Search results for """ "PhaseTransformationStress Interactions in Composite Materials III""
ISTE Ltd and John Wiley & Sons Inc Phase Transformations
Book SynopsisThis book is part of a set of books which offers advanced students successive characterization tool phases, the study of all types of phase (liquid, gas and solid, pure or multi-component), process engineering, chemical and electrochemical equilibria, and the properties of surfaces and phases of small sizes. Macroscopic and microscopic models are in turn covered with a constant correlation between the two scales. Particular attention has been given to the rigor of mathematical developments. This fifth volume is devoted to the study of transformations and equilibria between phases. First- and second-order pure phase transformations are presented in detail, just as with the macroscopic and microscopic approaches of phase equilibria. In the presentation of binary systems, the thermodynamics of azeotropy and demixing are discussed in detail and applied to strictly-regular solutions. Eutectic and peritectic points are examined, as well as the reactions that go with them. The study of ternary systems then introduces the concepts of ternary azeotropes and eutectics. For each type of solid-liquid system, the interventions of definite compounds with or without congruent melting are taken into account. The particular properties of the different notable points of a diagram are also demonstrated.Table of ContentsPreface xi Notations and Symbols xv Chapter 1. Phase Transformations of Pure Substances 1 1.1. Standard state: standard conditions of a transformation 1 1.2. Classification and general properties of phase transformations 2 1.2.1. First-order transformations and the Clapeyron relation 4 1.2.2. Second-order transformations 7 1.3. Liquid–vapor transformations and equilibrium states 16 1.3.1. Method of two equations of state, using the Clapeyron equation 16 1.3.2. Gibbs energy and fugacity method 18 1.3.3. Unique equation of state method 19 1.3.4. The region of the critical point and spinodal decomposition 21 1.3.5. Microscopic modeling 22 1.3.6. Liquid–vapor equilibrium in the presence of an inert gas 26 1.4. Solid–vapor transformations and equilibriums 28 1.4.1. Macroscopic treatment 28 1.4.2. Microscopic treatment 29 1.5. Transformations and solid–liquid equilibria 30 1.5.1. Macroscopic treatment 31 1.5.2. Microscopic treatment 31 1.6. Diagram for the pure substance and properties of the triple point 32 1.7. Allotropic and polymorphic varieties of a solid 35 1.7.1. Enantiotropy 36 1.7.2. Monotropy 39 1.7.3. Transition from enantiotropy to monotropy and vice versa 39 1.8. Mesomorphic states 40 Chapter 2. Properties of Equilibria Between Binary Phases 43 2.1. Classification of equilibria between the phases of binary systems 43 2.2. General properties of two-phase binary systems 45 2.2.1. Equilibrium conditions for two-phase binary systems 45 2.2.2. Conditions of evolution of a two-phase binary system 46 2.3. Graphical representation of two-phase binary systems 47 2.3.1. Gibbs energy graphs 47 2.3.2. Phase diagram in the mono- and bi-phase zones 53 2.3.3. Isobaric cooling curves 63 2.4. Isobaric representation of three-phase binary systems 66 2.4.1. Gibbs energy curve 66 2.4.2. Isobaric phase diagram in tri-phase regions 68 2.4.3. Isobaric cooling curves with tri-phase zones 70 2.5. Isothermal phase diagrams 72 2.6. Composition/composition curves 73 2.7. Activity of the components and consequences of Raoult’s and Henry’s laws 73 Chapter 3. Equilibria Between Binary Condensed Phases 75 3.1. Equilibria between phases of the same nature: liquid–liquid or solid–solid 76 3.1.1. Thermodynamics of demixing 76 3.1.2. Demixing in the case of low reciprocal solubilities 79 3.1.3. Demixing of strictly-regular solutions 81 3.2. Liquid–solid systems 84 3.2.1. Thermodynamics of the equilibria between a liquid phase and a solid phase 86 3.2.2. Isobaric phase diagrams of equilibria between a solid and a liquid 90 3.2.3. Solidus and liquidus in the vicinity of the pure substance 97 3.3. Equilibria between two solids with two polymorphic varieties of the solid 100 3.4. Applications of solid–liquid equilibria 102 3.4.1. Solubility of a solid in a liquid: Schröder–Le Châtelier law 102 3.4.2. Determination of molar mass by cryometry 104 3.5. Membrane equilibria – osmotic pressure 106 3.5.1. Thermodynamics of osmotic pressure 107 3.5.2. Osmotic pressure of infinitely-dilute solutions: the Van ‘t the Hoff law 109 3.5.3. Application of osmotic pressure to the determination of the molar mass of polymers 110 3.5.4. Osmotic pressure of strictly-regular solutions 111 3.5.5. Osmotic pressure and the osmotic coefficient 112 Chapter 4. Equilibria Between Binary Fluid Phases 113 4.1. Thermodynamics of liquid–vapor equilibrium in a binary system 113 4.2. Liquid–vapor equilibrium in perfect solutions far from the critical conditions 117 4.2.1. Partial pressures and total pressure of a perfect solution 118 4.2.2. Isothermal diagram of a perfect solution 119 4.2.3. Isobaric diagram of a perfect solution 120 4.2.4. Phase composition curve 121 4.3. Liquid–gas equilibria in ideal dilute solutions 122 4.4. Diagrams of the liquid–vapor equilibria in real solutions 125 4.4.1. Total miscibility in the liquid phase 125 4.4.2. Partial miscibility in the liquid phase, heteroazeotropes 128 4.5. Thermodynamics of liquid–vapor azeotropy 129 4.5.1. Relation between the pressure of the azeotrope and the activity coefficients of the liquid phase at the azeotropic composition 129 4.5.2. Relation between the activity coefficient and the temperature of the azeotrope 130 4.6. Liquid–vapor equilibria and models of solutions 132 4.6.1. Liquid–vapor equilibria in strictly-regular solutions 132 4.6.2. Liquid–vapor equilibrium in associated solutions 137 4.7. Liquid–vapor equilibria in the critical region 140 4.8. Applications of liquid–vapor equilibria 143 4.8.1. Solubility of a gas in a liquid 143 4.8.2. Determination of molar masses by tonometry 145 4.8.3. Determination of molar masses by ebulliometry 146 4.8.4. Continuous rectification or fractional distillation 149 Chapter 5. Equilibria Between Ternary Fluid Phases 163 5.1. Representation of the composition of ternary systems 163 5.1.1. Symmetrical representation of the Gibbs triangle 163 5.1.2. Dissymmetrical representation of the right triangle 168 5.2. Representation of phase equilibria 169 5.2.1. Isothermal projections 169 5.2.2. Conjugate points and conodes 170 5.2.3. Isopleth sections 171 5.3. Equilibria in liquid phases with miscibility gaps 171 5.3.1. Representation of the miscibility gap 171 5.3.2. Sharing in liquid–liquid systems 173 5.3.3. Application of sharing between two liquids to solvent extraction 177 5.4. Liquid–vapor systems 182 5.4.1. Isothermal and isopleth sections (boiling and dew) 182 5.4.2. Distillation trajectories 184 5.4.3. Systems with two distillation fields 186 5.4.4. Systems with three distillation fields 187 5.5. Examples of applications of ternary diagrams between fluid phases 187 5.5.1. Treatment of argentiferous lead 187 5.5.2. Purity of oil products: aniline point 188 5.5.3. Obtaining concentrated ethyl alcohol 189 Chapter 6. Equilibria Between Condensed Ternary Fluid Phases 191 6.1. Solidification of a ternary system with total miscibility in the liquid state and in the solid state 192 6.2. Solidification of a ternary system with no miscibility and with a ternary eutectic 192 6.2.1. Invariant transformations of a liquid–solid ternary system 193 6.2.2. Representations of the ternary system with no miscibility in the solid state 194 6.2.3. Lowering of the melting point of a binary system by the addition of a component 199 6.2.4. Slope at the ternary eutectic 202 6.3. Ternary systems with partial miscibilities in the solid state and ternary eutectic 204 6.4. Solidification of ternary systems with definite compounds 208 6.4.1. Ternary system with a binary definite compound binary with congruent melting 208 6.4.2. Generalization to the case of a ternary compound and of multiple definite compounds 211 6.4.3. Definite compound with incongruent melting: quasi-peritectic transformation 213 6.5. A peritectic transformation in one binary system and total miscibility in the other two 215 6.6. The ternary peritectic transformation 217 Bibliography 219 Index 221
£125.06
Taylor & Francis Ltd Advanced Composite Materials and Structures
Book SynopsisThis book bridges the gap between theoretical concepts and their implementations, especially for the high-performance structures/components related to advanced composite materials. This work focuses on the prediction of various structural responses such as deformations, natural frequencies etc. of advanced composites under complex environments and/or loading conditions. In addition, it discusses micro-mechanical material modeling of various advanced composite materials that involve different structures ranging from basic to advanced, such as beams, flat and curved panels, shells, skewed, corrugated, and other materials, as well as various solution techniques via analytical, semi-analytical, and numerical approaches.This book: Covers micro-mechanical material modeling of advanced composite materials Describes constitutive models of different composite materials and kinematic models of different structural configuration Discusses pertinent analytical,Table of Contents 1. Multi-Directional Graded Composites: An Introduction 2. Free Vibration Characteristics of Bi-Directional Functionally Graded Composite Panels 3. Analytical Solution for the Steady-State Heat Transfer Analysis of Porous Nonhomogeneous Material Structures 4. Effect of Corrugation on the Deformation Behavior of Spatially Graded Composite Panels 5. Graphene-Magnesium Core-Shell Nanocomposites: Physical, Mechanical, Thermal, and Electrical Properties 6. Free Vibration of Carbon Nanotube-Reinforced Composite Beams under the Various Boundary Conditions 7. Transient Characteristics of Carbon Nanotube-Reinforced Composite Plates under Blast Load 8. Micromechanics-Based Finite Element Analysis of HAp-Ti Biocomposite Sinusoid Structure Using Homogenisation Schemes 9. Stability Behavior of Biocomposite Structures Using 2D-Finite Element Approximation 10. Dynamic Analysis of Sandwich Composite Plate Structures with Honeycomb Auxetic Core 11. Hygrothermoelastic Responses of Sinusoidally Corrugated Fiber-Reinforced Laminated Composite Structures 12. Flexural Behavior of Shear Deformable FGM Composites with Corrugation: Higher-Order Finite Element Approximation 13. Multiscale Analysis of Laminates Printed by 3D Printing Fused Deposition Modeling Method 14. Flexural Behavior of Carbon Nanotube-Reinforced Composites with Multiple Cutouts 15. Damage Studies in Curved Hybrid Laminates under Pullout Loading 16. Dynamic Behavior of Laminated Composite with Internal Delamination
£135.00
CRC Press Phase Transformations in Metals and Alloys
Book SynopsisRevised to reflect recent developments in the field, Phase Transformation in Metals and Alloys, Fourth Edition, continues to be the most authoritative and approachable resource on the subject. It supplies a comprehensive overview of specific types of phase transformations, supplemented by practical case studies of engineering alloys. The book's unique presentation links a basic understanding of theory with application in a gradually progressive yet exciting manner. Based on the authors' teaching notes, the text takes a pedagogical approach and provides examples for applications and problems that can be readily used for exercises.NEW IN THE FOURTH EDITION 40% of the figures and 30% of the text Insights provided by numerical modelling techniques such as ab initio, phase field, cellular automaton, and molecular dynamics Insights from the application of advanced experimental techniques, such as hTable of Contents 1. Thermodynamics and Phase Diagrams 2. Diffusion 3. Crystal Interfaces and Microstructure 4. Solidification 5. Diffusional Transformations in Solids 6. Diffusionless Martensitic Transformations
£58.99
ISTE Ltd and John Wiley & Sons Inc Heat Transfer in Polymer Composite Materials:
Book SynopsisThis book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.Table of ContentsPreface xv Chapter 1 Introduction to Heat Transfer During the Forming of Organic Matrix Composites 1Didier Delaunay Chapter 2 Experimental Determination and Modeling of Thermorphysical Properties 29Nicolas Boyard and Didier Delaunay Chapter 3 Experimental Determination and Modeling of Transformation Kinetics 77Nicolas Boyard, Jean-Luc Bailleul and M'hamed Boutaous Chapter 4 Phase Change Kinetics within Process Conditions and Coupling with Heat Transfer 121M'hamed Boutaous, Mattieu Zinet, Nicolas Boyard and Jean-Luc Bailleul Chapter 5 From the Characterization and Modeling of Cure-Dependent Properties of Composite Materials to the Simulation of Residual Stresses 157Yasir Nawab and Frederic Jacquemin Chapter 6 Heat Transfer in Composite Materials and Porous Media: Multiple-Scale Aspects and Effective Properties 175Michel Quintard Chapter 7 Thermal Optimization of Forming Processes 203Vincent Sobotka Chapter 8 Modeling of Thermoplastic Welding 235Gilles Regnier and Steven Le Corre Chapter 9 Multiphysics for Simulation of Forming Processes 269Luisa Silva, Patrice Laure, Thierry Coupez and Hugues Digonnet Chapter 10 Thermal Instrumentation for the Control of Manufacturing Processes of Organic Matrix Composite Materials 301Jean-Christophe Batsale and Christophe Pradere Chapter 11 Sensors for Heat Flux Measurement 333Fabien Cara and Vincent Sobotka Chapter 12 Thermal Radiative Properties of Polymers and Associated Composites 359Benoit Rousseau Chapter 13 Infrared Radiation Applied to Polymer Processes 385Yannick Le Maoult and Fabrice Schmidt List of Authors 425 Index 427
£136.76
Taylor & Francis Ltd Structural Analysis of Polymeric Composite Materials
Book SynopsisStructural Analysis of Polymeric Composite Materials, Second Edition introduces the mechanics of composite materials and structures and combines classical lamination theory with macromechanical failure principles for prediction and optimization of composite structural performance. It addresses topics such as high-strength fibers, manufacturing techniques, commercially available compounds, and the behavior of anisotropic, orthotropic, and transversely isotropic materials and structures subjected to complex loading. Emphasizing the macromechanical (structural) level over micromechanical issues and analyses, this unique book integrates effects of environment at the outset to establish a coherent and updated knowledge base. In addition, each chapter includes example problems to illustrate the concepts presented.Table of ContentsIntroduction. Review of Force, Stress, and Strain Tensors. Material Properties. Elastic Response of Anisotropic Materials. Unidirectional Composite Laminates Subject to Plane Stress. Thermomechanical Behavior of Multiangle Composite Laminates. Predicting Failure of a Multiangle Composite Laminate. Composite Beams. Stress Concentrations Near an Elliptical Hole. The Governing Equations of Thin-Plate Theory. Some Exact Solutions for Specially Orthotropic Laminates. Some Approximate Solutions for Symmetric Laminates.
£58.99
Cambridge University Press Phase Equilibria Phase Diagrams and Phase Transformations Their Thermodynamic Basis
Book SynopsisComputational tools allow material scientists to model and analyze increasingly complicated systems to appreciate material behavior. Accurate use and interpretation however, requires a strong understanding of the thermodynamic principles that underpin phase equilibrium, transformation and state. This fully revised and updated edition covers the fundamentals of thermodynamics, with a view to modern computer applications. The theoretical basis of chemical equilibria and chemical changes is covered with an emphasis on the properties of phase diagrams. Starting with the basic principles, discussion moves to systems involving multiple phases. New chapters cover irreversible thermodynamics, extremum principles, and the thermodynamics of surfaces and interfaces. Theoretical descriptions of equilibrium conditions, the state of systems at equilibrium and the changes as equilibrium is reached, are all demonstrated graphically. With illustrative examples - many computer calculated - and worked eTrade ReviewA review of the first edition: 'To sum up, for students of chemistry wishing to apply themselves to problems of the material sciences, this book provides an excellent foundation for understanding the thermodynamics of complex systems. It also offers much useful information for scientists who want to be able to handle problems of multicomponent systems, provided they will take the trouble to work through the text carefully to identify the formulas used, despite the shortage of cross-references.' Volkmar Leute, Angewandte ChemieTable of Contents1. Basic concepts of thermodynamics; 2. Manipulation of thermodynamic quantities; 3. Systems with variable composition; 4. Practical handling of multicomponent systems; 5. Thermodynamics of processes; 6. Stability; 7. Applications of molar Gibbs energy diagrams; 8. Phase equilibria and potential phase diagrams; 9. Molar phase diagrams; 10. Projected and mixed phase diagrams; 11. Direction of phase boundaries; 12. Sharp and gradual phase transformations; 13. Transformations in closed systems; 14. Partitionless transformations; 15. Limit of stability, critical phenomena and interfaces; 16. Interfaces; 17. Kinetics of transport processes; 18. Methods of modelling; 19. Modelling of disorder; 20. Mathematical modelling of solution phases; 21. Solution phases with sublattices; 22. Physical solution models.
£79.99
Taylor & Francis Ltd Nonlinear Mechanics for Composite Heterogeneous Structures
Book SynopsisNonlinear Mechanics for Composite Heterogeneous Structures applies both classical and multi-scale finite element analysis to the non-linear, failure response of composite structures. These traditional and modern computational approaches are holistically presented, providing insight into a range of non-linear structural analysis problems. The classical methods include geometric and material non-linearity, plasticity, damage and contact mechanics. The cutting-edge formulations include cohesive zone models, the Extended Finite Element Method (XFEM), multi-scale computational homogenization, localization of damage, neural networks and data-driven techniques. This presentation is simple but efficient, enabling the reader to understand, select and apply appropriate methods through programming code or commercial finite element software. The book is suitable for undergraduate studies as a final year textbook and for MSc and PhD studies in structural, mechanical, aerosTable of Contents1. Introduction. 2. Linear and Non-linear Finite Element Analysis. 3. Failure of Heterogeneous Materials Using Non-linear Continuum Laws. 4. Contact Mechanics. 5. The Extended Finite Element Method. 6. Homogenization. 7. Multi-scale Analysis for Composite Materials. 8. Data-driven Analysis. Appendix A. Matlab Codes on Numerical Modelling of Composite Heterogeneous Structures.
£155.00
John Wiley & Sons Inc Interfaces in Materials
Book SynopsisA thorough exploration of the atomic structures and properties ofthe essential engineering interfaces--an invaluable resourcefor students, teachers, and professionals The most up-to-date, accessible guide to solid-vapor,solid-liquid, and solid-solid phase transformations, thisinnovative book contains the only unified treatment of these threecentral engineering interfaces. Employing a simple nearest-neighborbroken-bond model, Interfaces in Materials focuses on metal alloysin a straightforward approach that can be easily extended to alltypes of interfaces and materials. Enhanced with nearly 300illustrations, along with extensive references and suggestions forfurther reading, this book provides: * A simple, cohesive approach to understanding the atomicstructure and properties of interfaces formed between solid,liquid, and vapor phases * Self-contained discussions of each interface--allowingseparate study of each phase transformation * A comparative look at the differeTable of ContentsINTRODUCTORY MATERIAL. Atomic Bonding. Regular Solution (Quasi-Chemical) Model. SOLID-VAPOR INTERFACES. Surface Energy. Surface Structure. Crystal Growth from the Vapor. Thermodynamics of Multicomponent Systems and SurfaceSegregation. Surface Films. SOLID-LIQUID INTERFACES. Liquids. Interfacial Structure and Energy. Crystal Growth from the Liquid. Solute Partitioning and Morphological Stability. SOLID-SOLID INTERFACES. Introduction to Solid-Solid Interfaces. Structure and Energy of Homophase Interfaces. Structure and Energy of Heterophase Interfaces. Growth of Solid-Solid Heterophase Interfaces. Morphological Stability and Segregation. References and Additional Reading. Appendices. Index.
£178.16
De Gruyter Wear of Composite Materials
£144.40
Wiley Design and Optimization of Laminated Composite Materials
Book SynopsisExpand your design horizons with a thorough, integrated knowledge of laminate mechanics and design optimization techniques Offering a thorough treatment of both contemporary design optimization techniques and the mechanics of composite laminates, Design and Optimization of Laminated Composite Materials broadens engineers'' design horizons by providing them with the information they need to take full advantage of this important class of composite materials. Intended to serve as an undergraduate- to graduate-level course text or a professional reference for practicing engineers, it features a rational, integrated presentation, supplemented with case examples, practice exercises, and valuable programming tips. Important features include: * An integrated approach to the analysis and design of laminated composites * Selected optimization methods that are suited to the design of laminates with discrete thickness and orientation angles * Guidelines on getting the most out of nTable of ContentsMechanics of Laminated Composite Materials. Hygrothermal Analysis of Laminated Composites. Laminate In-Plane Stiffness Design. Integer Programming Techniques. Failure Criteria for Laminated Composites. Strength Design of Laminates. Laminate Design for Flexural and Combined Response.
£118.76
John Wiley & Sons Inc Interface Interphase in Polymer Nanocomposites
Book SynopsisSignificant research has been done in polymeric nanocomposites and progress has been made in understanding nanofiller-polymer interface and interphase and their relation to nanocomposite properties. However, the information is scattered in many different publication media. This is the first book that consolidates the current knowledge on understanding, characterization and tailoring interfacial interactions between nanofillers and polymers by bringing together leading researchers and experts in this field to present their cutting edge research. Eleven chapters authored by senior subject specialists cover topics including: Thermodynamic mechanisms governing nanofiller dispersion, engineering of interphase with nanofillers Role of interphase in governing the mechanical, electrical, thermal and other functional properties of nanocomposites, characterization and modelling of the interphase Effects of crystallization on the interface, chemicalTable of Contents Preface xiii Part 1 Nanocomposite Interfaces/Interphases 1 Polymer Nanocomposite Interfaces: The Hidden Lever for Optimizing Performance in Spherical Nanofilled Polymers 3 Ying Li, Yanhui Huang, Timothy Krentz, Bharath Natarajan, Tony Neely and Linda S. Schadler 1.1 Introduction 4 1.1.1 Dispersion Control 5 1.1.2 Interface Structure 6 1.1.3 Interface Properties 6 1.1.4 Measuring and Modeling the Interface 7 1.2 Dispersion Control through Interfacial Modification 8 1.2.1 Introduction 8 1.2.2 Short Ligands 8 1.2.3 Polymer Brush 11 1.2.3.1 Polymer Brush Synthesis Methods 12 1.2.3.2 Enthalpic and Entropic Contributions of Polymer Brushes to Dispersion Control 13 1.3 Interface Structure 16 1.3.1 Introduction 16 1.3.2 Effects of Particle Size 17 1.3.3 Effects of Crystallinity and Crosslinking 18 1.3.4 Effects of Polymer Brush Penetration 19 1.3.4.1 The Athermal Case 19 1.3.4.2 The Enthalpic Case 21 1.3.5 Characterizing the Interface Structure 22 1.4 Interface Properties and Characterization Techniques 24 1.4.1 Introduction 24 1.4.2 Molecular Mobility in Nanocomposite Interfaces 25 1.4.3 Thermomechanical Properties and Measurements 28 1.4.3.1 Direct Measurement 30 1.4.3.2 Indirect Methods 32 1.4.4 Dielectric Properties and Measurements 40 1.4.4.1 Effects of Nanofillers 42 1.4.4.2 Measurement Techniques 43 1.4.4.3 Indirect Measurement 44 1.4.4.4 Finite Element Modeling 50 1.4.5 Remarks on Characterization Methods 52 1.5 Summary 53 Acknowledgements 54 References 55 2 Interphase Engineering with Nanofillers in Fiber-Reinforced Polymer Composites 71 József Karger-Kocsis, Sándor Kéki, Haroon Mahmood and Alessandro Pegoretti 2.1 Introduction 72 2.2 Interphase Tailoring for Stress Transfer 74 2.2.1 Coating with Nanofillers 74 2.2.2 Creation of Hierarchical Fibers 80 2.2.2.1 Chemical Grafting of Nanofillers 80 2.2.2.2 Chemical Vapor Deposition (CVD) 81 2.2.2.3 Other “Grafting” Techniques 83 2.2.3 Effects of Matrix Modification with Nanofillers 85 2.3 Interphase Tailoring for Functionality 87 2.3.1 Sensing/Damage Detection 87 2.3.2 Self-Healing/Repair 89 2.3.3 Damping 91 2.4 Outlook and Future Trends 91 2.5 Summary 93 2.6 Acknowledgements 93 2.7 Nomenclature 94 References 94 3 Formation and Functionality of Interphase in Polymer Nanocomposites 103 Peng-Cheng Ma, Bin Hao and Jang-Kyo Kim 3.1 Introduction 103 3.2 Formation of Interphase in Polymer Nanocomposites 105 3.3 Functionality of Interphase in Polymer Nanocomposites 111 3.3.1 Load Transfer in Nanocomposites 111 3.3.2 Reduction in Growth Rate of Fatigue Cracks in Nanocomposites 116 3.3.3 Controlling the Fracture Behavior of Nanocomposites 119 3.3.4 Enhancing the Damping Properties of Nanocomposites 121 3.3.5 Channels for the Transport of Ions and Moisture in Nanocomposites 123 3.3.6 Phonon Scattering in Nanocomposites 125 3.3.7 Electron Transfer in Nanocomposites 128 3.4 Summary and Prospects 130 Acknowledgements 133 References 133 4 Impact of Crystallization on the Interface in Polymer Nanocomposites 139 Nandika D’Souza Siddhi Pendse, Laxmi Sahu, Ajit Ranade and Shailesh Vidhate 4.1 Introduction 140 4.2 Thermodynamics of Crystallization 142 4.3 Nylon Nanocomposites 144 4.4 Dispersion of MLS in Nanocomposites 145 4.5 Effect of MLS on Thermal Transitions in Nylon 146 4.6 Permeability 149 4.7 PET Nanocomposites 151 4.8 Dispersion of MLS in Nanocomposites 151 4.9 Effect of MLS on Thermal Transitions in PET 151 4.10 PEN Nanocomposites 156 4.11 Dispersion of MLS in Nanocomposites 156 4.12 Effect of MLS on Thermal Transitions in PEN 157 4.13 Permeability 162 4.14 The Role of the Interface in Permeability: PET versus PEN 162 4.15 Summary 167 References 168 5 Improved Nanofiller-Matrix Bonding and Distribution in GnP-reinforced Polymer Nanocomposites by Surface Plasma Treatments of GnP 171 Rafael J. Zaldivar and Hyun I. Kim 5.1 Introduction 172 5.2 Experimental 173 5.2.1 Composite Fabrication 173 5.2.2 Image Analysis 174 5.2.3 Raman Spectroscopy 174 5.2.4 X-ray Photoelectron Spectroscopy (XPS) 174 5.2.5 Scanning Electron Microscopy (SEM) 175 5.2.6 Mechanical Testing 175 5.3 Results 175 5.4 Conclusions 187 Acknowledgement 187 References 187 6 Interfacial Effects in Polymer Nanocomposites Studied by Thermal and Dielectric Techniques 191 Panagiotis Klonos, Apostolos Kyritsis and Polycarpos Pissis 6.1 Introduction 192 6.2 Experimental Techniques 197 6.2.1 Differential Scanning Calorimetry (DSC) 197 6.2.2 Dielectric Techniques 202 6.2.2.1 Broadband Dielectric Spectroscopy (BDS) 203 6.2.2.2 Thermally Stimulated Depolarization Current (TSDC) Techniques 207 6.3 Evaluation in Terms of Interfacial Characteristics 209 6.3.1 Analysis of DSC Measurements 209 6.3.2 Analysis of Dielectric Measurements 211 6.3.3 Thickness of the Interfacial Layer 213 6.4 Examples 214 6.4.1 DSC Measurements 214 6.4.2 Dielectric Measurements 221 6.5 Prospects 235 6.6 Summary 236 Acknowledgements 237 References 237 Part 2 Techniques to Characterize/Control Nanoadhesion 7 Investigation of Interfacial Interactions between Nanofillers and Polymer Matrices Using a Variety of Techniques 251 Luqi Liu 7.1 Introduction 251 7.2 Observation of Interfacial Layer in Nanostructured Carbon Materials-based Nanocomposites 253 7.2.1 Characterization of Interface Layer Around CNTs 253 7.2.2 Characterization of Interface Layer Around Graphene Sheets 255 7.3 Interfacial Properties between Nanofiller and Polymer Matrix 256 7.3.1 Theoretical Simulations of CNT and/or Graphene-based Nanocomposites 256 7.3.1.1 Theoretical Simulation of CNT-based Nanocomposites 256 7.3.1.2 Theoretical Simulation of Graphene-based Nanocomposites 258 7.3.2 Experimental Studies to Characterize Interfacial Behavior in CNT and/or Graphene-based Nanocomposite Systems 260 7.3.2.1 Indirect Measurement 261 7.3.2.2 Direct Measurement 261 7.4 Summary 270 Acknowledgements 271 References 271 8 Chemical and Physical Techniques for Surface Modification of Nanocellulose Reinforcements 279 Viktoriya Pakharenko, Muhammad Pervaiz, Hitesh Pande and Mohini Sain 8.1 Introduction 279 8.2 Chemical Surface Modification 281 8.2.1 Acetylation 281 8.2.2 Silylation 284 8.2.3 Bacterial Treatment 285 8.2.4 Grafting 287 8.2.5 Surfactant Adsorption 289 8.2.6 TEMPO-mediated Oxidation 290 8.2.7 Click chemistry 292 8.3 Physical Surface Modification 292 8.3.1 Plasma 292 8.3.2 Corona 297 8.3.3 Laser 299 8.3.4 Flame 299 8.4 Use of Ions 300 8.5 Summary 300 Acknowledgments 301 References 301 9 Nondestructive Sensing of Interface/Interphase Damage in Fiber/Matrix Nanocomposites 307 Zuo-Jia Wang, Dong-Jun Kwon, Jin-Yeong Choi, Pyeong-Su Shin, K. Lawrence DeVries and Joung-Man Park 9.1 Introduction 308 9.2 Experimental Specimens and Methods 311 9.2.1 Gradient Specimen Test 311 9.2.2 Dual Matrix Fragmentation Test 314 9.3 Damage Sensing Using Electrical Resistance Measurements 317 9.3.1 Electrical Resistance Measurement for Strain Sensing Application 317 9.3.2 Electrical Resistance Measurement for Interface/Interphase Evaluation 321 9.4 Summary 327 References 327 10 Development of Polymeric Biocomposites: Particulate Incorporation, Interphase Generation and Evaluation by Nanoindentation 333 Oisik Das and Debes Bhattacharyya 10.1 Introduction 334 10.2 The Definitions of Composite and its Constituents 337 10.2.1 Composite 337 10.2.2 Biocomposite 337 10.2.3 The Reinforcement 337 10.2.4 The Matrix 338 10.3 Physical and Chemical Structures of Bio–based Reinforcements 339 10.3.1 Plant/Vegetable-based Reinforcements/Fibres 339 10.3.1.1 Physical Structure 339 10.3.1.2 Chemical Structure 339 10.3.2 Animal-based Reinforcements/Fibres 342 10.3.2.1 Physical Structure 342 10.3.2.2 Chemical Structure 343 10.4 Particulate and Short Fibre Composites 344 10.4.1 Biochar as Potential New Bio-based Particulate Reinforcement 345 10.4.2 Properties of Particulate-based Composites: Governing Factors 351 10.4.2.1 Particulate Properties 351 10.4.2.2 Particulate Structure 355 10.5 Nanoindentation Technique to Determine Interphase and Composite Properties 358 10.5.1 The Technique and Theory of Nanoindentation 358 10.5.1.1 Different Types of Indenter Tips 360 10.5.1.2 Nanoindentation Theory 362 10.5.1.3 Nanoindentation Instrument 364 10.5.2 Nanoindentation on Polymeric Composites and their Interphase 364 10.5 Concluding Remarks 369 References 370 11 Perspectives on the Use of Molecular Dynamics Simulations to Characterize Filler-Matrix Adhesion and Nanocomposite Mechanical Properties 375 Sanket A. Deshmukh, Benjamin J. Hanson, Qian Jiang and Melissa A. Pasquinelli 11.1 Introduction 376 11.2 Overview of Molecular Dynamics (MD) Simulations 377 11.3 Characterization of Interfacial Adhesion with MD Simulations 381 11.3.1 Quantifying Adhesion Strength 381 11.3.2 Effect of the Strength of Matrix-Filler Interactions 383 11.3.3 Effect of Filler Geometry 386 11.3.4 Effect of Ordering and Crosslinking within the Polymer Matrix 388 11.4 Characterization of Mechanical Properties with MD Simulations 391 11.4.1 Predicting Static Mechanical Properties 392 11.4.2 Predicting Dynamic Mechanical Properties 395 11.5 Prospects 399 11.6 Summary 400 Acknowledgements 400 References 400
£152.06
John Wiley & Sons Inc Dynamic Behavior of Materials
Book SynopsisAddresses fundamentals and advanced topics relevant to the behavior of materials under in-service conditions such as impact, shock, stress and high-strain rate deformations. Deals extensively with materials from a microstructure perspective which is the future direction of research today.Table of ContentsDynamic Deformation and Waves. Elastic Waves. Plastic Waves. Shock Waves. Shock Waves: Equations of State. Differential Form of Conservation Equations and Numerical Solutionsto More Complex Problems. Shock Wave Attenuation, Interaction, and Reflection. Shock Wave-Induced Phase Transformations and ChemicalChanges. Explosive-Material Interactions. Detonation. Experimental Techniques: Diagnostic Tools. Experimental Techniques: Methods to Produce DynamicDeformation. Plastic Deformation at High Strain Rates. Plastic Deformation in Shock Waves. Shear Bands (Thermoplastic Shear Instabilities). Dynamic Fracture. Applications. Indexes.
£175.46
Taylor & Francis Ltd Phase Change MaterialBased Heat Sinks A MultiObjective Perspective
Book SynopsisPhase-change Material based heat sinks and associated optimization remains a topic of great interest, as evident from the increasing number of citations and new applications and miniaturization. Often the multi objective perspective of such heat sinks is ignored. This book introduces the readers to the PCM based heat sinks and Multi objective optimization. The authors have also included interesting in house experimental results on the Rotating heat sinks which is a first of a kind work. Useful to budding thermal researchers and practicing engineers in the field, this book is also a great start for students to understand the cooling applications in electronics and an asset to every library in a technical university. Since this book not only gives a critical review of the state of the art but also presents the authors'' own results. The book will encourage, motivate and let the reader consider pursuing a research career in electronic cooling technologies.Trade ReviewAn interesting book for researchers involved with designing heat sinks for electronics, especially high-power electronics (e.g. Si, SiC or GaN) power semiconductors since many of the applications that use these devices are limited by the device temperature during transient overcurrent. PCM may be able to extend the current range of many of these devices and lead to even higher current ratings, especially for wideband gap materials since they have a higher operating temperature rating than Si-based devices.- IEEE Electrical Insulation Magazine, January / February — Vol. 37, No. 1Table of ContentsPreface. List of Figures. List of Tables. Symbols. Notations. Introduction. Review of literature. Characterization of PCM And TCEs. Experimental Setup and Instrumentation. Experimental Investigations on 72 Pin Fin Heat Sink with Discrete Heating. Multi-Objective Optimization Algorithms For 72 Pin Fin Heat Sinks. Multi-Objective Geometric Optimization of a PCM Based Matrix Type Composite Heat Sink. Experimental Investigation on Melting And Solidification of Phase Change Material Based Cylindrical Heat Sinks. Thermosyphon Assisted Melting of PCM Inside A Rectangular Enclosure :A Synergistic Numerical Approach. Conclusions and Scope for Future Work. Bibliography.
£81.99
Springer State of the Art and Future Trends in Materials
Book SynopsisPreface.- 1 Damage Behavior in Additive Manufacturing based on Infill Pattern and Density with Carbon Particle Filled PolyLactic Acid (CF-PLA) Polymer Filaments.- 2 Advanced Mathematical Modeling of Moisture Transport in Polymer Composite Materials: State-of-the-Art and Numerical Computation.- 3 Natural Vibration and Stability of Prestressed Cylindrical Shells Containing Fluid.- 4 Creep and Fretting Wear Modelling for Rod-Cylinder Periodical Contacts.- 5 Influence of UV Irradiation on the Tensile Properties of Titanium Dioxide Composites for the Selective Laser Sintering Process.- 6 Ellipticity and Hyperbolicity Within Nonlinear Strain Gradient Elasticity: 1D Case.- 7 Dispersive and Dissipative Effects During the Propagation of Plane Shear Waves in Plates which Interact with Linear Elastic and Nonlinear Elastic Foundations.- 8 Effective Properties of Micropolar Laminated Media Under the Influence of Constitutive Property Rotation.- 9 Torsion o
£134.99
Taylor & Francis Inc Mechanics of Composite Materials
Book SynopsisIn 1997, Dr. Kaw introduced the first edition of Mechanics of Composite Materials, receiving high praise for its comprehensive scope and detailed examples. He also introduced the groundbreaking PROMAL software, a valuable tool for designing and analyzing structures made of composite materials. Updated and expanded to reflect recent advances in the field, this Second Edition retains all of the features -- logical, streamlined organization; thorough coverage; and self-contained treatment -- that made the first edition a bestseller.The book begins with a question-and-answer style introduction to composite materials, including fresh material on new applications. The remainder of the book discusses macromechanical analysis of both individual lamina and laminate materials; micromechanical analysis of lamina including elasticity based models; failure, analysis, and design of laminates; and symmetrical and nonsymmetrical beams (new chapter). NeTable of ContentsIntroduction to Composite Materials. Macromechanical Analysis of a Lamina. Appendix A: Matrix Algebra. Appendix B: Transformation of Stresses and Strains. Micromechanical Analysis of a Lamina. Macromechanical Analysis of Laminates. Failure, Analysis, and Design of Laminates. Bending of Beams. Index.
£115.00
Oxford University Press Inc Engineering Mechanics of Composite Materials
Book SynopsisEngineering Mechanics of Composite Materials, 2/e analyzes the behavior and properties of composite materials--rigid, high-strength, lightweight components that can be used in infrastructure, aircraft, automobiles, biomedical products, and a myriad of other goods. This edition features additional exercises and new material based on the author''s research and advances in the field.
£214.69
Cambridge University Press Damage and Failure of Composite Materials
Book SynopsisUnderstanding damage and failure of composite materials is critical for reliable and cost-effective engineering design. Bringing together materials mechanics and modeling, this book provides a complete guide to damage, fatigue and failure of composite materials. Early chapters focus on the underlying principles governing composite damage, reviewing basic equations and mechanics theory, before describing mechanisms of damage such as cracking, breakage and buckling. In subsequent chapters, the physical mechanisms underlying the formation and progression of damage under mechanical loads are described with ample experimental data, and micro- and macro-level damage models are combined. Finally, fatigue of composite materials is discussed using fatigue-life diagrams. While there is a special emphasis on polymer matrix composites, metal and ceramic matrix composites are also described. Outlining methods for more reliable design of composite structures, this is a valuable resource for engineerTrade Review'… a welcome addition to the literature. Numerous books treat separately the mechanics of composites and failure of materials: very few combine them together and in such a coherent and comprehensive manner.' Ettore Barbiei, The Aeronautical JournalTable of Contents1. Durability assessment of composite structures; 2. Review of mechanics of composite materials; 3. Damage in composite materials; 4. Micro damage mechanics; 5. Macro damage mechanics; 6. Damage progression; 7. Damage mechanisms and fatigue-life diagrams; 8. Future directions; Index.
£118.00
Cambridge University Press Evolution of Phase Transitions
Book SynopsisThis 2006 study will be of interest to those interested in the development and application of continuum-mechanical models that describe the macroscopic response of materials capable of undergoing stress- or temperature-induced transitions between two solid phases.Trade ReviewReview of the hardback: 'Wherever possible, Abeyaratne and Knowles connect phenomenological and experimental results. Aside from comparisons between analytical predictions and experiments on shape-memory wires, the authors use their framework to model experiments involving phase transformations induced by high-speed impact. To some extent, links between atomistic and continuum models for kinetics are also explored. This book is a unique, valuable, and elegantly written contribution to the literature on phase transformations. It should be included in the library of any mechanician, applied mathematician, or material scientist interested in martensitic alloys. Others working on broader classes of phase transformations will also find this book to be worthwhile reading. It is physically well-motivated, mathematically sound, and eminently clear.' Theoretical and Computational Fluid DynamicsTable of ContentsPart I. Introduction: 1. What this monograph is about; 2. Some experiments; 3. Continuum mechanics; 4. Quasilinear systems; 5. Outline of monograph; Part II. Two-Well Potentials, Governing Equations and Energetics: 1. Introduction; 2. Two-phase nonlinearly elastic materials; 3. Field equations and jump conditions; 4. Energetics of motion, driving force and dissipation inequality; Part III. Equilibrium Phase Mixtures and Quasistatic Processes: 1. Introduction; 2. Equilibrium states; 3. Variational theory of equilibrium mixtures of phases; 4. Quasistatic processes; 5. Nucleation and kinetics; 6. Constant elongation rate processes; 7. Hysteresis; Part IV. Impact-Induced Transitions in Two-Phase Elastic Materials: 1. Introduction; 2. The impact problem for trilinear two-phase materials; 3. Scale-invariant solutions of the impact problem; 4. Nucleation and kinetics; 5. Comparison with experiment; 6. Other types of kinetic relations; 7. Related work; Part V. Multiple-Well Free Energy Potentials: 1. Introduction; 2. Helmholtz free energy potential; 3. Potential energy function and the effect of stress; 4. Example 1: the van der Waals fluid; 5. Example 2: two-phase martensitic material with cubic and tetragonal phases; Part VI. The Continuum Theory of Driving Force: 1. Introduction; 2. Balance laws, field equations and jump conditions; 3. The second law of thermodynamics and the driving force; Part VII. Thermoelastic Materials: 1. Introduction; 2. The thermoelastic constitutive law; 3. Stability of a thermoelastic material; 4. A one-dimensional special case: uniaxial strain; Part VIII. Kinetics and Nucleation: 1. Introduction; 2. Nonequilibrium processes, thermodynamic fluxes and forces, kinetic relation; 3. Phenomenological examples of kinetic relations; 4. Micromechanically-based examples of kinetic relations; 5. Nucleation; Part IX. Models for Two-Phase Thermoelastic Materials in One Dimension: 1. Preliminaries; 2. Materials of Mie-Gruneisen type; 3. Two-phase Mie-Gruneisen materials; Part X. Quasistatic Hysteresis in Two-Phase Thermoelastic Tensile Bars: 1. Preliminaries; 2. Thermomechanical equilibrium states for a two-phase material; 3. Quasistatic processes; 4. Trilinear thermoelastic material; 5. Stress cycles at constant temperature; 6. Temperature cycles at constant stress; 7. The shape-memory cycle; 8. The experiments of Shaw and Kyriakides; 9. Slow thermomechanical processes; Part XI. Dynamics of Phase Transitions in Uniaxially Strained Thermoelastic Solids: 1. Introduction; 2. Uniaxial strain in adiabatic thermoelasticity; 3. The impact problem; Part XII. Statics: Geometric Compatibility: 1. Preliminaries; 2. Examples; Part XIII. Dynamics: Impact-Induced Transition in a CuA1Nl Single Crystal: 1. Introduction; 2. Preliminaries; 3. Impact without phase transformation; 4. Impact with phase transformation; 5. Application to austenite-B1 martensite transformation in CuA1Nl; Part XIV. Quasistatics: Kinetics of Martensitic Twinning: 1. Introduction; 2. The material and loading device; 3. Observations; 4. The model; 5. The energy of the system; 6. The effect of the transition layers: further observations; 7. The effect of the transition layers: further modeling; 8. Kinetics.
£125.00
Cambridge University Press Fatigue of Materials 2ed Cambridge Solid State
Book SynopsisFatigue failures occur in a broad range of engineering applications. This book provides the first comprehensive and integrated account of the science of fatigue in metals, non-metals and composites. The book includes mechanics, micromechanisms, example problems, practice problems and industrial case studies of fatigue deformation and failures.Trade Review'… the second edition is even better, as it has been expanded with coverage of new topics, and includes worked examples, case studies of fatigue failures and applications in life prediction, as well as sample problems at the end of sections … an excellent textbook for practising engineers … This is a highly recommended book which would now be a useful introductory reference across the whole spectrum of researchers and engineers working on fatigue problems and life prediction.' Neil James, International Journal of Fatigue'The phenomenon of fatigue plagues materials of every kind in a host of applications, and Professor Suresh's treatise is similarly wide ranging.' Contemporary PhysicsTable of ContentsPreface; 1. Introduction and overview; Part I. Cyclic Deformation and Fatigue Crack Initiation: 2. Cyclic deformation in ductile single crystals; 3. Cyclic deformation in polycrystalline ductile solids; 4. Fatigue crack initiation in ductile solids; 5. Cyclic deformation and crack initiation in brittle solids; 6. Cyclic deformation and crack initiation in noncrystalline solids; Part II. Total-Life Approaches: 7. Stress-life approach; 8. Strain-life approach; Part III. Damage-Tolerant Approach: 9. Fracture mechanics and its implications for fatigue; 10. Fatigue crack growth in ductile solids; 11. Fatigue crack growth in brittle solids; 12. Fatigue crack growth in noncrystalline solids; Part IV. Advanced Topics: 13. Contact fatigue: sliding, rolling and fretting; 14. Retardation and transients in fatigue crack growth; 15. Small fatigue cracks; 16. Environmental interactions: corrosion-fatigue and creep-fatigue; Appendix; References; Indexes.
£72.99
John Wiley & Sons Inc Design and Analysis of Composite Structures for
Book SynopsisA design reference for engineers developing composite components for automotive chassis, suspension, and drivetrain applications This book provides a theoretical background for the development of elements of car suspensions. It begins with a description of the elastic-kinematics of the vehicle and closed form solutions for the vertical and lateral dynamics. It evaluates the vertical, lateral, and roll stiffness of the vehicle, and explains the necessity of the modelling of the vehicle stiffness. The composite materials for the suspension and powertrain design are discussed and their mechanical properties are provided. The book also looks at the basic principles for the design optimization using composite materials and mass reduction principles. Additionally, references and conclusions are presented in each chapter. Design and Analysis of Composite Structures for Automotive Applications: Chassis and Drivetrain offers complete coverage of chassis componentsTable of ContentsForeword xiii Series Preface xv List of Symbols and Abbreviations xvii Introduction xxiii About the Companion Website xxxv 1 Elastic Anisotropic Behavior of Composite Materials 1 1.1 Anisotropic Elasticity of Composite Materials 1 1.1.1 Fourth Rank Tensor Notation of Hooke’s Law 1 1.1.2 Voigt’s Matrix Notation of Hooke’s Law 2 1.1.3 Kelvin’s Matrix Notation of Hooke’s Law 5 1.2 Unidirectional Fiber Bundle 7 1.2.1 Components of a Unidirectional Fiber Bundle 7 1.2.2 Elastic Properties of a Unidirectional Fiber Bundle 7 1.2.3 Effective Elastic Constants of Unidirectional Composites 8 1.3 Rotational Transformations of Material Laws, Stress and Strain 10 1.3.1 Rotation of Fourth Rank Elasticity Tensors 11 1.3.2 Rotation of Elasticity Matrices in Voigt’s Notation 11 1.3.3 Rotation of Elasticity Matrices in Kelvin’s Notation 13 1.4 Elasticity Matrices for Laminated Plates 14 1.4.1 Voigt’s Matrix Notation for Anisotropic Plates 14 1.4.2 Rotation of Matrices in Voigt’s Notation 15 1.4.3 Kelvin’s Matrix Notation for Anisotropic Plates 15 1.4.4 Rotation of Matrices in Kelvin’s Notation 16 1.5 Coupling Effects of Anisotropic Laminates 17 1.5.1 Orthotropic Laminate Without Coupling 17 1.5.2 Anisotropic Laminate Without Coupling 17 1.5.3 Anisotropic Laminate With Coupling 17 1.5.4 Coupling Effects in Laminated Thin-Walled Sections 18 1.6 Conclusions 18 References 19 2 Phenomenological Failure Criteria of Composites 21 2.1 Phenomenological Failure Criteria 21 2.1.1 Criteria for Static Failure Behavior 21 2.1.2 Stress Failure Criteria for Isotropic Homogenous Materials 21 2.1.3 Phenomenological Failure Criteria for Composites 22 2.1.4 Phenomenological Criteria Without Stress Coupling 23 2.1.4.1 Criterion of Maximum Averaged Stresses 23 2.1.4.2 Criterion of Maximum Averaged Strains 24 2.1.5 Phenomenological Criteria with Stress Coupling 24 2.1.5.1 Mises–Hill Anisotropic Failure Criterion 24 2.1.5.2 Pressure-Sensitive Mises–Hill Anisotropic Failure Criterion 26 2.1.5.3 Tensor-Polynomial Failure Criterion 27 2.1.5.4 Tsai–Wu Criterion 30 2.1.5.5 Assessment of Coefficients in Tensor-Polynomial Criteria 30 2.2 Differentiating Criteria 33 2.2.1 Fiber and Intermediate Break Criteria 33 2.2.2 Hashin Strength Criterion 33 2.2.3 Delamination Criteria 35 2.3 Physically Based Failure Criteria 35 2.3.1 Puck Criterion 35 2.3.2 Cuntze Criterion 36 2.4 Rotational Transformation of Anisotropic Failure Criteria 37 2.5 Conclusions 40 References 40 3 Micromechanical Failure Criteria of Composites 45 3.1 Pullout of Fibers from the Elastic-Plastic Matrix 45 3.1.1 Axial Tension of Fiber and Matrix 45 3.1.2 Shear Stresses in Matrix Cylinders 51 3.1.3 Coupled Elongation of Fibers and Matrix 53 3.1.4 Failures in Matrix and Fibers 54 3.1.4.1 Equations for Mean Axial Displacements of Fibers and Matrix 54 3.1.4.2 Solutions of Equations for Mean Axial Displacements of Fibers and Matrix 56 3.1.5 Rupture of Matrix and Pullout of Fibers from Crack Edges in a Matrix 57 3.1.5.1 Elastic Elongation (Case I) 57 3.1.5.2 Plastic Sliding on the Fiber Surface (Case II) 58 3.1.5.3 Fiber Breakage (Case III) 58 3.1.6 Rupture of Fibers, Matrix Joints and Crack Edges 59 3.2 Crack Bridging in Elastic-Plastic Unidirectional Composites 60 3.2.1 Crack Bridging in Unidirectional Fiber-Reinforced Composites 60 3.2.2 Matrix Crack Growth 61 3.2.3 Fiber Crack Growth 62 3.2.4 Penny-Shaped Crack 65 3.2.4.1 Crack in a Transversal-Isotropic Medium 65 3.2.4.2 Mechanisms of the Fracture Process 66 3.2.4.3 Crack Bridging in an Orthotropic Body With Disk Crack 66 3.2.4.4 Solution to an Axially Symmetric Crack Problem 68 3.2.5 Plane Crack Problem 72 3.2.5.1 Equations of the Plane Crack Problem 72 3.2.5.2 Solution to the Plane Crack Problem 74 3.3 Debonding of Fibers in Unidirectional Composites 75 3.3.1 Axial Deformation of Unidirectional Fiber Composites 75 3.3.2 Stresses in Unidirectional Composite in Cases of Ideal Debonding or Adhesion 79 3.3.2.1 Equations of an Axially Loaded Unidirectional Compound Medium (A) 79 3.3.2.2 Total Debonding (B) 82 3.3.2.3 Ideal Adhesion (C) 83 3.3.3 Stresses in a Unidirectional Composite in a Case of Partial Debonding 84 3.3.3.1 Partial Radial Load on the Fiber Surface 84 3.3.3.2 Partial Radial Load on the Matrix Cavity Surface 84 3.3.3.3 Partial Debonding With Central Adhesion Region (D) 85 3.3.3.4 Partial Debonding With Central Debonding Region (E) 88 3.3.3.5 Semi-Infinite Debonding With Central Debonding Region (F) 89 3.3.4 Contact Problem for a Finite Adhesion Region 89 3.3.5 Debonding of a Semi-Infinite Adhesion Region 93 3.3.6 Debonding of Fibers from a Matrix Under Cyclic Deformation 95 3.4 Conclusions 98 References 98 4 Optimization Principles for Structural Elements Made of Composites 105 4.1 Stiffness Optimization of Anisotropic Structural Elements 105 4.1.1 Optimization Problem 105 4.1.2 Optimality Conditions 106 4.1.3 Optimal Solutions in Anti-Plane Elasticity 109 4.1.4 Optimal Solutions in Plane Elasticity 109 4.2 Optimization of Strength and Loading Capacity of Anisotropic Elements 110 4.2.1 Optimization Problem 110 4.2.2 Optimality Conditions 113 4.2.3 Optimal Solutions in Anti-Plane Elasticity 114 4.2.4 Optimal Solutions in Plane Elasticity 114 4.3 Optimization of Accumulated Elastic Energy in Flexible Anisotropic Elements 116 4.3.1 Optimization Problem 116 4.3.2 Optimality Conditions 117 4.3.3 Optimal Solutions in Anti-Plane Elasticity 118 4.3.4 Optimal Solutions in Plane Elasticity 119 4.4 Optimal Anisotropy in a Twisted Rod 119 4.5 Optimal Anisotropy of Bending Console 122 4.6 Optimization of Plates in Bending 123 4.7 Conclusions 125 References 125 5 Optimization of Composite Driveshaft 129 5.1 Torsion of Anisotropic Shafts With Solid Cross-Sections 129 5.2 Thin-Walled Anisotropic Driveshaft with Closed Profile 132 5.2.1 Geometry of Cross-Section 132 5.2.2 Main Kinematic Hypothesis 133 5.3 Deformation of a Composite Thin-Walled Rod 135 5.3.1 Equations of Deformation of a AnisotropicThin-Walled Rod 135 5.3.2 Boundary Conditions 138 5.3.2.1 Ideal Fixing 138 5.3.2.2 Ideally Free End 138 5.3.2.3 Boundary Conditions of the Intermediate Type 140 5.3.3 Governing Equations in Special Cases of Symmetry 140 5.3.3.1 Orthotropic Material 140 5.3.3.2 Constant Elastic Properties Along the Arc of a Cross-Section 140 5.3.4 Symmetry of Section 140 5.4 Buckling of Composite Driveshafts Under a Twist Moment 141 5.4.1 Greenhill’s Buckling of Driveshafts 141 5.4.2 Optimal Shape of the Solid Cross-Section for Driveshaft 143 5.4.3 Hollow Circular and Triangular Cross-Sections 144 5.5 Patents for Composite Driveshafts 146 5.6 Conclusions 150 References 150 6 Dynamics of a Vehicle with Rigid Structural Elements of Chassis 155 6.1 Classification of Wheel Suspensions 155 6.1.1 Common Designs of Suspensions 155 6.1.2 Types of Twist-Beam Axles 156 6.1.3 Kinematics of Wheel Suspensions 157 6.2 Fundamental Models in Vehicle Dynamics 159 6.2.1 Basic Variables of Vehicle Dynamics 159 6.2.2 Coordinate Systems of Vehicle and Local Coordinate Systems 161 6.2.2.1 Earth-Fixed Coordinate System 161 6.2.2.2 Vehicle-Fixed Coordinate System 162 6.2.2.3 Horizontal Coordinate System 162 6.2.2.4 Wheel Coordinate System 162 6.2.3 Angle Definitions 162 6.2.4 Components of Force and Moments in Car Dynamics 163 6.2.5 Degrees of Freedom of a Vehicle 163 6.3 Forces Between Tires and Road 167 6.3.1 Tire Slip 167 6.3.2 Side Slip Curve and Lateral Force Properties 168 6.4 Dynamic Equations of a Single-Track Model 170 6.4.1 Hypotheses of a Single-Track Model 170 6.4.2 Moments and Forces in a Single-Track Model 171 6.4.3 Balance of Forces and Moments in a Single-Track Model 173 6.4.4 Steady Cornering 174 6.4.4.1 Necessary Steer Angle for Steady Cornering 174 6.4.4.2 Yaw Gain Factor and Steer Angle Gradient 175 6.4.4.3 Classification of Self-Steering Behavior 176 6.4.5 Non-Steady Cornering 179 6.4.5.1 Equations of Non-Stationary Cornering 179 6.4.5.2 Oscillatory Behavior of Vehicle During Non-Steady Cornering 180 6.4.6 Anti-Roll Bars Made of Composite Materials 181 6.5 Conclusions 182 References 182 7 Dynamics of a Vehicle With Flexible, Anisotropic Structural Elements of Chassis 183 7.1 Effects of Body and Chassis Elasticity on Vehicle Dynamics 183 7.1.1 Influence of Body Stiffness on Vehicle Dynamics 183 7.1.2 Lateral Dynamics of Vehicles With Stiff Rear Axles 184 7.1.3 Induced Effects on Wheel Orientation and Positioning of Vehicles with Flexible Rear Axle 185 7.2 Self-Steering Behavior of a Vehicle With Coupling of Bending and Torsion 188 7.2.1 Countersteering for Vehicles with Twist-Beam Axles 188 7.2.1.1 Countersteering Mechanisms 188 7.2.1.2 Countersteering by Anisotropic Coupling of Bending and Torsion 190 7.2.2 Bending-Twist Coupling of a Countersteering Twist-Beam Axle 192 7.2.3 Roll Angle of Vehicle 193 7.2.3.1 Relationship Between Roll Angle and Centrifugal Force 193 7.2.3.2 Lateral Reaction Forces on Wheels 193 7.2.3.3 Steer Angles on Front Wheels 194 7.2.3.4 Steer Angles on Rear Wheels 194 7.3 Steady Cornering of a Flexible Vehicle 196 7.3.1 Stationary Cornering of a Car With a Flexible Chassis 196 7.3.2 Necessary Steer Angles for Coupling and Flexibility of Chassis 196 7.3.2.1 Limit Case: Lateral Acceleration Vanishes 196 7.3.2.2 Absolutely Rigid Front and Rear Wheel Suspensions 197 7.3.2.3 Bending and Torsion of a Twist Member Completely Decoupled 197 7.3.2.4 General Case of Coupling Between Bending and Torsion of a Twist Member 198 7.3.2.5 Neutral Steering Caused by Coupling Between Bending and Torsion of a Twist Member 198 7.4 Estimation of Coupling Constant for a Twist Member 199 7.4.1 Coupling Between Vehicle Roll Angle and Twist of Cross-Member 199 7.4.2 Stiffness Parameters of a Twist-Beam Axle 200 7.4.2.1 Roll Spring Rate 200 7.4.2.2 Lateral Stiffness 201 7.4.2.3 Camber Stiffness 203 7.5 Design of the Countersteering Twist-Beam Axle 203 7.5.1 Requirements for a Countersteering Twist-Beam Axle 203 7.5.2 Selection and Calculation of the Cross-Section for the Cross-Member 205 7.5.3 Elements of a Countersteering Twist-Beam Axle 208 7.6 Patents on Twist-Beam Axles 211 7.7 Conclusions 214 References 214 8 Design and Optimization of Composite Springs 217 8.1 Design and Optimization of Anisotropic Helical Springs 217 8.1.1 Forces and Moments in Helical Composite Springs 217 8.1.2 Symmetrically Designed Solid Bar With Circular Cross-Section 220 8.1.3 Stiffness and Stored Energy of Helical Composite Springs 223 8.1.4 Spring Rates of Helical Composite Springs 225 8.1.5 Helical Composite Springs of Minimal Mass 228 8.1.5.1 Optimization Problem 228 8.1.5.2 Optimal Composite Spring for the Anisotropic Mises–Hill Strength Criterion 228 8.1.6 Axial and Twist Vibrations of Helical Springs 231 8.2 Conical Springs Made of Composite Material 233 8.2.1 Geometry of an Anisotropic Conical Spring in an Undeformed State 233 8.2.2 Curvature and Strain Deviations 235 8.2.3 Thin-Walled Conical Shells Made of Anisotropic Materials 236 8.2.4 Variation Principle 237 8.2.5 Structural Optimization of a Conical Spring Due to Ply Orientation 239 8.2.6 Conical Spring Made of Orthotropic Material 241 8.2.7 Bounds for Stiffness of a Spring Made of Orthotropic Material 243 8.3 Alternative Concepts for Chassis Springs Made of Composites 244 8.4 Conclusions 248 References 249 9 Equivalent Beams of Helical Anisotropic Springs 255 9.1 Helical Compression Springs Made of Composite Materials 255 9.1.1 Statics of the Equivalent Beam for an Anisotropic Spring 255 9.1.2 Dynamics of an Equivalent Beam for an Anisotropic Spring 258 9.2 Transverse Vibrations of a Composite Spring 260 9.2.1 Separation of Variables 260 9.2.2 Fundamental Frequencies of Transversal Vibrations 262 9.2.3 Transverse Vibrations of a Symmetrically Stacked Helical Spring 264 9.3 Side Buckling of a Helical Composite Spring 265 9.3.1 Buckling Under Axial Force 265 9.3.2 Simplified Formulas for Buckling of a Symmetrically Stacked Helical Spring 266 9.4 Conclusions 267 References 267 10 Composite Leaf Springs 269 10.1 Longitudinally Mounted Leaf Springs for Solid Axles 269 10.1.1 Predominantly Bending-Loaded Leaf Springs 269 10.1.2 Moments and Forces of Leaf Springs in a Pure Bending State 270 10.1.3 Optimization of Leaf Springs for an Anisotropic Mises–Hill Criterion 272 10.2 Leaf-Tension Springs 275 10.2.1 Combined Bending and Tension of a Spring 275 10.2.2 Forces and Rates of Leaf-Tension Springs 277 10.3 Transversally Mounted Leaf Springs 278 10.3.1 Axle Concepts of Transverse Leaf Springs 278 10.3.2 Analysis of a Transverse Leaf Spring 280 10.3.3 Examples and Patents for Transversely Mounted Leaf Springs 283 10.4 Conclusions 286 References 287 11 Meander-Shaped Springs 289 11.1 Meander-Shaped Compression Springs for Automotive Suspensions 289 11.1.1 Bending Stress State of Corrugated Springs 289 11.1.2 “Equivalent Beam” of a Meander Spring 292 11.1.3 Axial and Lateral Stiffness of Corrugated Springs 292 11.1.4 Effective Spring Constants of Meander and Coil Springs for Bending and Compression 293 11.2 Multiarc-Profiled Spring Under Axial Compressive Load 294 11.2.1 Multiarc Meander Spring With Constant Cross-Section 294 11.2.2 Multiarc Meander Spring With Optimal Cross-Section 297 11.2.3 Comparison of Masses for Fixed Spring Rate and Stress 298 11.3 Sinusoidal Spring Under Compressive Axial Load 299 11.3.1 Sinusoidal Meander Spring With Constant Cross-Section 299 11.3.2 Sinusoidal Meander Spring With Optimal Cross-Section 301 11.3.3 Comparison of Masses for Fixed Spring Rate and Stress 302 11.4 Bending Stiffness of Meander Spring With a Constant Cross-Section 303 11.4.1 Bending Stiffness of a Multiarc Meander Spring With a Constant Cross-Section 303 11.4.2 Bending Stiffness of a Sinusoidal Meander Spring with a Constant Cross-Section 303 11.5 Stability of Corrugated Springs 304 11.5.1 Euler’s Buckling of an Axially Compressed Rod 304 11.5.2 Side Buckling of Meander Springs 306 11.6 Patents for Chassis Springs Made of Composites in Meandering Form 307 11.7 Conclusions 314 References 315 12 Hereditary Mechanics of Composite Springs and Driveshafts 317 12.1 Elements of Hereditary Mechanics of Composite Materials 317 12.1.1 Mechanisms of Time-Dependent Deformation of Composites 317 12.1.2 Linear Viscoelasticity of Composites 318 12.1.3 Nonlinear Creep Mechanics of Anisotropic Materials 319 12.1.4 Anisotropic Norton–Bailey Law 321 12.2 Creep and Relaxation of Twisted Composite Shafts 322 12.2.1 Constitutive Equations for Relaxation in Torsion of Anisotropic Shafts 322 12.2.2 Torque Relaxation for an Anisotropic Norton–Bailey Law 322 12.3 Creep and Relaxation of Composite Helical Coiled Springs 323 12.3.1 Compression and Tension Composite Springs 323 12.3.2 Relaxation of Helical Composite Springs 324 12.3.3 Creep of Helical Composite Compression Springs 324 12.4 Creep and Relaxation of Composite Springs in a State of Pure Bending 325 12.4.1 Constitutive Equations for Bending Relaxation 325 12.4.2 Relaxation of the Bending Moment for the Anisotropic Norton–Bailey Law 326 12.4.3 Creep in a State of Bending 326 12.5 Conclusions 327 References 327 Appendix A Mechanical Properties of Composites 331 A.1 Fibers 331 A.1.1 Glass Fibers 331 A.1.2 Carbon Fibers 331 A.1.3 Aramid Fibers 331 A.2 Physical Properties of Resin 332 A.3 Laminates 334 A.3.1 Unidirectional Fiber-Reinforced Composite Material 334 A.3.2 Fabric 334 A.3.3 Non-Woven Fabric 334 References 335 Appendix B Anisotropic Elasticity 337 B.1 Elastic Orthotropic Body 337 B.2 Distortion Energy and Supplementary Energy 338 B.3 Plane Elasticity Problems 339 B.3.1 Plane Strain State 339 B.3.2 Plane Stress State 339 B.4 Generalized Airy Stress Function 340 B.4.1 Plane Stress State 340 B.4.2 Plane Strain State 340 B.4.3 Rotationally Symmetric Elasticity Problems 340 Appendix C Integral Transforms in Elasticity 343 C.1 One-Dimensional Integral Transform 343 C.2 Two-Dimensional Fourier Transform 344 C.3 Potential Functions for Plane Elasticity Problems 344 C.4 Rotationally Symmetric, Spatial Elasticity Problems 346 C.5 Application of the Fourier Transformation to Plane Elasticity Problems 348 C.6 Application of the Hankel Transformation to Spatial, Rotation-Symmetric Elasticity Problems 349 Index 351
£104.36
Cambridge University Press Mechanics of Composite Structures
Book SynopsisAn increase in the use of composite materials has led to a greater demand for engineers versed in the design of structures made from such materials. This book demonstrates advanced concepts and emphasises structures. More than 300 illustrations, 50 fully worked problems, and material properties data sets are included.Trade ReviewReview of the hardback: 'This book will be useful to graduate students, researchers and engineers seeking to learn more about the mechanics of composites and the applications of composite materials.' Engineering DesignerTable of ContentsPreface; List of symbols; 1. Introduction; 2. Displacements, strains, stresses; 3. Laminated composites; 4. Thin plates; 5. Sandwich plates; 6. Beams; 7. Beams with shear deformation; 8. Shells; 9. Finite element analysis; 10. Failure criteria; 11. Micromechanics; Appendix A. Cross-sectional properties of thin-walled composite beams; Appendix B. Buckling loads and natural frequencies of orthotropic beams with shear deformation; Appendix C. Typical material properties; Index.
£155.00
Springer Recent Advances in Composite Materials and Structures Volume 1
Book SynopsisEffect of Wing Attachment Bolts on the Drooping Phenomenon in CFRP Composite Aircraft Wing.- Review of Nanocarbon Tubes and Nanomaterials Engineering Industry.- Effect of MWCNT on Basalt Fibre-Reinforced Polymer composite at elevated.- temperatures.- Numerical modeling of damage behavior in unidirectional Carbon/Carbon composites.- Seismic performance-based assessment of Concrete Bridge piers reinforced with Fe-based SMA bars.- Effect of interfacial VACNT on the transverse deformation of antisymmetric angle-ply composite laminates.- Enhancing compressive strength of aluminum composite through stir casting technique with TiO2/BN reinforcement .- Study microstructural characteristic and mechanical behavior of bimodal hybrid TiO2np-SiCp/Al6082 composites fabricated by stir-squeeze casting.- Powder metallurgy processing of Al-HEA composite: Microstructure and mechanical characteristics.- Investigation of sandwich plates subjected to low-velocity impact.
£296.99
Taylor & Francis Ltd Composite Materials HandbookMIL 17 Volume 2 Polymer Matrix Composites Materials Properties
Book SynopsisThis standardization handbook has been developed and is being maintained as a joint effort of the Department of Defense and the Federal Aviation Administration. It provides guidelines and material properties for organic polymer and metal matrix composite materials. It provides a standard source of statistically-based mechanical property data for current and emerging composite materials, including aramid, glass, boron, alumina, silicon carbide, and quartz fiber composites..Table of ContentsGeneral Information. Fiber Properties. Matrix Properties.Carbon Fiber Composites. Aramid Fiber Composites. Glass Fiber Composites. Boron Fiber Composites. Alumina Fiber Composites. Silicon Carbide Fiber Composites. Quartz Fiber Composites. Appendices.
£58.99
Taylor & Francis Ltd Thermal Transport Characteristics of Phase Change Materials and Nanofluids
Book SynopsisThis book provides detailed information related to nanofluids, synthesis and preparation, morphologies of nanoparticles, selection of base fluids and thermophysical properties of nanofluids. The advantage of various conduits, the improvement of the heat transfer performance of phase change materials (PCMs), and the base PCMs for diverse applications are also discussed. Crucial difficulties like stability, aggregation, and clogging of nanoparticles are detailed including factors like the size, shape, and motion of nanoparticles that influence the heat transfer performance of nanofluids. Challenges, applications, and scope of the future works in the subject area are included. Features: Covers heat transfer techniques in utilization of base fluids application of phase change materials (PCMs) Describes preparation and characterization of nanofluids and nano-based PCMs Explains how nanoscience can be utilized in heat transfer studies Reviews cTable of Contents 1 Introduction; 2 NanoPCMs; 3 Synthesis and Characterization Techniques; 4 Phase Change Analysis; 5 NEPCMs for Cooling Applications; 6 NEPCMs for Heating Applications; 7 Composite PCMs for Thermal Energy Storage System; 8 Nanofluids; 9 Thermal Conductivity of Nanofluids; 10 Thermophysical Properties of Nanofluids; 11 Stability of Nanofluid; 12 Effect of Particle Volume Concentration; 13 Heat Transfer Mechanism in Nanofluid; 14 Hybrid Nanofluids; 15 Applications of Nanofluids and PCMs
£115.00
Taylor & Francis Inc Capacity and Transport in Contrast Composite
Book SynopsisIs it possible to apply a network model to composites with conical inclusions?How does the energy pass through contrast composites? Devoted to the analysis of transport problems for systems of densely packed, high-contrast composite materials, Capacity and Transport in Contrast Composite Structures: Asymptotic Analysis and Applications answers questions such as these and presents new and modified asymptotic methods for real-world applications in composite materials development. A mathematical discussion of phenomena related to natural sciences and engineering, this book covers historical developments and new progress in mathematical calculations, computer techniques, finite element computer programs, and presentation of results of numerical computations. The transport problemwhich is described with scalar linear elliptic equTrade Review... deals with interesting questions of strongly heterogeneous media, such as the analysis of capacities and transport properties. ... The book is intended to be self-contained and it is of interest to researchers in the fields of "homogenization theory" and "asymptotic analysis" in the areas of applied mathematics, physics and engineering sciences. More specifically, it may be of interest to students and researchers in mathematical models related to diffusion, electricity, magnetism, mechanics, new materials and design methods. It is written in terms of electrostatics, and it pays special attention to the so-called (by the authors) "Tamm screening effect" or "Tamm shielding effect" and the problems of the "effective tunability" and "effective loss" of composite materials. These effects/terms (and some others) arising in physics and engineering are in the reviewer’s opinion rarely considered in the literature of applied mathematics, and the authors provide a mathematical interpretation in this book .... Many figures in the book are important for the understanding of the corresponding problems and the results obtained.—Eugenia Pérez, in Mathematical Reviews, 2012aTable of ContentsIDEAS AND METHODS OF ASYMPTOTIC ANALYSIS AS APPLIED TO TRANSPORT IN COMPOSITE STRUCTURES. NUMERICAL ANALYSIS OF LOCAL FIELDS IN A SYSTEM OF CLOSELY PLACED BODIES. ASYMPTOTIC BEHAVIOR OF CAPACITY OF A SYSTEM OF CLOSELY PLACED BODIES. TAMM SHIELDING. NETWORK APPROXIMATION. NETWORK APPROXIMATION FOR POTENTIALS OF CLOSELY PLACED BODIES. ANALYSIS OF TRANSPORT PROPERTIES OF HIGHLY FILLED CONTRAST COMPOSITES USING THE NETWORK APPROXIMATION METHOD. EFFECTIVE TUNABILITY OF HIGH-CONTRAST COMPOSITES. EFFECTIVE LOSS OF HIGH-CONTRAST COMPOSITES. TRANSPORT AND ELASTIC PROPERTIES OF THIN LAYERS.
£62.58
Nova Science Publishers Inc Theory of Structure Transformations in
Book SynopsisMainly reporting results obtained by him and his Russian research group, Olemskoi explores peculiarities in the behavior of statistical ensembles of atoms in the condensed state that make ideas like phonon conception either inapplicable or in need of some modification. He discusses phase transitions, the theory of condensed matter structure rearrangement, defects of crystal structure, the synergetics of the new phase macrostructure evolution, the supersymmetric theory of time-space evolution, and the theory of stochastic systems with singular multiplicative noise.
£113.59
Cambridge University Press Impact on Composite Structures
Book SynopsisMuch research is being conducted on impact on composite structures because significant damage can occur and yet be undetectable by visual inspection. This book explains how damage develops during impact, the effect of impact-induced damage on the mechanical behavior of structures, and methods of damage prediction and detection. Numerous examples illustrate these topics.Trade Review'This is one of the first books totally devoted to impact on composite structures. Composites have become of increasing importance in structures since the 1940s, and today many structural elements are manufactured from them, particularly in the aerospace industries … this is an excellent book for any advanced student or researcher.' Bradley Dodd, The Times Higher Education Supplement'This book offers a good overview of the many aspects of this important topic by a single author and is supported by extensive references. The book essentially achieves the aim of providing a comprehensive review of current knowledge in this field … the book is a useful addition to the literature and should provide a good source of reference for both research workers and practising engineers. The book gives value for money for the specialist.' Proceedings of the Institution of Mechanical Engineers'This book succeeds as a 'state-of-the-art' text … The book is very nicely presented and reads well. I recommend it to civil, structural, aerospace, naval, architectural and automobile engineers …'. Structural EngineerTable of Contents1. Introduction; 2. Contact laws; 3. Impact dynamics; 4. Low velocity impact damage; 5. Damage prediction; 6. Residual properties; 7. Ballistic impact; 8. Repairs; 9. Impact on sandwich structures; References.
£125.00
Cambridge University Press Fundamentals of Transport Processes with Applications
Book SynopsisFluid-phase material transformations are essential to many engineering processes. This textbook provides a fundamental understanding, and develops methods for estimating, how the outcome of transformation processes is determined by heat/mass transfer and fluid flow.Table of Contents1. Introduction and dimensional analysis; 2. Dimensionless groups and correlations; 3. Diffusion and dispersion; 4. Unidirectional transport: Cartesian co-ordinates; 5. Unidirectional transport: curvilinear co-ordinates; 6. Pressure-driven flow; 7. Mass and energy conservation; 8.. Diffusion equation; 9 Forced convection; 10. Natural convection.
£74.99
John Wiley & Sons Inc Cyclic Plasticity of Engineering Materials
Book SynopsisNew contributions to the cyclic plasticity of engineering materials Written by leading experts in the field, this book provides an authoritative and comprehensive introduction to cyclic plasticity of metals, polymers, composites and shape memory alloys. Each chapter is devoted to fundamentals of cyclic plasticity or to one of the major classes of materials, thereby providing a wide coverage of the field. The book deals with experimental observations on metals, composites, polymers and shape memory alloys, and the corresponding cyclic plasticity models for metals, polymers, particle reinforced metal matrix composites and shape memory alloys. Also, the thermo-mechanical coupled cyclic plasticity models are discussed for metals and shape memory alloys. Key features: Provides a comprehensive introduction to cyclic plasticity Presents Macroscopic and microscopic observations on the ratchetting of different materials Establishes cTable of Contents Introduction 1 I.1 Monotonic Elastoplastic Deformation 1 I.2 Cyclic Elastoplastic Deformation 3 I.2.1 Cyclic Softening/Hardening Features 3 I.2.2 Mean Stress Relaxation 6 I.2.3 Ratchetting 7 I.3 Contents of This Book 9 References 10 1 Fundamentals of Inelastic Constitutive Models 13 1.1 Fundamentals of Continuum Mechanics 13 1.1.1 Kinematics 13 1.1.2 Definitions of Stress Tensors 15 1.1.3 Frame‐Indifference and Objective Rates 16 1.1.4 Thermodynamics 17 1.1.4.1 The First Thermodynamic Principle 17 1.1.4.2 The Second Thermodynamic Principle 17 1.1.5 Constitutive Theory of Solid Continua 18 1.1.5.1 Constitutive Theory of Elastic Solids 18 1.1.5.2 Constitutive Theory of Elastoplastic Solids 19 1.2 Classical Inelastic Constitutive Models 22 1.2.1 J2 Plasticity Model 23 1.2.2 Unified Visco‐plasticity Model 24 1.3 Fundamentals of Crystal Plasticity 25 1.3.1 Single Crystal Version 25 1.3.2 Polycrystalline Version 27 1.4 Fundamentals of Meso‐mechanics for Composite Materials 28 1.4.1 Eshelby’s Inclusion Theory 29 1.4.2 Mori–Tanaka’s Homogenization Approach 30 References 32 2 Cyclic Plasticity of Metals: I. Macroscopic and Microscopic Observations and Analysis of Micro-mechanism 35 2.1 Macroscopic Experimental Observations 35 2.1.1 Cyclic Softening/Hardening Features in More Details 35 2.1.1.1 Uniaxial Cases 35 2.1.1.2 Multiaxial Cases 43 2.1.2 Ratchetting Behaviors 47 2.1.2.1 Uniaxial Cases 48 2.1.2.2 Multiaxial Cases 62 2.1.3 Thermal Ratchetting 75 2.2 Microscopic Observations of Dislocation Patterns and Their Evolutions 77 2.2.1 FCC Metals 80 2.2.1.1 Uniaxial Case 80 2.2.1.2 Multiaxial Case 86 2.2.2 BCC Metals 95 2.2.2.1 Uniaxial Case 95 2.2.2.2 Multiaxial Case 103 2.3 Micro‐mechanism of Ratchetting 111 2.3.1 FCC Metals 111 2.3.1.1 Uniaxial Ratchetting 111 2.3.1.2 Multiaxial Ratchetting 114 2.3.2 BCC Metals 115 2.3.2.1 Uniaxial Ratchetting 115 2.3.2.2 Multiaxial Ratchetting 117 2.4 Summary 118 References 119 3 Cyclic Plasticity of Metals: II. Constitutive Models 123 3.1 Macroscopic Phenomenological Constitutive Models 124 3.1.1 Framework of Cyclic Plasticity Models 124 3.1.1.1 Governing Equations 124 3.1.1.2 Brief Review on Kinematic Hardening Rules 126 3.1.1.3 Combined Kinematic and Isotropic Hardening Rules 131 3.1.2 Viscoplastic Constitutive Model for Ratchetting at Elevated Temperatures 136 3.1.2.1 Nonlinear Kinematic Hardening Rules 136 3.1.2.2 Nonlinear Isotropic Hardening Rule 137 3.1.2.3 Verification and Discussion 138 3.1.3 Constitutive Models for Time‐Dependent Ratchetting 144 3.1.3.1 Separated Version 146 3.1.3.2 Unified Version 152 3.1.4 Evaluation of Thermal Ratchetting 161 3.2 Physical Nature‐Based Constitutive Models 163 3.2.1 Crystal Plasticity‐Based Constitutive Models 163 3.2.1.1 Single Crystal Version 163 3.2.1.2 Application to Polycrystalline Metals 167 3.2.2 Dislocation‐Based Crystal Plasticity Model 175 3.2.2.1 Single Crystal Version 175 3.2.2.2 Verification and Discussion 177 3.2.3 Multi‐mechanism Constitutive Model 183 3.2.3.1 2M1C Model 187 3.2.3.2 2M2C Model 188 3.3 Two Applications of Cyclic Plasticity Models 189 3.3.1 Rolling Contact Fatigue Analysis of Rail Head 189 3.3.1.1 Experimental and Theoretical Evaluation to the Ratchetting of Rail Steels 190 3.3.1.2 Finite Element Simulations 194 3.3.2 Bending Fretting Fatigue Analysis of Axles in Railway Vehicles 197 3.3.2.1 Equivalent Two‐Dimensional Finite Element Model 199 3.3.2.2 Finite Element Simulation to Bending Fretting Process 201 3.3.2.3 Predictions to Crack Initiation Location and Fretting Fatigue Life 203 3.4 Summary 209 References 211 4 Thermomechanically Coupled Cyclic Plasticity of Metallic Materials at Finite Strain 219 4.1 Cyclic Plasticity Model at Finite Strain 221 4.1.1 Framework of Finite Elastoplastic Constitutive Model 221 4.1.1.1 Equations of Kinematics 221 4.1.1.2 Constitutive Equations 221 4.1.1.3 Kinematic and Isotropic Hardening Rules 222 4.1.1.4 Logarithmic Stress Rate 223 4.1.2 Finite Element Implementation of the Proposed Model 224 4.1.2.1 Discretization Equations of the Proposed Model 224 4.1.2.2 Implicit Stress Integration Algorithm 227 4.1.2.3 Consistent Tangent Modulus 228 4.1.3 Verification of the Proposed Model 230 4.1.3.1 Determination of Material Parameters 230 4.1.3.2 Simulation of Monotonic Simple Shear Deformation 230 4.1.3.3 Simulation of Cyclic Free‐End Torsion and Tension–Torsion Deformations 231 4.1.3.4 Simulation of Uniaxial Ratchetting at Finite Strain 235 4.2 Thermomechanically Coupled Cyclic Plasticity Model at Finite Strain 239 4.2.1 Framework of Thermodynamics 239 4.2.1.1 Kinematics and Logarithmic Stress Rate 239 4.2.1.2 Thermodynamic Laws 239 4.2.1.3 Generalized Constitutive Equations 241 4.2.1.4 Restrictions on Specific Heat and Stress Response Function 243 4.2.2 Specific Constitutive Model 244 4.2.2.1 Nonlinear Kinematic Hardening Rule 246 4.2.2.2 Nonlinear Isotropic Hardening Rule 247 4.2.3 Simulations and Discussions 249 4.3 Summary 261 References 262 5 Cyclic Viscoelasticity–Viscoplasticity of Polymers 267 5.1 Experimental Observations 268 5.1.1 Cyclic Softening/Hardening Features 268 5.1.1.1 Uniaxial Strain‐Controlled Cyclic Tests 269 5.1.1.2 Multiaxial Strain‐Controlled Cyclic Tests 273 5.1.2 Ratchetting Behaviors 275 5.1.2.1 Uniaxial Ratchetting 275 5.1.2.2 Multiaxial Ratchetting 288 5.2 Cyclic Viscoelastic Constitutive Model 299 5.2.1 Original Schapery’s Model 302 5.2.1.1 Main Equations of Schapery’s Viscoelastic Model 302 5.2.1.2 Determination of Material Parameters 303 5.2.1.3 Simulations and Discussion 303 5.2.2 Extended Schapery’s Model 304 5.2.2.1 Main Modification 304 5.2.2.2 Simulations and Discussion 307 5.3 Cyclic Viscoelastic–Viscoplastic Constitutive Model 310 5.3.1 Main Equations 310 5.3.1.1 Viscoelasticity 313 5.3.1.2 Viscoplasticity 314 5.3.2 Verification and Discussion 315 5.3.2.1 Determination of Material Parameters 315 5.3.2.2 Simulations and Discussion 316 5.4 Summary 327 References 327 6 Cyclic Plasticity of Particle‐Reinforced Metal Matrix Composites 331 6.1 Experimental Observations 332 6.1.1 Cyclic Softening/Hardening Features 332 6.1.2 Ratchetting Behaviors 335 6.1.2.1 Uniaxial Ratchetting at Room Temperature 335 6.1.2.2 Uniaxial Ratchetting at 573 K 338 6.2 Finite Element Simulations 341 6.2.1 Time‐Independent Cyclic Plasticity 342 6.2.1.1 Main Equations of the Time‐Independent Cyclic Plasticity Model 343 6.2.1.2 Basic Finite Element Model and Simulations 346 6.2.1.3 Effect of Interfacial Bonding 351 6.2.1.4 Results with 3D Multiparticle Finite Element Model 362 6.2.2 Time‐Dependent Cyclic Plasticity 367 6.2.2.1 Finite Element Model 368 6.2.2.2 Simulations and Discussion 368 6.3 Meso‐mechanical Time‐Independent Plasticity Model 373 6.3.1 Framework of the Model 373 6.3.1.1 Time‐Independent Cyclic Plasticity Model for the Matrix 374 6.3.1.2 Extension of the Mori–Tanaka Homogenization Approach 374 6.3.2 Numerical Implementation of the Model 376 6.3.2.1 Under the Strain‐Controlled Loading Condition 376 6.3.2.2 Under the Stress‐Controlled Loading Condition 378 6.3.2.3 Continuum and Algorithmic Consistent Tangent Operators 379 6.3.3 Verification and Discussion 380 6.3.3.1 Determination of Material Parameters 380 6.3.3.2 Simulations and Discussion 380 6.4 Meso‐mechanical Time‐Dependent Plasticity Model 387 6.4.1 Framework of the Model 388 6.4.1.1 Time‐Dependent Cyclic Plasticity Model for the Matrix 389 6.4.1.2 Mori–Tanaka Homogenization Approach 390 6.4.2 Numerical Implementation of the Model 390 6.4.2.1 Generalized Incrementally Affine Linearization Formulation 390 6.4.2.2 Extension of Mori–Tanaka’s Model 391 6.4.2.3 Algorithmic Consistent Tangent Operator and Its Regularization 393 6.4.2.4 Numerical Integration of the Viscoplasticity Model 394 6.4.3 Verification and Discussion 395 6.4.3.1 Under Monotonic Tension 395 6.4.3.2 Under Strain‐Controlled Cyclic Loading Conditions 395 6.4.3.3 Time‐Dependent Uniaxial Ratchetting 395 6.5 Summary 398 References 401 7 Thermomechanical Cyclic Deformation of Shape‐Memory Alloys 405 7.1 Experimental Observations 407 7.1.1 Degeneration of Super‐Elasticity and Transformation Ratchetting 407 7.1.1.1 Thermomechanical Cyclic Deformation Under Strain‐Controlled Loading Conditions 407 7.1.1.2 Thermomechanical Cyclic Deformation Under Uniaxial Stress‐Controlled Loading Conditions 411 7.1.1.3 Thermomechanical Cyclic Deformation Under Multiaxial Stress‐Controlled Loading Conditions 419 7.1.2 Rate‐Dependent Cyclic Deformation of Super‐Elastic NiTi SMAs 426 7.1.2.1 Thermomechanical Cyclic Deformation Under Strain‐Controlled Loading Conditions 428 7.1.2.2 Thermomechanical Cyclic Deformation Under Stress‐Controlled Loading Conditions 434 7.1.3 Thermomechanical Cyclic Deformation of Shape‐Memory NiTi SMAs 441 7.1.3.1 Pure Mechanical Cyclic Deformation under Stress‐Controlled Loading Conditions 441 7.1.3.2 Thermomechanical Cyclic Deformation with Thermal Cycling and Axial Stress 451 7.2 Phenomenological Constitutive Models 452 7.2.1 Pure Mechanical Version 452 7.2.1.1 Thermodynamic Equations and Internal Variables 452 7.2.1.2 Main Equations of Constitutive Model 453 7.2.1.3 Predictions and Discussions 457 7.2.2 Thermomechanical Version 464 7.2.2.1 Strain Definitions 464 7.2.2.2 Evolution Rules of Transformation and Transformation‐Induced Plastic Strains 469 7.2.2.3 Simplified Temperature Field 473 7.2.2.4 Predictions and Discussions 477 7.3 Crystal Plasticity‐Based Constitutive Models 489 7.3.1 Pure Mechanical Version 489 7.3.1.1 Strain Definitions 489 7.3.1.2 Evolution Rules of Internal Variables 492 7.3.1.3 Explicit Scale Transition Rule 494 7.3.1.4 Verifications and Discussions 495 7.3.2 Thermomechanical Version 500 7.3.2.1 Strain Definitions 502 7.3.2.2 Evolution Rules of Internal Variables 503 7.3.2.3 Thermomechanical Coupled Analysis for Temperature Field 505 7.3.2.4 Verifications and Discussions 507 7.4 Summary 524 References 525 Index 531
£103.50
John Wiley & Sons Inc Strategic Materials and Computational Design
Book SynopsisContributions from three Focused Sessions that were part of the 34th International Conference on Advanced Ceramics and Composites (ICACC), in Daytona Beach, FL, January 24-29, 2010 are presented in this volume. The broad range of topics is captured by the Focused Session titles, which are listed as follows: FS1 - Geopolymers and other Inorganic Polymers; FS3 - Computational Design, Modeling Simulation and Characterization of Ceramics and Composites; and FS4 - Nanolaminated Ternary Carbides and Nitrides (MAX Phases). The session on Geopolymers and other Inorganic Polymers continues to attract growing attention from international researchers (USA, Australia, France, Germany, Italy, Czech Republic, and Viet Nam) and it is encouraging to see the variety of established and new applications being found for these novel and potentially useful materials. The session organizer gratefully acknowledges the support of the USTable of ContentsPreface ix Introduction xi GEOPOLYMERS AND OTHER INORGANIC POLYMERS Geomaterial Foam to Reinforce Wood 3 E. Prud'homme, P. Michaud, C. Peyratout, A. Smith, S. Rossignol, E. Joussein, and N. Sauvât Effect of Curing Conditions on the Porosity Characteristics of Metakaolin-Fly Ash Geopolymers 11 Tammy L. Metroke, Michael V. Henley, and Michael I. Hammons New Insights on Geopolymerisation using Molybdate, Raman, and Infrared Spectroscopy 17 C. H. Rüscher, E. Mielcarek, J. Wongpa, F. Jirasit, and W. Lutz Transformation of Polysialate Matrixes from Al-Rich and Si-Rich Metakaolins: Polycondensation and Physico-Chemical Properties 35 Elie Kamseu and Cristina Leonelli Effect of High Tensile Strength Polypropylene Chopped Fiber Reinforcements on the Mechanical Properties of Sodium Based Geopolymer Composites 47 Daniel R. Lowry and Waltraud M. Kriven Properties of Basalt Fiber Reinforced Geopolymer Composites 51 E. Rill, D. R. Lowry, and W. M. Kriven Novel Applications of Metal-Geopolymers 69 Oleg Bortnovsky, Petr Bezucha, Petr Sazama, Jiri Dëdecek, Zdena Tvarùzkovâ, and Zdenék Sobalik Making Foamed Concretes from Fly Ash Based on Geopolymer Method 83 Nhi Tuan Pham and Hoang Huy Le Preparation of Electrically Conductive Materials Based on Geopolymers with Graphite 91 Z. Cerny, I. Jakubec, P. Bezdicka, L. Sulc, J. Machacek, J. Bludskâ, and P. Roubicek Effect of Synthesis Parameters and Post-Cure Temperature on the Mechanical Properties of Geopolymers Containing Slag 101 Tammy L. Metroke, Brian Evans, Jeff Eichler, Michael I. Hammons, and Michael V. Henley COMPUTATIONAL DESIGN, MODELING, SIMULATION AND CHARACTERIZATION Electronic Structure and Band-Gaps of Eu-Doped LaSi3N5 Ternary Nitrides 109 L. Benco, Z. Lences, and P. Sajgalik First Principle Molecular Dynamic Simulations of Oxygen Plasma Etching of Organosilicate Low Dielectric Materials 119 Jincheng Du and Mrunal Chaudhari Kinetic Monte Carlo Simulation of Cation Diffusion in Yttria-Stabilized Zirconia 127 Brian Good Dynamic Neutron Diffraction Study of Thermal Stability and Self-Recovery in Aluminium Titanate 139 I. M. Low and Z. Oo NANOLAMINATED TERNARY CARBIDES AND NITRIDES Titanium and Aluminium Based Compounds as a Precursor for SHSofTi2AIN 153 L. Chlubny, J. Lis, and M. M. Bucko Investigations on the Oxidation Behavior of Max-Phase Based Ti2AIC Coatings on 7-TiAI 161 Maik Fröhlich Study of High-Temperature Thermal Stability of Max Phases in Vacuum 171 I. M. Low, W. K. Pang, S. J. Kennedy, and R. I. Smith Detection of Amorphous Silica in Oxidized Maxthal Ti3SiC2 at 500-1000°C 181 W. K. Pang, I. M. Low, J. V. Hanna, and J. P. Palmquist Author Index 191
£78.26
John Wiley & Sons Inc Developments in Strategic Materials Volume 29
Book SynopsisThis volume provides a one-stop resource, compiling current research on developments in strategic materials. It is a collection of papers from The American Ceramic Society s 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008. Papers included in this issue come from five symposia: Thermoelectric Materials for Power Conversion; Basic Science of Multifunctional Ceramics; Science of Ceramic Interfaces; Geopolymers; and Materials for Solid State Lighting. This is a valuable, up-to-date resource for researchers working in the field.Table of ContentsPreface. Introduction. OXY NITRIDE GLASSES. Developments in Oxynitride Glasses: Formation, Properties and Crystallization (Stuart Hampshire). THERMOELECTRIC MATERIALS FOR POWER CONVERSION APPLICATIONS. Thermoelectric Properties of Ge Doped In,O, (David Berardan, Emmanuel Guilrneau, Antoine Maignan, and Bernard Raveau). Transition Metal Oxides for Thermoelectric Generation (J.P. Doumerc, M. Blangero, M. Pollet, D. Carlier, J. Darriet. C. Delmas, and R. Decourt). Deformation and Texture Behaviors of Co-Oxides with Misfit Structure under High Temperature Compression* (Hiroshi Fukutomi, Kazuto Okayasu, Yoshirni Konno, Eisuke lguchi and Hiroshi Nakatsugawa). Fabrication of High-Performance Thermoelectric Modules Consisting of Oxide Materials (Ryoji Funahashi, Saori Urata. and Atsuko Kosuga). Influence of Grain Boundary on Textured Al-ZnO (Yoshiaki Kinemuchi, Hisashi Kaga. Satoshi Tanaka, Keizo Uematsu, Hiromi Nakano, and Koji Watari). Evaluation on Thermo-Mechanical Integrity of Thermoelectric Module for Heat Recovery at Low Temperature (Yujiro Nakatani, Takahiko Shindo, Kengo Wakamatsu, Takehisa Hino, Takashi Ohishi, Haruo Matsumuro, and Yoshiyasu ltoh). Transport Properties of Sn,P,Br, and Sn, ,Zn,P,,Br, (Stevce Stefanoski, Andrei V. Shevelkov, and George S. Nolas). Temperature Impact on Electrical Conductivity And Dielectric Properties of HCI Doped Polyaniline (Shuo Chen, Weiping Li, Shunhua Liu, William J. Craft, and David Y. Song). GEOPOLYMERS. Preparation of Ceramic Foams from Metakaolin-Based Geopolymer Gels (J.L. Bell and W.M. Kriven). Preparation of Photocatalytic Layers Based on Geopolymer (Z. Cerny, I. Jakubec, P. Bezdicka, V. Stengl, and P. Roubicek). Characterization of Raw Clay Materials in Serbia 0.063mm Sieved Residues (Snefana Devic, Milica Arsenovic and Branko ZivanCevic). Fireproof Coatings on the Basis of Alkaline Aluminum Silicate Systems (P.V. Krivenko, Ye.K. Pushkareva, M.V. Sukhanevich, and S.G. Guziy). Determining the Elastic Properties of Geopolymers Using Nondestructive Ultrasonic Techniques (Joseph Lawson, Benjamin Varela, Raj S. Pai Panandiker, and Maria Helguera). Bi-Axial Four Points Flexural and Compressive Strength of Geopolymer Materials Based Na20-K,O-A1,O3-SiO2 Systems (C. Leonelli, E. Kamseu, and V.M. Sglavo). A Study on Alkaline Dissolution and Geopolymerisation of Hellenic Fly Ash (Ch. Panagiotopoulou, T. Perraki, S. Tsivilis, N. Skordaki, and G. Kakali). Role of Oxide Ratios on Engineering Performance of Fly-Ash Geopolymer Binder Systems (Kwesi Sagoe-Crentsi).
£80.96
Cambridge University Press Evolution of Phase Transitions
Book SynopsisThis 2006 study will be of interest to those interested in the development and application of continuum-mechanical models that describe the macroscopic response of materials capable of undergoing stress- or temperature-induced transitions between two solid phases.Trade ReviewReview of the hardback: 'Wherever possible, Abeyaratne and Knowles connect phenomenological and experimental results. Aside from comparisons between analytical predictions and experiments on shape-memory wires, the authors use their framework to model experiments involving phase transformations induced by high-speed impact. To some extent, links between atomistic and continuum models for kinetics are also explored. This book is a unique, valuable, and elegantly written contribution to the literature on phase transformations. It should be included in the library of any mechanician, applied mathematician, or material scientist interested in martensitic alloys. Others working on broader classes of phase transformations will also find this book to be worthwhile reading. It is physically well-motivated, mathematically sound, and eminently clear.' Theoretical and Computational Fluid DynamicsTable of ContentsPart I. Introduction: 1. What this monograph is about; 2. Some experiments; 3. Continuum mechanics; 4. Quasilinear systems; 5. Outline of monograph; Part II. Two-Well Potentials, Governing Equations and Energetics: 1. Introduction; 2. Two-phase nonlinearly elastic materials; 3. Field equations and jump conditions; 4. Energetics of motion, driving force and dissipation inequality; Part III. Equilibrium Phase Mixtures and Quasistatic Processes: 1. Introduction; 2. Equilibrium states; 3. Variational theory of equilibrium mixtures of phases; 4. Quasistatic processes; 5. Nucleation and kinetics; 6. Constant elongation rate processes; 7. Hysteresis; Part IV. Impact-Induced Transitions in Two-Phase Elastic Materials: 1. Introduction; 2. The impact problem for trilinear two-phase materials; 3. Scale-invariant solutions of the impact problem; 4. Nucleation and kinetics; 5. Comparison with experiment; 6. Other types of kinetic relations; 7. Related work; Part V. Multiple-Well Free Energy Potentials: 1. Introduction; 2. Helmholtz free energy potential; 3. Potential energy function and the effect of stress; 4. Example 1: the van der Waals fluid; 5. Example 2: two-phase martensitic material with cubic and tetragonal phases; Part VI. The Continuum Theory of Driving Force: 1. Introduction; 2. Balance laws, field equations and jump conditions; 3. The second law of thermodynamics and the driving force; Part VII. Thermoelastic Materials: 1. Introduction; 2. The thermoelastic constitutive law; 3. Stability of a thermoelastic material; 4. A one-dimensional special case: uniaxial strain; Part VIII. Kinetics and Nucleation: 1. Introduction; 2. Nonequilibrium processes, thermodynamic fluxes and forces, kinetic relation; 3. Phenomenological examples of kinetic relations; 4. Micromechanically-based examples of kinetic relations; 5. Nucleation; Part IX. Models for Two-Phase Thermoelastic Materials in One Dimension: 1. Preliminaries; 2. Materials of Mie-Gruneisen type; 3. Two-phase Mie-Gruneisen materials; Part X. Quasistatic Hysteresis in Two-Phase Thermoelastic Tensile Bars: 1. Preliminaries; 2. Thermomechanical equilibrium states for a two-phase material; 3. Quasistatic processes; 4. Trilinear thermoelastic material; 5. Stress cycles at constant temperature; 6. Temperature cycles at constant stress; 7. The shape-memory cycle; 8. The experiments of Shaw and Kyriakides; 9. Slow thermomechanical processes; Part XI. Dynamics of Phase Transitions in Uniaxially Strained Thermoelastic Solids: 1. Introduction; 2. Uniaxial strain in adiabatic thermoelasticity; 3. The impact problem; Part XII. Statics: Geometric Compatibility: 1. Preliminaries; 2. Examples; Part XIII. Dynamics: Impact-Induced Transition in a CuA1Nl Single Crystal: 1. Introduction; 2. Preliminaries; 3. Impact without phase transformation; 4. Impact with phase transformation; 5. Application to austenite-B1 martensite transformation in CuA1Nl; Part XIV. Quasistatics: Kinetics of Martensitic Twinning: 1. Introduction; 2. The material and loading device; 3. Observations; 4. The model; 5. The energy of the system; 6. The effect of the transition layers: further observations; 7. The effect of the transition layers: further modeling; 8. Kinetics.
£42.99
ISTE Ltd and John Wiley & Sons Inc Materials under Extreme Loadings: Application to
Book SynopsisThis book presents recent and cutting edge advances in our understanding of key aspects of the response of materials under extreme loads that take place during high velocity impact and penetration. The focus of the content is on the numerous challenges associated with characterization and modeling of complex interactions that occur during these highly dynamic events. The following specific topics, among others, are addressed: characterization of material behavior under extreme loadings (estimate of damage, effects related to moisture contents, large pressures, large strain rates, etc.); measurement of microstructural changes associated with damage and mesoscopic scale modeling; macroscopic modeling, using the framework of the theory of viscoplasticity and damage; modeling and simulation of localization, cracking, and dynamic fragmentation of materials; application to penetration mechanics and trajectory instabilities. The book gathers together selected papers based on work presented as invited lectures at the 2nd US-France symposium held on 28-30 May 2008 in Rocamadour, France. The conference was organized by Eric Buzaud (DGA, Centre d'Études de Gramat) under the auspices of the International Center for Applied Computational Mechanics (ICACM).Table of ContentsPreface xv Chapter 1. Geomaterials Under Extreme Loading: The Natural Case 1 Philippe LAMBERT and Hervé TRUMEL 1.1. Introduction 1 1.2. Natural impacts 2 1.3. Discussion 27 1.4. Conclusions 32 1.5. Bibliography 33 PART 1. EXPERIMENTAL CHARACTERIZATION 45 Chapter 2. The Shock Properties of Concrete and Related Materials 47 Kostas TSEMBELIS, David J. CHAPMAN, Christopher H. BRAITHWAITE, John E. FIELD and William G. PROUD 2.1. Introduction 47 2.2. Experimental studies 53 2.3. Conclusion 65 2.4. Acknowledgments 65 2.5. Bibliography 66 Chapter 3. Comparison of Shocked Sapphire and Alumina 69 Geremy KLEISER, Lalit CHHABILDAS and William REINHART 3.1. Abstract 69 3.2. Introduction 70 3.3. Material 71 3.4. Experimental method 72 3.5. Experimental results 73 3.6. Conclusions 84 3.7. Acknowledgments 84 3.8. Bibliography 84 Chapter 4. Observations of Ballistic Impact Damage in Glass Laminate 87 Stephan BLESS 4.1. Introduction 87 4.2. Transient measurements 88 4.3. Post-test measurements 90 4.4. Multiple impacts 97 4.5. Discussion and summary 97 4.6. Acknowledgments 98 4.7. Bibliography 98 Chapter 5. Experimental Analysis of Concrete Behavior Under High Confinement 101 Xuan Hong VU, Yann MALECOT, Laurent DAUDEVILLE and Eric BUZAUD 5.1. Introduction 101 5.2. Experimental device 102 5.3. Influence of the water/cement ratio 105 5.4. Influence of the coarse aggregate size 106 5.5. Influence of the cement paste volume 113 5.6. Conclusion and future work 116 5.7. Acknowledgment 118 5.8. Bibliography 118 Chapter 6. 3D Imaging and the Split Cylinder Fracture of Cement-Based Composites 121 Eric LANDIS 6.1. Introduction 121 6.2. Methods and materials 122 6.3. Experiments and analysis 126 6.4. Experimental results 128 6.5. Conclusions 129 6.6. Bibliography 130 Chapter 7. Testing Conditions on Kolsky Bar 131 Weinong CHEN 7.1. Introduction 131 7.2. Kolsky bar 132 7.3. Limitations of the Kolsky bar 133 7.4. Methods for conducting valid Kolsky bar experiments 136 7.5. Conclusions 142 7.6. Bibliography 143 PART 2. MATERIAL MODELING 145 Chapter 8. Experimental Approach and Modeling of the Dynamic Tensile Behavior of a Micro-Concrete 147 Pascal FORQUIN and Benjamin ERZAR 8.1. Introduction 147 8.2. Experimental device 149 8.3. Data processing 151 8.4. Experimental results 154 8.5. Modeling of the damage process in concrete at high strain-rates (the Denoual, Forquin, Hild model) 158 8.6. Conclusion 172 8.7. Bibliography 175 Chapter 9. Toward Physically-Based Explosive Modeling: Meso-Scale Investigations 179 Hervé TRUMEL, Philippe LAMBERT, Guillaume VIVIER and Yves SADOU 9.1. Introduction 179 9.2. Methodology 181 9.3. The material: microstructure and macroscopic mechanical behavior 182 9.4. Samples from unitary experiments 185 9.5. Analysis of a recovered target 193 9.6. Discussion 198 9.7. Conclusion and future work 204 9.8. Acknowledgments 204 9.9. Bibliography 204 Chapter 10. Coupled Viscoplastic Damage Model for Hypervelocity Impact Induced Damage in Metals and Composites 209 George Z. VOYIADJIS 10.1. Introduction 209 10.2. Theoretical preliminaries for high velocity impact 212 10.3. A coupled rate-dependent (viscoplasticity) continuum damage theory 214 10.4. Computational aspects of the proposed theory 220 10.5. Numerical applications 228 10.6. Conclusions 240 10.7. Bibliography 241 Chapter 11. High-Pressure Behavior of Concrete: Experiments and Elastic/Viscoplastic Modeling 247 Martin J. SCHMIDT, Oana CAZACU and Mark L. GREEN 11.1. Introduction 247 11.2. Experimental study 249 11.3. Elastic-viscoplastic model development 254 11.4. Conclusions 263 11.5. Bibliography 264 Chapter 12. The Virtual Penetration Laboratory: New Developments 267 Mark D. ADLEY, Andreas O. FRANK, Kent T. DANIELSON, Stephen A. AKERS, James L. O’DANIEL and Bruce PATTERSON 12.1. Introduction 267 12.2. Constitutive model development 268 12.3. Perforation simulations 278 12.4. Penetration simulations 282 12.5. CSPC penetration resistance equation 284 12.6. Conclusions 287 12.7. Acknowledgment 288 12.8. Bibliography 288 Chapter 13. Description of the Dynamic Fragmentation of Glass with a Meso-Damage Model 291 Xavier BRAJER, François HILD and Stéphane ROUX 13.1. Introduction 291 13.2. Experimental results 292 13.3. Fragmentation analysis 294 13.4. Microcracking analysis 299 13.5. A “meso-damage” approach 302 13.6. Conclusion 306 13.7. Acknowledgments 307 13.8. Bibliography 307 PART 3. NUMERICAL SIMULATION TECHNIQUES 311 Chapter 14. An Approach to Generate Random Localizations in Lagrangian Numerical Simulations 313 Jacques PETIT 14.1. Introduction 313 14.2. Numerical modeling 314 14.3. Electromagnetic compression and its regular use 318 14.4. Numerical simulations without rupture: copper and nickel samples 321 14.5. Numerical simulations with rupture: TA6V4 samples 323 14.6. Conclusion 328 14.7. Bibliography 330 Chapter 15. X-FEM for the Simulation of Dynamic Crack Propagation 333 Alain COMBESCURE 15.1. Energy conservation when a crack propagates: a key issue 333 15.2. Dynamic crack propagation laws 339 15.3. Experiments interpretation 341 15.4. Bibliography 348 Chapter 16. DEM Model of a Rigid Missile Impact on a Thin Concrete Slab 351 Frédéric DONZÉ, Wen-Jie SHIU and Laurent DAUDEVILLE 16.1. Introduction 351 16.2. The DEM model 353 16.3. Modeling of the impact tests 355 16.4. Influence of reinforcement ratio 358 16.5. Influence of the nose shape of missile 361 16.6. Conclusion 365 16.7. Bibliography 365 Chapter 17. The Lattice Discrete Particle Model (LDPM) for the Numerical Simulation of Concrete Behavior Subject to Penetration 369 Gianluca CUSATIS 17.1. Introduction 369 17.2. Review of LDPM formulation 371 17.3. Uniaxial compression strength tests 375 17.4. Three-point bending tests 377 17.5. Multiaxial compression strength tests 378 17.6. Hopkinson bar tests 380 17.7. Penetration through reinforced concrete slabs 382 17.8. Closing remark 384 17.9. Acknowledgments 385 17.10. Bibliography 385 Chapter 18. An Improved Contact Algorithm for Multi-Material Continuum Codes 389 Kenneth C. WALLS and David L. LITTLEFIELD 18.1. Introduction 389 18.2. Background 390 18.3. The contact-impact problem 391 18.4. Formulation 395 18.5. Finite element formulation 398 18.6. Calculations 401 18.7. Discussion 405 18.8. Conclusions 410 18.9. Bibliography 412 Chapter 19. Parallel Computing for Non-linear Concrete Modeling 415 Kent DANIELSON, Mark ADLEY and James O’DANIEL 19.1. Introduction 415 19.2. Explicit dynamic finite element analysis 416 19.3. Numerical methodologies 417 19.4. Numerical applications 421 19.5. Concluding remarks 429 19.6. Acknowledgments 430 19.7. Bibliography 431 List of Authors 433 Index 439
£190.90
John Wiley & Sons Inc Advanced Ceramic Coatings and Materials for
Book SynopsisCeramic Engineering and Science Proceedings Volume 34, Issue 3 - Advanced Ceramic Coatings and Materials for Extreme Environments IIIA collection of 12 papers from The American Ceramic Society's 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the Advanced Ceramic Coatings and Systems and Next Generation Technologies for Innovative Surface Coatingssymposia.Table of ContentsPreface vii Introduction ix Progress in EBC Development for Silicon-Based, Non-Oxide Ceramics 1C.A. Lewinsohn, H. Anderson, J. Johnston, and Dongming Zhu Fabrication of Slurry Based Y-Si-AI-0 Environmental Barrier Coating on the Porous Si3N4 Ceramics 9Yinchao Liu, Chao Wang, Xuefen Lu, Hongjie Wang Creep and Environmental Durability of Environmental Barrier Coatings and Ceramic Matrix Composites under Imposed Thermal Gradient Conditions 19Matthew Appleby, Gregory N. Morscher, and Dongming Zhu Dynamic Oblique Angle Deposition of Nanostructures for Energy Applications 31G.-C. Wang, I. Bhat, and T.-M. Lu Photoinduced Hydrophilicity and Photocatalytic Properties of Nb205 Thin Films 47Raquel Fiz, Linus Appel, and Sanjay Mathur Hard Nanocomposite Coatings: Thermal Stability, Protection of Substrate against Oxidation, Toughness and Resistance to Cracking 55J. Musil Preparation of Epitaxially Grown Cr-Si-N Thin Films by Pulsed Laser Deposition 67T. Endo, K. Suzuki, A. Sato, T. Suzuki, T. Nakayama, H. Suematsu, and K. Niihara Influence of Oxygen Content on the Hardness and Electrical Resistivity of Cr(N,0) Thin Films 77Aoi Sato, Toshiyuki Endo, Kazuma Suzuki, Tsuneo Suzuki, Tadachika Nakayama, Hisayuki Suematsu, and Koichi Niihara Nanocomposite MO-CU-N Coatings Deposited by Reactive Magnetron Sputtering Process with a Single Alloying Target 89Duck Hyeong Jung, Caroline Sunyong Lee, and Kyoung II Moon Customized Coating Systems for Products with Added Value from Development to High Volume Production 97T. Hosenfeldt, Y. Musayev, and Edgar Schulz A Study on the Improvement of the Service Life of Shaft-Bushing Tribo-Systems by Plasma Sulfur Nitrocarburing Process 105Kyoung II Moon, Hyun Jun Park, Hyoung Jun Kim, Jin Uk Kim, and Cheol Wong Byun Microstructural Characterisation of Porous Ti02 Ceramic Coatings Fabricated by Plasma Electrolytic Oxidation of Ti 117Po-Jen Chu, Aleksey Yerokhin, Allan Matthews, and Ju-Liang He Author Index 129
£67.46
John Wiley & Sons Inc Ceramic Materials for Energy Applications III
Book SynopsisCeramic Engineering and Science Proceedings Volume 34, Issue 9 - Ceramic Materials for Energy Applications III A collection of 15 papers from The American Ceramic Society''s 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in Symposia 6 - Advanced Materials and Technologies for Rechargeable Energy Storage; Symposium 13 - Advanced Ceramics and Composites for Sustainable Nuclear Energy and Fusion Energy; Focused Session 4 - Advanced Processing for Photonics and Energy; and the Engineering Summit of the Americas session.Table of ContentsPreface vii Introduction ix ENGINEERING SUMMIT OF THE AMERICAS New Materials for Energy and Biomedical Applications 3 Alejandra Hortencia Miranda Gonzalez, Claudio Machado Junior, Bruna Andressa Bregadiolli, Natalia Coelho de Farias, Paulo Henrique Perlatti D'Alpino, and Carlos Frederico de Oliveira Graeff Ceramic Gas-Separation Membranes for Advanced Energy Applications 15 C. A. Lewinsohn, J. Chen, D. M. Taylor, P. A. Armstrong, L.L. Anderson, and M. F. Carolan ADVANCED MATERIALS AND TECHNOLOGIES FOR ENERGY GENERATION AND RECHARGEABLE ENERGY STORAGE Li-Ion Conducting Solid Electrolytes 27 A. Rost, J. Schilm, M. Kusnezoff, and A. Michaelis Sodium Iron Phosphate Na2FeP207 Glass-Ceramics for Sodium Ion Battery 33 Tsuyoshi Honma, Takuya Togashi, Noriko Ito, and Takayuki Komatsu Heterogeneous Manganese Oxide-Encased Carbon Nanocomposite Fibers for High Performance Pseudocapacitors 41 Qiang Li, Karen Lozano, Yinong Lü, and Yuanbing Mao The Effect of Geometric Factors on Sodium Conduction: A Comparison of Beta- and Beta"-Alumina 57 Emma Kennedy and Dunbar P. Birnie III ADVANCED CERAMIC MATERIALS AND PROCESSING FOR PHOTONICS AND ENERGY Effect of Porosity on the Efficiency of DSSC Produced by using Nano-Size Ti02 Powders 67 N. Bilgin, J. Park, and A. Ozturk Evaluation of Compression Characteristics for Composite- Antenna-Structures 79 Jinyul Kim, Dongseob Kim, Dongsik Shin, Weesang Park, and Woonbong Hwang Design and Fabrication of Smart-Skin Structures with a Spiral 87 Antenna Dongseob Kim, Jinyul Kim, and Woonbong Hwang ADVANCED CERAMICS AND COMPOSITES FOR SUSTAINABLE NUCLEAR ENERGY AND FUSION ENERGY Comparison of Probabilistic Failure Analysis for Hybrid Wound Composite Ceramic Assembly Tested by Various Methods 95 James G. Hemrick and Edgar Lara-Curzio Strength-Formulation Correlations in Magnesium Phosphate Cements for Nuclear Waste Encapsulation 107 W. Montague, M. Hayes, and L. J. Vandeperre Test Methods for Hoop Tensile Strength of Ceramic Composite Tubes for Light Water Nuclear Reactor Applications 119 Michael G. Jenkins and Jonathan A. Salem Test Methods for Flexural Strength of Ceramic Composite Tubes for Small Modular Reactor Applications 131 Michael G. Jenkins and Thomas L. Nguyen Effects of Size and Geometry on the Equibiaxial Flexural Test of Fine Grained Nuclear Graphite 141 Chunghao Shih, Yutai Katoh, and Takagi Takashi High Temperature Steam Corrosion of Cladding for Nuclear Applications: Experimental 149 Kevin M. McHugh, John E. Gamier, Sergey Rashkeev, Michael V. Glazoff, George W. Griffith, and Shannon M. Bragg-Sitton Author Index 161
£67.46
Wiley Kinetic Peculiarities of Solid Phase Reactions
Book SynopsisMuch data has been collected from experiments on the kinetics of radical reactions in different solids. This text explores the kinetics of solids. It discusses low-molecular matrices, polymers, and examines hydrogen atom transfer, triple carbene reactions and radical pair transformations.Table of ContentsFormally Kinetic Description of Reactions with Dispersion in Reactivity. Influence of Space-Orientation Factors on Reactivity in Solids. Connection of Solid Phase Kinetics with Molecular Dynamics. The Effect of the Structural-Physical Modification on the Kinetics of Radical Reactions. Tunnelling in Solid Phase Reactions. The Kinetic Isotope Effect in Solid Phase Reactions. Kinetics of Photoinitiated Reactions in Solids. Index.
£288.86
Cambridge University Press Composite Materials in Maritime Structures Volume 1 Fundamental Aspects Cambridge Ocean Technology Series Series Number 4
Book SynopsisThe two volumes that comprise this work provide a comprehensive guide and source book on the marine use of composite materials. This first volume, Fundamental Aspects, provides a rigourous development of theory.Trade Review"...a good up-to-date introduction to the overview of the composite materials technology for marine engineering. It is good reference material for structural engineers with no background in fiber reinforced plastic materials." Applied Mechanics ReviewTable of ContentsPreface; List of authors; 1. A Strategic Overview P. J. Usher; 2. Background to Materials Science G. Niederstadt; 3. Environmental Aspects G. Puccini; 4. Production by Resin Transfer Moulding K. van Harten; 5. An Engineering Approach to the Prediction of Elastic Properties of a Laminate R. A. Shenoi; 6. Mechanics of Orthotrophic Laminae A. H. J. Nijhof; 7. Analysis of Laminated Composites A. H. J. Nijhof; 8. Theory of Sandwich Beams and Plates H. G. Allen; 9. Design of Anistrophic Panels D. W. Chalmers; 10. Finite Element Analysis of Composites R. Damonte; 11. Theoretical Predictions of Failure Mechanisms and Strength P. T. Curtis; 12. Considerations of Failure Theories in Design D. W. Chalmers; 13. Test Procedures and Standards G. D. Sims; Appendix; Index.
£133.00
John Wiley & Sons Inc Composite Structures
Book SynopsisPresents the latest strategies in the development and use of composite materials for large structures and the effects of defects Practical Design and Validation of Composites Structures: Effects of Defects offers an important guide to the use of fiber-reinforced composites and how they affect the durability and safety of engineering structures such as aircraft, ships, bridges, wind turbines as well as sporting equipment. The text draws on the authors' direct experience in industry and academia to cover the most recent strategies in the development of composite structures and uniquely integrates the assessment of the effects of defects introduced during production. This comprehensive resource builds on an essential introduction to the characteristics of composites and the most common types of defects encountered in production. The authors review the recent manufacturing methods and technologies used for inspecting composite structures and the design issuesTable of ContentsPreface xi 1 Characteristics of Composites 1 1.1 Introduction to Behavior 1 1.2 Introduction to Composite Analysis 3 1.3 Failure and Strength Methodologies 5 1.3.1 Lamina Failure Modes and their Influence upon Catastrophic Failure of Multidirectional Laminates 5 1.3.2 Design Values and Environmental Sensitivity 8 1.3.3 Design Values for Unnotched Multidirectional Laminates 11 1.3.4 Design Values for Notched Multidirectional Laminates 12 1.3.5 Material Variability 14 1.3.6 Strain-Based Failure Methodology 15 1.3.7 Composite Fatigue Behavior 15 References 16 2 DesignMethodology and Regulatory Requirements 19 2.1 Regulatory Requirements 19 2.2 Material and Process Specifications 22 2.3 Design Methodology 23 2.4 Design Values for Notched Multidirectional Laminates 24 2.5 Design Values for Bolted Joints 28 2.5.1 Determination of Fastener Loading 29 2.5.2 Failure Analysis at a Loaded and Unloaded Hole 29 2.6 Design Values for Bonded Joints and Bondlines 33 2.7 Design Values for Sandwich Structure 36 2.7.1 Facesheet Tension Design Values 36 2.7.2 Facesheet Compression Design Values 36 2.7.3 Sandwich Flexural Design Values 37 2.7.4 Out-of-Plane Loading 37 2.8 Statistical Allowables 37 2.9 Simulation of Temperature and Moisture Content 39 References 40 3 Material, Manufacturing, and Service Defects 43 3.1 Introduction 43 3.1.1 Differentiating Cosmetic from Structural Defects 46 3.2 Defects by Stage of Occurrence 46 3.2.1 Material Precure Defects 46 3.2.1.1 Fiber Damage and Defects 50 3.2.2 Manufacturing Defects 51 3.2.3 Service Defects 54 3.3 Defects by Location: Matrix-Dominated Defects 60 3.3.1 Matrix Degradation Due to Porosity and Voids 60 3.3.2 Matrix Degradation Due to Aged Material 63 3.3.3 Matrix Degradation Due to Errors in Curing (Pressure and Temperature) 64 3.3.4 Matrix Damage with No Fiber Breakage from Impact 67 3.3.5 Matrix Cracking and Crazing 67 3.3.6 Matrix Degradation Due to Anomalous Moisture Absorption 68 3.3.7 Matrix Degradation Due to UV Radiation or Surface Contamination 69 3.3.8 Matrix Degradation Due to High Temperature Exposure 70 3.3.9 Blisters 72 3.3.10 Matrix Degradation Due to Resin Mixture Error 73 3.4 Defects by Location: Fiber-Dominated Process Defects 73 3.4.1 Fiber Misalignment orWrinkles 73 3.4.1.1 In-PlaneWaviness 73 3.4.1.2 Out-of-PlaneWaviness 74 3.4.2 Excessive Ply Drops and Gaps 76 3.4.3 Fiber Damage 78 3.5 Defects by Location: Sandwich Composite Defects 78 3.5.1 Core Defect: Over-Expanded or Blown Core 79 3.5.2 Core Defect: Core Crushing or Movement 79 3.5.3 Core Defect: Core-Splice Spacing Exceeding Limits 80 3.5.4 Core Defect: Incorrect or Variable CoreThickness 80 3.5.5 Core Defect: Core Degradation Due to Core Defect –Water Entrapment in Core 81 3.5.6 Core Defect: Incorrect Core Density 81 3.5.7 Core Defect: Misaligned Nodes or Unbonded Nodes in Core Cell 81 3.5.8 Core Defect: Mismatched Nodes or Corrugations 82 3.5.9 Core Defect: Corrosion 82 3.5.10 Facesheet Defect: Pillowing,Wrinkling, or Orange Peel 82 3.5.11 Facesheet Defect: Dents in Facesheet 83 3.5.12 Facesheet/Core Disbond 83 3.5.13 Defects in Adhesive Fillets 84 3.5.14 Edge-Closeout Defects 84 3.6 Defects by Location: Mixed-Mode Fiber and Matrix Defects 86 3.6.1 Impact Damage with Fiber Breakage 86 3.6.2 Bearing Damage 87 3.6.3 Edge Cracking and Crushing 88 3.6.4 Cuts, Scratches, and Gouges 89 3.6.5 Composite Damage from Lightning Strikes 89 3.6.6 Misdrilled Holes 90 3.6.7 Mismatched Parts 90 3.6.8 Incorrect Fiber Orientation or Missing Plies 91 3.6.9 Galvanic Corrosion 91 3.6.10 Resin Migration and Uneven Fiber Volume Fraction 92 3.6.11 Residual Stresses and Dimensional Conformance 94 3.6.12 Delaminations 96 3.6.13 Composite Degradation Due to Excessive Temperature and Chemical Exposure 98 3.6.13.1 Fibers 98 3.6.13.2 Matrix 98 3.7 Defects by Location: Fastened and Bonded Joint Defects 98 3.7.1 Fastened Joints 98 3.7.1.1 Bearing Damage 99 3.7.1.2 Hole Delamination/Fraying 99 3.7.1.3 Hole Elongation or Out-of-Round Holes 99 3.7.1.4 Fastener Seating 99 3.7.1.5 Fastener Over-Torque 99 3.7.1.6 Fastener Under-Torque 100 3.7.1.7 Missing Fastener 100 3.7.1.8 Porosity Near the Fastener 100 3.7.1.9 Resin-Starved Bearing Surface 100 3.7.1.10 Insufficient Edge Margins 100 3.7.1.11 Tilted Hole 100 3.7.2 Bonded Joints 100 3.7.2.1 Poor Cure Due to Improper Material Chemistry: Mixing of Two-Part Resins or Material Past Shelf- or Out Life 103 3.7.2.2 Incorrect Bondline Thickness, Scarf, or Overlap Length 103 3.7.2.3 Zero-Volume Disbond or Long-Term Bond Failure Due to Contamination or Incorrect Surface Preparation 103 3.7.2.4 Bondline Degradation Due to Moisture or Incorrect Pressure During Processing 103 3.7.2.5 Bondline Degradation Due to Incorrect Heating Procedures 104 3.8 Future Directions 104 References 104 4 InspectionMethods 111 4.1 Introduction 111 4.2 Mechanical Vibration NDT Methods 117 4.2.1 Low Frequency Methods 117 4.2.1.1 Tap Testing 117 4.2.1.2 Mechanical Impedance 117 4.2.1.3 Membrane Resonance 118 4.2.2 High Frequency Ultrasonic Methods 118 4.2.2.1 Pulse Echo andThru-Transmission 118 4.2.2.2 Pulse Echo Ultrasonics 119 4.2.2.3 Through-Transmission Ultrasonics 119 4.2.2.4 Phased Array Ultrasonics 120 4.2.2.5 Ultrasonic Spectroscopy for Zero-Volume Disbonds 120 4.2.2.6 Ultrasonic Methods for Fiber Distortion 120 4.2.2.7 Guided LambWaves 122 4.2.2.8 Air-Coupled Ultrasonics 122 4.2.3 Acoustic Emission 123 4.3 Visual and Enhanced Visual Methods 125 4.3.1 Visual Inspections 125 4.3.2 Verification or Pressure Film 125 4.3.3 Leak Testing 126 4.4 Electromagnetic Radiation (X-Ray, Gamma, and Neutron) 126 4.4.1 Radiography 126 4.4.2 Computed Tomography 127 4.4.3 Compton Scattering 130 4.4.4 Neutron Tomography 131 4.5 Optical Methods 131 4.5.1 Shearography 131 4.5.2 Digital Image Correlation (DIC) 133 4.5.3 Hyperspectral Near Infrared Method for Resin Migration and Fiber Distortion 135 4.5.4 Laser Profilometers and Image Processing 136 4.6 Strain Measurement 137 4.7 Thermography 138 4.7.1 ActiveThermography 139 4.7.1.1 Thermoelastic Stress Analysis 139 4.7.2 Passive Thermography 139 4.8 Destructive Methods 142 4.8.1 Physical Tests 142 4.8.2 Density and Porosity Measurements 144 4.8.3 Microscopy 145 4.9 NDT Standards 147 References 147 5 Effects of Defects – Design Values and Statistical Considerations 159 5.1 Introduction 159 5.2 Effects on Laminate Properties 162 5.2.1 Cure Cycle Anomalies 162 5.2.1.1 Porosity 162 5.2.1.2 Nonuniformly Distributed Voids (Stratified Porosity) 163 5.2.1.3 Stratified Porosity or Delamination in L-Shaped Details 163 5.2.1.4 In-Plane Fiber Misalignment 164 5.2.1.5 FiberWaviness (Out-of-Plane) 164 5.2.1.6 Waviness in Curved Parts 168 5.2.1.7 Ply Gaps and Overlaps 170 5.2.2 Cuts, Scratches, and Gouges 171 5.2.3 Edge Delaminations 172 5.2.4 Foreign Object Impact 172 5.3 Effects on Sandwich Composites Properties 174 5.3.1 Facesheet to Core Disbonding 174 5.3.2 Facesheet Pillowing 175 5.3.3 Node Disbonds 176 5.3.4 Core Splicing 176 5.4 Effects on Bolted Joint Properties 179 5.4.1 Delaminations at the Holes 180 5.4.2 Oversize Holes 182 5.4.3 Over-Torqued Fasteners 182 5.4.4 Porosity Near Fasteners 184 5.5 Effects on Bonded Joint Properties 184 5.5.1 Assessment of Defects in Design of Bonded Joints 185 5.6 Statistical Considerations 185 5.6.1 Mean versus Design Values 189 5.6.2 Simpson’s Paradox 189 5.6.3 Design of Experiments 189 5.7 Suggested Approach for Evaluation of Defects 191 5.8 Evaluation of Scaling and Multiple Defects 192 References 194 6 Selected Case Studies in Effects of Defects 201 6.1 Introduction 201 6.2 Case Study 1: The Ohio Timber Road IIWind Turbine Failure Due to Wrinkles 201 6.2.1 Event 201 6.2.2 Background 201 6.2.3 Investigation 202 6.2.4 Lessons Learned 202 6.3 Case Study 2: Faulty Repairs of Sandwich Core Structure 203 6.3.1 Event 203 6.3.2 Lessons Learned 203 6.4 Case Study 3: Bonded Repair Failure 205 6.4.1 Event 205 6.4.2 Investigation 205 6.4.3 Lessons Learned 205 6.5 Case Study 4: Air Transat 961 Sandwich-Composite Failure 206 6.5.1 Event 206 6.5.2 Investigation 206 6.5.3 Lessons Learned 207 6.6 Case Study 5: Debonding Failure of a Sandwich-Composite Cryogenic Fuel Tank 208 6.6.1 Event 208 6.6.2 Investigation 208 6.6.3 Lessons Learned 208 References 209 Glossary 211 Index 215
£76.46
Cambridge University Press Impact on Composite Structures
Book SynopsisMuch research is being conducted on impact on composite structures because significant damage can occur and yet be undetectable by visual inspection. This book explains how damage develops during impact, the effect of impact-induced damage on the mechanical behavior of structures, and methods of damage prediction and detection. Numerous examples illustrate these topics.Trade Review'This is one of the first books totally devoted to impact on composite structures. Composites have become of increasing importance in structures since the 1940s, and today many structural elements are manufactured from them, particularly in the aerospace industries … this is an excellent book for any advanced student or researcher.' Bradley Dodd, The Times Higher Education Supplement'This book offers a good overview of the many aspects of this important topic by a single author and is supported by extensive references. The book essentially achieves the aim of providing a comprehensive review of current knowledge in this field … the book is a useful addition to the literature and should provide a good source of reference for both research workers and practising engineers. The book gives value for money for the specialist.' Proceedings of the Institution of Mechanical Engineers'This book succeeds as a 'state-of-the-art' text … The book is very nicely presented and reads well. I recommend it to civil, structural, aerospace, naval, architectural and automobile engineers …'. Structural EngineerTable of Contents1. Introduction; 2. Contact laws; 3. Impact dynamics; 4. Low velocity impact damage; 5. Damage prediction; 6. Residual properties; 7. Ballistic impact; 8. Repairs; 9. Impact on sandwich structures; References.
£52.16
Springer Mechanics of Composite Structures
£224.99
Cambridge University Press Phase Transition Dynamics
Book SynopsisPhase Transition Dynamics, first published in 2002, provides a fully comprehensive treatment of the study of phase transitions. Building on the statistical mechanics of phase transitions, covered in many introductory textbooks, it will be essential reading for researchers and advanced graduate students in physics, chemistry, metallurgy and polymer science.Trade Review'… an excellent detailed summary and generalisation of research.' Materials World'Particular strengths are the many well-presented figures and micrographs of experimental data, and the extensive reference list at the end of each chapter. The receptive audience will be graduate students and active researchers working on phrase transition dynamics in condensed-matter physics and closely related fields. The book fills an important niche, however, and is well worth the effort.' Contemporary PhysicsTable of ContentsPreface; Part I. Statics: 1. Spin systems and fluids; 2. Critical phenomena and scaling; 3. Mean field theories; 4. Advanced theories in statics; Part II. Dynamic Models and Dynamics in Fluids and Polymers: 5. Dynamic models; 6. Dynamics in fluids; 7. Dynamics in polymers and gels; Part III. Dynamics of Phase Changes: 8. Phase ordering and defect dynamics; 9. Nucleation; 10. Phase transition dynamics in solids; 11. Phase transitions of fluids in shear flow; Index.
£132.05
John Wiley & Sons Inc Properties for Design of Composite Structures
Book SynopsisPROPERTIES FOR DESIGN OF COMPOSITE STRUCTURES A comprehensive guide to analytical methods and source code to predict the behavior of undamaged and damaged composite materials In Properties for Design of Composite Structures: Theory and Implementation Using Software, distinguished researcher Dr. Neil McCartney delivers a unique and insightful approach to the development of predictive methods for the properties of undamaged and damaged laminated composite materials. The book focuses on presenting compact analytical formulae for several important effective propertiesincluding mechanical, thermal, and electricalthat can be applied to a variety of reinforcement geometries. The author introduces a compact notation that enables an explicit treatment of laminate property determination, including the out-of-plane shear properties required for three-dimensional numerical simulations of structural features using finite and boundary element analyses. There is alsoTable of ContentsPreface vii About the Companion Website ix 1 Introduction 1 2 Fundamental Relations for Continuum Models 5 3 Maxwell’s Far-field Methodology Applied to the Prediction of Effective Properties of Multiphase Isotropic Particulate Composites 43 4 Maxwell’s Methodology for the Prediction of Effective Properties of Unidirectional Multiphase Fibre-reinforced Composites 65 5 Reinforcement with Ellipsoidal Inclusions 97 6 Properties of an Undamaged Single Lamina 111 7 Effective Thermoelastic Properties of Undamaged Laminates 129 8 Energy Balance Approach to Fracture in Anisotropic Elastic Material 163 9 Ply Crack Formation in Symmetric Cross-ply Laminates 189 10 Theoretical Basis for a Model of Ply Cracking in General Symmetric Laminates 223 11 Ply Cracking in Cross-ply Laminates Subject to Biaxial Bending 249 12 Energy-based Delamination Theory for Biaxial Loading in the Presence of Thermal Stresses 271 13 Energy Methods for Fatigue Damage Modelling of Laminates 297 14 Model of Composite Degradation Due to Environmental Damage 329 15 Maxwell’s Far-field Methodology Predicting Elastic Properties of Multiphase Composites Reinforced with Aligned Transversely Isotropic Spheroids 345 16 Debonding Models and Application to Fibre Fractures and Matrix Cracks 379 17 Interacting Bridged Ply Cracks in a Cross-ply Laminate 425 18 Theoretical Basis for a Model of Ply Cracking in General Symmetric Laminates 447 19 Stress-transfer Mechanics for Biaxial Bending 479 Appendix A: Solution for Shear of Isolated Spherical Particle in an Infinite Matrix 503 Appendix B: Elasticity Analysis of Two Concentric Cylinders 510 Appendix C: Gibbs Energy per Unit Volume for a Cracked Laminate 518 Appendix D: Crack Closure Conditions for Laminates 523 Appendix E: Derivation of the Solution of Nonlinear Equations 531 Appendix F: Analysis for Transversely Isotropic Cylindrical Inclusions 536 Appendix G: Recurrence Relations, Differential Equations and Boundary Conditions 541 Appendix H: Solution of Differential Equations 546 Appendix I: Energy Balance Equation for Delamination Growth 551 Appendix J: Derivation of Energy-based Fracture Criterion for Bridged Cracks 554 Appendix K: Numerical Solution of Integral Equations for Bridged Cracks 560 Index 565
£92.67
John Wiley & Sons Inc Handbook of Composites from Renewable Materials
Book SynopsisThis unique multidisciplinary 8-volume set focuses on the emerging issues concerning synthesis, characterization, design, manufacturing and various other aspects of composite materials from renewable materials and provides a shared platform for both researcher and industry. The Handbook of Composites from Renewable Materials comprises a set of 8 individual volumes that brings an interdisciplinary perspective to accomplish a more detailed understanding of the interplay between the synthesis, structure, characterization, processing, applications and performance of these advanced materials. The Handbook comprises 169 chapters from world renowned experts covering a multitude of natural polymers/ reinforcement/ fillers and biodegradable materials. Volume 6 is solely focused on the Polymeric Composites. Some of the important topics include but not limited to: Keratin as renewable material for developing polymer composites; natural and synthetic matrices;Table of ContentsPreface xxi 1 Keratin as Renewable Material to Develop Polymer Composites: Natural and Synthetic Matrices 1Flores-Hernandez C.G., Murillo-Segovia B., Martinez-Hernandez A.L. and Velasco-Santos C 1.1 Introduction 1 1.2 Keratin 2 1.2.1 Feathers 5 1.2.2 Hair and Wool 8 1.2.3 Horn 9 1.3 Natural Fibers to Reinforce Composite Materials 11 1.4 Keratin, an Environmental Friendly Reinforcement for Composite Materials 11 1.4.1 Synthetic Matrices 11 1.4.1.1 Petroleum-Based Polymers Reinforced with Chicken Feathers 13 1.4.1.2 Synthetic Matrices Reinforced with Hair or Wool 18 1.4.1.3 Synthetic Matrices Reinforced with Horn 20 1.4.2 Natural Matrices 20 1.4.2.1 Natural Matrices Reinforced with Chicken Feathers 21 1.4.2.2 Natural Matrices Reinforced with Hair or Wool 24 1.5 Conclusions 25 References 26 2 Determination of Properties in Composites of Agave Fiber with LDPE and PP Applied Molecular Simulation 31Norma-Aurea Rangel-Vazquez and Ricardo Rangel 2.1 Introduction 31 2.1.1 Lignocellulosic Materials 31 2.1.1.1 Fibers 32 2.1.1.2 Agave 33 2.1.1.3 Chemical Treatment of Fibers 34 2.1.2 Composites 35 2.1.3 Polymers 35 2.1.3.1 Polyethylene 37 2.1.3.2 Polypropylene (PP) 39 2.1.4 Molecular Modelation 39 2.1.4.1 Classification 40 2.1.4.2 Properties 42 2.2 Materials and Methods 44 2.2.1 Geometry Optimization 44 2.2.2 Structural Parameters 44 2.2.3 FTIR 45 2.2.4 Molecular Electrostatic Potential Map 45 2.3 Results and Discussions 48 2.3.1 Geometry Optimization 48 2.3.2 Deacetylation of Agave Fiber 49 2.3.3 Structural Parameters 50 2.3.4 FTIR 50 2.3.5 Molecular Electrostatic Potential Map (MESP) 54 2.4 Conclusions 54 References 55 3 Hydrogels in Tissue Engineering 59Luminita Ioana Buruiana and Silvia Ioan 3.1 Introduction 59 3.2 Classification of Hydrogels 60 3.3 Methods of Hydrogels Preparation 61 3.4 Hydrogels Characterization 63 3.4.1 Mechanical Properties 64 3.4.2 Chemical-Physical Analysis 64 3.4.3 Morphological Characterization 64 3.4.4 Swelling Behavior 65 3.4.5 Rheology Measurements 65 3.5 Hydrogels Applications in Biology and Medicine 66 3.5.1 Hydrogel Scaffolds in Tissue Engineering 66 3.5.2 Hydrogels in Drug Delivery Systems 70 3.6 Concluding Remarks 73 References 74 4 Smart Hydrogels: Application in Bioethanol Production 79Lucinda Mulko, Edith Yslas, Silvestre Bongiovanni Abel, Claudia Rivarola, Cesar Barbero and Diego Acevedo 4.1 Hydrogels 79 4.2 History of Hydrogels 80 4.3 The Water in Hydrogels 81 4.4 Classifications of Hydrogels 81 4.5 Synthesis 82 4.6 Hydrogels Synthesized by Free Radical Polymerization 83 4.7 Monomers 84 4.8 Initiators 84 4.9 Cross-Linkers 84 4.10 Hydrogel Properties 85 4.11 Mechanical Properties 87 4.12 Biocompatible Properties 87 4.13 Hydrogels: Biomedical Applications 88 4.14 Techniques and Supports for Immobilization 89 4.15 Entrapment 89 4.16 Covalent Binding 90 4.17 Cross-Linking 91 4.18 Adsorption 91 4.19 Hydrogel Applications in Bioethanol Production 92 4.20 Classification of Biofuels 92 4.21 Ethanol Properties 93 4.22 Ethanol Production 95 4.23 Feedstock Pretreatment 95 4.24 Liquefaction and Saccharification Reactions 97 4.25 Fermentation Process 97 4.26 Continuous or Discontinuous Process? 98 4.27 Simultaneous Saccharification and Fermentation (SSF) Processes 98 4.28 Yeast and Enzymes Immobilized 99 References 100 5 Principle Renewable Biopolymers and Their Biomedical Applications 107İlayda Duru, Oznur Demir Oğuz, Hayriye Oztatlı, Duygu Ceren Arıkfidan, Hatice Kaya, Elif Donmez and Duygu Ege 5.1 Collagen 107 5.2 Elastin 111 5.3 Silk Fibroin 114 5.4 Chitosan 116 5.5 Chondroitin Sulfate 119 5.6 Cellulose 121 5.7 Hyaluronic Acid 123 5.8 Poly(L-lysine) 126 References 128 6 Application of Hydrogel Biocomposites for Multiple Drug Delivery 139S.J. Owonubi, S.C. Agwuncha, E. Mukwevho, B.A. Aderibigbe, E.R. Sadiku, O.F. Biotidara and K. Varaprasad 6.1 Introduction 140 6.2 Sustained Drug Release Systems 142 6.3 Controlled Release Systems 143 6.3.1 Half-Life of the Drug Formulation 143 6.3.2 Absorption 143 6.3.3 Metabolism 143 6.3.4 Dosage Size 144 6.3.5 pH Stability and Aqueous Stability of the Drug Formulation 144 6.3.6 Barrier Co-Efficient 144 6.3.7 Stability 144 6.4 Polymeric Drug Delivery Devices 146 6.5 Multiple Drug Delivery Systems 147 6.5.1 Supramolecules and In Situ-Forming Hydrogels 149 6.5.2 Layer-By-Layer Assembly 150 6.5.3 Interpenetrating Polymer Networks (IPNs) 150 6.5.4 Application of Hydrogels for Multiple Drug Delivery 151 6.5.5 Cancer Treatments 151 6.5.6 Diabetes Treatments 152 6.6 Tissue Engineering 153 6.6.1 Self-Healing 154 6.6.2 Molecular Sensing 155 6.7 Conclusion 155 References 155 7 Non-Toxic Holographic Materials (Holograms in Sweeteners) 167Arturo Olivares-Perez 7.1 Introduction 167 7.2 Sugars as Holographic Recording Medium 168 7.2.1 Classification and Nomenclature 168 7.2.2 Monosaccharides/Glucose and Fructose 169 7.2.2.1 Glucose 169 7.2.2.2 Fructose 171 7.2.2.3 Disaccharides Sucrose 171 7.2.2.4 Polysaccharides, Pectins 174 7.2.2.5 Sweeteners Corn Syrup 175 7.3 Photosensitizers 176 7.3.1 Dyes 177 7.3.2 Dyes as Sensitizers 177 7.4 Sucrose Preparation and Film Generation 179 7.4.1 UV-Visible Spectral Analysis 180 7.4.2 Replication of Holographic Gratings is Sucrose 181 7.4.2.1 Holographic Code 181 7.4.2.2 Soft Mask 181 7.4.2.3 Thermosensitive Properties Through Mask 181 7.4.2.4 Replication 182 7.4.2.5 Diffraction Efficiency 183 7.4.3 Sucrose With Dyes 185 7.4.3.1 Sugar UV-Visible Spectral Analysis 185 7.4.3.2 Holographic Replicas 186 7.4.3.3 DE Sugar Tartrazine and Erioglaucine Dye 187 7.5 Corn Syrup 188 7.5.1 Holographic Replicas of Low and High Frequency 189 7.5.2 DE Corn Syrup 191 7.6 Hydrophobic Materials 192 7.6.1 Hydrophobic Mixture of Pectin Sucrose and Vanilla 192 7.6.2 UV-Visible Spectral Analysis 192 7.6.3 Holographic Replicas 192 7.6.4 DE Hydrophobic Films PSV 193 7.7 PSV with Dyes 194 7.7.1 UV-Visible Spectral Analysis 194 7.7.2 DE Films PSV and Erioglaucine 194 7.8 Pineapple Juice as Holographic Recording Material 195 7.8.1 Characterization of Pineapple Juice 196 7.8.2 Generation of Pineapple Films 196 7.8.3 Replication Technique 196 7.8.4 DE Pineapple Film 196 7.9 Holograms Made with Milk 198 7.9.1 Low-Fat Milk Tests 198 7.9.2 DE Milk Gratings 198 7.9.2.1 Gravity Technique 198 7.9.2.2 Spinner Technical 199 7.10 Conclusions 200 Acknowledgements 200 References 200 8 Bioplasitcizer Epoxidized Vegetable Oils–Based Poly(Lactic Acid) Blends and Nanocomposites 205Buong Woei Chieng, Nor Azowa Ibrahim and Yuet Ying Loo 8.1 Introduction 205 8.2 Vegetable Oils 207 8.3 Expoxidation of Vegetable Oils 209 8.4 Poly(lactic acid) 211 8.5 Poly(lactic acid)/Epoxidized Vegetable Oil Blends 213 8.5.1 Poly(lactic acid)/Epoxidized Palm Oil Blend 213 8.5.2 Poly(lactic acid)/Epoxidized Soybean Oil Blend 217 8.5.3 Poly(lactic acid)/Epoxidized Sunflower Oil Blend 219 8.5.4 Poly(lactic acid)/Epoxidized Jatropha Oil Blend 220 8.6 Polymer/Epoxidized Vegetable Oil Nanocomposites 223 8.7 Summary 227 References 227 9 Preparation, Characterization, and Adsorption Properties of Poly(DMAEA) – Cross-Linked Starch Gel Copolymer in Wastewater 233Sudhir Kumar Saw 9.1 Introduction 233 9.2 Experimental Procedure 237 9.2.1 Materials 237 9.2.2 Instrumentation 237 9.2.3 Preparation of Cross-Linked Starch Gel 238 9.2.4 Preparation of Poly(DMAEA) – Cross-Linked Starch Gel Graft Copolymer 238 9.2.5 Determination of Nitrogen 239 9.2.6 Experimental Process of Removal of Heavy Metal Ions 239 9.2.7 Removal of Dyes 240 9.2.8 Recovery of the Prepared Copolymer 240 9.3 Results and Discussion 240 9.3.1 Effect of pH 240 9.3.2 Effect of Extent of Grafting on Metal Removal 242 9.3.3 Effect of Adsorbent Dose Used 243 9.3.4 Effect of Treatment Time on the Metal Removal 243 9.3.5 Effect of Agitation Speed 244 9.3.6 Effect of Temperature 245 9.3.7 Recovery of Starch 247 9.3.8 Removal of Dyes 247 9.3.9 Adsorption Kinetics 248 9.3.10 Adsorption Isotherm 249 9.4 Conclusions 250 Acknowledgement 251 References 251 10 Study of Chitosan Cross-Linking Genipin Hydrogels for Absorption of Antifungal Drugs Using Molecular Modeling 255Norma Aurea Rangel–Vazquez 10.1 Introduction 255 10.1.1 Polymers 255 10.1.1.1 Properties 256 10.1.2 Natural Polymers 257 10.1.2.1 Chitosan 258 10.1.3 Hydrogels 260 10.1.3.1 Applications 261 10.1.4 Antifungals 261 10.1.4.1 Classification 261 10.1.4.2 Fluconazole 262 10.1.4.3 Voriconazole 263 10.1.4.4 Ketoconazole 263 10.1.5 Molecular Modeling 264 10.2 Methodology 265 10.2.1 Geometry Optimization (ΔG) 265 10.2.2 Bond Lengths 265 10.2.3 FTIR 267 10.2.4 MESP 269 10.3 Results and Discussions 269 10.3.1 Gibbs Free Energy 269 10.3.2 Bond Lengths 270 10.3.3 FTIR 271 10.3.4 MESP 274 10.3.5 HOMO/LUMO Orbitals 275 10.5.4 Conclusions 281 References 282 11 Pharmaceutical Delivery Systems Composed of Chitosan 285Livia N. Borgheti-Cardoso, Fabiana T.M.C. Vicentini, Marcilio S.S. Cunha Filho and Guilherme M. Gelfuso 11.1 Introduction 285 11.2 Chitosan Micro- and Nanoparticles 286 11.2.1 Oral Applications 287 11.2.2 Topical Formulations 288 11.2.3 Ocular Delivery Systems 289 11.3 Bioadhesive Chitosan Hydrogels 291 11.3.1 Ocular Gel Formulations 292 11.3.2 Topical Formulations 293 11.4 Chitosan Topical/Transdermal Films 295 11.5 Chitosan as Coating Material to Produce Lipid Capsules, Liposomes, Metallic and Magnetic Nanoparticles 296 11.6 Oral Beads Based on Chitosan for Controlled Delivery of Drugs 298 11.7 Conclusion 300 Acknowledgement 300 References 300 12 Eco-Friendly Polymers for Food Packaging 309Sweetie R. Kanatt, Shobita. R. Muppalla and S.P. Chawla 12.1 Introduction 309 12.2 Sources of Biopolymers 311 12.2.1 Polymers Extracted from Biomass 311 12.2.2 Polysaccharides 312 12.2.2.1 Starch 312 12.2.2.2 Corn Starch 313 12.2.2.3 Cassava Starch 314 12.2.2.4 Potato Starch 314 12.2.2.5 Konjac Glucomannan 314 12.2.2.6 Starch Modifications 314 12.2.3 Cellulose 315 12.2.3.1 Cellulose Derivatives 316 12.2.4 Gums 316 12.2.4.1 Guar Gum 316 12.2.4.2 Locust Bean Gum 317 12.2.4.3 Gum Arabic 318 12.2.4.4 Pectin 318 12.2.4.5 Chitin and Chitosan 319 12.2.5 Proteins 319 12.2.5.1 Zein 320 12.2.5.2 Wheat Gluten 321 12.2.5.3 Soy Protein 321 12.2.5.4 Whey Protein and Casein 321 12.2.5.5 Collagen 322 12.2.6 Lipids 322 12.2.7 Polymers Obtained from Microbial Sources 323 12.2.7.1 Agar 323 12.2.7.2 Alginate 323 12.2.7.3 Carrageenan 324 12.2.7.4 Gellan 324 12.2.7.5 Pullulan 325 12.2.7.6 Xanthan 325 12.2.7.7 Bacterial Cellulose 326 12.2.7.8 Polyhydroxyalkonates (PHA) 326 12.2.8 Polymers Synthesized from Bio-Derived Monomers 326 12.2.8.1 Polylactic Acid (PLA) 326 12.3 Properties of Biopolymer Packaging Films 327 12.3.1 Physical Properties 327 12.3.1.1 Permeability 327 12.3.1.2 Oxygen Transmission Rate (OTR) 328 12.3.1.3 Water Vapor Transmission Rate (WVTR) 329 12.3.1.4 Carbon Dioxide Transmission Rate (CO2TR) 330 12.3.2 Mechanical Properties 330 12.3.3 Thermal Properties 331 12.3.4 Degradation 332 12.3.4.1 Biodegradation 332 12.4 Composite Films 333 12.5 Bionanocomposites 335 12.6 Methods for Film Processing 335 12.6.1 Casting 336 12.6.2 Extrusion 336 12.6.3 Injection Molding 336 12.6.4 Blow Molding 337 12.6.5 Thermoforming 337 12.6.6 Foamed Products 337 12.7 Applications of Biopolymers in Food Packaging 338 12.7.1 Biodegradable Packaging Material 338 12.7.2 Active Packaging 338 12.7.3 Biopolymers as Edible Packaging 339 12.7.3.1 Edible Coating 339 12.7.3.2 Fruits and Vegetables 340 12.7.3.3 Flesh Foods 341 12.7.3.4 Seafoods 341 12.7.3.5 Meat and Meat Products 341 12.7.3.6 Eggs 341 12.7.3.7 Nuts 342 12.7.3.8 Dairy Products 342 12.7.4 Edible Films 343 12.7.4.1 Fruits and Vegetables 343 12.7.4.2 Flesh Foods 343 12.7.5 Intelligent Packaging 344 12.8 Conclusion and Future Prospects 344 References 345 13 Influence of Surface Modification on the Thermal Stability and Percentage of Crystallinity of Natural Abaca Fiber 353Basavaraju Bennehalli, Srinivasa Chikkol Venkateshappa, Rama Devi Punyamurthy, Dhanalakshmi Sampathkumar and Raghu Patel Gowdru Rangana Gowda 13.1 Introduction 353 13.2 Materials and Methods 355 13.2.1 Materials 355 13.2.2 Alkali Treatment of Abaca Fiber 355 13.2.3 Acrylic Acid Treatment of Abaca Fiber 356 13.2.4 Acetylation of Abaca Fiber 356 13.2.5 Benzoylation of Abaca Fiber 356 13.2.6 Permanganate Treatment of Abaca Fiber 356 13.2.7 Fourier Transform Infrared Spectroscopy (FTIR) 356 13.2.8 Thermogravimetric Analysis (TGA) 356 13.2.9 X-Ray Diffraction Analysis (XRD) 357 13.3 Results and Discussion 357 13.3.1 Chemical Treatment of Fibers 357 13.3.2 IR Spectra of Fibers 358 13.3.3 Thermogravimetric Analysis (TGA) 361 13.3.4 X-Ray Diffraction Analysis (XRD) 369 13.4 Conclusions 373 References 373 14 Influence of the Use of Natural Fibers in Composite Materials Assessed on a Life Cycle Perspective 377Hugo Carvalho, Ana Raposo, Ines Ribeiro, Paulo Pecas, Arlindo Silva and Elsa Henriques 14.1 Introduction 377 14.2 Composite Materials: An Overview 379 14.2.1 Composites Design 380 14.2.2 Fiber-Reinforced Composites and Natural Fibers 380 14.2.3 World Production of Natural Fibers 381 14.3 Methodology 382 14.4 Case Study: Bonnet Component 383 14.4.1 Boundary Conditions and Loading 384 14.4.2 Materials 384 14.4.3 Technical Requirements 385 14.4.4 Design Specifications 387 14.5 Life Cycle Stages 389 14.5.1 Raw Material Acquisition 389 14.5.2 Transport 389 14.5.3 Manufacturing Phase 390 14.5.4 Use Phase 391 14.5.5 End of Life Phase 391 14.6 Results 391 14.6.1 Economic Dimension Evaluation 391 14.6.2 Environmental Dimension Evaluation 392 14.6.3 Technical Results 392 14.6.4 Global Evaluation 394 14.6.4.1 Sensitivity Analysis to the Life Cycle Stages 394 14.7 Conclusion 395 References 396 15 Plant Polysaccharides Blended Ionotropically Gelled Alginate Multiple Unit Systems for Sustained Drug Release 399Dilipkumar Pal and Amit Kumar Nayak 15.1 Introduction 399 15.2 Plant Polysaccharide in Sustained Release Drug Delivery 401 15.3 Alginates and Their Ionotropic Gelation 402 15.4 Various Plant Polysaccharides-Blended Ionotropically-Gelled Alginate Microparticles/Beads 406 15.4.1 Locust Bean Bum-Alginate Blends 406 15.4.2 Gum Arabic-Alginate Blends 411 15.4.3 Tamarind Seed Polysaccharide-Alginate Blends 412 15.4.4 Okra Gum-Alginate Blends 417 15.4.5 Fenugreek Seed Mucilage-Alginate Blends 421 15.4.6 Ispaghula Husk Mucilage-Alginate Blends 423 15.4.7 Aloe Vera Gel-Alginate Blends 424 15.4.8 Sterculia Gum-Alginate Blends 425 15.4.9 Jackfruit Seed Starch-Alginate Blends 428 15.4.10 Potato Starch-Alginate Blends 430 15.5 Conclusion 431 References 431 16 Vegetable Oil-Based Polymer Composites: Synthesis, Properties and Their Applications 441Shubhalakshmi Sengupta and Dipa Ray 16.1 Introduction 441 16.2 Vegetable Oils 442 16.2.1 Composition and Structure of Vegetable Oils 442 16.2.2 Properties of Vegetable Oils 443 16.3 Vegetable Oils Used for Polymers and Composites 444 16.3.1 Synthesis of Polymeric Materials from Vegetable Oils 444 16.3.2 Modification of Vegetable Oils and Their Use in Composites 447 16.3.2.1 Epoxidized Vegetable Oils and Their Composites 447 16.3.2.2 Maleated Vegetable Oils and Their Composites 454 16.3.3 Cationic Polymerization of Vegetable Oils and Their Composites 460 16.4 Free Radical Polymerization of Vegetable Oils and Their Composites 465 16.5 Application Possibilities and Future Directions 465 References 466 17 Applications of Chitosan Derivatives in Wastewater Treatment 471Taslim U. Rashid, Md. Sazedul Islam, Sadia Sharmeen, Shanta Biswas, Asaduz Zaman, M. Nuruzzaman Khan, Abul K. Mallik, Papia Haque and Mohammed Mizanur Rahman 17.1 Introduction 471 17.2 Chitin and Chitosan 473 17.2.1 Sources of Chitin and Chitosan 474 17.2.2 Extraction of Chitosan 474 17.2.3 Properties of Chitosan 475 17.2.3.1 Degradation 477 17.2.3.2 Molecular Weight 477 17.2.3.3 Solvent Properties 477 17.2.3.4 Mechanical Properties 477 17.2.3.5 Adsorption 478 17.2.3.6 Cross-Linking Properties of Chitosan 478 17.2.3.7 Antioxidant Properties 479 17.2.4 Applications of Chitosan 480 17.3 Chitosan Derivatives in Wastewater Treatment 481 17.3.1 Carboxymethyl-Chitosan (CMC) 481 17.3.2 Ethylenediaminetetraaceticacid (EDTA) and Diethylenetriaminepentaacetic Acid (DTPA) Modified Chitosan 483 17.3.3 Triethylene-Tetramine Grafted Magnetic Chitosan (Fe3O4-TETA-CMCS) 484 17.3.4 Carboxymethyl-Polyaminate Chitosan (DETA-CMCHS) 486 17.3.5 Tetraethylenepentamine (TEPA) Modified Chitosan (TEPA-CS) 487 17.3.6 Ethylenediamine Modified Chitosan (EDA-CS) 488 17.3.7 Epichlorohydrin Cross-Linked Succinyl Chitosan (SCCS) 489 17.3.8 N-(2 -Hydroxy-3 Mercaptopropyl)-Chitosan 490 17.3.9 Epichlorohydrin Cross-Linked Chitosan (ECH-Chitosan) 490 17.3.10 Quaternary Chitosan Salt (QCS) 492 17.3.11 Magnetic Chitosan-Isatin Schiff ’s Base Resin (CSIS) 492 17.3.12 Chitosan-Fe(III) Hydrogel 493 17.4 Adsorption of Heavy Metals on Chitosan Composites from Wastewater 493 17.4.1 α-Fe2O3 impregnated Chitosan Beads With As(III) as Imprinted Ions 493 17.4.2 Chitosan/Cellulose Composites 494 17.4.3 Chitosan/Clinoptilolite Composite 495 17.4.4 Chitosan/Sand Composite 496 17.4.5 Chitosan/Bentonite Composite 496 17.4.6 Chitosan/Cotton Fiber 497 17.4.7 Magnetic Thiourea-Chitosan Imprinted Ag+ 498 17.4.8 Nano-Hydroxyapatite Chitin/Chitosan Hybrid Biocomposites 498 17.5 Adsorption of Dyes on Chitosan Composites from Wastewater 499 17.5.1 Fe2O3/Cross-Linked Chitosan Adsorbent 499 17.5.2 Chitosan-Lignin Composite 500 17.5.3 Chitosan–Polyaniline/ZnO Hybrid Composite 501 17.5.4 Coalesced Chitosan Activated Carbon Composite 502 17.5.5 Chitosan/Clay Composite 502 17.6 Conclusion 504 References 504 18 Novel Lignin-Based Materials as Products for Various Applications 519Łukasz Klapiszewski and Teofil Jesionowski 18.1 Lignin – A General Overview 519 18.1.1 A Short History 519 18.1.2 Synthesis and Structural Aspects 521 18.1.3 Types of Lignin 523 18.1.4 Applications of Lignin 528 18.2 Lignin/Silica-Based Hybrid Materials 531 18.3 Combining of Lignin and Chitin 535 18.4 Lignin-Based Products as Functional Materials 540 References 543 19 Biopolymers from Renewable Resources and Thermoplastic Starch Matrix as Polymer Units of Multi–Component Polymer Systems for Advanced Applications 555Carmen–Alice Teacă and Ruxanda Bodirlău 19.1 Introduction 555 19.2 Thermoplastic Starch Matrix and its Application for Advanced Composite Materials 557 19.3 Biopolymers from Sustainable Renewable Sources 558 19.3.1 Chitin 558 19.3.2 Wheat Straw 559 19.3.3 Spruce Bleached Kraft Pulp 559 19.4 Thermoplastic Starch as Polymer Matrix and Biopolymers from Renewable Resources for Composite Materials 560 19.4.1 Obtainment 560 19.4.1.1 Materials 561 19.4.1.2 Preparation of Composites Based on Plasticized Starch and Biopolymers with Addition of Vegetal Fillers 561 19.4.2 Investigation Methods and Properties 562 19.4.2.1 FTIR Spectroscopy Analysis 562 19.4.2.2 Water Uptake Measurements 563 19.4.2.3 Optical Properties 567 19.4.2.4 Evaluation of the Fillers’ Particle Size 570 19.5 Conclusions 570 Acknowledgements 572 References 572 20 Chitosan Composites: Preparation and Applications in Removing Water Pollutants 577Mohammad Reza Ganjali, Morteza Rezapour, Farnoush Faridbod and Parviz Norouzi 20.1 Introduction to Chitosan 577 20.1.1 Other Derivatives of Chitin 580 20.1.2 Properties of Chitosan 580 20.1.3 Modification and Derivatization of Chitosan 581 20.2 Chitosan Composites 583 20.2.1 Activated Clay-Chitosan (ACC) Composites 583 20.2.1.1 Attapulgite Clay-Nanocomposite 583 20.2.1.2 Composites of Bentonite, Montmorillonite, and Other Types of Clay 584 20.2.2 Alginate-Chitosan (AC) Composites 589 20.2.3 Cellulose-Chitosan (CC) Composites 589 20.2.3.1 Cotton Fiber-Chitosan Composites 591 20.2.4 Ceramic Alumina-Chitosan Composites 592 20.2.5 Hydroxyapatite-Chitosan Composites 596 20.3 Palm Oil Ash-Chitosan Composites 598 20.4 Perlite-Chitosan Composites 598 20.5 Polymer-Chitosan Composites 599 20.5.1 Polyurethane-Chitosan Composites 599 20.5.2 Polyvinyl Alcohol-Chitosan Composites 602 20.5.3 Polyacrylamide-Chitosan Composites 605 20.5.4 Polymethylmethacrylate-Chitosan Composites 607 20.5.5 Poly(methacrylic acid)-Chitosan Composites 611 20.5.6 Polyvinyl Chloride-Chitosan Composites 612 20.5.7 Molecular Imprinted-Chitosan Composites 613 20.6 Sand-Chitosan Composites 619 20.7 Magnetic Nano-Adsorbents or Micro-Adsorbent 619 20.7.1 Chitosan-Based Magnetic Particles 620 20.7.2 Modified-Chitosan or Chitosan-Polymer Based Magnetic Composites 627 20.7.3 Magnetic Chitosan-Carbon Composites 645 20.7.4 Magnetic Composites of Chitosan with Inorganic Compounds 649 References 652 21 Recent Advances in Biopolymer Composites for Environmental Issues 673Mazhar Ul Islam, Shaukat Khan, Muhammad Wajid Ullah and Joong Kon Park 21.1 Introduction 673 21.2 Historical Background 674 21.3 Some Important Biopolymers 677 21.3.1 Bio-Cellulose 678 21.3.2 Xanthan and Dextran 679 21.3.3 Poly(hydroxyalkanoates) 680 21.3.4 Polylactide 680 21.3.5 Poly(trimethylene terephthalate) 681 21.4 Biopolymer Composites 681 21.5 Biodegradability of Biopolymers: An Important Feature for Addressing Environmental Concerns 682 21.6 Environmental Aspects of Biopolymers and Biopolymer Composites 684 21.6.1 Catalytic Degradation of Contaminants 684 21.6.2 Adsorption of Pollutants 685 21.6.3 Magnetic Composites 686 21.6.4 Pollutant Sensors 686 21.7 Future Prospects 686 Acknowledgement 687 References 687 Index 693
£227.00
Cambridge University Press An Introduction to Composite Materials
Book SynopsisThis fully expanded and updated edition provides both scientists and engineers with all the information they need to understand composite materials, covering their underlying science and technological usage. It includes four completely new chapters on surface coatings, highly porous materials, bio-composites and nano-composites, as well as thoroughly revised chapters on fibres and matrices, the design, fabrication and production of composites, mechanical and thermal properties, and industry applications. Extensively expanded referencing engages readers with the latest research and industrial developments in the field, and increased coverage of essential background science makes this a valuable self-contained text. A comprehensive set of homework questions, with model answers available online, explains how calculations associated with the properties of composite materials should be tackled, and educational software accompanying the book is available online. An invaluable text for final-Trade Review'This introductory textbook goes beyond the descriptive level and the usual engineering approximations to a deeper, yet accessible, level of fundamental composite mechanics that provides valuable insights into composite performance.' William Curtin, École polytechnique fédérale de Lausanne'Composite materials combine and comprise an understanding of materials science, mechanics and general engineering. The third edition of An Introduction to Composite Materials by T. W. Clyne and D. Hull is an carefully revised version of the previous very successful textbook. It is a comprehensive summary of the current knowledge in composites science and technology - specially prepared as a textbook for young scientists and graduate students to get a substantial insight into this still young area. I personally recommend this book to my graduate students.' Karl Schulte, Technische Universität Hamburg'This extensively revised and expanded edition includes the latest developments in composites research and applications. The new chapters on surface coatings, highly porous materials, bio- and nano-composites are uniquely valuable.' Tsu-Wei Chou, University of DelawareTable of ContentsPreface; Nomenclature; 1. General introduction; 2. Fibres, matrices and their architecture in composites; 3. Elastic deformation of long fibre composites; 4. Tensor analysis of anisotropic materials and the elastic deformation of laminae; 5. Elastic deformation of laminates; 6. Stresses and strains in short fibre and particulate composites; 7. The interface region; 8. Stress-based treatment of the strength of composites; 9. Fracture mechanics and the toughness of composites; 10. Thermal effects in composites; 11. Surface coatings as composite systems; 12. Highly porous materials as composite systems; 13. Biocomposites and recycling; 14. Scale effects and nanocomposites; 15. Fabrication of composites; 16. Applications of composites; Appendix: questions; Index.
£47.49
John Wiley & Sons Inc Developments in Strategic Materials and
Book SynopsisThis book is a collection of papers from The American Ceramic Society''s 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Thermal Management Materials and Technologies; Advanced Sensor Technology; Geopolymers; and Computational Design, Modeling, and Simulation of Ceramics and Composites symposia.Table of ContentsPreface ix Introduction xi GEOPOLYMERS AND OTHER INORGANIC POLYMERS Effect of External and Internal Calcium in Fly Ash on Geopolymer Formation 3 Kiatsuda Somna and Walairat Bumrongjaroen Synthesis and Thermal Properties of Fly-Ash Based Geopolymer Pastes and Mortars 17 Ch. Panagiotopoulou, A. Asprogerakas, G. Kakali, and S. Tsivilis Mechanical Response of Discontinuous Filament PVA Fiber Reinforced Geopolymers 29 Benjamin Varela and Jeffrey W. Rogers Microwave Enhanced Drying and Firing of Geopolymers 35 Tyler A Gubb, Inessa Baranova, Shawn M. Allan, Morgana L. Fall, Holly S. Shulman, and Waltraud M. Kriven Geopolymerization of Red Mud and Rice Husk Ash and Potentials of the Resulting Geopolymeric Products for Civil Infrastructure Applications 45 Jian He and Guoping Zhang The Effect of Addition of Pozzolanic Tuff on Geopolymers 53 Hani Khoury, Islam Al Dabsheh, Faten Slaty, Yousef Abu Salha, Hubert Rahier, Muayad Esaifan, and Jan Wastiels Bottom Ash-Based Geopolymer Materials: Mechanical and Environmental Properties 71 R. Onori, J. Will, A. Hoppe, A. Polettini, R. Pomi, and A. R. Boccaccini Production of Geopolymers from Untreated Kaolinite 83 H. Rahier, M. Esaifan, I. Aldabsheh, F. Slatyi, H. Khoury, and J. Wastiels Phosphate Geopolymers 91 Arun S. Wagh THERMAL MANAGEMENT MATERIALS AND TECHNOLOGIES 3-Dimensional Modeling of Graphitic Foam Heat Sink 107 Adrian Bradu and Khairul Alam Enhancement of Heat Capacity of Molten Salt Eutectics using Inorganic Nanoparticles for Solar Thermal Energy Applications 119 Donghyun Shin and Debjyoti Banerjee Enhancement of Heat Capacity of Nitrate Salts using Mica Nanoparticles 127 Seunghwan Jung and Debjyoti Banerjee Enhanced Viscosity of Aqueous Silica Nanofluids 139 Byeongnam Jo and Debjyoti Banerjee Pumping Power of 50/50 Mixtures of Ethylene Glycol/Water Containing SiC Nanoparticles 147 Jules L. Routbort, Dileep Singh, Elena V. Timofeeva, Wenhua Yu, David M. France, and Roger K. Smith COMPUTATIONAL DESIGN Characterization of Non Uniform Veneer Layer Thickness Distribution on Curved Substrate Zirconia Ceramics using X-Ray Micro-Tomography 155 M. Allahkarami, H. A. Bale, and J. C. Hanan Computational Study of Wave Propagation in Second-Order Nonlinear Piezoelectric Media 165 David A. Hopkins and George A. Gazonas Impact of Material and Architecture Model Parameters on the Failure of Woven CMCS via the Multiscale Generalized Method of Cells 175 Kuang Liu, Aditi Chattopadhyay, and Steven M. Arnold Kinetic Monte Carlo Simulation of Oxygen and Cation Diffusion in Yttria-Stabilized Zirconia 193 Brian Good ADVANCED SENSOR TECHNOLOGY Nano-Calorimeter Platform for Explosive Sensing 209 Seok-Won Kang, Nicholas Niedbalski, Mathew R Lane, and Debjyoti Banerjee Polyaniline-Silica Nanocomposite: Application in Electrocatalysis of Acetylthiocholine 221 Prem C. Pandey, Vandana Singh, and S. Kumari Electrochemical Sensing of Dopamine over Polyindole-Composite Electrode 235 Prem C. Pandey, Dheeraj S. Chauhan, and S. Kumari Author Index 245
£70.16
ISTE Ltd and John Wiley & Sons Inc Micromechanics of Granular Materials
Book SynopsisNearly all solids are compised of grains. However most studies treat materials as a continious solid. The book applies analysis used on loose granular materials to dense grainular materials. This title’s main focus is devoted to static or dynamic loadings applied to dense materials, although rapid flows and widely dispersed media are also mentioned briefly. Three essential areas are covered: Local variable analysis: Contact forces, displacements and rotations, orientation of contacting particles and fabric tensors are all examples of local variables. Their statistical distributions, such as spatial distribution and possible localization, are analyzed, taking into account experimental results or numerical simulations. Change of scales procedures: Also known as “homogenization techniques”, these procedures make it possible to construct continuum laws to be used in a continuum mechanics approach or performing smaller scale analyses. Numerical modeling: Several methods designed to calculate approximate solutions of dynamical equations together with unilateral contact and frictional laws are presented, including molecular dynamics, the distinct element method and non-smooth contact dynamics. Numerical examples are given and the quality of numerical approximations is discussed.Trade Review"The book will be useful for students and specialists working in this scientific area." (Zentralblatt MATH, 2011) Table of ContentsIntroduction xiii Chapter 1. Experimental and Numerical Analysis of Local Variables in Granular Materials 1 Farhang RADJAÏ and Jack LANIER 1.1. Introduction 1 1.2. Description of granular texture 3 1.3. Granular kinematics 20 1.4. Force transmission 31 1.5. Conclusion 44 1.6. Bibliography 45 Chapter 2. The Stress Tensor in Granular Media and in other Mechanical Collections 51 Jean-Jacques MOREAU 2.1. Introduction 51 2.2. Efforts and virtual power 59 2.3. Equilibrium 65 2.4. Comparison with the pair-by-pair approach 76 2.5. Directions of cut 83 2.6. Coarse graining the equation of Statics 90 2.7. One step into Dynamics 91 2.8. Bibliography 97 Chapter 3. Multiscale Techniques for Granular Materials 101 Bernard CAMBOU, Alexandre DANESCU 3.1. Introduction 101 3.2. Scale change andfabric tensors 102 3.3. Change of scale for static variables . 112 3.4. Change of scale for kinematic variables in granular materials 115 3.5. Statistical homogenization in granular materials 131 3.6. Bibliography 145 Chapter 4. Numerical Simulation of Granular Materials 149 Michel JEAN 4.1. Introduction 149 4.2. The actors of a contact problem 152 4.3. Kinematic relations 167 4.4. The dynamical equation 174 4.5. Frictional contact laws 179 4.6. The equations governing a collection of contacting bodies 196 4.7. Preparing numerical samples 198 4.8. Smooth DEM numerical methods 206 4.9. Non-smooth DEM numerical methods 216 4.10. Some illustrating examples 227 4.11. Quasi-static evolutions, equilibrium dedicated methods 234 4.12. Accuracy criteria 241 4.13. Indetermination in granular materials 246 4.14. Stability 265 4.15. Numerical integration schemes 275 4.16. More non-smooth DEM methods 284 4.17. Signorini μ-Coulomb derived laws 292 4.18. Conclusion 301 4.19. Appendix: basic convex analysis 303 4.20. Bibliography 307 Chapter 5. Frictionless Unilateral Multibody Dynamics 317 Patrick BALLARD 5.1. Introduction 317 5.2. The dynamics of rigid body systems 318 5.3. The dynamics of rigid body systems with perfect bilateral constraints 322 5.4. The dynamics of rigid body systems with perfect unilateral constraints 326 5.5. Bibliography 340 List of Authors 343 Index 345
£145.30
Taylor & Francis Ltd Interfacial Transition Zone in Cementitious Composites
Book SynopsisThis book addresses the need to resolve the ITZ''s influence on engineering and durability characteristics of cementious composites, identifies the systems and properties that are affected by it, and quantifies these effects in order to prepare the base for engineering design tools. This volume presents the proceedings of the Second International RILEM conference on the Interfacial Transition Zone in cementious composites, held in Haifa, Israel in 1998.Table of ContentsInterfacial Transition Zone in Cementitious Composites (Rilem Proceedings)
£47.99
Taylor & Francis Inc Strength of Materials Third Edition
Book SynopsisStrength of Materials, 3rd Edition is ideal for students pursuing degrees in civil and mechanical engineering, as well as computer science, electronics, and instrumentation. Topics include combined stresses, centroid and the moment of inertia, shear forces and bending moments in beams, stresses in beams, the deflection of beams, torsion of circular members, springs, strain energy, the theory of elastic failure, buckling of columns, pressure vessels, and the analysis of framed structures. The general arrangement of the new edition of the book remains unchanged however the text has been thoroughly revised. Also, several new solved problems in the chapters have been added. It continues to provide students with a sound understanding of the fundamental concepts of civil structures, machine elements, and other components. A large number of New Solved Examples (about 50) have been added in the chapters such as 1, 2, 5, 6, 7, 10, and 13. Model MultipTable of ContentsSimple Stresses and Strains. Principal Stresses. Centroid and Moment of Inertia. Shear Forces and Bending Moments in Beams. Stresses in Beams. Deflection of Beams. Torsion of Circular Members. Springs. Strain Energy. Theory of Elastic Failure. Buckling of Columns. Pressure Vessels. Analysis of Framed Structures. Mechanical Testing of Materials.
£150.00