContentsPreface. Acknowledgments. PART I: PRACTICE OF LANDSCAPE ARCHITECTURE. General. Overview of Profession. Construction Documentation. Overview of Construction Documentation. Project Manual. Construction Drawing Layout. Drawing Symbols. Landscape Surveys. Landscape Planning. Computer-Aided Design. GIS. Environmental and Legal. Environmental Review. Legal - Permits and Regulations. Project Administration. Project Management. Business Administration (Records, Legal, Liability). Cost Estimating. Bidding. Construction Administration. Maintenance, Compost, Site Occupation, and Post Occ surveys,. PART II: STANDARDS AND GUIDELINES. Human Factors. Human Dimensions. Human Nature and Spatial Relationships. Community Participation. Environmental Factors. Modifying Solar Radiation. Modifying Wind. Regional Climate. Modifying Microclimates. Modifying Air Quality. Brownfields Evaluation. Environmental Hazards. Wetlands Evaluation. Resource Inventory and Conservation. Sustainable Site Design. Cultural Factors. Historic Landscape. Security Considerations. Crime Prevention through Environmental Design. Site Security Design. Site Planning. Environmental Site Analysis. The Town Planning Process. Rural Village Design. Elements of Urbanism. Plan Types. Block Types. Open Space Types. Building Types. Spatial Definition. Frontage Types. Landscape Types. Traditional Neighborhood Design. Site Planning for Fire Protection. Residential Site Planning. Residential Density. Single-Family Detached Housing. Single-Family Attached Housing. Context Sensitive Solutions. Transit Oriented Development. Circulation. Vehicular Circulation . Parking Standards . Parking Lot Design Guidelines. Parking Space Dimensions. Parking Lot Design. Accessible Parking. Bicycle Circulation. Recreational Trails and Shared-Use Paths. Accessibility. Introduction to Accessible Design: Codes, Laws, and Regulations. Reach Ranges for Accessibility. Protruding Objects in Circulation Paths. Accessible Routes and Walking Surfaces. Accessible Curb Ramps and Passenger Loading. Access to the Outdoor Setting. PART III: PROCESS, IMPLEMENTATION AND APPLICATION. Construction Operations, Earthwork, and Road Alignment. Site Construction Overview. Soil Mechanics. Embankment Stabilization. Site Grading and Earthwork. Cut and Fill Calculations. Road Alignment. Water Supply and Management. Subsurface Drainage Systems. Surface Drainage Systems. Manholes, Inlets, and Catch Basins. Runoff Control Systems. Wetland Preservation. Waste Water Management - grey water-harvest/treatment. Constructed Treatment Wetlands. Storm Water Management. Site Design for Stormwater Management. Stormwater Hydrology. Stormwater Conveyance. Stormwater Quantity Control. Stormwater Quality Control. Rainwater Harvesting. Stream Restoration. Irrigation and Water Features. Irrigation. Water Features, Pools and Fountains. Fountain Examples. Fountains and Decorative Pools. Garden Structures. Pavement and Structures in the Landscape. Pavement in the Landscape. Unit Pavers. Concrete Pavement. Asphaltic Concrete Pavement. Porous Pavement. Stairs, Ramps and Curbs. Freestanding and Retaining Walls. Fences and Screens. Gazebos and Freestanding Wood Structures. Overhead Structures. Wood Decks. Wood Decking. Wood Decks: Walkways and Stairs. Timber Bridges. Site Amenities. Site Furnishings. Flags and Flagpoles. Lighting. Planting. Soils: Urban and Disturbed. Public Planting Design Principles. Residential Landscape Design Principles. Environmental Effects of Trees. Site Considerations, Plant Installation Requirements, and Details. Tree Planting in Urban Areas. Recommended Ornamental and Shade Trees for Use in Landscape Design in the Continental U.S. Native Species: Upper Midwest. Native Plants. Xeriscape Design. Construction Damage to Existing Trees On-Site: Avoidance, Protection, and Preservation. Plant Mechanics. Interior Plants. Turf. Living Green Roofs and Landscapes Over Structure. Special Construction. Plaza Membrane Waterproofing Over Occupied Space. Therapeutic Gardens. Wildlife Habitat. Campuses. Hazard Control. Soil Erosion and Sediment Control. Restoration/Remediation. Ecological Community Restoration. Brownfields Remediation and Development. Sound Control and Reduction. Parks and Recreation. Large City Parks. Small Urban Parks. Waterfronts. Outdoor Play Areas. Recreation Facilities. Major League Baseball. Little League Baseball and Softball. NFL and CFL Football. NCAA and Touch Football. Multipurpose High School Stadium and Football Field. Professional Soccer. NCAA and High School Soccer. Bocce, Field Hockey, Lacrosse, Rugby, and Team Handball. Backstop, Basketball Goal, and Net Construction. Track and Field Events. Track and Field Construction Details. Tennis Courts. Basketball. Golf Course Design: Planning and Details. Waste Management. Solid Waste Collection and Recycling Spaces. PART IV: MATERIALS. Soils. Soils - Agronomic. Asphalt. Asphalt. Concrete. Concrete. Environmental and Health Considerations of Concrete. Masonry. Brick Masonry. Concrete Masonry Units. Metals. Metal. Structural Welds. Gratings. Ornamental Ironwork Details. Perforated Metals. Perforated Sheet Metals. Wood. Wood and Related Products. Wood Preservatives. Recreational Surfaces. Recreational Surfaces. Nursery Stock. Nursery Stock Standards and Practices, Shipping and Handling, Guarantees. Other Materials. Building Systems: Tension Fabric Structures. Architectural Fabric Structures. Architectural Fabric Structures Details. Glass Block: Design Data. Glass Block Details. Greenhouses. Geotextiles. Paints and Coatings. Paints and Coatings: Substrate Conditions. Special Coatings. Evaluating the Environmental and Human Health Impacts of Materials. APPENDIX. Drawing Methods and Geometry. Plane and Solid Geometry. Triangular and Circular Geometry. Trigonomic Tables. Ellipse Construction. Area and Volume of Irregular Features. Metric System. Use of the Metric System. ASLA Declaration on the Environment and Sustainability. Environmental Sustainability (B205, 206, R2001). Index.

Read more less

Book SynopsisARCHITECTURAL RESEARCH METHODS ARCHITECTURE/GENERAL A PRACTICAL GUIDE TO RESEARCH FOR ARCHITECTS AND DESIGNERSNOW UPDATED AND EXPANDED! From searching for the best glass to prevent glare to determining how clients might react to the color choice for restaurant walls, research is a crucial tool that architects must master in order to effectively address the technical, aesthetic, and behavioral issues that arise in their work. This book's unique coverage of research methods is specifically targeted to help professional designers and researchers better conduct and understand research. Part I explores basic research issues and concepts, and includes chapters on relating theory to method and design to research. Part II gives a comprehensive treatment of specific strategies for investigating built forms. In all, the book covers seven types of research, including historical, qualitative, correlational, experimental, simulation, logical argumentation, and caseTable of ContentsAcknowledgments vii Part I The Domain Of Architectural Research 1 Chapter 1 The Scope of This Book 3 Linda Groat Chapter 2 Does Design Equal Research? 21 Linda Groat and David Wang Chapter 3 Systems of Inquiry and Standards of Research Quality 63 Linda Groat Chapter 4 What’s Your Purpose? From Theory Building to Design Application 101 David Wang and Linda Groat Chapter 5 What’s Your Question? Literature Review and Research Design 141 David Wang and Linda Groat Part II Seven Research Strategies 171 Chapter 6 Historical Research 173 David Wang Chapter 7 Qualitative Research 215 Linda Groat Chapter 8 Correlational Research 263 Linda Groat Chapter 9 Experimental and Quasi-Experimental Research 313 Linda Groat Chapter 10 Simulation Research 349 David Wang Chapter 11 Logical Argumentation 379 David Wang Chapter 12 Case Studies and Combined Strategies 415 Linda Groat Author Index 453 Subject Index 461

Read more less

Book SynopsisA definitive user''s guide to the U.S. National CAD Standard The Architect''s Guide to the U.S. National CAD Standard helps make the National CAD Standard (NCS) more accessible to architects by presenting: * Clear and succinct explanations of concepts and options in the NCS * A step-by-step approach to seamlessly implement standardized drawings in any size firm * Successful strategies design firms can use to best take advantage of the NCS requirements The Architect''s Guide to the U.S. National CAD Standard presents an informative overview of the NCS, including illustrations and frequently asked questions. It shows architects how to minimize immediate costs and downtime, how to reap immediate benefits, and how best to learn the system at an individualized pace. Used side by side with the Standard, this authoritative guide offers helpful insight into how the NCS is likely to be interpreted and presents a variety of available options forTable of ContentsAbout This Book xi Acknowledgments xiii Introduction 1 1 Drawing Set Organization 13 2 Sheet Organization 25 3 Schedules 45 4 Drafting Conventions 63 5 Terms and Abbreviations 71 6 Symbols 81 7 Notations 89 8 Code Conventions 115 9 AIA CAD Layer Guidelines 127 10 Plotting Guidelines 137 11 Implementation 147 Appendix A: List of Sheets: Example for Level 1 Discipline Designators 159 Appendix B: List of Sheets: Example for Level 2 Discipline Designators 165 Appendix C: Sheet Keynote Office Master: Example for Architectural Sheets 171 Appendix D: Reference Keynote Office Master: Example for Architectural Sheets 173 Appendix E: Sample CAD Layer Names for Architectural Sheets 215 Appendix F: Supplement to AIA Document G612-2001: Owner’s Instructions to the Architect for Construction Drawing Standards–Part D 217 Glossary 223 Bibliography 237 Index 239

Read more less

Book SynopsisThe reissue of a design classic--the book that revolutionized the practice of architecture. When it was published in 1932, this cornerstone edition of Ramsey and Sleeper's Architectural Graphic Standards was the very first book to present the accepted architectural practices of the time in a clear and accessible graphic form.Table of ContentsPartial table of contents: Orientation. Retaining Walls. Exterior Steps. Slate Roofing. Clay Tile Roofing. Zinc Roofing. Floor Construction. Aerocrete, Floor Construction. Balloon Framing. Braced Framing. Stairs. Wood Stairs. Disappearing Stairs. Enclosures and Stalls. Marble Stalls. Bathroom Accessories. Hardware. Door Hardware Requirements. Swimming Pools. Spring Boards. Library Equipment. Kitchen Equipment, etc., Hotels. Schools. Lettering. Flags and Poles.

Read more less

Book SynopsisPublisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product.BUILDING A NEW TRADITION Bundled CD-ROM with additional, still-current chapters from the Seventh Edition More graphic illustrations, figures, tables and summaries Latest on building envelope design and diagnostics Updated data on universaTable of ContentsPrefaceAbout the EditorsIntroductionPart A. Substructure: Foundations and Basement ConstructionPart B. Shell: Superstructure, Exterior Closure, RoofingPart C. Interiors: Interior Constructions, Staircases, DimensionsPart D. Services: Conveying Systems, Plumbing, HVAC systems, Fire Protection, Electrical systemsPart E. AppendicesCD-ROM table of contentsIndex

Read more less

Book SynopsisMain research skills.- Preparatory phase of research.- Classification of research methodologies.- Research methods in architecture.- Visual tools in research presentation.- Main rules of academic writing.- General conclusions.

Read more less

Book SynopsisSUPERB EXECUTION RELIES UPON RIGOROUS PROJECT DOCUMENTATION A project will only be built as well as it is documented. This publication focuses on the key documentation needs of the landscape architectural design and construction documentation process.Table of ContentsAcknowledgments V Section One: Establishing the Foundation 1 1 Introduction 3 2 Documentation Principles 10 3 Operational Principles 18 Section Two: Phases Overview 29 4 Pre Design—Establishing the Parameters 30 5 Concept Design—Developing the Framework 34 6 Schematic Design—Establishing Intent 36 7 Design Development—Design Solutions 40 8 Construction Documentation—The Implementation Contract 55 Section Three: Guidelines and Best Practices 65 9 Key Documentation Practices 66 10 Preliminary Design 93 11 Design Development and Construction Documents 202 Index 413

Read more less

Book SynopsisPublisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality,  authenticity, or access to any online entitlements included with the product.The "Silver Bible" -- thoroughly revised, updated and redesignedInterior designers, architects, and other design professionals can still turn to the fieldâs beloved "Silver Bible" for a wealth of information related to the design and planning of residential and commercial interiors. But now, Time-Saver Standards for Interior Design and Space Planning, Second Edition goes even further to truly make the classic interior design reference the standard in its field.From standard furniture dimensions to architectural woodwork details, youâll find a vast array of time-saving data and details. Editors Joseph DeChiara, Julius Panero, and Martin Zelnik have brought together contributions from well-known architectural and interior design firms to give yoTable of ContentsChapter 1: Planning and Design of Interior Spaces. Chapter 2: Construction Details and Finishes. Chapter 3: Architectural Woodwork. Chapter 4: Specialties. Chapter 5: Accessible Design/ADA. Chapter 6: General Reference Data.

Read more less

Book SynopsisAuthored by The American Institute of Architects (AIA), this guide is the updated architecture profession's standard on practice issues. This indispensable resource covers all aspects of architectural practice, including legal, financial, marketing, management, and administrative issues.Table of ContentsForeword vii Preface ix Acknowledgments xi About the 15th Edition of the Handbook xv PART 1 THE PROFESSION 1 1 Ethics and Professional Practice 2 1.1 The AIA Code of Ethics and Professional Conduct 2 1.2 Ethics and Architectural Practice 13 1.3 Design Beyond Ethics 19 2 Diversity and Demographics 27 2.1 Diversity and Practice Management 27 2.2 Demographics of Practice: 2012 AIA Firm Survey 36 3 Career Development 52 3.1 Regulation of Professional Practice 52 3.2 Intern Development 68 3.3 The Career Paths of an Architect 82 3.4 AIA Continuing Education System 93 3.5 Participating in Professional Organizations 99 3.6 Participating in Architectural Education 113 4 Public Interest Design 117 4.1 Socially Responsible Design Overview 117 4.2 The Role of Architects in Disaster Response and Recovery 131 4.3 Architects in the Nonprofi t Sector 147 4.4 Public Service and Community Involvement 156 PART 2 FIRM MANAGEMENT 167 5 Organizational Development 168 5.1 Architects and the Law 168 5.2 Entrepreneurial Practice: Starting an Architecture Firm 185 5.3 Strategic Planning for the Design Firm 203 5.4 Firm Growth and Development: How to Build a Creative Culture 216 5.5 Leader Effectiveness 227 5.6 Ownership Transitions 237 5.7 Small-Firm Collaboration 252 5.8 Practicing in a Global Market 262 5.9 Developing and Managing Multiple-Office Firms 275 5.10 Offi ce Administration 291 5.11 Knowledge Management 308 5.12 Information Management and Services 321 6 Marketing and Business Development 332 6.1 Marketing Architectural Services 332 6.2 Developing Marketing Strategy 342 6.3 Public Relations and Communications 355 6.4 Networking and Business Development 370 6.5 Qualifi cations, Proposals, and Interviews 381 7 Financial Management 396 7.1 Navigating Economic Cycles 396 7.2 Financial Management Overview 409 7.3 Financial Management Systems 418 7.4 Developing Annual Budgets and Profit Planning 428 8 Human Resources 444 8.1 Human Resources Management Overview 444 8.2 Compensation Strategy and Philosophy 461 8.3 Recruiting and Hiring: Strategies and Methodology 475 8.4 Professional Development and Mentoring 487 PART 3 PROJECT DELIVERY 507 9 Design Project Delivery 508 9.1 Project Delivery Methods 508 9.2 The Architect’s Role in Construction Manager-Constructor Project Delivery 520 9.3 Integrated Project Delivery Overview 530 9.4 Contractor-Led Design-Build 541 9.5 Architect-Led Design-Build 555 9.6 Architect Developer 563 9.7 Emerging Issues in Project Delivery 577 10 Design Project Management 584 10.1 Managing Architectural Projects 584 10.2 Project Teams 603 10.3 Project Budgets, Work Planning, and Monitoring 621 10.4 Project Management with Building Information Modeling Processes 641 10.5 Design Phases 654 10.6 Construction Drawings 668 10.7 Construction Specifi cations 689 10.8 Bidding and Negotiation 701 10.9 Construction Phase Services 713 10.10 Project Completion and Post-Construction 729 11 Technology in Practice 740 11.1 Technology in Practice Overview 740 11.2 Technology in Project Delivery Phases 754 11.3 Small Firms, Small Projects, and Building Information Modeling 764 11.4 Collaborative Technologies 780 11.5 Technology Management 785 11.6 Emerging Technology in Practice 798 12 Quality Management 810 12.1 Origins and Development of Quality Management 810 12.2 Quality Management in Schematic Design 822 12.3 Checklists 833 12.4 Quality Management in Construction Procurement, Contract Administration, and Post-Construction 847 13 Building Codes, Standards, and Regulations 857 13.1 Building Codes and Standards 857 13.2 Planning, Urban Design, and the Regulatory Environment 880 14 Research in Practice 899 14.1 Research in Practice Overview 899 14.2 Research Methods 911 14.3 Research and Practice 920 14.4 Evidence-Based Design 937 PART 4 CONTRACTS AND AGREEMENTS 951 15 Project Definition 952 15.1 Defi ning Project Services 952 15.2 Services and Compensation 961 15.3 Negotiating Agreement 975 16 Risk Management 989 16.1 Risk Management Strategies 989 16.2 Insurance Coverage for Business and Professional Liability 1007 16.3 Risks and Emerging Practices 1021 16.4 Dispute Management and Resolution 1030 17 Agreements and AIA Document Program 1040 17.1 Agreements with Owners 1040 17.2 Project Team Agreements 1055 17.3 Owner-Generated Agreements 1070 17.4 Construction Contracts 1083 17.5 The AIA Documents Program 1093 Appendix A: Allied Professional Organizations 1113 Appendix B: Glossary 1117 Index 1141 About the Companion Website 1166

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

Book SynopsisThis practical, hands on introduction guides you through the basics of undertaking research in day-to-day architectural practice helping you to exploit the growing opportunities on offer. It explores how developing a research specialism can improve the quality of your projects, help to define your brand and generate new channels of revenue with innovative services for clients. The text is divided into four sections focussing on different types of Architecture Research Practice; commercial, cultural, social and technology. Each section includes a series of inspiring case studies written by practitioners themselves on the way in which research benefits their business as well as an essay by an expert which sets these projects in their methodological context. In this way the book highlights the broad spectrum of research being undertaken and the practical implications for the practice and their projects. This is designed for architects and practices who want to develop a clear specialism that adds brand value and will enable them to access new funding streams as well as students of architecture who are getting to grips with architectural research. This book will inspire cutting edge and innovative architectural practice that can clearly demonstrate its impact and value to non-architect clients.Table of ContentsForeword Preface Introduction Part 1: Social Architecture Research Practice Chapter 1: Visioning – John Sampson, Urbed Chapter 2: Neighbourhood retrofitting – Irena Bauman, Bauman Lyons Chapter 4: Co-design for new lifestyles – Jane Burnside, Jane D Burnside Architects Chapter 5: Collective Architecture – Jude Barber, Collective Architecture Chapter 6: Specific Strategies in Practice – Richard Cottrell, Cottrell and Vermeulen Chapter 7: Methods in social architecture research practice, Julia Udall Part 2: Technology Chapter 8: Angela Carter Close – Anne Thorne, Cartwright Pickard Chapter 9: Information systems for sustainable design – Merritt Bucholz, Bucholz McEvoy Chapter 10: Lime and Materials –-Ian Standen, Stride Treglown Chapter 11: Sustainable building materials for commercial projects – Chris Halligan, Steven George and Partners Chapter 12: Sandal Magna School – Sarah Wigglesworth, Architects Chapter 13: Methods progressing technology, Fionn Stevenson Part 3: Commercial practice Chapter 14: Procurement – Walter Menteth, Walter Menteth Architects Chapter 15: Marketing architecture – Paul Iddon, Kernel Sympatico Chapter 16: Working as an expert witness – Gordon Gibb, Gibb Architects Chapter 17: Commercial methods – Peter Oborn and Anne Dye Part 4: Cultural Chapter 18: Sculpture and architecture in the modern city – Patrick Lynch, Lynch Architects Chapter 19: Performance and art – Helen Stratford, Mole architects Chapter 20: Pop-up buildings in the city – Tony Broomhead, Broomheads Homemade Chapter 21: Responding to the Welsh landscape at Stormy Castle – Dan Benham, Loyn & Co. Chapter 22: Neo-Vernacular Housing - Gillian Horne, Penoyre and Prasad Chapter 23: Cultural methods – Steven Walker Conclusion Useful resources Bibliography

Read more less

Book SynopsisTable of ContentsPreface xiii About The Companion Website xv Part I Professional Foundations 1 Chapter 1 Professional Foundations 3 Introduction 4 The Physical Office 5 Office Structure 5 Resource Library 7 Design Process Introduction 9 Building Code Requirements 15 Regional Considerations 18 Americans with Disabilities Act (ADA) 22 Chapter 2 Standards and Techniques 35 Office Standards 36 Freehand and Hand Drafting 36 The Dimensional Reference System 72 Specifications 73 Building Materials and Methods 75 Building Information Modeling (BIM) 87 Floor Plan 92 Abbreviations 97 Chapter 3 Sustainable Architecture 111 Sustainable Architecture 112 Other Sources of Impact 120 Mold 123 Energy Sources 124 Chapter 4 Preparation Phase for Construction Documents 132 Phases of Architecture 133 Project Programming 135 Guidelines for Construction Documents 136 From SD, DD, to cd 137 Selecting the Primary Structural System 138 Requirements of Consultants 138 Interrelationship of Drawings 140 Project Book 142 Architect/Client Relationship 158 Part II Document Evolution 167 Chapter 5 Site Analysis and Site Documents 169 Introduction 170 Site Analysis Defined 170 Site Analysis Applied 172 Soils and Geology Map 176 Site Plan/Plot Plan 176 Grading Plan 182 Site and Grading Plan 185 Drainage Plan 191 Erosion and Sediment Control Plans 194 The Utility Plan 194 Circulation Plan 194 Landscape, Irrigation, and Drainage Plans 195 Chapter 6 Floor Plan 204 Floor Plans 205 Types of Floor Plans 206 Symbols 217 Other Floor Plan Considerations 224 Drawing a Floor Plan with a Computer 228 Case Studies: Working Drawing Development 237 Chapter 7 Roof Plans 261 Roof Plans 262 Roof Plans Exercises 262 Odd Geometry Roof Design 268 Computer Drawn Roof Plans 271 Drawing a BIM Roof Plan 272 Chapter 8 Building Sections 273 Building Sections 274 Drafting a Building Section 278 Types of Building Sections 279 Sample Design and Detailed Building Sections 285 Materials and Building Sections 290 Chapter 9 Exterior and Interior Elevations 300 Purpose of Exterior Elevations 301 Material Designations 310 Drafting an Exterior Elevation 318 Weatherproofing 320 Drawing an Elevation with and without a Model 322 Case Studies: Working Drawing Development 324 Interior Elevations Purpose 330 Dimensions and Intersections 339 Drafting an Interior Elevation: Examples 340 Computers and Interior Elevations 342 Case Studies for Interior Development 347 Chapter 10 Schedules: Door, Windows, Finish, and Others 353 Schedules 354 Interior Finish Schedules 357 CAD and BIM Generated Schedules 360 Other Schedules 363 Chapter 11 Foundation, Floor, and Roof Framing Systems 369 Foundation 370 Types of Foundations 370 Examples 378 Summary of Typical Conventions for Foundation Plans 384 Exterior and Interior Walls 387 A Steel Structure 388 Case Studies for Development 391 Framing Systems 401 Wood Floor Systems 404 Wood Wall Systems 410 Wood Roof Systems 415 Conventions 422 Chapter 12 Architectural Details and Vertical Links (Stairs/Elevators) 436 Architectural Details 437 Freehand Detail Sketches 437 Detail Development 442 Architectural and Structural Details 443 Stairs and Other Vertical Links 450 Sample Drawings of Details 468 Part III Application of Working Drawings in Practice 473 Chapter 13 Additions/Alterations, Historical Preservation (Restoration), and Tenant Improvements (TI) 475 Architectural Additions and Alterations 476 Historic Preservation (Restoration) 477 Tenant Improvement 480 Sample—Madison-B Building 481 Development of the Keim Building 483 Working Drawing Stages 494 Chapter 14 One-Story Conventional Wood-Framed Structures 506 Program and Site Analisis 507 Schematic Design 507 Design Development 513 Construction Documents 514 Chapter 15 Construction Documents for a Two-Story, Wood-Framed Residence with BIM 526 Program and Site Analysis 527 CD, DD, and CD Development 527 BIM-Drawn Two-Story Wood-Framed Residence 560 Chapter 16 Commercial Buildings 584 Program, Site, and SD 585 DD and CD 585 Margaux—Masonry Building CD 589 Index 607

Read more less

Book SynopsisMaterials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses.Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout.This new sixth edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy-saving building components. Table of ContentsContentsAbout the authorPreface to sixth editionAcknowledgementsIntroductionAbbreviations1 Bricks and brickworkIntroductionClay bricksUnfired clay bricksReclaimed clay bricksBrickworkCalcium silicate bricksConcrete bricksReferences2 Blocks and blockworkIntroductionConcrete blocksClay blocksNon-clay blocksBlockworkBeam and block flooringLandscape blockworkReferences3 Lime, cement and concreteIntroductionLimeCementConcreteReinforced concreteVisual concreteConcrete componentsReferences4 Timber and timber productsIntroductionTimberTimber productsRecycling timberReferences5 Ferrous and non-ferrous metalsIntroductionFerrous metalsFerrous alloysCoated steelsAluminiumCopperLeadZincTitaniumProcess of metallic corrosionReferences6 Bitumen and flat roofing materialsIntroductionWarm, cold and inverted roofsReinforced bitumen membranesMastic asphaltSingle-ply roofing systemsLiquid coatingsGreen roofsReferences7 GlassIntroductionManufactureNon-sheet productsSheet productsIntelligent glass facadesGlass supporting systemsGlazing check listReferences8 Ceramic materialsIntroductionCeramic productsReferences9 Stone and cast stoneIntroductionTypes of stoneStoneworkDeterioration of stoneMaintenance of stoneworkCast stoneReferences10 PlasticsIntroductionPolymerisationPolymer typesAdditivesDegradation of plasticsProperties of plasticsPlastics forming processesPlastics in constructionRecycling of plasticsReferences11 Glassfibre-reinforced plastics, concrete and gypsumIntroductionGlass fibresGlassfibre-reinforced plasticsGlassfibre-reinforced concreteGlassfibre-reinforced gypsumReferences12 Plaster and board materialsIntroductionGypsum plasterLime plasterCalcium silicate boardsReferences13 Insulation materialsIntroductionThermal and sound insulation materialsInorganic insulation materialsOrganic insulation materialsAluminium foilPanel systemsReferences14 Sealants, gaskets and adhesivesIntroductionSealantsTypes of sealantGasketsAdhesivesReferences15 Paints, wood stains, varnishes and colourIntroductionColourPaintsWood finishesReferences16 Energy-saving materials and componentsIntroductionPhotovoltaicsCombined photovoltaic and soar collectorsSolar collectorsSolar air heating systemsLight pipesAir and ground source heat pumpsGroundwater cooling systemsWind catchersMechanical ventilation and heat recovery systemsWind turbine systemsWater management systemsPhase change systemsEnergy-generating paving slabsReferences17 Recycled and ecological materialsIntroductionStraw balesCardboardRammed earth and cob constructionEarth-sheltered buildingsClay productsRecycled tyresPapercreteBiomaterialsSandbagsReferences18 Sustainability and BIMIntroductionZero carbon targetsSpecification of materialsRecycling and deconstructionBuilding information modellingReferencesIndex

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

Book SynopsisThis book provides a clear guide for practitioners looking to establish or already conducting research projects in a practice context and graduate students looking to support their studies and role within practice. The book is divided into three key sections. The first section, across Chapters Two and Three, discusses why research is relevant to practice, how it benefits both practice and their clients, the breadth of topics, and tackles the key challenges facing research in practice and discusses how to overcome them, including how to fund research in practice. Section two, across Chapters Four to Seven, focuses on the mechanics of a research project, providing a step-by-step guide to reviewing literature and publications, data collection and research methods, ethics, writing up and publishing.In the final section, Chapter Eight presents profiles of twelve architecture practices ranging in size, structure, location, research interest and approach, followed by illustraTable of Contents1. Introduction 2. Making the Case for Research in Practice 3. Funding Research in Practice 4. Developing the Research Proposal 5. The Research Process 6. Research Ethics 7. Publishing your Research 8. Case Studies 9. Conclusions References Index

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

Book SynopsisThis ground-breaking quarterly aims to act as an international forum for practitioners and academics by publishing cutting-edge work covering all aspects of architectural endeavour. Generously illustrated throughout, Architectural Research Quarterly is edited with busy practitioners and academics in mind. Contents include building design, urbanism, history, theory, environmental design, construction, materials, information technology, and practice. Reviews of significant buildings are published at a length and in a detail matched today by few other architectural journals. Articles in arq 6:2 include: Conversation with Steven Holl; Necessity and Poetry: David Lea's Bridge Pottery; Platform: Explorations of an Architectural idea; Sigurd Lewerentz: Church of St Peter, Klippan, 1963â66; Developmental design and build in Cambodia, Material Presence and the Mystery of the Object.

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

Book SynopsisThis book provides over 300 standard letters for architects and contract administrators to use at all stages of contract administration. The letters are grouped into sections which correspond with the RIBA Plan of Work: the aim is to cover all the common situations encountered in practice. This Fourth Edition has been revised to take account of the extensive changes to virtually the whole of the JCT suite of building contracts. Unless otherwise stated, all letters are suitable for use with: JCT Standard Building Contract (SBC) JCT Intermediate Building Contract (IC) JCT Intermediate Building Contract with contractor's design (ICD) JCT Minor Works Building Contract (MW) JCT Minor Works Building Contract with contractor's design (MWD) JCT Design and Build Contract (DB) GC/Works/1 (1998) With Quantities Contract The laTrade Review"Organised in an extremely user-friendly manner … invaluable for contractors, building surveyors and project managers." (Building Engineer, October 2008)Table of ContentsPreface to Fourth Edition. Introduction. 1 Appraisal. 1 To client, if asked to tender on fees. 2 To prospective client, offering services. 3 To client, regarding the first visit. 4 To client, setting out terms of appointment SFA/99 or S-Con-07-A. 5 To client, setting out terms of appointment CE/99 or S-Con-07-A (a). 6 To client, setting out terms of appointment CE/99 or S-Con-07-A (b). 7 To Client, setting out terms of appointment SW/99 or C-Con-07-A (a). 8 To client, setting out terms of appointment SW/99 or C-Con-07-A (b). 9 To client, requesting payment in advance. 10 To client, regarding other architects engaged on the work. 11 To other architect, regarding former engagement. 12 To client, if former architect notifies some problem. 13 To client, if former architect states that the client does not have a copyright licence. 14 To client who claims to have a copyright licence. 15 To client, if architect asked to sign a warranty not previously mentioned. 16 To client, if architect asked to sign a warranty only agreed in principle. 17 To client if asked to provide a certificate of satisfaction not previously mentioned. 18 To client, if a conflict of interest arises. 19 To client, regarding the CDM Regulation duties. 20 To client, regarding site survey. 21 To client, before carrying out a site survey. 22 To client, if requested to help in boundary negotiations. 23 To client, if problem encountered during survey. 24 To geotechnical specialists, enquiring about soil survey. 25 To Coal Authority, requesting preliminary information. 26 To BT, requesting preliminary information. 27 To electricity supplier, requesting preliminary information. 28 To gas supplier, requesting preliminary information. 29 To water supplier, requesting preliminary information. 30 To drainage authority, requesting preliminary information. 31 To highway authority, requesting preliminary information. 32 To National Power, requesting preliminary information. 33 To Mobile Telephone Companies, requesting preliminary information. 34 To Cable Television, requesting preliminary information. 35 To client, seeking information. 36 To client, enclosing the feasibility report. 2 Design Brief . 37 To client, regarding early appointment of consultants. 38 To client who queries early appointment of consultants. 39 To client, enclosing draft for appointment of consultants. 40 Client to consultant [draft prepared by architect]. 41 To client, if consultants' agreements are complex. 42 To client who wishes architect to appoint consultants. 43 To client, if architect is to appoint consultants (a). 44 To client, if architect is to appoint consultants (b). 45 To client, if architect wishes to appoint consultants (a). 46 To client, if architect wishes to appoint consultants (b). 47 To consultant, seeking indemnity. 48 To client if consultancy services to be provided by the architect. 49 To client, suggesting the use of a supplier or sub-contractor in a design capacity. 50 To client, regarding lists of firms to design and supply/execute. 51 To client, regarding lists of firms to supply. 52 To client, if a relatively new material or process is proposed. 53 To members of the design team, arranging meeting. 54 To client, regarding fees for planning applications. 55 To planning authority, requesting outline approval. 56 To client who considers that drawing work should proceed before necessary approvals obtained. 57 To planning authority, requesting renewal of temporary permission. 58 To client, enclosing fee account. 59 To client, if fees are late: first reminder. 60 To client, if fees are late: second reminder. 61 To client, if fees are late: third reminder. 62 To client, if fees late: legal action threatened. 3 Concept. 63 To client, if amenity society writes with objections. 64 To amenity society, if they write with objections. 65 To client, regarding form of contract to be used (a). 66 To client, regarding form of contract to be used (b). 67 To client, regarding form of contract to be used (c). 68 To client, regarding form of contract to be used (d). 69 To client, regarding form of contract to be used (e). 70 To client, regarding form of contract to be used (f). 71 To client, regarding form of contract to be used (g). 72 To client, regarding the content of the Employer's Requirements. 73 To client, enclosing concept design report. 4 Design Development . 74 To manufacturer, asking for technical literature. 75 To manufacturer, asking representative to visit for general purposes. 76 To manufacturer, asking representative to visit for special purposes. 77 To manufacturer, asking for letter. 78 To local authority environmental services department, enclosing sketch plans. 79 To fire prevention officer, enclosing sketch plans. 80 To telephone service provider, enclosing sketch layout. 81 To electricity supplier, enclosing sketch layout. 82 To gas supplier, enclosing sketch layout. 83 To water supplier, enclosing sketch layout. 84 To highway authority, enclosing sketch layout. 85 To environmental health authority, regarding Clean Air Acts. 86 To client, advising that additional requirements will cause the cost to rise above budget. 87 To client, enclosing final draft of Employer’s Requirements. 88 To client, enclosing the scheme design report. 89 To client, regarding modification of the brief. 90 To client who cannot understand why redesigning costs extra fees. 91 To client, confirming instruction to do extra work. 5 Technical Design. 92 To client, regarding promptness of decisions. 93 To client, regarding modifications to size, shape, location or cost. 6 Production Information. 94 To client, requesting fees for Building Regulations application. 95 To client, requesting fees for Planning and Building Regulations application. 96 To planning authority, requesting approval of reserved matters. 97 To planning authority, applying for full planning approval. 98 To planning authority, applying for full planning permission and Building Regulations approval. 99 To local authority, requesting Building Regulations Approval. 100 To HM Inspectorate (Health and Safety Executive), applying for fire certificate. 101 To client, regarding main contractor tender list. 102 To client, regarding main contractor tender list if two stage tendering is to be used. 103 To client, confirming tender details. 104 To donor, returning gift. 105 To prospective named sub-contractor/person, enquiring if willing to submit a tender. 106 To prospective contractor, enclosing questionnaire. 107 To referee, regarding suitability of contractor. 108 To contractor, enquiring if contractor is willing to submit a tender. 109 To unsuccessful sub-contractors and suppliers. 110 To client, confirming the amount of liquidated damages. 7 Tender Documentation. 111 To client, if clerk of works required. 112 To all contractors on tender list, if date delayed. 8 Tender Action. 113 To client, regarding letter of intent to named sub-contractors and suppliers. 114 To named sub-contractor or supplier: letter of intent. 115 To contractor, inviting it to tender if bills of quantities included. 116 To contractor, inviting it to tender if bills of quantities not included. 117 To contractor, inviting it to tender. 118 To client and quantity surveyor, enclosing copy of invitation to tender. 119 To all contractors, regarding questions during the tender period. 120 To client, regarding opening of tenders. 121 To contractor who submits a qualified tender. 122 To contractor who submits a qualified tender if insufficient compliant tenders received. 123 To contractors who submit the second and third lowest tenders. 124 To contractors not among the three lowest tenderers. 125 To contractors who submit the second and third lowest tenders if another tender accepted. 126 To contractor who submits the lowest tender, but with errors to be dealt with when overall price is dominant. 127 To contractor who submits lowest tender, but with errors to be dealt with where pricing document is dominant. 128 To contractor, accepting tender subject to formal documents. 129 To contractor, accepting tender and forming contract immediately. 130 To consultants, regarding successful tenderer. 131 To unsuccessful tenderers. 9 Mobilisation. 132 To contractor, enclosing the contract documents. 133 To client, enclosing the contract documents. 134 To contractor, returning one copy of the contract documents. 135 To client, regarding letter of intent to contractor. 136 To contractor: letter of intent. 137 To contractor regarding insurance. 138 To contractor, regarding insurance. 139 To contractor, regarding insurance. 140 To client, regarding insurance (a). 141 To client, regarding insurance (b). 142 To client, regarding insurance (c). 143 To contractor, regarding insurance policies. 144 To contractor, requesting evidence of insurance. 145 To contractor, regarding performance bond. 146 To contractor, regarding advance payment bond. 147 To contractor, regarding off-site materials bond. 148 To client, at the beginning of the building contract. 149 To clerk of works, on appointment. 150 To contractor, noting the authority of the clerk of works. 151 To contractor, regarding extension of authority of the clerk of works. 152 To contractor, naming authorised representatives. 153 To contractor, regarding the issue of instructions. 154 To contractor, regarding sub-letting. 155 To contractor, regarding sub-letting. 156 To contractor, if architect is employee of the employer. 10 Construction to Practical Completion. 157 To contractor, if it fails to maintain insurance cover (a). 158 To contractor, if it fails to maintain insurance cover (b). 159 To contractor, if it fails to maintain insurance cover (c). 160 To contractor, if it fails to maintain insurance cover (d). 161 To client, if contractor fails to maintain insurance cover (a). 162 To client, if contractor fails to maintain insurance cover (b). 163 To client, if contractor fails to maintain insurance cover (c). 164 To client, if contractor fails to maintain insurance cover (d). 165 To contractor, confirming possession of the site. 166 Draft letter from employer to contractor, deferring possession of the site. 167 To contractor, who wrongly asks the architect to instruct integration of CDP design. 169 To contractor, if architect finds a discrepancy within the Contractor's Proposals. 170 To contractor, if architect finds an inconsistency in CDP documents. 171 To contractor, requesting consent to the addition of persons to the list under clause 3.8. 172 To contractor, if it sub-lets without architect's consent (a). 173 To contractor, if it sub-lets without architect's consent and not in accordance with clauses 3.6 or 3.7 (b). 174 To contractor, regarding employer's licensees (a). 175 To contractor, regarding employer's licensees (b). 176 To contractor, regarding employer's licensees (e). 177 To client, enclosing report on progress. 178 To persons affected, enclosing extract of minutes. 179 To originator of minutes, if architect disagrees with contents. 180 To client, if disagreeing with former architect's decisions. 181 To contractor client, if disagreeing with former architect's decisions. 182 To contractor client, if architect’s drawings rejected. 183 To contractor client, if instructions received which are contrary to the Employer’s Requirements. 184 To employer who is seeking advice, if architect engaged by contractor client. 185 To contractor, on receipt of master programme. 186 To contractor, on receipt of master programme if required to approve it. 187 To contractor, if architect asked to check setting out. 188 To contractor, confirmed acceptance under schedule 2. 189 To QS, if failing to respond to contractor’s valuation where there is disagreement. 190 To contractor, if seeking payment for off-site materials and there is no employer’s list. 191 To contractor, who has submitted drawings (a). 192 To contractor who has submitted drawings under the design submission procedure (b). 193 To contractor who has submitted design drawings (c). 194 To contractor who contends that compliance with a comment will give rise to a variation. 195 To contractor, if requesting information and there is no information release schedule (a). 196 To contractor if requesting information (b). 197 To contractor if requesting information (c). 198 To contractor, if requesting information on the information release schedule. 199 To contractor, if letter not understood. 200 To contractor, pending detailed reply. 201 To contractor, seeking proof of compliance (a). 202 To contractor, seeking proof of compliance (b). 203 To contractor, requesting samples. 204 To contractor, regarding compliant samples. 205 To contractor, regarding failure of samples. 206 To manufacturer, if problems with product on site. 207 To quantity surveyor regarding defective work. 208 Draft letter from employer to contractor, amount proposed to be paid (a). 209 Draft letter from employer to contractor, amount proposed to be paid (b). 210 Draft letter from employer to contractor, amount proposed to be withheld (a). 211 Draft letter from employer to contractor, amount proposed to be withheld (b). 212 To contractor, if defective work opened up. 213 To contractor, after failure of work (a). 214 To contractor, after failure of work (b). 215 To client, confirming instruction which entails extra cost. 216 To client, if material change to approved design necessary. 217 To contractor, requiring compliance with instruction. 218 To contractor, who fails to comply with notice. 219 To Contractor, if no grounds for extension of time. 220 To contractor, if no extension of time due. 221 To contractor, if issuing extension in two parts because of lack of time before completion date. 222 To contractor, giving extension of time. 223 To client, enclosing a report on extension of time. 224 To contractor, shortly after practical completion. 225 To contractor, reviewing extensions of time after completion date or practical completion (a). 226 To contractor, reviewing extensions of time after completion date or practical completion (b). 227 To client, enclosing certificate of non-completion (a). 228 To client, if Works not complete (b). 229 To client, if Works not complete by date for completion and further extensions may be due. 230 Draft letter from employer to contractor, before deducting liquidated damages. 231 To client, advising on the deduction of liquidated damages. 232 To client, if it would be unfair to deduct liquidated damages. 233 To client, regarding common law claims. 234 To client regarding loss and/or expense applications. 235 To contractor, if ex-gratia or common law application submitted. 236 To client, regarding ex-gratia claims. 237 To contractor, rejecting application due to failure to comply with contract. 238 To contractor, if application badly presented. 239 To contractor, after receipt of estimate of loss and/or expense under supplemental provision, schedule 2, paragraph 5. 240 To contractor, requesting further information in support of financial claim. 241 To contractor, rejecting application for loss and/or expense. 242 To contractor, accepting financial claim. 243 To contractor, partly accepting financial claim. 244 To quantity surveyor, requesting ascertainment of loss and/or expense. 245 To quantity surveyor, requesting partial ascertainment of loss and/or expense. 246 To client, enclosing report on application. 247 To client, on receipt of contractor’s 7-day notice suspending performance of obligations. 248 Draft letter from employer to contractor, on receipt of 7-day notice suspending performance of obligations. 249 To contractor, on resumption of obligations after suspension. 250 To contractor, giving notice of default (a). 251 To contractor, giving notice of default (b). 252 To contractor, giving notice of default (c). 253 To client, if contractor continues the default. 254 To client, if contractor continues the default (b). 255 To client, if contractor is in default (c). 256 Draft letter from employer to contractor, terminating employment after default notice. 257 To client, if termination by either party possible. 258 Draft letter from employer to contractor, giving notice if termination by either party possible. 259 Draft letter from employer to contractor, terminating if termination by either party possible. 260 Draft letter from employer to contractor, terminating employment after loss or damage. 261 Draft letter from employer to contractor, terminating if terrorism cover no longer available. 262 Draft letter from employer to contractor, determining contract. 263 To client, regarding insurance after termination. 264 To client, if contractor likely to terminate its employment or has issued a default notice. 265 To client, if contractor likely to terminate its employment if termination by either party is possible. 266 To client, if contractor likely to terminate its employment because it is just and equitable. 267 To client, if contractor terminates its employment. 268 Draft letter from employer to contractor, giving notice of intention to refer a dispute to adjudication. 269 Draft letter from employer to Nominating Body, requesting nomination of an adjudicator. 270 Draft letter from employer to adjudicator, enclosing the Referral. 271 Draft letter from employer to contractor, if adjudicator’s decision is in employer’s favour. 272 To employer, if asked to respond to contractor’s adjudication notice. 273 Draft letter from employer to contractor, requesting concurrence in the appointment of an arbitrator. 274 Draft letter from employer to contractor, requesting concurrence in the appointment of an arbitrator. 275 Draft letter from employer to relevant Professional Body, if there is no concurrence in the appointment of an arbitrator or, in the case of GC/Works/1 (1998), the named arbitrator is unable to act. 276 Draft letter from employer to contractor proposing mediation of a dispute. 277 To client, if impractical to carry out certain services. 278 To client, determining all performance and obligations by reasonable notice. 279 To client, giving 14 days notice to terminate the agreement. 280 To client, terminating the agreement. 279 To client, giving 14 days notice to terminate the agreement. 281 To client, if client terminates appointment by reasonable notice (a). 282 To client, if client terminates appointment by reasonable notice (b). 283 To client, if client has not given instructions to resume suspended service within six months (a). 284 To client, if client has not given instructions to resume suspended service within six months (b). 285 To client, if another architect appointed. 286 To other architect, appointed by client, if fees etc. outstanding. 287 To employer who wishes to use new building before practical completion certified (a). 288 To employer who wishes to use part of the Works before practical completion certified (b). 289 To consultants, regarding testing and commissioning of plant. 290 To client, regarding testing and commissioning of plant. 291 To client, prior to completion. 292 To client, confirming handover meeting. 293 To contractor regarding inspection before completion. 294 To consultants, regarding inspection before completion. 11 Post Practical Completion. 295 To client, after handover. 296 To contractor, if sending schedule of defects. 297 To contractor if immediate attention required during the rectification period. 298 To contractor, requiring making good during the rectification/maintenance period. 299 To client, if some defects are not to be made good. 300 To contractor, instructing that some defects are not to be made good. 301 To contractor, requiring ‘as-built' records. 302 To contractor, requiring return of all drawings and documents. 303 To client, seeking permission to publish details of the project. 304 To client, requesting feedback information. 305 To consultants, requesting feedback information. 306 To contractor, requesting feedback information. 307 To client, if architect asked to inspect suspected defects after the end of the rectification period. 308 To client regarding latent defects after the final certificate. 309 To contractor, regarding latent defects. Index

Read more less

Book SynopsisLe Corbusier designed two color collections for the Salubra wallpaper company: the “Clavier de couleurs” of 1931, with 43 colors, and the 1959 collection, with 20. Not content with the mere color selection, drawn from his experience as an architect and painter, he also organized the tones on 12 sample cards in such a manner that, by using a slider, three or five colors could be varyingly isolated or combined. Each card contained a different color scheme meant, when applied, to create a particular spatial effect. This would become not only a useful tool but also a kind of testament of the purist color theory, an essential groundwork and a valuable instrument for all those who deal with color in theory or practice. In the first volume, Arthur Rüegg, the renowned Le Corbusier expert, explores the significance of the Salubra collections for the history of modern architecture, and in the epilogue to this third edition, presents the specialist research conclusions from the last twenty years. The second volume contains 13 color plates with the 63 colors, printed using the screen printing method and glued by hand as well as 4 separate sliders in pocket. Volume three consists of 63 full page color sample sheets, also printed using the screen printing method.

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

Book SynopsisFrom destruction to regeneration. An integrative approach creating ecosystemic living spaces in architecture and urbanism.- Ruralkit Integrated spatial devices for multifunctional rural farms and countryside facilities in Sardinia.- Exploring the potential Role of AI Tools in Automating Design Validation for Building Code Compliance in Design Construction.- The Digitisation of the Cultural Heritage understanding the requirements to define a methodology.- Eco Friendly Materials and Products from the Waste Derived from the Processing of Apricena Stone State of the Art and New Employment Prospects.- Methodology for designing adaptive facade components smart materials and 4D printing for resilient construction.- Multi criteria approach for assessing the sustainable skin for temporary housing modules.- A Comparison of Digital Procedures to support Renovation Processes of the Built Environment.- Building Heritage Materials Passports BHMPs for Resilient Communities.- Reversible building design Material circularity and life cycle extension in the construction industry.- Valorisation and reuse of cereal wastes for construction applications in a circular economy perspective a review of the state of the art.- Innovative cardboard components for architecture methodologies for performances and durability assessment.- Sustainable architecture computational modeling of green roofs through BIM and Dynamo VPL integration.- The Innovation Imagined for the Window International Patents in Comparison.- Sustainability Assessment of Refurbishment vs New ZEB Construction Systems A Long Term LCA Perspective on Durability and Building Lifespan.- Pilot Project of a New Positive Energy Timber Building for Sustainable Climate Positive Circular Communities Challenges Opportunities and Innovations.

Read more less

Book SynopsisDefining a research question, describing why it needs to be answered and explaining how methods are selected and applied are challenging tasks for anyone embarking on academic research within the field of landscape architecture. Whether you are an early career researcher or a senior academic, it is essential to draw meaningful conclusions and robust answers to research questions.Research in Landscape Architecture provides guidance on the rationales needed for selecting methods and offers direction to help to frame and design academic research within the discipline. Over the last couple of decades the traditional orientation in landscape architecture as a field of professional practice has gradually been complemented by a growing focus on research. This book will help you to develop the connections between research, teaching and practice, to help you to build a common framework of theory and research methods.Bringing together contributions from landscape architects across the world, this book covers a broad range of research methodologies and examples to help you conduct research successfully. Also included is a study in which the editors discuss the most important priorities for the research within the discipline over the coming years. This book will provide a definitive path to developing research within landscape architecture.Trade ReviewLandscape architecture is a potentially powerful profession and discipline: a field poised to transform the planet for the better. This possibility will only be realized through a more robust research agenda. The authors of Research in Landscape Architecture have produced just such a framework. They present a helpful, thoughtful roadmap for landscape architecture scholars.Frederick Steiner, Dean and Paley Professor, School of Design, University of PennsylvaniaAs a practice-led discipline, landscape architecture faces a challenge when trying to impose methodology on a somewhat theory-resistant subject. This new book presents cases of landscape architecture research in their methodical context. We learn how landscape architecture research questions are formulated and how evidence for answering them can be found. We live in an era of ever increasing complexity on the one hand and strong specialisation on the other. Where to position the holistic perspective of this domain? This book will give valuable orientation for anybody looking for systematic knowledge production in landscape architecture. It will inspire especially early-career researchers.Ellen Fetzer, Nürtingen-Geislingen University, Germany, International Master of Landscape Architecture (IMLA)Table of ContentsIntroduction (Adri van den Brink, Diedrich Bruns, Simon Bell and Hilde Tobi) Part I: Raising Awareness, 1. Advancing Landscape Architecture Research (Diedrich Bruns, Adri van den Brink, Hilde Tobi and Simon Bell), 2. Research in Landscape Architecture: A Process Approach (Hilde Tobi and Adri van den Brink), Part II: Setting the Stage, 3. The Role of Theory (Ian H. Thompson), 4. The Relationship between Research and Design (Sanda Lenzholzer, Ingrid Duchhart and Adri van den Brink), 5. The Challenge of Publication (Maggie Roe), 6. Assessing Research Priorities and Quality (Jurian Meijering, Hilde Tobi, Adri van den Brink and Diedrich Bruns), Part III: Selected Approaches and Methods, 7. Case Studies (Simon Swaffield), 8. Landscape Biography (Jan Kolen, Hans Renes and Koos Bosma), 9. Social Media: The New Resource (Ron van Lammeren, Simone Theile, Boris Stemmer and Diedrich Bruns), 10. Virtual Environments (Sigrid Hehl-Lange and Eckart Lange), 11. Walking (Henrik Schulz and Rudi van Etteger), 12. Design Guidelines (Martin Prominski), Part IV: Addressing some of the Grand Challenges, 13. Cultural Landscape Meanings and Values (Ken Taylor), 14. Landscape and Health (Catharine Ward Thompson), 15. Thermally Comfortable Urban Environments (Robert D. Brown and Terry J. Gillespie), 16. The Urban Water Challenge (Antje Backhaus, Ole Fryd and Torben Dam)

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

Book SynopsisFind that you’re spending much longer than planned on a feasibility study? Or that you have drifted into detailed design without formalising an appropriate form of appointment? This practical guide details the benefits of a feasibility study. Once you’ve secured the commission, how do you ensure you’re following current best practice? Aimed at architects, it identifies the pitfalls involved in undertaking a feasibility study and explains how to set boundaries, organise the process and manage clients’ aspirations. By featuring recent live projects, alongside advice from successful architectural practices, it illustrates how a feasibility study can help achieve positive outcomes and avoid the dangers of a poorly defined brief and service proposal. Presenting the client’s, as well as the architect’s, perspective, this publication highlights why a feasibility study is a sensible way of establishing viability prior to committing to a full-service commission. It underlines the significance of ‘adding value’ as an architect.Table of ContentsIntroduction Chapter 1: The RIBA Plan of Work Case Study 1: Church reordering Chapter 2: The Client’s perspective Case Study 2: House extension Chapter 3: Selling the service – the Architects view Case Study 3: Community hall Chapter 4: Fees and appointment Case Study 4: Rowing centre Chapter 5: Managing the process Case Study 5: Research laboratories Chapter 6: Communications and stakeholders Case Study 6: Emergency services centre Chapter 7: Gathering and assimilating data Case Study 7: Reuse of heritage building Chapter 8: Developing the client’s brief Case Study 8: House on garden plot Chapter 9: Option appraisals Case Study 9: Classroom wing Chapter 10: Monitoring and reporting back Case Study 10: Office development Chapter 11: The next stage Case Study 11: Affordable housing Summary

Read more less

Book Synopsis

Read more less

Book SynopsisA practical, single-source guide to successful strategies for landscape architecture research As the scope of landscape architecture expands to engage with other disciplines, and streams of information directing this field continue to grow and diversify, it becomes increasingly important for landscape architects to be able to implement a range of effective research strategies when seeking, creating, and validating knowledge. Landscape Architecture Research offers a framework for advancing better design thinking solutions by supplying readers with a system of inquiry tactics that open up a wider range of research possibilities. With a logical and innovative approach that favors legitimacy of knowledge based on collective, grounded practices, rather than strict adherence to protocols drawn only from scientific models, this comprehensive, illustrated guide produces a sound argument for establishing a new paradigm for legitimizing research quality. Landscape ArchitecTable of ContentsPreface xi Acknowledgments xiii Chapter 1 Introduction 1 1.1 Knowledge in Landscape Architecture 1 1.2 The Need for a Guide 2 1.3 The Gatekeeping Dilemma in Context 4 1.4 Mapping the Terrain 7 1.5 Building a Research-Based Discipline 13 References 15 Chapter 2 Knowing Landscape Architecture 17 2.1 Introduction 17 2.2 The Nature of Professional Disciplines 17 2.3 Domains of Knowledge in Landscape Architecture 20 2.4 Research Needs 26 References 29 Chapter 3 Theory/Research/Scholarship/Critique 30 3.1 Introduction 30 3.2 Competing Ideals of Theory 31 3.3 Representing Theory 34 3.4 Theoretical Conversations 35 3.5 Research and Scholarship 37 3.6 Studio Design as a Research Setting 40 3.7 Theory and Critique 42 3.8 Conclusion 43 References 44 Chapter 4 Integrating Design and Research 48 4.1 Introduction 48 4.2 Problems and Purpose 48 4.3 Framing a Research Question 52 4.4 Degrees of Research 53 4.5 Assessing Research Quality 56 4.6 A Developmental Heuristic 58 References 63 Chapter 5 Descriptive Strategies 65 5.1 Introduction 65 5.2 Observation 66 5.3 Secondary Description 71 5.4 Descriptive Social Surveys 72 5.5 Complex Description 77 5.6 Descriptive Case Studies 79 Descriptive Strategies: Summary 85 References 85 Chapter 6 Modeling and Correlational Strategies 87 6.1 Introduction 87 6.2 Descriptive/Synthetic Models 89 6.3 Analytical Models and Correlation 90 6.4 Simple Correlation 93 6.5 Multiple Correlations 96 6.6 Spatial Correlations 98 6.7 Predictive Modeling 101 6.8 Dynamic Simulation Modeling 103 Modeling Strategies: Summary 110 References 112 Chapter 7 Experimental Strategies 114 7.1 Introduction 114 7.2 Classic Experiments 116 7.3 Field Experiments 119 7.4 Quasi Experiments 119 7.5 The Metaphor of Experimentation 122 Experimental Strategies: Summary 124 References 124 Chapter 8 Classification Schemes 126 8.1 Introduction 126 8.2 Collection/Inventory/Catalogue 128 8.3 Typology 133 8.4 Taxonomy 136 8.5 Index 140 8.6 Bibliography and Literature Review 144 Classification Strategies: Summary 149 References 149 Chapter 9 Interpretive Strategies 152 9.1 Introduction 152 9.2 Ethnography 153 9.3 Discourse Analysis 161 9.4 Iconology and Iconography 164 9.5 Historiography 165 Interpretive Strategies: Summary 169 References 172 Chapter 10 Evaluation and Diagnosis 174 10.1 Introduction 174 10.2 Parameters, Norms, and Rubrics 175 10.3 Design Evaluation 179 10.4 Diagnostics 181 10.5 Landscape Assessment 184 Evaluation and Diagnosis Strategies: Summary 187 References 190 Chapter 11 Engaged Action Research 192 11.1 Introduction 192 11.2 Action Dimensions in Pedagogical Research 194 11.3 Participatory Design in Service Learning 197 11.4 Participatory Action Research (PAR) 200 11.5 Transdisciplinary Action Research (TDAR) 202 Engaged Action Research Strategies: Summary 203 References 204 Chapter 12 Projective Design 205 12.1 Design as Research 205 12.2 Design Operations 209 12.3 Design Interpretations 215 12.4 Design Reflections 217 Projective Design Strategies: Summary 221 References 221 Chapter 13 Logical Systems (Axioms, Rules, and Argumentation) 223 13.1 Introduction 223 13.2 Logical Relationships 224 13.3 Synthetic Logic 227 13.4 Expanded Field Analysis 228 13.5 Spatial Syntax as Logical System 229 13.6 Pattern Language 231 Logical Systems: Summary 234 References 235 Chapter 14 Research and Practice 237 14.1 Introduction 237 14.2 Integrating Research Strategies into Practice—Evidence-Based Design 239 14.3 Integrating Research into Practice—Polemical Transformation 240 14.4 Integrating Knowledge into Practice—Grassroots Movements 241 14.5 Organizing Practice-Based Research 242 14.6 Reprise 246 References 247 Index 249

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less

Book SynopsisArchitectural Building Codes by James G. Scott All architects musthave a solid working knowledge of building codes. Noncompliancemeans facing strained schedules and budgets at best, and lawsuitsat worst. Yet until now, no resource has been available toprofessionals that demystifies architectural building codes instraightforward, easy-to-understand language, with a unique graphicpresentation. James G. Scott''s Architectural Building Codes slicesthrough the technical, legal, and bureaucratic jargon of buildingcodes with a direct, engaging style. Beginning with the assumptionthat building codes are by nature complex and difficult tounderstand, Mr. Scott provides both the theoretical principles andpractical grounding all architectural professionals need toefficiently incorporate code regulations into their designs. Theauthor bridges the gap between theory and application, turning thearcane, impenetrable rules of building codes into usable concepts.The material is cogently organized from geTable of ContentsCodes, Standards, and Other Regulations. Administration. Use of Occupancy. Special Occupancy. General Building Limitations. Type of Construction. Fire-Resistant Materials and Construction. Interior Finishes. Fire Protection Systems. Means of Egress. Accessibility for Individuals with Disabilities and the Americanswith Disabilities Act. Interior Environment. Energy Conservation. Exterior Wall Coverings. Roofs and Roof Structures. Structural Loads, Tests, and Inspections. Foundations and Retaining Walls. Building Materials. Elevators and Conveying Systems. Plumbing and Mechanical. Conclusion. Appendix. Bibliography. Index.

Read more less

Book SynopsisTopologicPy a Syntopic Integration of Geometry, Topology and Semantics in Architectural Design.- AI and architecture.- Deciphering Urban Morphogenesis A Morphospace Perspective.- Co learning between research and practice in planning: adressing the physical form of cities.- Combining space syntax and kernel methods in the delimitation of the Matosinhos Urban Pressure Zone.- Adaptation of Plot systems a method for analysing space and time.- Measuring the impact of urban structures shaped by topography on the competitiveness between car and pedestrian a GIS simulation on Salvador vs San Francisco.- Advancing Spatial Cognition Analysis Integrating Agent-Based Modelling with Space Syntax in the NetLogo Framework.- Visualizing Urban Experience AI and Computer Vision Framework for Historic Commercial Streets in Egypt.- The Effect of Potential Urban Elements on Finding Direction in Urban Space Exampling Of Kadiköy Yeldegirmeni, Istanbul,Turkey.- Reimagining Human-Nature Coexistence: An Integrative Approach to Architectural Design with Biomimicry, Generative Modeling, and AI.- Reimagining Digitalized Space Integrating Meaning and Technology in Building Systems.- Parametric Software to Support Architectural Design strategies.- Optimizing Sustainability through digital tools Energy and Carbon Comparative Analysis of Brick, Concrete and Wood Frame Constructions in Coimbra Residences.- Reassembling Waste: Towards a Carbon Zero Built Environment.- Advancing Architectural Visualization Boosting Scale and Reality with Augmented Reality.- Architecting the Metaverse A Paradigm Shift in Architecture Co-Design.

Read more less

a huge range and FREE tracked UK delivery on ALL orders.

Read more less