Search results for """ "Bifacial Photovoltaics""
John Wiley & Sons Inc Photovoltaics
Book SynopsisWith the explosive growth in PV (photovoltaic) installations globally, the sector continues to benefit from important improvements in manufacturing technology and the increasing efficiency of solar cells, this timely handbook brings together all the latest design, layout and construction methods for entire PV plants in a single volume.Trade ReviewReview copy sent 29/02/12: Book News Review copies sent on 2.2.12 to: ENGINEERING STRUCTURES RENEWABLE ENERGY PHOTOVOLTAICS BULLETIN SOLAR ENERGY JOURNAL OF POWER SOURCES ENERGY RESEARCH REAL POWER SOLAR WIND TECHNOLOGY MODERN POWER SYSTEMS ENERGY AND POWER RISK MANAGEMENT NEW POWERTable of ContentsForeword xiii Preface xv About the Author xvii Acknowledgements xix Note on the Examples and Costs xxi List of Symbols xxiii 1 Introduction 1 1.1 Photovoltaics – What’s It All About? 1 1.2 Overview of This Book 1 1.3 A Brief Glossary of Key PV Terms 10 1.4 Recommended Guide Values for Estimating PV System Potential 14 1.5 Examples 24 1.6 Bibliography 25 2 Key Properties of Solar Radiation 27 2.1 Sun and Earth 27 2.2 Extraterrestrial Radiation 31 2.3 Radiation on the Horizontal Plane of the Earth’s Surface 32 2.4 Simple Method for Calculating Solar Radiation on Inclined Surfaces 39 2.5 Radiation Calculation on Inclined Planes with Three-Component Model 49 2.6 Approximate Annual Energy Yield for Grid-Connected PV Systems 68 2.7 Composition of Solar Radiation 71 2.8 Solar Radiation Measurement 71 2.9 Bibliography 76 3 Solar Cells: Their Design Engineering and Operating Principles 79 3.1 The Internal Photoelectric Effect in Semiconductors 79 3.2 A Brief Account of Semiconductor Theory 81 3.3 The Solar Cell: A Specialized Semiconductor Diode With a Large Barrier Layer that is Exposed to Light 86 3.4 Solar Cell Efficiency 94 3.5 The Most Important Types of Solar Cells and the Attendant Manufacturing Methods 108 3.6 Bifacial Solar Cells 122 3.7 Examples 122 3.8 Bibliography 124 4 Solar Modules and Solar Generators 127 4.1 Solar Modules 127 4.2 Potential Solar Cell Wiring Problems 138 4.3 Interconnection of Solar Modules and Solar Generators 149 4.4 Solar Generator Power Loss Resulting from Partial Shading and Mismatch Loss 160 4.5 Solar Generator Structure 166 4.6 Examples 217 4.7 Bibliography 221 5 PV Energy Systems 223 5.1 Stand-alone PV Systems 223 5.2 Grid-Connected Systems 262 5.3 Bibliography 389 6 Protecting PV Installations Against Lightning 395 6.1 Probability of Direct Lightning Strikes 395 6.2 Lightning Strikes: Guide Value; Main Effects 398 6.3 Basic Principles of Lightning Protection 400 6.4 Shunting Lightning Current to a Series of Down-conductors 402 6.5 Potential Increases; Equipotential Bonding 404 6.6 Lightning-Current-Induced Voltages and Current 408 6.7 PV Installation Lightning Protection Experiments 432 6.8 Optimal Sizing of PV Installation Lightning Protection Devices 459 6.9 Recommendations for PV Installation Lightning Protection 470 6.1 Recap and Conclusions 484 6.11 Bibliography 485 7 Standardized Representation of Energy and Power of PV Systems 487 7.1 Introduction 487 7.2 Standardized Yield, Losses and Performance Ratio 487 7.3 Normalized Diagrams for Yields and Losses 491 7.4 Normalized PV Installation Power Output 495 7.5 Anomaly Detection Using Various Types of Diagrams 502 7.6 Recap and Conclusions 506 7.7 Bibliography 506 8 PV Installation Sizing 507 8.1 Principal of and Baseline Values for Yield Calculations 507 8.2 Energy Yield Determination for Grid-Connected Systems 523 8.3 Sizing PV Installations that Integrate a Battery Pack 533 8.4 Insolation Calculation Freeware 549 8.5 Simulation Software 550 8.6 Bibliography 9 The Economics of Solar Power 551 9.1 How Much Does Solar Energy Cost? 553 9.2 Grey Energy; Energy Payback Time; Yield Factor 562 9.3 Bibliography 566 10 Performance Characteristics of Selected PV Installations 569 10.1 Energy Yield Data and Other Aspects of Selected PV Installations 569 10.2 Long Term Comparison of Four Swiss PV Installations 614 10.3 Long Term Energy Yield of the Burgdorf Installation 617 10.4 Mean PV Installation Energy Yield in Germany 619 10.5 Bibliography 620 11 In Conclusion… 623 Annex A: Calculation Tables and Insolation Data 633 A1 Insolation Calculation Tables 633 A2 Aggregate Monthly Horizontal Global Irradiance 634 A3 Global Insolation for Various Reference Locations 634 A4 RB Factors for Insolation Calculations Using the Three-Component Model 648 A5 Shading Diagrams for Various Latitudes 673 A6 Energy Yield Calculation Tables 676 A7 kT and kG Figures for Energy Yield Calculations 681 A8 Insolation and Energy Yield Calculation Maps 683 A8.1 Specimen polar shading diagram Appendix B: Links; Books; Acronyms; etc. 691 B1 Links to PV Web Sites 691 B2 Books on Photovoltaic and Related Areas 693 B3 Acronyms 695 B4 Prefixes for Decimal Fractions and Metric Multiples 696 B5 Conversion Factors 696 B6 Key Physical Constants 696 Index 697
£92.66
John Wiley & Sons Inc Photovoltaic Modeling Handbook
Book SynopsisThis book provides the reader with a solid understanding of the fundamental modeling of photovoltaic devices. After the material independent limit of photovoltaic conversion, the readers are introduced to the most well-known theory of classical silicon modeling. Based on this, for each of the most important PV materials, their performance under different conditions is modeled. This book also covers different modeling approaches, from very fundamental theoretic investigations to applied numeric simulations based on experimental values. The book concludes wth a chapter on the influence of spectral variations. The information is supported by providing the names of simulation software and basic literature to the field. The information in the book gives the user specific application with a solid background in hand, to judge which materials could be appropriate as well as realistic expectations of the performance the devices could achieve.Table of ContentsPreface xiii 1 Introduction 1Monika Freunek Müller 2 Fundamental Limits of Solar Energy Conversion 7Thorsten Trupke and Peter Würfel 2.1 Introduction 8 2.2 The Carnot Efficiency – A Realistic Limit for PV Conversion? 8 2.3 Solar Cell Absorbers – Converting Heat into Chemical Energy 10 2.4 No Junction Required – The IV Curve of a Uniform Absorber 12 2.5 Limiting Efficiency Calculations 15 2.6 Real Solar Cell Structures 19 2.7 Beyond the Shockley Queisser Limit 20 2.8 Summary and Conclusions 22 Acknowledgement 23 References 24 3 Optical Modeling of Photovoltaic Modules with Ray Tracing Simulations 27Carsten Schinke, Malte R.Vogt and Karsten Bothe 3.1 Introduction 28 3.1.1 Terminology 30 3.2 Basics of Optical Ray Tracing Simulations 32 3.2.1 Ray Optics 32 3.2.1.1 Basic Assumptions 33 3.2.1.2 Absorption of Light 33 3.2.1.3 Refraction of Light at Interfaces 34 3.2.1.4 Modeling of Thin Films 35 3.2.2 Ray Tracing 37 3.2.3 Monte-Carlo Particle Tracing 38 3.2.4 Statistical Uncertainty of Monte-Carlo Results 40 3.2.5 Generating Random Numbers with Non-Uniform Distributions 42 3.3 Modeling Illumination 46 3.3.1 Basic Light Sources 46 3.3.2 Modeling Realistic Illumination Conditions 48 3.3.2.1 Preprocessing of Irradiance Data 49 3.3.2.2 Implementation for Ray Tracing 50 3.3.2.3 Application Example 52 3.4 Specific Issues for Ray Tracing of Photovoltaic Modules 53 3.4.1 Geometries and Symmetries in PV Devices 55 3.4.2 Multi-Domain Approach 57 3.4.2.1 Module domain 59 3.4.2.2 Front Finger Domain 60 3.4.2.3 Front Texture Domain 60 3.4.2.4 Rear Side Domains 61 3.4.3 Post processing of Simulation Results 61 3.4.4 Ray Tracing Application Examples 64 3.4.4.1 Validation of Simulation Results 64 3.4.4.2 Optical Loss Analysis: From Cell to Module 66 3.4.4.3 Bifacial Solar Cells and Modules 68 3.5 From Optics to Power Output 69 3.5.1 Calculation Chain: From Ray Tracing to Module Power Output 70 3.5.1.1 Inclusion of the Irradiation Spectrum 73 3.5.1.2 Calculation of Module Output Power 75 3.5.1.3 Outlook: Energy Yield Calculation 75 3.5.2 Application Examples 76 3.5.2.1 Calculation of Short Circuit Current and Power Output 77 3.5.2.2 Current Loss Analysis: Standard Testing Conditions vs. Field Conditions 79 3.6 Overview of Optical Simulation Tools for PV Devices 80 3.6.1 Analysis of Solar Cells 82 3.6.2 Analysis of PV Modules and Their Surrounding 82 3.6.3 Further Tools Which are not Publicly Available 85 Acknowledgments 85 References 86 4 Optical Modelling and Simulations of Thin-Film Silicon Solar Cells 93Janez Krc, Martin Sever, Benjamin Lipovsek, Andrej Campa and Marko Topic 4.1 Introduction 94 4.2 Approaches of Optical Modelling 95 4.2.1 One-Dimensional Optical Modelling 96 4.2.2 Two- and Three-Dimensional Rigorous Optical Modelling 97 4.2.3 Challenges in Optical Modelling 97 4.3 Selected Methods and Approaches 98 4.3.1 Finite Element Method 98 4.3.2 Coupled Modelling Approach 100 4.4 Examples of Optical Modelling and Simulations 102 4.4.1 Texture Optimization Applying Spatial Fourier Analysis 103 4.4.2 Model of Non-Conformal Layer Growth 110 4.4.3 Optical Simulations of Tandem Thin-Film Silicon Solar Cell 118 4.5 The Role of Illumination Spectrum 129 4.6 Conclusion 133 Acknowledgement 134 References 135 5 Modelling of Organic Photovoltaics 141Ian R. Thompson 5.1 Introduction to Organic Photovoltaics 141 5.2 Performance of Organic Photovoltaics 143 5.3 Charge Transport in Organic Semiconductors 145 5.4 Energetic Disorder in Organic Semiconductors 150 5.5 Morphology of Organic Materials 153 5.6 Considerations for Photovoltaics 155 5.6.1 Excitons in Organic Semiconductors 155 5.6.2 Optical Absorption in Organic Photovoltaics 160 5.6.3 Carrier Harvesting in Organic Photovoltaics 161 5.7 Simulation Methods of Organic Photovoltaics 163 5.7.1 Lattice Morphologies and Device Geometry 163 5.7.2 Gaussian Disorder Model 164 5.7.3 Kinetic Monte Carlo Methods 164 5.7.4 Electrostatic Interactions 168 5.7.5 Neighbour Lists 169 5.8 Considerations When Modelling Organic Photovoltaics 169 5.8.1 The Next Steps for OPV Modelling 171 Acknowledgements 172 References 172 6 Modeling the Device Physics of Chalcogenide Thin Film Solar Cells 177Nima E. Gorji and Lindsay Kuhn 6.1 Introduction 177 6.2 Kosyachenko’s Approach: Carrier Transport 178 6.3 Demtsu-Sites Approach: Double-Diode Model 181 6.4 Kosyachenko’s Approach: Optical Loss Modeling 184 6.5 Karpov’s Approach 186 6.6 Conclusion 187 Acknowledgements 188 References 188 7 Temperature and Irradiance Dependent Efficiency Model for GaInP-GaInAs-Ge Multijunction Solar Cells 191Monika Freunek Mueller, Bruno Michel and Harold J. Hovel 7.1 Motivation 191 7.2 Efficiency Model 196 7.3 Results and Discussion 209 7.4 Conclusions 211 7.5 Acknowledgments 211 References 212 Appendix: Shockley-Queisser-Modell Calculations 213 8 Variation of Output with Environmental Factors 217Youichi Hirata, Yuzuru Ueda, Shinichiro Oke and Naotoshi Sekiguchi 8.1 Conversion Efficiency and Standard Test Conditions (STC) 218 8.2 Variation of I-V curve with Each Environmental Factor 218 8.2.1 Irradiance 219 8.2.2 Cell Temperature 221 8.2.3 Spectral Response 222 8.3 Example of Measurement of Spectral Distribution of Solar Radiation 222 8.3.1 Example of Changes with Weather 223 8.3.2 Spectral Variation with Season 225 8.3.3 Effect of Variation in Spectral Solar Radiation 226 8.4 Irradiance 227 8.5 Effects on Performance of PV Modules/Cells 229 8.5.1 System Configurations and Measurements 229 8.5.2 Evaluation Methods 231 8.5.2.1 Performance Ratio 231 8.5.2.2 Effective Array Peak Power of PV Systems 233 8.5.3 Measurement Results 233 8.5.3.1 Performance Ratios 233 8.5.3.2 Degradation Rates 234 8.6 Cell Temperature 236 8.6.1 Output Energy by Temperature Coefficient 236 8.6.2 Output Energy with Different Installation Method 237 8.7 Results for Concentrated Photovoltaics 239 8.7.1 Introduction 239 8.7.2 Field Test of a CPV Module 239 8.7.3 Decline of Efficiency of the Early-Type CPV Module 239 8.7.4 Influences of the Degradation 241 Acknowledgments 243 References 244 9 Modeling of Indoor Photovoltaic Devices 245Monika Freunek Müller 9.1 Introduction 245 9.1.1 Brief History of IPV 246 9.1.2 Characteristics of IPV Modeling 247 9.2 Indoor Radiation 248 9.2.1 Modeling Indoor Spectral Irradiance 250 9.3 Maximum Efficiencies 252 9.3.1 Intensity effects 255 9.4 Demonstrated Efficiencies and Further Optimization 257 9.5 Characterization and Measured Efficiencies 261 9.5.1 Irradiance Measurements 261 9.6 Outlook 262 9.7 Acknowledgement 264 References 264 10 Modelling Hysteresis in Perovskite Solar Cells 267James M. Cave and Alison B. Walker 10.1 Introduction to Perovskite Solar Cells 267 Acknowledgements 277 References 277 Index 279
£146.66
Taylor & Francis Ltd BuildingIntegrated Photovoltaics
Book SynopsisBuilding-integrated photovoltaics (BIPV) is an innovative technology offering a variety of building envelope solutions, materials, and colours for virtually any building surface. These BIPV products generate on-site renewable electricity, turning buildings from energy consumers to producers. BIPV is expected to play an indispensable role in the transition towards decarbonisation and energy resilience of cities, effectively reducing energy consumption and greenhouse gas emissions. Lack of knowledge and guidance on designing BIPV systems has hindered this technology''s widespread adoption and creative applications. As a remedy, this guidebook presents best practices and decision-making processes for efficient and resilient architecture. Featuring more than 50 annotated reference drawingsroofs, solar shadings, rainscreen façades, curtain walls and double skin façadesand 24 international BIPV case studies, the guidebook provides building professionals with the technical knowledge and in
£52.99
John Wiley & Sons Inc Photovoltaics from Milliwatts to Gigawatts
Book SynopsisAn essential guide through the rapid evolution of PV technology Photovoltaics from Milliwatts to Gigawatts: Understanding Market and Technology Drivers toward Terawatts covers the history of silicon based PV, from the earliest discoveries to present and future practice. Divided into 9 chapters, the book includes the following topics: Early History; The 1973 Oil crisis and the drive for alternative energies; The emergence in the 1980''s of the off grid PV market, the significant small scale PV consumer market and the establishment of a manufacturing industry; Advantages of silicon for solar cells; The evolution of PV installations; The history of the incentive programme for PV; Difficulties of alternative technologies in challenging silicon dominance; Current status of the silicon manufacturing technology and The future. Key features: An authoritative first-hand account of an emerging technology from laboratory to global significance foTable of Contents Preface Chapter 1 The Photovoltaics -the birth of a technology and its first application 1.1 Introduction 1.2 Sunlight and electricity 1.2.1 The early Years 1.2.2 The breakthrough to commercial photovoltaic cells. 1.2.3 The hiatus 1.2.4 The first successful market- Satellites 1.3 Photovoltaics demonstrates success. 1.3.1 First Commercial Operation 1.3.2 Solar Cell Manufacturing 1.4 Gallium Arsenide and III-V alloys for space. 1.4.1. Single Junction GaAs solar cells 1.4.2 Multi-junction Solar Cells for space. 1.5 Summary 1.6 References Chapter 2 The Beginnings of a Terrestrial Photovoltaic Industry 2.1 Introduction 2.2 The 1973 Oil Crisis 2.3 The Way Ahead for Terrestrial PV Technology. 2.3.1 Basic Silicon PV manufacturing Process 2.3.2 The Low Cost Silicon Solar Array Project (FPSA). 2.3.2.1 Solar Grade Silicon 2.3.2.2 Silicon Sheet Wafers and Ribbons 2.3.2.3 High Efficiency Solar Cells 2.3.2.4 Process development 2.3.2.5 Engineering Sciences and Reliability. 2.3.2.6 Module Encapsulation 2.3.2.7 Cost Goals 2.4 Rise of the USA PV Manufacturing Industry 2.5 Developments in Europe 2.5 Developments in Europe 2.6 The transition in cell technology from space to terrestrial applications 2.7 Alternatives to Silicon for Solar cells 2.8 Summary 2.9 References Chapter 3 The Early PV global market and manufacturers 3.1 Introduction 3.2 Off Grid Professional Market 3.2.1 Navigation aids. 3.2.2 Microwave Repeater Stations 3.2.3 Cathodic Protection 3.2.4 Other Applications. 3.2.5 Early Grid Connected application 3.3. Off Grid social applications 3.3.1 Solar Home systems 3.3.2 Water Pumping 3.2.3 Consumer Electronics 3.4 Summary 3.5 References Chapter 4 Silicon Technology Development to 2010 4.1 Introduction 4.2 Technologies supplying the global market. 4.3 Advantages of silicon as a solar cell material. 4.3.1 Availability 4.3.2 Elemental semiconductor 4.3.3. Non-toxic 4.3.4 Self passivating oxide 4.3.5 Synergy with global semiconductor industry. 4.4 Silicon Solar Cell Design Features 4.5 Silicon Solar cell manufacturing from 1980 to 1990. 4.6 Developments in Manufacturing Technology 4.6.1 Silicon Feedstock 4.6.2 Crystallisation 4.6.3 Wafering 4.6.4 Anti-Reflection Coating (ARC) 4.6.5 Solar Cell Development to 2000 4.6.5.1 Cz-Cell Development 4.6.5.2 Multicrystalline Silicon Processing 4.6.5.3 Integration of mono and multicrystalline silicon processes. 4.6.5.4 Other process technology changes 4.7 Module Technology 4. 8 Summary 4.9 References Chapter 5 The Current Status of PV Systems 5.1 Introduction 5.2 The off-grid market 5.3 The decentralised grid connected market. 5.3.1 Research Phase 1974-1989 5.3.2 The Demonstration Phase 1989-2000 5.3.3 Decentralised Grid connected market 2000- 2019: The Commercial phase 5.3.2.1 The achievement of grid parity 5.3.2.2 Resolution of the silicon feedstock supply. 5.4 Utility Scale Grid connected PV systems 5.5 Novel applications 5.6 Summary 5.7 References Chapter 6 History of incentives for PV 6.1 The Chicken and egg problem 6.2 Capital Subsidies on system purchase 6.3 Feed-in-Tariffs. 6.4 Power Purchase Agreements and other Incentives for large scale systems. 6.5 Summary 6.6 References Chapter 7 Difficulties of Alternative Technologies to Silicon 7.1 Introduction 7.2 Sheet Silicon Processes. 7.2.1 Direct crystallisation of silicon sheet. 7.2.1.1 Westinghouse Dendritic Web 7.2.1.2 Edge Defined Foil Growth (EFG) 7.2.1.3 String Ribbon Technology 7.2.2 Cast Silicon sheet 7.2.2.1 Hoxan Casting process. 7.2.2.2 Ribbon Growth on Substrate(RGS) 7.2.2.3 Direct Wafer ™ 7.2.2.4 Lift Off wafer technology 7.3 Thin film Solar Cell Technologies 7.3.1 Copper Sulphide Solar Cells 7.3.2 Amorphous Silicon 7.3.3 Amorphous Silicon Manufacturing 7.3.4 Manufacturing the amorphous silicon microcrystalline silicon tandem cell 7.3.5 Thin film crystalline silicon 7.3.6 Copper Indium Gallium Diselenide (CIGS). 7.3.6.1 CIGS Manufacturing 7.3.7 Cadmium Telluride Technology 7.3.7.1 Cadmium Telluride Commercial production. 7.4 Dye sensitised Solar Cells (DSSC) 7.5 Polymer (Organic) Solar Cells (OPV) 7.6 Perovskite (PVK)Solar Cells 7.7 Concentrator technology 7.8 Summery 7.9 References Chapter 8 Current status of crystalline silicon manufacturing and future trends 8.1 Introduction 8.2 Approaches to high efficiency silicon solar cells on p type silicon wafers. 8.2.1 Laser Grooved Buried Contact (LGBC) Solar Cells 8.2.2 Selective Emitters 8.2.3 PERL and PERC Solar Cells 8.2.4 Industrial Manufacture of PERC Cells. 8.2.5 Bifacial Module Technology 8.2.6 Light Induced Degradation 8.3 Solar cells with n type silicon 8.3.1 Silicon Heterojunction (SHJ) solar cells 8.3.2 Rear Junction Silicon Heterojunction solar cells (IBC-SHJ) 8.3.3 N type IBC cells without amorphous silicon passivation 8.4 The future of PV technology towards Terrawatts 8.4.1 III-V Tandems on Silicon 8.4.2 Silicon Tandems using perovskites 8.5 Silicon Module Reliability 8.6 Summary 8.7 References Chapter 9 The Lessons Learnt 9.1 introduction 9.2 Role of governments 9.3 Role of the Research Community 9.4 The role of manufacturing Industry in Europe and the USA 9.5 Role of China as a PV manufacturing base. 9.6 Potential for continues market growth 9.7 Future Technology Development 9.8 Final analysis 9.9 References Index
£71.06
John Wiley & Sons Inc Thin Film Solar Cells
Book SynopsisThin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist.Table of ContentsSeries Preface xiii Preface xv 1 Epitaxial Thin Film Crystalline Silicon Solar Cells on Low Cost Silicon Carriers 1Jef Poortmans 1.1 Introduction 1 1.2 Deposition Technologies 4 1.2.1 Thermally Assisted Chemical Vapor Deposition 5 1.2.2 Liquid Phase Epitaxy – Electrodeposition 6 1.2.3 Close Space Vapor Transport Technique 8 1.2.4 Ion Assisted Deposition 9 1.2.5 Low Energy Plasma Enhanced Chemical Vapor Deposition/Electron Cyclotron Resonance Chemical Vapor Deposition 10 1.3 Silicon Based Epitaxial Layer Structures for Increased Absorbance 11 1.3.1 Epitaxial Growth on Textured Substrates 11 1.3.2 Silicon–Germanium Alloys 12 1.3.3 Germanium–Silicon Structures 15 1.3.4 Epitaxial Layers on a Buried Backside Reflector 17 1.4 Epitaxial Solar Cell Results and Analysis 21 1.4.1 Laboratory Type Epitaxial Solar Cells 21 1.4.2 Industrial Epitaxial Solar Cells 22 1.4.3 Special Epitaxial Solar Cell Structures 24 1.5 High Throughput Silicon Deposition 24 1.5.1 Chemical Vapor Deposition Reactor Upscaling 25 1.5.2 Liquid Phase Epitaxy Reactor Upscaling 29 1.6 Conclusions 32 References 32 2 Crystalline Silicon Thin Film Solar Cells on Foreign Substrates by High Temperature Deposition and Recrystallization 39Stefan Reber, Thomas Kieliba, Sandra Bau 2.1 Motivation and Introduction to Solar Cell Concept 39 2.2 Substrate and Intermediate Layer 42 2.2.1 Substrate 42 2.2.2 Intermediate Layer 44 2.3 Zone Melting Recrystallization 48 2.3.1 Introduction 48 2.3.2 Zone Melting Recrystallization Film Growth 51 2.3.3 Features of Silicon Layers Recrystallized by Zone Melting Recrystallization 53 2.3.4 Development of Lamp Heated Zone Melting Recrystallization Processors 59 2.3.5 Zone Melting Recrystallization on Ceramic Substrates 64 2.4 Silicon Deposition 66 2.4.1 Requirements of Silicon Deposition for Photovoltaics 67 2.4.2 Some Basics on Thermal Silicon Atmospheric Pressure Chemical Vapor Deposition from Chlorosilanes 68 2.4.3 R&D Trends in Silicon Atmospheric Pressure Chemical Vapor Deposition for Photovoltaics 71 2.4.4 Silicon Chemical Vapor Deposition on Ceramic Substrates 73 2.5 Solar Cells on Foreign Substrates 75 2.5.1 Options for Solar Cell Fabrication 76 2.5.2 Solar Cells on Model Substrates 78 2.5.3 Solar Cells on Low Cost Substrates 82 2.6 Summary and Outlook 85 Acknowledgments 87 References 87 3 Thin Film Polycrystalline Silicon Solar Cells 97Guy Beaucarne, Abdellilah Slaoui 3.1 Introduction 97 3.1.1 Definition 97 3.1.2 Why Polycrystalline Thin Film Silicon Solar Cells? 98 3.2 Potential of Polysilicon Solar Cells 98 3.2.1 Light Confinement 98 3.2.2 Diffusion Length 99 3.2.3 Modeling 100 3.3 Substrates for Polysilicon Cells 101 3.4 Film Formation 103 3.4.1 Initial Step for Grain Size Enhancement 103 3.4.2 Techniques for Active Layer Formation 106 3.4.3 Defect Density and Activity 112 3.5 Solar Cell and Module Processing 115 3.5.1 Device Structure 115 3.5.2 Junction Formation 117 3.5.3 Defect Passivation 118 3.5.4 Isolation and Interconnection 118 3.6 Polysilicon Solar Cell Technologies 120 3.6.1 Solid Phase Crystallization Heterojunction with Intrinsic Thin Layer Solar Cells 120 3.6.2 Surface Texture and Enhanced Absorption with Back Reflector Solar Cells 121 3.6.3 Crystalline Silicon on Glass Technology 121 3.6.4 Other Research Efforts Around the World 122 3.7 Conclusion 123 References 123 4 Advances in Microcrystalline Silicon Solar Cell Technologies 133Evelyne Vallat-Sauvain, Arvind Shah and Julien Bailat 4.1 Introduction 133 4.2 Microcrystalline Silicon: Material Fabrication and Characterization 134 4.2.1 Microcrystalline Silicon Deposition Techniques 134 4.2.2 Undoped Microcrystalline Layers 137 4.2.3 Doped Layers 147 4.3 Microcrystalline Silicon Solar Cells 148 4.3.1 Light Management Issues 149 4.3.2 Single Junction Microcrystalline Silicon Solar Cells 154 4.3.3 Tandem Amorphous/Microcrystalline Silicon Solar Cells: The Micromorph Concept 159 4.4 Conclusions 163 References 165 5 Advanced Amorphous Silicon Solar Cell Technologies 173Miro Zeman 5.1 Introduction 173 5.2 Overview of Amorphous Silicon Solar Cell Technology Development and Current Issues 174 5.2.1 1970s 174 5.2.2 1980s 174 5.2.3 1990s 174 5.2.4 After 2000 175 5.2.5 Current Technology Issues 175 5.3 Hydrogenated Amorphous Silicon 177 5.3.1 Atomic Structure 177 5.3.2 Density of States 179 5.3.3 Models for the Density of States and Recombination–Generation Statistics 180 5.3.4 Optical Properties 181 5.3.5 Electrical Properties 183 5.3.6 Determination of Density of States 187 5.3.7 Metastability 190 5.3.8 Hydrogenated Amorphous Silicon from Hydrogen Diluted Silane 192 5.3.9 Doping of Hydrogenated Amorphous Silicon 194 5.3.10 Alloying of Hydrogenated Amorphous Silicon 196 5.4 Deposition of Hydrogenated Amorphous Silicon 197 5.4.1 Radio Frequency Plasma Enhanced Chemical Vapor Deposition 198 5.4.2 Direct Plasma Enhanced Chemical Vapor Deposition Techniques 200 5.4.3 Remote Plasma Enhanced Chemical Vapor Deposition Techniques 202 5.4.4 Hotwire Chemical Vapor Deposition 203 5.5 Amorphous Silicon Solar Cells 204 5.5.1 Hydrogenated Amorphous Silicon Solar Cell Structure 204 5.5.2 Hydrogenated Amorphous Silicon Solar Cell Configurations 207 5.5.3 Design Approaches for Highly Efficient Solar Cells 208 5.5.4 Light Trapping and Transparent Conductive Oxides 209 5.5.5 Degradation of Hydrogenated Amorphous Silicon Solar Cells 211 5.5.6 Multijunction Hydrogenated Amorphous Silicon Solar Cells 212 5.6 Performance and Fabrication of Hydrogenated Amorphous Silicon Based Modules 219 5.6.1 Energy Yield 221 5.6.2 Fabrication of Hydrogenated Amorphous Silicon Based Modules 223 5.6.3 Plasma enhanced Chemical Vapor Deposition Systems 223 5.7 Applications 227 5.8 Outlook 229 Acknowledgments 230 References 230 6 Chalcopyrite Based Solar Cells 237Reiner Klenk, Martha Ch. Lux-Steiner 6.1 Introduction 237 6.2 Potential of Chalcopyrite Photovoltaic Modules 237 6.3 Technology for the Preparation of Chalcopyrite Solar Cells and Modules 239 6.3.1 Absorber 240 6.3.2 Contacts 244 6.4 Characterization and Modeling 247 6.4.1 Cell Concept 248 6.4.2 Carrier Density and Transport 250 6.4.3 Loss Mechanisms 251 6.5 Scaling Up and Production 254 6.5.1 Cost Estimations 257 6.5.2 Module Performance 258 6.5.3 Sustainability 259 6.6 Developing Future Chalcopyrite Technology 260 6.6.1 Lightweight and Flexible Substrates 260 6.6.2 Cadmium Free Cells 261 6.6.3 Indium Free Absorbers 263 6.6.4 Novel Back Contacts 263 6.6.5 Bifacial Cells and Superstrate Cells 263 6.6.6 Nonvacuum Processing 264 6.6.7 Wide Gap and Tandem Cells 265 References 266 7 Cadmium Telluride Thin Film Solar Cells: Characterization, Fabrication and Modeling 277Marc Burgelman 7.1 Introduction 277 7.2 Materials and Cell Concepts for Cadmium Telluride Based Solar Cells 278 7.2.1 Optical Properties of Cadmium Telluride 279 7.2.2 Electrical Properties of Cadmium Telluride 281 7.2.3 The Buffer Material: Cadmium Sulfide 283 7.2.4 Window Materials for Cadmium Telluride Based Solar Cells 285 7.3 Research Areas and Trends in Cadmium Telluride Solar Cells 286 7.3.1 The Activation Treatment of Cadmium Telluride 286 7.3.2 The Back Contact Structure 288 7.3.3 Environmental Issues 290 7.3.4 Other Research Areas and Trends 291 7.4 Fabrication of Cadmium Telluride Cells and Modules 294 7.4.1 Deposition Methods for Cadmium Telluride Based Solar Cells 294 7.4.2 Design of Series Integrated Cadmium Telluride Modules 296 7.4.3 Production of Cadmium Telluride Solar Modules 297 7.5 Advanced Characterization and Modeling of Cadmium Telluride Solar Cells 298 7.5.1 Characterization and Modeling: Introduction 298 7.5.2 Characterization Methods for Cadmium Telluride Materials and Cells 298 7.5.3 Modeling of Thin Film Cadmium Telluride Solar Cells 303 7.6 Conclusions 314 Acknowledgments 314 References 314 8 Charge Carrier Photogeneration in Doped and Blended Organic Semiconductors 325Vladimir I. Arkhipov, Heinz Bässler 8.1 Introduction 325 8.2 Exciton Dissociation in Neat and Homogeneously Doped Random Organic Semiconductors 326 8.2.1 Intrinsic Photogeneration in Conjugated Polymers 326 8.2.2 Sensitized Photogeneration of Charge Carriers in Homogenously Doped Conjugated Polymers 328 8.2.3 Photogeneration of Charge Carriers at a Donor–Acceptor Interface 335 8.3 Models of Exciton Dissociation in Homogeneously Doped Conjugated Polymers and in Polymer Based Donor/Acceptor Blends 349 8.3.1 The Onsager–Braun Model 349 8.3.2 Exciton Dissociation in Conjugated Polymers Homogeneously Doped with Electron Scavengers 351 8.3.3 Exciton Dissociation at a Polymer Donor/Acceptor Interface 353 8.4 Conclusions 357 References 358 9 Nanocrystalline Injection Solar Cells 363Michael Grätzel 9.1 Introduction 363 9.2 Band Diagram and Operational Principle of the Dye Sensitized Solar Cell 364 9.3 The Importance of the Nanostructure 365 9.3.1 Light Harvesting by a Sensitizer Monolayer Adsorbed on a Mesoscopic Semiconductor Film 366 9.3.2 Enhanced Red and Near Infrared Response by Light Containment 368 9.3.3 Light Induced Charge Separation and Conversion of Photons to Electric Current 369 9.3.4 Charge Carrier Collection 371 9.3.5 Quantum Dot Sensitizers 374 9.4 Photovoltaic Performance of the Dye Sensitized Solar Cell 375 9.4.1 Photocurrent Action Spectra 375 9.4.2 Overall Conversion Efficiency Under Global AM1.5 Standard Reporting Conditions 376 9.4.3 Increasing the Open Circuit Photovoltage 377 9.5 Development of New Sensitizers and Redox Systems 378 9.6 Solid State Dye Sensitized Solar Cells 379 9.7 Dye Sensitized Solar Cell Stability 379 9.7.1 Criteria for Long Term Stability of the Dye 379 9.7.2 Kinetic Measurements 380 9.7.3 Recent Experimental Results on Dye Sensitized Solar Cell Stability 381 9.7.4 First Large Scale Field Tests and Commercial Developments 382 9.8 Future Prospects 384 Acknowledgments 384 References 384 10 Charge Transport and Recombination in Donor–Acceptor Bulk Heterojunction Solar Cells 387A. J. Mozer, N. S. Sariciftci 10.1 Introduction 387 10.2 Development of Bulk Heterojunction Solar Cells 388 10.3 Bulk Heterojunction Solar Cells 391 10.3.1 Operational Principles 391 10.3.2 Nanomorphology–Property Relations 394 10.3.3 Improving the Photon Harvesting 397 10.4 Charge Carrier Mobility and Recombination 399 10.4.1 Measurement Techniques 399 10.4.2 Charge Transport in Conjugated Polymers 401 10.4.3 Charge Transport and Recombination in Bulk Heterojunction Solar Cells 412 10.5 Summary 421 Acknowledgments 421 References 422 11 The Terawatt Challenge for Thin Film Photovoltaics 427Ken Zweibel 11.1 Prologue 427 11.2 ‘The Only Big Number Out There – 125 000 TW’ (Quote, Nate Lewis, 2004) 428 11.3 Low Cost and the Idea of Thin Films 431 11.4 A Bottom Up Analysis of Thin Film Module Costs 431 11.4.1 Approach 432 11.4.2 Results 435 11.5 Other Aspects of the ‘Terawatt Challenge’ 455 11.6 Risks and Perspective 458 Acknowledgments 459 Appendix 11.1 459 Appendix 11.2 460 References 460 Index 463
£162.85
John Wiley & Sons Inc Photovoltaics
Book SynopsisA comprehensive tutorial on photovoltaic technology now fully updated to include solar storage and the latest methods for on-site plant measurements Starting with the basic principles of solar energy, this fully updated, practical text explains the fundamentals of semiconductor physics and the structure and functioning of the solar cell. It describes the latest measurement techniques for solar modules, and the planning and operation of grid-connected and off-grid PV systems. It also looks at other thin film cells, hybrid wafer cells, and concentrator systems. Additionally, this Second Edition covers solar modules and solar generators; system technology of grid connected plants; the storage of solar energy; photovoltaic measurement technology; the planning and operation of grid-connected systems; economic efficiency of PV systems; and the future development of PV. Presents the latest advances in PV R&D and industry deployment UpdatedTable of Contents Preface to the First International Edition xv Preface to the Second International Edition xvii Abbreviations xix 1 Introduction 1 1.1 Introduction 1 1.1.1 Why Photovoltaics? 1 1.1.2 Who Should Read This Book? 2 1.1.3 Structure of the Book 2 1.2 What Is Energy? 3 1.2.1 Definition of Energy 3 1.2.2 Units of Energy 4 1.2.3 Primary, Secondary, and End Energy 5 1.2.4 Energy Content of Various Substances 6 1.3 Problems with Today’s Energy Supply 7 1.3.1 Growing Energy Requirements 7 1.3.2 Tightening of Resources 8 1.3.3 Climate Change 9 1.3.4 Hazards and Disposal 11 1.4 Renewable Energies 11 1.4.1 The Family of Renewable Energies 11 1.4.2 Advantages and Disadvantages of Renewable Energies 12 1.4.3 Previous Development of Renewable Energies 13 1.5 Photovoltaics – The Most Important in Brief 13 1.5.1 What Does “Photovoltaics” Mean? 13 1.5.2 What Are Solar Cells and Solar Modules? 14 1.5.3 How Is a Typical Photovoltaic Plant Structured? 14 1.5.4 What Does a Photovoltaic Plant “Bring?” 15 1.6 History of Photovoltaics 16 1.6.1 How It all Began 16 1.6.2 The First Real Solar Cells 17 1.6.3 From Space to Earth 19 1.6.4 From Toy to Energy Source 20 2 Solar Radiation 23 2.1 Properties of Solar Radiation 23 2.1.1 Solar Constant 23 2.1.2 Spectrum of the Sun 23 2.1.3 Air Mass 25 2.2 Global Radiation 25 2.2.1 Origin of Global Radiation 25 2.2.2 Contributions of Diffuse and Direct Radiation 26 2.2.3 Global Radiation Maps 28 2.3 Calculation of the Position of the Sun 30 2.3.1 Declination of the Sun 30 2.3.2 Calculating the Path of the Sun 32 2.4 Radiation on Tilted Surfaces 35 2.4.1 Radiation Calculation with the Three-component Model 35 2.4.1.1 Direct Radiation 35 2.4.1.2 Diffuse Radiation 36 2.4.1.3 Reflected Radiation 37 2.4.2 Radiation Estimates with Diagrams and Tables 38 2.4.3 Yield Gain through Tracking 41 2.5 Radiation Availability and World Energy Consumption 41 2.5.1 The Solar Radiation Energy Cube 41 2.5.2 The Sahara Miracle 45 3 Fundamentals of Semiconductor Physics 47 3.1 Structure of a Semiconductor 47 3.1.1 Bohr’s Atomic Model 47 3.1.2 Periodic Table of Elements 49 3.1.3 Structure of the Silicon Crystal 49 3.1.4 Compound Semiconductors 49 3.2 Band Model of a Semiconductor 51 3.2.1 Origin of Energy Bands 51 3.2.2 Differences in Isolators, Semiconductors, and Conductors 53 3.2.3 Intrinsic Carrier Concentration 53 3.3 Charge Transport in Semiconductors 55 3.3.1 Field Currents 55 3.3.2 Diffusion Currents 56 3.4 Doping of Semiconductors 57 3.4.1 n-Doping 57 3.4.2 p-Doping 58 3.5 The p–n Junction 59 3.5.1 Principle of Method of Operation 59 3.5.2 Band Diagram of the p–n Junction 61 3.5.3 Behavior with Applied Voltage 62 3.5.4 Diode Characteristics 63 3.6 Interaction of Light and Semiconductors 64 3.6.1 Phenomenon of Light Absorption 64 3.6.1.1 Absorption Coefficient 65 3.6.1.2 Direct and Indirect Semiconductors 65 3.6.2 Light Reflection on Surfaces 67 3.6.2.1 Reflection Factor 67 3.6.2.2 Antireflection Coating 69 4 Structure and Method of Operation of Solar Cells 71 4.1 Consideration of the Photodiode 71 4.1.1 Structure and Characteristics 71 4.1.2 Equivalent Circuit 73 4.2 Method of Function of the Solar Cell 73 4.2.1 Principle of the Structure 73 4.2.2 Recombination and Diffusion Length 74 4.2.3 What Happens in the Individual Cell Regions? 75 4.2.3.1 Absorption in the Emitter 75 4.2.3.2 Absorption in the Space Charge Region 76 4.2.3.3 Absorption Within the Diffusion Length of the Electrons 76 4.2.3.4 Absorption Outside the Diffusion Length of the Electrons 76 4.2.4 Back-surface Field 77 4.3 Photocurrent 77 4.3.1 Absorption Efficiency 78 4.3.2 Quantum Efficiency 79 4.3.3 Spectral Sensitivity 79 4.4 Characteristic Curve and Characteristic Parameters 80 4.4.1 Short-circuit Current ISC 81 4.4.2 Open-circuit Voltage V OC 82 4.4.3 Maximum Power Point (MPP) 82 4.4.4 Fill Factor (FF) 82 4.4.5 Efficiency 𝜂 83 4.4.6 Temperature Dependence of Solar Cells 83 4.5 Electrical Description of Real Solar Cells 85 4.5.1 Simplified Model 85 4.5.2 Standard Model (Single-diode Model) 86 4.5.3 Two-diode Model 86 4.5.4 Determining the Parameters of the Equivalent Circuit 88 4.6 Considering Efficiency 90 4.6.1 Spectral Efficiency 91 4.6.2 Theoretical Efficiency 94 4.6.3 Losses in Real Solar Cells 96 4.6.3.1 Optical Losses, Reflection on the Surface 96 4.6.3.2 Electrical Losses and Ohmic Losses 98 4.7 High-efficiency Cells 99 4.7.1 Buried-contact Cell 99 4.7.2 Point-contact Cell (IBC Cell) 99 4.7.3 PERL and PERC Cell 101 5 Cell Technologies 103 5.1 Production of Crystalline Silicon Cells 103 5.1.1 From Sand to Silicon 103 5.1.1.1 Production of Polysilicon 103 5.1.1.2 Production of Monocrystalline Silicon 105 5.1.1.3 Production of Multicrystalline Silicon 106 5.1.2 From Silicon to Wafer 107 5.1.2.1 Wafer Production 107 5.1.2.2 Wafers from Ribbon Silicon 107 5.1.3 Production of Standard Solar Cells 108 5.1.4 Production of Solar Modules 111 5.2 Cells of Amorphous Silicon 112 5.2.1 Properties of Amorphous Silicon 112 5.2.2 Production Process 113 5.2.3 Structure of the Pin Cell 113 5.2.4 Staebler–Wronski Effect 115 5.2.5 Stacked Cells 116 5.2.6 Combined Cells of Micromorphous Material 118 5.2.7 Integrated Series Connection 119 5.3 Further Thin Film Cells 120 5.3.1 Cells of Cadmium-Telluride 120 5.3.2 CIS Cells 121 5.4 Hybrid Wafer Cells 123 5.4.1 Combination of c-Si and a-Si (HIT Cell) 123 5.4.2 Stacked Cells of III/V Semiconductors 124 5.5 Other Cell Concepts 125 5.6 Concentrator Systems 126 5.6.1 Principle of Radiation Bundling 126 5.6.2 What Is the Advantage of Concentration? 127 5.6.3 Examples of Concentrator Systems 128 5.6.4 Advantages and Disadvantages of Concentrator Systems 128 5.7 Ecological Questions on Cell and Module Production 129 5.7.1 Environmental Effects of Production and Operation 129 5.7.1.1 Example of Cadmium-Telluride 129 5.7.1.2 Example of Silicon 129 5.7.2 Availability of Materials 130 5.7.2.1 Silicon 130 5.7.2.2 Cadmium-Telluride 131 5.7.2.3 Cadmium Indium Selenide 131 5.7.2.4 III/V Semiconductors 132 5.7.3 Energy Amortization Time and Yield Factor 132 5.8 Summary 135 6 Solar Modules and Solar Generators 139 6.1 Properties of Solar Modules 139 6.1.1 Solar Cell Characteristic Curve in All Four Quadrants 139 6.1.2 Parallel Connection of Cells 139 6.1.3 Series Connection of Cells 141 6.1.4 Use of Bypass Diodes 142 6.1.4.1 Reducing Shading Losses 142 6.1.4.2 Prevention of Hotspots 144 6.1.5 Typical Characteristic Curves of Solar Modules 147 6.1.5.1 Variation of the Irradiance 147 6.1.5.2 Temperature Behavior 147 6.1.6 Special Case Thin-film Modules 149 6.1.7 Examples of Data Sheet Information 150 6.2 Connecting Solar Modules 150 6.2.1 Parallel Connection of Strings 150 6.2.2 What Happens in Case of Cabling Errors? 152 6.2.3 Losses Due to Mismatching 153 6.2.4 Smart Installation in Case of Shading 153 6.3 Direct Current Components 156 6.3.1 Principle of Plant Construction 156 6.3.2 Direct Current Cabling 156 6.4 Types of Plants 158 6.4.1 Ground-mounted Plants 158 6.4.2 Flat-roof Plants 161 6.4.3 Pitched-roof Systems 162 6.4.4 Facade Systems 164 7 System Technology of Grid-connected Plants 165 7.1 Solar Generator and Load 165 7.1.1 Resistive Load 165 7.1.2 DC/DC Converter 166 7.1.2.1 Idea 166 7.1.2.2 Buck Converter 166 7.1.2.3 Boost Converter 169 7.1.3 MPP Tracker 171 7.2 Construction of Grid-connected Systems 172 7.2.1 Feed-in Variations 172 7.2.2 Plant Concepts 173 7.3 Construction of Inverters 174 7.3.1 Tasks of the Inverter 175 7.3.2 Line-commutated and Self-commutated Inverter 175 7.3.3 Inverters Without Transformers 175 7.3.4 Inverters with Mains Transformer 177 7.3.5 Inverters with HF Transformer 178 7.3.6 Three-phase Feed-in 179 7.3.7 Further Clever Concepts 180 7.4 Efficiency of Inverters 181 7.4.1 Conversion Efficiency 181 7.4.2 European Efficiency 184 7.4.3 Clever MPP Tracking 185 7.5 Dimensioning of Inverters 186 7.5.1 Power Dimensioning 186 7.5.2 Voltage Dimensioning 187 7.5.3 Current Dimensioning 188 7.6 Requirements of the Grid Operators 188 7.6.1 Prevention of Stand-Alone Operation 188 7.6.2 Maximum Feed-in Power 190 7.6.3 Reactive Power Provision 191 7.7 Safety Aspects 194 7.7.1 Earthing of the Generator and Lightning Protection 194 7.7.2 Fire Protection 194 8 Storage of Solar Energy 197 8.1 Principle of Solar Storage 197 8.2 Batteries 198 8.2.1 Lead-acid Battery 199 8.2.1.1 Principle and Build-up 199 8.2.1.2 Types of Lead Batteries 201 8.2.1.3 Battery Capacity 203 8.2.1.4 Voltage Progression 203 8.2.1.5 Summary 204 8.2.2 Charge Controllers 204 8.2.2.1 Series Controller 204 8.2.2.2 Shunt Controller 205 8.2.2.3 MPP Controller 205 8.2.2.4 Examples of Products 206 8.2.3 Lithium Ion Battery 206 8.2.3.1 Principle and Build-up 207 8.2.3.2 Reactions During Charging and Discharging 208 8.2.3.3 Material Combinations and Cell Voltage 209 8.2.3.4 Safety Aspects 210 8.2.3.5 Charging Procedures 211 8.2.3.6 Battery Design 211 8.2.3.7 Lifespan 212 8.2.3.8 Application Areas 213 8.2.3.9 Summary 213 8.2.4 Sodium Sulfur Battery 213 8.2.4.1 Principle and Build-up 213 8.2.4.2 Peculiarities of the High Temperature Battery 214 8.2.4.3 Sodium Sulfur Batteries in Practice 215 8.2.4.4 Summary 216 8.2.5 Redox Flow Battery 216 8.2.5.1 Principle and Build-up 216 8.2.5.2 Behavior in Practice 218 8.2.5.3 Concrete Applications 219 8.2.5.4 Summary 220 8.2.6 Comparison of the Different Battery Types 220 8.3 Storage Use for Increase of Self-consumption 220 8.3.1 Self-consumption in Domestic Households 221 8.3.1.1 Solution Without Storage 222 8.3.1.2 Solution with Storage 223 8.3.1.3 Examples of Storage Systems 223 8.3.1.4 How Much Cost a Kilowatt-Hour? 225 8.3.1.5 The Smart Home 226 8.3.2 Self-consumption in Commercial Enterprises 227 8.3.2.1 Example Production Factory 227 8.3.2.2 Example Hospital 227 8.4 Storage Deployment from the Point of View of the Grid 228 8.4.1 Peak-shaving with Storages 229 8.4.2 Governmental Funding Program for Solar Storages 229 8.5 Stand-alone Systems 232 8.5.1 Principal Structure 232 8.5.2 Examples of Stand-alone Systems 232 8.5.2.1 Solar Home Systems 232 8.5.2.2 Hybrid Systems 234 8.5.3 Dimensioning Stand-alone Plants 235 8.5.3.1 Acquiring the Energy Consumption 235 8.5.3.2 Dimensioning the PV Generator 236 8.5.3.3 Selecting the Battery 238 9 Photovoltaic Metrology 241 9.1 Measurement of Solar Radiation 241 9.1.1 Global Radiation Sensors 241 9.1.1.1 Pyranometer 241 9.1.1.2 Radiation Sensors from Solar Cells 243 9.1.2 Measuring Direct and Diffuse Radiation 244 9.2 Measuring the Power of Solar Modules 245 9.2.1 Build-up of a Solar Module Power Test Rig 245 9.2.2 Quality Classification of Module Flashers 246 9.2.3 Determination of the Module Parameters 247 9.3 Peak Power Measurement at Site 248 9.3.1 Principle of Peak Power Measurement 248 9.3.2 Possibilities and Limits of the Measurement Principle 248 9.4 Thermographic Measuring Technology 249 9.4.1 Principle of Infrared Temperature Measurement 250 9.4.2 Bright Thermography of Solar Modules 251 9.4.3 Dark Thermography 254 9.5 Electroluminescence Measuring Technology 254 9.5.1 Principle of Measurement 254 9.5.2 Examples of Photos 255 9.5.3 Low-cost Outdoor Electroluminescence Measurements 257 9.6 Analysis of Potential Induced Degradation (PID) 259 9.6.1 Explanation of the PID Effect 260 9.6.2 Test of Modules for PID 262 9.6.3 EL Investigations to PID 263 10 Design and Operation of Grid-connected Plants 265 10.1 Planning and Dimensioning 265 10.1.1 Selection of Site 265 10.1.2 Shading 265 10.1.2.1 Shading Analysis 266 10.1.2.2 Near Shading 266 10.1.2.3 Self-shading 268 10.1.2.4 Optimized String Connection 269 10.1.3 Plant Dimensioning and Simulation Programs 270 10.1.3.1 Inverter Design Tools 270 10.1.3.2 Simulation Programs for Photovoltaic Plants 270 10.2 Economics of Photovoltaic Plants 272 10.2.1 The Renewable Energy Law 273 10.2.2 Return Calculation 273 10.2.2.1 Input Parameters 273 10.2.2.2 Amortization Time 274 10.2.2.3 Property Return 274 10.2.2.4 Profit Increase Through Self-consumption of Solar Power 276 10.2.2.5 Further Influences 276 10.3 Surveillance, Monitoring, and Visualization 277 10.3.1 Methods of Plant Surveillance 277 10.3.2 Monitoring PV Plants 278 10.3.2.1 Specific Yields 278 10.3.2.2 Losses 279 10.3.2.3 Performance Ratio 279 10.3.2.4 Concrete Measures for Monitoring 280 10.3.3 Visualization 280 10.4 Operating Results of Actual Installations 281 10.4.1 Pitched Roof Installation from 1996 281 10.4.2 Pitched Roof Installation from 2002 282 10.4.3 Flat Roof from 2008 283 11 Future Development 285 11.1 Potential of Photovoltaics 285 11.1.1 Theoretical Potential 285 11.1.2 Technically Useful Radiation Energy 285 11.1.2.1 Roofs 286 11.1.2.2 Facades 286 11.1.2.3 Traffic Routes 287 11.1.2.4 Free Areas 287 11.1.3 Technical Electrical Energy Generation Potential 287 11.1.4 Photovoltaics versus Biomass 288 11.2 Efficient Promotion Instruments 289 11.3 Price and Feed-in Tariff Development 290 11.3.1 Price Development of Solar Modules 290 11.3.2 Development of Feed-in Tariffs 292 11.4 Renewable Energies in Today’s Power Supply System 292 11.4.1 Structure of Electricity Generation 293 11.4.2 Types of Power Plants and Control Energy 293 11.4.3 Interplay Between Sun and Wind 294 11.4.4 Exemplary Electricity Generation Courses 295 11.5 Thoughts on Future Energy Supply 298 11.5.1 Consideration of Different Future Scenarios 298 11.5.2 Options to Store Electrical Energy 301 11.5.2.1 Pumped Storage Power Plants 301 11.5.2.2 Compressed Air Storage 301 11.5.2.3 Battery Storage 302 11.5.2.4 Electric Mobility 302 11.5.2.5 Hydrogen as Storage 302 11.5.2.6 Power to Gas: Methanation 303 11.5.3 Alternatives to Storage 304 11.5.3.1 Active Load Management by Smart Grids 304 11.5.3.2 Expansion of the Electricity Grids 304 11.5.3.3 Limitation of the Feed-in Power 304 11.5.3.4 Use of Flexible Power Plants 304 11.6 Conclusion 305 12 Exercises 307 A Solar Radiation Diagrams 317 B Checklist for Planning, Installing, and Operating a Photovoltaic Plant 327 C Physical Constants/Material Parameters 329 References 331 Further Information on Photovoltaics 339 Index 341
£67.46
Springer International Publishing AG Building-Integrated Photovoltaic Systems (BIPVS): Performance and Modeling Under Outdoor Conditions
Book SynopsisThis book discusses building-integrated photovoltaic systems (BIPV) and provides solutions for solving problems related to designing, sizing and monitoring a BIPV that has been used to replace conventional building materials in parts of the building envelope such as the roof, skylights or facades. The book begins by introducing the basics to readers interested in learning about this technology and then outlines in an accessible way, a practical development plan for the installation and monitoring of these systems in residential, industrial, and commercial buildings. Chapters discuss the needs of installing, designing, and sizing and provide a financial analysis for a successful implementation of a BIPV system. This book is a useful tool for renewable energy designers, energy contractors, architects, government institutions, and those in the academic community who are interested in seamlessly integrating solar panels into the construction phase of new building projects or retrofitted into existing buildings.Table of ContentsChapter 1. Energy's current state.- Chapter 2.Conceptual Framework.- Chapter 3.BIPVS basics for design, sizing, monitoring and Power quality measurement and assessment.- Chapter 4.Integrated photovoltaic system sizing and economic evaluation using RETScreen™ for a building of 40 apartments.- Chapter 5. BIPVS sizing and Implementation at the Universidad de Bogota Jorge Tadeo Lozano.- Chapter 6.Method for Calculating Quantum Efficiency and Spectral Response of Solar Cells Using LabVIEW.- Chapter 7. PV generator Characterization.- Chapter 8.Implementation of the BIPVS monitoring system.- Chapter 9.Performance - Behavior and Analysis of BIPVS.- Chapter 10.Behavior and analysis of the power system in steady state.- Chapter 11.Application of neural networks to validate the power generation of BIPVS.- Chapter 12.Study and analysis of BIPVS with RETScreen.
£80.99
Taylor & Francis Ltd Organic Photovoltaics Mechanisms Materials and Devices Optical Science and Engineering
Book SynopsisRecently developed organic photovoltaics (OPVs) show distinct advantages over their inorganic counterparts due to their lighter weight, flexible shape, versatile materials synthesis and device fabrication schemes, and low cost in large-scale industrial production. Although many books currently exist on general concepts of PV and inorganic PV materials and devices, few are available that offer a comprehensive overview of recently fast developing organic and polymeric PV materials and devices. Organic Photovoltaics: Mechanisms, Materials, and Devices fills this gap. The book provides an international perspective on the latest research in this rapidly expanding field with contributions from top experts around the world. It presents a unified approach comprising three sections: General Overviews; Mechanisms and Modeling; and Materials and Devices. Discussions include sunlight capture, exciton diffusion and dissociation, interface properties, charge recombination and migrationTable of ContentsForeword 1. Foreword 2. Preface. Acknowledgements. Editors. Contributors. General Overviews. Mechanisms and Modeling. Materials and Devices.
£58.99
Taylor & Francis Solar Photovoltaic Basics
Book SynopsisThis book explains the science of photovoltaics (PV) in a way that most people can understand, using the curriculum that reflects the core modules of the North American Board of Certified Energy Practitioners (NABCEP) Associate Exam. Whether or not you are taking the NABCEP Associate Exam, learning the material covered in this book is the best investment you can make in ensuring your place and moving up in the solar industry.Providing complete coverage of the NABCEP syllabus in easily accessible chapters, this book addresses all of the core objectives required to pass the exam, including the ten main skill sets:â PV markets and applicationsâ Safety basicsâ Electricity basicsâ Solar energy fundamentalsâ PV module fundamentalsâ System componentsâ PV system sizing principlesâ PV system electrical designâ PV system mechanical designâ Performance analysis, maintenance and troubleshootingYou will learn the importance of surveying a site, how to carry out a survey and how to use the tools that determine shading and annual production, as well as the necessity of safety on site. This guide also includes technical math and equations that are suitable and understandable to those without engineering degrees but are necessary in understanding the principles of solar PV.This new edition of Sean Whiteâs highly successful study guide has been updated throughout and reflects recent changes in the industry.
£38.36
Taylor & Francis Ltd Applied Photovoltaics
Book SynopsisThe new edition of this thoroughly considered textbook provides a reliable, accessible and comprehensive guide for students of photovoltaic applications and renewable energy engineering. Written by a group of award-winning authors it is brimming with information and is carefully designed to meet the needs of its readers. Along with exercises and references at the end of each chapter, it features a set of detailed technical appendices that provide essential equations, data sources and standards. The new edition has been fully updated with the latest information on photovoltaic cells, modules, applications and policy. Starting from basics with 'The Characteristics of Sunlight' the reader is guided step-by-step through semiconductors and p-n junctions; the behaviour of solar cells; cell properties and design; and PV cell interconnection and module fabrication. The book covers stand-alone photovoltaic systems; specific purpose photovoltaic systems; remote area power supply systems; grid-connected photovoltaic systems and water pumping. Applied Photovoltaics is highly illustrated and very accessible, providing the reader with all the information needed to start working with photovoltaics. Trade ReviewPraise for previous editions"Recommended reading for any course which deals with hands-on aspects of photovoltaic systems and applications. Earthscan should be applauded" – Tom Markvart, University of Southampton, UK"An excellent introduction to the science, principles and practice of photovoltaic energy conversion." – Jenny Nelson, Professor of Physics, Imperial College, London, UK "The leading research, teaching and engineering group has made another important contribution to photovoltaic education." – Allen Barnett, Senior Policy Fellow, Center for Energy and Environmental Policy, University of Delaware, USA. "This book will make an excellent reference for engineers and scientists involved in photovoltaics. The breadth of knowledge contained within and the detailed equations to support it, as well as being an easy reading style will enable people to get to the understanding of why PV systems are put together the way they are - well beyond rules of thumb." – Mike Dymond, Sowilo Engineering Pty Ltd for Solar Progress Table of ContentsIntroduction 1. The Characteristics of Sunlight 2. Semiconductors and P-N Junctions 3. The Behaviour of Solar Cells 4. Cell Properties and Design 5. PV Cell Interconnection and Module Fabrication 6. Stand-alone Photovoltaic System Components 7. Desisigning Stand-alone Photovoltaic Systems 8. Specific Purpose Photovoltaic Applications 9. Remote Area Power Supply Systems 10. Grid Connected Photovoltaic Systems 11. Photovoltaic Water Pumping. Index
£48.99
John Wiley & Sons Inc Photovoltaic Solar Energy From Fundamentals to
Book SynopsisSolar PV is now the third most important renewable energy source, after hydro and wind power, in terms of global installed capacity.Table of ContentsList of Contributors xxvii Foreword xxxii Acknowledgments xxxiv About the Companion Website xxxv Part One INTRODUCTION TO PHOTOVOLTAICS 1 1.1 Introduction 3 Angèle Reinders, Wilfried van Sark, and Pierre Verlinden List of Symbols 11 Constants 11 List of Acronyms 11 References 11 Part Two BASIC FUNCTIONAL PRINCIPLES OF PHOTOVOLTAICS 13 2.1 Semiconductor Materials and their Properties 15 Angèle Reinders List of Symbols 19 List of Acronyms 19 References 20 2.2 Doping, Diffusion, and Defects in Solar Cells 21 Pierre J. Verlinden List of Symbols 31 List of Acronyms 31 References 31 2.3 Absorption and Generation 32 Seth Hubbard References 38 2.4 Recombination 39 Seth Hubbard References 46 2.5 Carrier Transport 47 Seth Hubbard References 53 2.6 PN Junctions and the Diode Equation 54 Seth Hubbard Acknowledgments 63 List of Symbols 63 List of Acronyms 65 References 66 Part Three CRYSTALLINE SILICON TECHNOLOGIES 67 3.1 Silicon Materials: Electrical and Optical Properties 69 Andreas Fell List of Symbols 77 List of Acronyms 77 References 78 3.2 Silicon Solar Cell Device Structures 80 Andrew Blakers and Ngwe Zin References 90 3.3 Interdigitated Back Contact Solar Cells 92 Pierre Verlinden 3.4 Heterojunction Silicon Solar Cells 104 Wilfried van Sark List of Symbols 110 List of Acronyms 111 References 112 3.5 Surface Passivation and Emitter Recombination Parameters 114 Bram Hoex List of Symbols 121 List of Acronyms 122 References 122 3.6 Passivated Contacts 125 Martin Hermle List of Symbols 133 List of Acronyms 133 References 134 3.7 Light Management in Silicon Solar Cells 136 Zachary Holman and Mathieu Boccard List of Symbols 147 List of Acronyms 148 References 149 3.8 Numerical Simulation of Crystalline Silicon Solar Cells 150 Pietro Altermatt References 158 3.9 Advanced Concepts 160 Martin Green List of Acronyms 166 References 166 Part Four CHALCOGENIDE THIN FILM SOLAR CELLS 167 4.1 Basics of Chalcogenide Thin Film Solar Cells 169 Susanne Siebentritt List of Symbols 176 List of Acronyms 176 References 176 4.2 Cu(In,Ga)Se2 and CdTe Absorber Materials and their Properties 179 Sylvain Marsillac List of Symbols 187 List of Acronyms 187 References 188 4.3 Contacts, Buffers, Substrates, and Interfaces 190 Negar Naghavi List of Acronyms 200 References 200 4.4 CIGS Module Design and Manufacturing 204 William Shafarman List of Acronyms 211 References 211 Part Five THIN FILM SILICON‐BASED PV TECHNOLOGIES 213 5.1 Amorphous and Nanocrystalline Silicon Solar Cells 215 Etienne Moulin, Jan‐Willem Schüttauf, and Christophe Ballif List of Symbols 223 References 224 5.2 Thin Crystalline Silicon Solar Cells on Glass 226 Onno Gabriel, Daniel Amkreutz, Jan Haschke, Bernd Rech, and Rutger Schlatmann Acknowledgments 235 List of Symbols and Acronyms 235 References 236 5.3 Light Management in Crystalline and Thin Film Silicon Solar Cells 238 Franz Haug List of Symbols 244 List of Acronyms 245 References 245 5.4 New Future Concepts 248 Jan‐Willem Schüttauf, Etienne Moulin, and Christophe Ballif List of Symbols 253 References 253 Part Six ORGANIC PHOTOVOLTAICS 255 6.1 Solid‐State Organic Photovoltaics 257 Bernard Kippelen Acknowledgments 265 Acronyms 265 References 265 6.2 Hybrid and Dye‐Sensitized Solar Cells 267 Woojun Yoon References 275 6.3 Perovskite Solar Cells 277 Samuel D. Stranks and Henry J. Snaith References 289 6.4 Organic PV Module Design and Manufacturing 292 Veronique S. Gevaerts List of Acronyms 301 References 302 Part Seven CHARACTERIZATION AND MEASUREMENTS METHODS 303 7.1 Methods and Instruments for the Characterization of Solar Cells 305 Halden Field List of Symbols 320 List of Acronyms 320 References 320 7.2 Photoluminescence and Electroluminescence Characterization in Silicon Photovoltaics 322 Thorsten Trupke Acknowledgments 334 List of Symbols 334 List of Acronyms 335 References 335 7.3 Measurement of Carrier Lifetime, Surface Recombination Velocity , and Emitter Recombination Parameters 339 Henner Kampwerth List of Symbols 347 List of Acronyms 348 References 348 7.4 In‐situ Measurements, Process Control, and Defect Monitoring 350 Angus Rockett List of Acronyms 360 References 360 7.5 PV Module Performance Testing and Standards 362 Geoffrey S. Kinsey List of Symbols 368 List of Acronyms 368 References 369 Part Eight III‐Vs AND PV CONCENTRATOR TECHNOLOGIES 371 8.1 III‐V Solar Cells – Materials, Multi‐Junction Cells – Cell Design and Performance 373 Frank Dimroth Acknowledgments 380 List of Acronyms 380 References 380 8.2 New and Future III‐V Cells and Concepts 383 Simon Fafard List of Acronyms and Symbols 393 References 393 8.3 High Concentration PV Systems 396 Karin Hinzer, Christopher E. Valdivia, and John P.D. Cook List of Acronyms 408 References 409 8.4 Operation of CPV Power Plants: Energy Prediction 411 Geoffrey S. Kinsey List of Acronyms 418 References 418 8.5 The Luminescent Solar Concentrator (LSC) 420 Michael Debije List of Symbols 428 List of Acronyms 428 References 429 Part Nine SPACE TECHNOLOGIES 431 9.1 Materials, Cell Structures, and Radiation Effects 433 Rob Walters List of Symbols and Units 442 References 442 9.2 Space PV Systems and Flight Demonstrations 444 Phillip Jenkins Acknowledgments 453 List of Acronyms 453 References 454 9.3 A Vision on Future Developments in Space Photovoltaics 455 David Wilt List of Symbols 461 List of Acronyms 461 References 462 Part Ten PV MODULES AND MANUFACTURING 463 10.1 Manufacturing of Various PV Technologies 465 Alison Lennon and Rhett Evans Acknowledgements 474 List of Abbreviations 474 References 474 10.2 Encapsulant Materials for PV Modules 478 Michael Kempe Acknowledgments 488 List of Symbols 488 List of Acronyms 488 References 489 10.3 Reliability and Durability of PV Modules 491 Sarah Kurtz Acknowledgments 500 References 501 10.4 Advanced Module Concepts 502 Pierre Verlinden List of Symbols 508 List of Acronyms 508 References 509 Part Eleven PV SYSTEMS AND APPLICATIONS 511 11.1 Grid-Connected PV Systems 513 Greg J. Ball Acknowledgments 527 List of Acronyms 528 References 529 11.2 Inverters, Power Optimizers, and Microinverters 530 Chris Deline List of Symbols 537 List of Acronyms 537 References 538 11.3 Stand-Alone and Hybrid PV Systems 539 Matthias Vetter and Georg Bopp References 552 11.4 PV System Monitoring and Characterization 553 Wilfried van Sark, Atse Louwen, Odysseas Tsafarakis, and Panos Moraitis Acknowledgments 561 List of Symbols 561 List of Acronyms 562 References 562 11.5 Energy Prediction and System Modeling 564 Joshua S. Stein List of Symbols and Acronyms 575 References 577 11.6 Building Integrated Photovoltaics 579 Michiel Ritzen, Zeger Vroon, and Chris Geurts List of Acronyms 588 References 588 11.7 Product Integrated Photovoltaics 590 Angèle Reinders and Georgia Apostolou List of Acronym 598 References 598 Part Twelve PV DEPLOYMENT IN DISTRIBUTION GRIDS 601 12.1 PV Systems in Smart Energy Homes: PowerMatching City 603 Albert van den Noort List of Acronyms 610 References 611 12.2 New Future Solutions: Best Practices from European PV Smart Grid Projects 612 Gianluca Fulli and Flavia Gangale List of Acronyms 619 References 619 Part Thirteen SUPPORTING METHODS AND TOOLS 621 13.1 The Economics of PV Systems 623 Matthew Campbell List of Acronyms 633 References 633 13.2 People’s Involvement in Residential PV and their Experiences 634 Barbara van Mierlo References 644 13.3 Life Cycle Assessment of Photovoltaics 646 Vasilis Fthenakis References 656 13.4 List of International Standards Related to PV 658 Pierre Verlinden and Wilfried van Sark Acknowledgements 671 References 671 Index 672
£111.82
John Wiley & Sons Inc Photovoltaic Sources Modeling
Book SynopsisA practical reference to support choosing, customising and handling the best PV simulation solution This comprehensive guide surveys all available models for simulating a photovoltaic (PV) generator at different levels of granularity, from cell to system level, in uniform as well as in mismatched conditions.Table of ContentsAcknowledgements xi Introduction xiii Tables of Symbols and Acronyms xv 1 PV Models 1 1.1 Introduction 1 1.2 Modeling: Granularity and Accuracy 1 1.3 The Double-diode Model 2 1.4 The Single-diode Model 4 1.4.1 Effect of the SDM Parameters on the I–V Curve 5 1.5 Models of PV Array for Circuit Simulator 6 1.5.1 The Single-diode Model based on the Lambert W-function 10 1.6 PV Dynamic Models 11 1.7 PV Small-signal Models and Dynamic-resistance Modelling 14 References 17 2 Single-diode Model Parameter Identification 21 2.1 Introduction 21 2.2 PV Parameter Identification from Datasheet Information 21 2.2.1 Exact Numerical Methods 21 2.2.2 Approximate Explicit Solution for Calculating SDM Parameters 24 2.2.3 Validation of the Approximate Explicit Solution 27 2.3 Single-diode Model Simplification 30 2.3.1 Five-parameter versus Four-parameter Simplification 32 2.3.2 Explicit Equations for Calculating the Four SDM Parameters 34 2.4 Improved Models for Amorphous and Organic PV Technologies 37 2.4.1 Modified SDM for Amorphous PV Cells 37 2.4.2 Five-parameter Calculation for Amorphous Silicon PV Panels 38 2.4.3 Modified Model for Organic PV Cells 40 References 43 3 PV Simulation under Homogeneous Conditions 45 3.1 Introduction 45 3.2 Irradiance- and Temperature-dependence of the PV Model 45 3.2.1 Direct Effects of Irradiance and Temperature 45 3.2.2 Equations for “Translating” SDM Parameters 49 3.2.3 Iterative Procedure proposed by Villalva et al. 51 3.2.4 Modified PV Model proposed by Lo Brano et al. 52 3.2.5 Translating Equations proposed by Marion et al. 53 3.2.6 Modified Translational Equation proposed by Picault et al. 53 3.2.7 PV Electrical Model proposed by King et al. 56 3.2.8 Using the King Equation for Estimating the SDM Parameter Drift 59 3.3 Simplified PV Models for Long-term Simulations 61 3.3.1 King Equations for Long-term Simulations 63 3.3.2 Performance Prediction Model based on the Fill Factor 68 3.3.3 PV Modeling based on Artificial Neural Networks 69 3.4 Real-time Simulation of PV Arrays 71 3.4.1 Simplified Models including the Power Conversion Stage 72 3.5 Summary of PV Models 75 References 77 4 PV Arrays in Non-homogeneous Conditions 81 4.1 Mismatching Effects: Sources and Consequences 81 4.1.1 Manufacturing Tolerances 81 4.1.2 Aging 82 4.1.3 Soiling and Snow 83 4.1.4 Shadowing 83 4.1.5 Module Temperature 86 4.2 Bypass Diode Failure 87 4.3 Hot spots and Bypass Diodes 89 4.4 Effect of Aging Failures and Malfunctioning on the PV Energy Yield 90 References 94 5 Models of PV Arrays under Non-homogeneous Conditions 97 5.1 The use of the Lambert W-Function 98 5.2 Application Examples 102 5.2.1 The Entire I–V Curve of a Mismatched PV String 102 5.2.2 The Operating Point of a Mismatched PV String 104 5.3 Guess Solution by Inflection-point Detection 106 5.4 Real-time Simulation of Mismatched PV Arrays 108 5.5 Estimation of the Energy Production of Mismatched PV Arrays 109 References 111 6 PV array Modeling at Cell Level under Non-homogeneous Conditions 113 6.1 PV Cell Modeling at Negative Voltage Values 113 6.1.1 The Bishop Term 113 6.1.2 Silicon Cells Type and Reverse Behavior 115 6.2 Cell and Subcell Modeling: Occurrence of Hot Spots 116 6.2.1 Cell Modeling 117 6.3 Simulation Example 121 6.4 Subcell PV Model 123 6.5 Concluding Remarks on PV String Modeling 124 References 124 7 Modeling the PV Power Conversion Chain 127 7.1 Introduction 127 7.2 Review of Basic Concepts for Modeling Power Converters 129 7.2.1 Steady-state Analysis 132 7.2.1.1 Steady-state Values 133 7.2.1.2 Ripple Magnitudes 133 7.2.2 Converter Dynamics Analysis 134 7.3 Effects of the Converter in the Power Conversion Chain 136 7.3.1 Steady-state Model of the Power Conversion Chain 136 7.3.2 Analysis and Simulation using the Steady-state Model 139 7.3.3 Voltage Ripple at the Generator Terminals 143 7.3.4 I–V Curve of the Power Conversion Chain 148 7.4 Modelling the Dynamics of the Power Conversion Chain 151 7.5 Additional Examples 159 7.5.1 MIU based on a Buck Converter 159 7.5.2 MIU based on a Buck–Boost Converter 161 7.6 Summary 162 References 163 8 Control of the Power Conversion Chain 165 8.1 Introduction 165 8.2 Linear Controller 166 8.3 Sliding-mode Controller 172 8.3.1 Inductor Current Control 173 8.3.2 Capacitor Current Control 179 8.4 Summary 183 References 184 Index 000
£99.70
John Wiley & Sons Inc Photovoltaic Solar Energy
Book SynopsisPhotovoltaic Solar Energy Thoroughly updated overview of photovoltaic technology, from materials to modules and systems Volume 2 of Photovoltaic Solar Energy provides fundamental and contemporary knowledge about various photovoltaic technologies in the framework of material science, device physics of solar cells, chemistry for manufacturing, engineering of PV modules, and the design aspects of photovoltaic applications, with the aim of informing the reader about the basic knowledge of each aspect of photovoltaic technologies and applications in the context of the most recent advances in science and engineering. The text is written by leading specialists for each topic in a concise manner and includes the most recent references for deeper study. Moreover, the book gives insights into possible future developments in the field of photovoltaics. The book builds on the success of Volume 1 of Photovoltaic Solar Energy, which was published by Wiley in
£86.36
John Wiley & Sons Inc Modelling Photovoltaic Systems Using PSPICE
Book SynopsisPhotovoltaics (PV), the direct conversion of light from the sun into electricity, is an increasingly important means of distributed power generation. Using SPICE, the tool of choice for circuits and electronics designers, this book highlights the increasing importance of modelling techniques in the quantitative analysis of PV systems.Table of ContentsForeword. Preface. Acknowledgements. Introduction to Photovoltaic Systems and PSpice. Spectral Response and Short-Circuit Current. Electrical Characteristics of the Solar Cell. Solar Cell Arrays, PV Modules and PV Generators. Interfacing PV Modules to Loads and Battery Modelling. Power Conditioning and Inverter Modelling. Standalone PV Systems. Grid-connected PV Systems. Small Photovoltaics. Annex 1 PSpice Files Used in Chapter 1. Annex 2 PSpice Files Used in Chapter 2. Annex 3 PSpice Files Used in Chapter 3. Annex 4 PSpice Files Used in Chapter 4. Annex 5 PSpice Files Used in Chapter 5. Annex 6 PSpice Files Used in Chapter 6. Annex 7 PSpice Files Used in Chapter 7. Annex 8 PSpice Files Used in Chapter 8. Annex 9 PSpice Files Used in Chapter 9. Annex 10 Summary of Solar Cell Basic Theory. Annex 11 Estimation of the Radiation in an Arbitrarily Oriented Surface. Index.
£153.85
John Wiley & Sons Inc Modelling Photovoltaic Systems Using PSpice
Book SynopsisPhotovoltaics (PV), the direct conversion of light from the sun into electricity, is an increasingly important means of distributed power generation. Using SPICE, the tool of choice for circuits and electronics designers, this book highlights the increasing importance of modelling techniques in the quantitative analysis of PV systems.Table of ContentsIntroduction to Photovoltaic Systems and Pspice Spectral Response and Short Circuit Current Electrical Characteristics of the Solar Cell Solar Cell Arrays PV Modules and PV Generators Interfacing PV Modules to Loads and Battery Modelling Power Conditioning and Inverter Modelling Stand - Alone PV Systems Grid Connected PV Systems Small Photovoltaics
£65.50
John Wiley & Sons Inc Handbook of Concentrator Photovoltaic Technology
Book SynopsisConcentrator Photovoltaics (CPV) is one of the most promising technologies to produce solar electricity at competitive prices. High performing CPV systems with efficiencies well over 30% and multi-megawatt CPV plants are now a reality.Table of ContentsList of Contributors xix Preface xxiii 1 Direct Normal Radiation 1Daryl R. Myers 1.1 Concepts and Definitions 1 1.1.1 Orbital and Geometrical Considerations 1 1.1.2 The Solar Constant 2 1.1.3 Temporal Variations in Extraterrestrial Radiation (ETR) 3 1.1.4 Extraterrestrial Radiation Spectral Power Distribution 4 1.1.5 The Atmospheric Filter 6 1.2 Measuring Broadband Direct Solar Radiation 8 1.2.1 Pyrheliometers 8 1.2.2 Rotating Shadow Band Radiometers 11 1.2.3 Reference Standards, the World Radiometric Reference (WRR) 13 1.2.4 Calibration of Pyrheliometers 16 1.2.5 Accuracy and Uncertainty 17 1.2.6 Summary of Guide to Uncertainty in Measurement (GUM) Approach 18 1.2.7 Measurement Data Quality 20 1.3 Modeling Broadband Direct Solar Radiation 21 1.3.1 Models for Direct Beam Irradiance 21 1.3.2 Atmospheric Component Transmittance 22 1.3.3 Estimating Direct Beam Radiation from Hemispherical Data 25 1.4 Modeling Spectral Distributions 26 1.4.1 Bird Simple Spectral Model (SPCTRL2) 27 1.4.2 Simple Model for Atmospheric Transmission of Sunshine (SMARTS) 28 1.4.3 Spectral Distributions from Broadband Data 28 1.5 Resources for Broadband Estimates of CPV Performance 29 1.5.1 Broadband Direct Beam Radiation Data Resources 29 1.5.2 Typical Meteorological Year Data for CPV Performance Estimates 31 1.5.3 CPV Spectral Performance Issues 33 1.6 Sunshape 33 1.6.1 The Solar Disk 33 1.6.2 Circumsolar Radiation 36 1.6.3 Recent Circumsolar Radiation Research 39 1.7 Direct Solar Radiation Climates 40 1.7.1 Measurement Networks and Data 41 1.7.2 Concentrating Solar Power Site Selection 41 1.7.3 Concentrating Solar Power Resource Map Examples 43 1.7.4 Solar Resource Maps and Data Internet Resources 47 1.8 Consensus Standards for Direct Solar Radiation Applications 48 1.8.1 World Radiometric Reference 48 1.8.2 Solar Radiometric Instrumentation Calibration 48 1.8.3 Spectral Calibration Standards 49 1.8.4 Standard and Reference Spectral Distributions 49 Glossary 50 List of Acronyms 50 List of Symbols 51 References 53 2 Concentrator Multijunction Solar Cells 59Ignacio Rey-Stolle, Jerry M. Olson, and Carlos Algora 2.1 Introduction 59 2.2 Fundamentals 60 2.2.1 Fundamentals of Photovoltaic Cells 60 2.2.2 Fundamentals of Multijunction Solar Cells 63 2.3 Multijunction Solar Cell Structures 67 2.3.1 Historical Development of Multijunction PV Converters 68 2.3.2 Designing Multijunction Solar Cell Structures 73 2.4 Multijunction Solar Cell Modeling 79 2.4.1 Numerical Modeling of Multijunction Solar Cell Structures 79 2.4.2 Analytical Modeling of Multijunction Solar Cells 81 2.4.3 Further Steps: Distributed Circuit-based Modeling 98 2.5 Concentrator Requirements 103 2.5.1 High Efficiency 103 2.5.2 Series Resistance. Grid Designs 107 2.5.3 Tunnel Junctions 110 2.5.4 Distributed Effects 113 2.5.5 Atmospheric Spectral Variations and Impact on Energy Yield 116 2.5.6 Temperature Effects 118 2.6 Description of Different Cell Approaches 118 2.6.1 Lattice-matched GaInP/GaAs/Ge 118 2.6.2 Metamorphic GaInP/GaInAs/Ge 119 2.6.3 Inverted Metamorphic GaInP/GaAs/GaInAs 120 2.6.4 Double Sided Epi 122 2.6.5 Lattice Matched GaInP/GaAs/GaInNAs 122 2.6.6 Quantum Dot and Quantum Well Multijunction Solar Cells 123 2.6.7 More Junctions (4, 5, 6) 123 2.6.8 Stacked Multijunction Cells 124 2.6.9 III-Vs on Silicon 124 2.6.10 Epitaxial Liftoff 126 Acknowledgements 127 Glossary 127 List of Acronyms 127 List of Symbols 127 References 129 3 Emerging High Efficiency Concepts for Concentrator Solar Cells 137Ignacio Tobías and Antonio Luque 3.1 Introduction 137 3.2 Thermodynamic Efficiency Limits 138 3.2.1 Disequilibria and Energy Conversion in Solar Cells 140 3.2.2 Thermodynamic Efficiencies 142 3.3 Detailed Balance Modeling of Solar Cells 143 3.3.1 Shockley–Queisser Model of a Solar Cell 144 3.3.2 The System with Infinite Monochromatic Solar Cells 146 3.4 Solar Cell Concepts Exceeding the Single Junction Shockley–Queisser Limit 148 3.4.1 Multijunction Solar Cells 148 3.4.2 Hot Carrier Solar Cells 149 3.4.3 Carrier Multiplication or Multi-Exciton Generation Solar Cells 152 3.4.4 Intermediate Band Solar Cells 155 3.5 Other Concepts 159 3.5.1 Light Management for High Efficiency Photovoltaics 160 3.5.2 Spectrum Conversion 161 3.6 Nanostructures in Solar Cells 162 3.6.1 Electron States in Nanostructures 162 3.6.2 Light Absorption by Nanostructures 173 3.6.3 Relaxation, Capture and Recombination in Nanostructures 176 3.6.4 Nanostructures for Multijunction Solar Cells 177 3.6.5 Fabrication Techniques 178 Glossary 179 List of Acronyms 179 References 179 4 CPV Optics 187Rubén Mohedano and Ralf Leutz 4.1 Introduction 187 4.2 Light, Optics and Concentration 188 4.2.1 Light and Optics 189 4.2.2 Optics for Concentration Photovoltaics 190 4.3 Optical Background 192 4.3.1 Basic Concepts in Geometrical Optics 192 4.3.2 Basic Concepts in Nonimaging Optics 196 4.4 Design of the Optical Train: Calculation of Surfaces 202 4.4.1 Types of Concentrators as a Function of Concentration Level 203 4.4.2 Design Examples 204 4.4.3 Secondary Optical Elements: Design Details 210 4.5 Performance Analysis and Optimization of the Optical Train 213 4.5.1 Efficiency. Sources of Losses 215 4.5.2 Ray Trace Modeling 220 4.6 Optics Manufacturing 224 4.6.1 Optical Materials for CPV 224 4.6.2 Tolerance Budget 226 4.6.3 Manufacturing of Primary Optical Elements 227 4.6.4 Manufacturing of Secondary Optic Elements 231 4.7 Impact of CPV Optics in a Nutshell 232 Glossary 233 List of Acronyms 233 List of Symbols 234 References 235 Annex 4-I: Étendue Calculation 239 Annex 4-II: 2D Treatment of Rotational and Linear 3D Optical Systems 241 Annex 4-III: Design of the XR Concentrator 242 5 Temperature Effects on CPV Solar Cells, Optics and Modules 245Iván García, Marta Victoria, and Ignacio Antón 5.1 Introduction 245 5.2 Effects of Temperature on CPV Solar Cells 246 5.2.1 Dependence of the Bandgap on Temperature 246 5.2.2 Dependence of the Solar Cell Parameters on Temperature 248 5.2.3 Influence of Concentration on the Sensitivity to Temperature 260 5.2.4 Experimental Measurements on Real Solar Cells 261 5.2.5 Summary of Temperature Effects in CPV Multijunction Solar Cells 264 5.3 Temperature Effects and Thermal Management in CPV Optics and Modules 266 5.3.1 Temperature Effects on CPV Optics and Modules 266 5.3.2 Thermal Coefficients of CPV Modules 270 5.3.3 Heat Extraction Strategies 274 Glossary 286 List of Acronyms 286 List of Symbols 286 References 287 6 CPV Tracking and Trackers 293Ignacio Luque-Heredia, Pedro Magalhães, and Matthew Muller 6.1 Introduction 293 6.2 Requirements and Specifications 294 6.3 Basic Taxonomy of CPV Trackers 297 6.4 Design of CPV Trackers – Structural Considerations 300 6.5 Sun Tracking Control 307 6.5.1 Background 307 6.5.2 The Autocalibrated Sun Tracking Control Unit 311 6.6 Sun Tracking Accuracy 315 6.6.1 The Tracking Accuracy Sensor 315 6.6.2 The Monitoring System 316 6.6.3 Accuracy Assessment: Example of the Autocalibrated Tracking Strategy 318 6.7 Designing for Optimal Manufacturing and Field Works 322 6.7.1 Manufacturing Considerations 322 6.7.2 Field Works Considerations 324 6.8 Description and Performance of Current Tracker Approaches 327 6.8.1 Parabolic Trough 327 6.8.2 Single-Pole Az.-El. Trackers 328 6.8.3 Tilt-Roll Trackers 330 6.8.4 Carrousel Trackers 331 6.8.5 Variations to Main Architectures in the Field 332 6.9 International Standards for Solar Trackers 334 References 337 7 CPV Modules 339Stephen Askins and Gabriel Sala Pano 7.1 Introduction 339 7.2 What is a CPV Module? 339 7.3 Definition, Functions, and Structure of a CPV Module 341 7.3.1 Functions of a CPV Module 342 7.3.2 General Terms and Definitions 343 7.3.3 Structure of a CPV Module 343 7.4 Design Process and Prototyping Stages 349 7.5 Concentration Ratio and Cell Size 353 7.5.1 Concentration Ratio 353 7.5.2 Cell Size Selection 353 7.5.3 Module Size and Length 356 7.5.4 Market Survey 357 7.6 Opto-Mechanics of CPV Modules 359 7.6.1 Acceptance Angle 359 7.6.2 Acceptance Angle Budget 361 7.6.3 External Tolerances 362 7.6.4 Internal Tolerances 363 7.7 Electrical Design 372 7.7.1 Module Voltages and Dielectric Strength 372 7.7.2 Series Connections and Bypass Diodes 373 7.7.3 Parallel Connections and Blocking Diodes 374 7.8 Thermal Design 375 7.8.1 Target Cell Temperature 376 7.8.2 Simplified Thermal Model 377 7.9 Venting Considerations 389 7.10 Manufacturing Processes for CPV Modules 390 7.10.1 Chassis and Backplane Fabrication 390 7.10.2 Heat Sink Fabrication 395 7.10.3 Module Assembly 398 7.11 Standards Applicable to CPV Modules 399 Glossary 401 References 403 Annex 7-I: Abengoa’s CPV Modules and Systems 406José A. Pérez, Sebastián Caparrós, Justo Albarrán, and Antonio de Dios Annex 7-II: CPV Modules and Systems from Daido Steel 413Kenji Araki Annex 7-III: Soitec CPV Modules and Systems 419Francisca Rubio, Sven T. Wanka, and Andreas Gombert Annex 7-IV: Suncore Photovoltaics’ CPV Modules 426James Foresi 8 CPV Power Plants 433María Martínez, Daniel Sánchez, Francisca Rubio, Eduardo F. Fernández, Florencia Almonacid, Norman Abela, Tobias Zech, and Tobias Gerstmaier 8.1 Introduction 433 8.2 Construction of CPV Plants 434 8.2.1 Preliminary Works 434 8.2.2 Basic Engineering Study 436 8.2.3 Detailed Engineering 437 8.2.4 Construction Phase 440 8.3 CPV Inverters: Configurations and Sizing 445 8.3.1 Types of Configurations 446 8.3.2 Sizing of the Inverter 448 8.4 Optimized Distribution of Trackers 450 8.4.1 State of the Art 451 8.4.2 Procedure for Optimizing the Distribution of Trackers 452 8.5 Considerations of Environmental Impact and Dual Use of the Land 456 8.6 CPV Plant Monitoring and Production Data Analysis 458 8.6.1 Monitoring System: Registering the Operating Parameters 459 8.6.2 Monitoring System: Controlling a CPV Plant 460 8.6.3 Analysis of Production Data 461 8.7 Operation and Maintenance 464 8.7.1 Operation 465 8.7.2 Maintenance 467 8.8 Power Rating of a CPV Plant 470 8.8.1 ISFOC Approach 470 8.8.2 International ASTM Standards 471 8.8.3 International IEC Standards 472 8.9 Modeling the Energy Production of CPV Power Plants 477 8.9.1 Basic Models 477 8.9.2 Input Data and Quality Checks 478 8.9.3 Loss Mechanisms 479 Glossary 484 List of Acronyms 484 List of Symbols 485 References 486 Annex 8-I: Software Tools for CPV Plant Design and Analysis 491 Annex 8-II: CPV Power Plants at ISFOC 501María Martínez, Daniel Sánchez, Óscar de la Rubia, and Francisca Rubio Annex 8-III: Soitec Power Plants 513Andreas Gombert, Norman Abela, Tobias Gerstmeier, Shelley Bambrook, and Francisca Rubio 9 Reliability 521Carlos Algora, Pilar Espinet-Gonzalez, Manuel Vázquez, Nick Bosco, David Miller, Sarah Kurtz, Francisca Rubio, and Robert McConnell 9.1 Introduction 521 9.2 Fundamentals of Reliability 521 9.2.1 Reliability Functions 522 9.2.2 Statistical Distribution Functions 524 9.2.3 Accelerated Life Tests 529 9.2.4 Reliability Versus Qualification 532 9.3 Reliability of Solar Cells 533 9.3.1 Issues in Accelerated Aging Tests in CPV Solar Cells 533 9.3.2 Types of Failure 538 9.3.3 Failures in Real Time Operation 539 9.3.4 Accelerated Life Tests 539 9.3.5 Reliability of Similar Devices 546 9.3.6 Links Among Degradation Studies, Reliability and Qualification Standards 548 9.4 Reliability of Modules 549 9.4.1 Introduction 549 9.4.2 Die-attach 549 9.4.3 CPV Encapsulation 552 9.4.4 CPV Optics 555 9.4.5 Other CPV Module Reliability Issues 562 9.5 Reliability of Systems and Plants 562 9.5.1 Performance Degradation in Power Plants 563 9.5.2 Failures of Components 568 9.5.3 Qualification Tests on Power Plants Components 572 9.5.4 Aging Tests 575 9.6 Standards Development for CPV 577 9.6.1 Standards as the Mark of a Mature Industry 577 9.6.2 History of CPV Standards Development 577 Acknowledgement 582 References 582 10 CPV Multijunction Solar Cell Characterization 589Carl R. Osterwald and Gerald Siefer 10.1 Introduction 589 10.2 Basic Concepts About Multijunction Solar Cells for Characterization Purposes 590 10.2.1 Review of Multijunction Solar Cell Theory 590 10.2.2 Definition of CPV Cell Efficiency 592 10.2.3 Current-Voltage as a Function of Concentration 593 10.3 Spectral Matching and Adjustment 594 10.3.1 Isotype Method 594 10.3.2 Reference Cell Method 594 10.3.3 Rij Method and Linear Equation System Method 595 10.3.4 Effects of Subcell Mismatching 597 10.4 Flash Solar Simulators: Description and Limitations 600 10.4.1 Sources and Optics 600 10.4.2 Adjusting Total Intensity 600 10.4.3 Irradiance Versus Time 600 10.4.4 Spectral Irradiance Adjustment 601 10.4.5 Spectral Irradiance Measurement 602 10.5 Concentrator Solar Cell Characterization 603 10.5.1 Overview 603 10.5.2 Area Measurement 603 10.5.3 External Quantum Efficiency 604 10.5.4 One-Sun Light I-V and One-Sun Short Circuit Current Calibration 607 10.5.5 Concentration I-V 608 10.5.6 Uncertainty Analysis 608 10.5.7 Open Challenges 610 Acknowledgments 611 Glossary 611 List of Acronyms 611 List of Symbols 611 References 612 11 Characterization of Optics for Concentrator Photovoltaics 615Maikel Hernández 11.1 Introduction 615 11.2 Geometrical Characterization 616 11.2.1 Faceted Optics 617 11.2.2 Non-faceted Optics 620 11.3 Optical Characterization 624 11.3.1 Measurement of the Optical Efficiency 624 11.3.2 POE Scattering Basic Measurements 628 11.3.3 Acceptance Angle Measurement 629 11.3.4 Spectral Irradiance Distribution Measurement at the Solar Cell Plane 633 11.3.5 Angular Power Distribution at the Solar Cell Plane 634 11.3.6 In-line Characterization of Optics in Production 634 Glossary 636 List of Acronyms 636 List of Symbols 636 References 637 12 Characterization of CPV Modules and Receivers 639César Domínguez, Rebeca Herrero, and Ignacio Antón 12.1 Introduction 639 12.2 Figures of Merit of PV Concentrators 640 12.2.1 Reporting CPV Module Performance 640 12.2.2 Performance Indicators for Concentrator Optics 642 12.3 Instruments and Methods for CPV Characterization 643 12.3.1 Indoors versus Outdoors 643 12.3.2 Operating Conditions Relevant to CPV 644 12.3.3 Tracker Requirements 650 12.3.4 Alignment Procedures 651 12.3.5 Rating CPV Module Performance 652 12.3.6 Spectral Characterization of CPV Modules and Receivers 656 12.3.7 Angular Transmission Curve 660 12.3.8 Uncertainties of Instruments and Methods for CPV Characterization 662 12.4 Indoor Measurements of CPV Modules 663 12.4.1 Solar Simulators for CPV Modules 663 12.4.2 Reference Sensor 668 12.4.3 Caveats on Indoor Measurements 672 12.4.4 Angular Transmission Curve: Direct and Inverse Methods 674 12.4.5 Uncertainties in the Indoor Measurement of I-V Curves 678 Glossary 678 List of Acronyms 678 List of Symbols 678 References 679 13 Life Cycle Analysis of CPV Systems 685Vasilis Fthenakis 13.1 Introduction 685 13.2 Case Study Description 686 13.3 Methodology 687 13.4 Life-Cycle Inventory Analysis 688 13.4.1 Production of Materials and Associated Emissions 688 13.4.2 Solar Cell Manufacturing 690 13.4.3 Primary Energy Demand 692 13.4.4 End-of-Life Processing 693 13.5 System Performance Data and Estimates 694 13.6 Energy Payback Time 695 13.7 Greenhouse and Toxic Gas Emissions 696 13.7.1 Emissions in the Life-Cycle of Amonix 7700 696 13.7.2 Reduction of Emissions from PV Replacing Electricity from the Grid 697 13.8 Land and Water Use in CPV Systems 699 13.9 Discussion and Comparison with Other CPV and PV Systems 700 13.9.1 Comparison with Other CPV Systems 700 13.9.2 Comparison with Other PV Systems 701 Glossary 702 List of Acronyms 702 List of Symbols 702 References 703 Annex 13-I: Energy Flow Diagrams for Amonix 7700 System Components 705 14 Cost Analysis 711Carlos Algora, Diego L. Talavera, and Gustavo Nofuentes 14.1 Introduction 711 14.2 Basic Concepts of Cost and Profitability Analysis 711 14.2.1 Elements of the Investment 712 14.2.2 Present and Future Worth of Sums. The Impact of Inflation 712 14.2.3 The Discount Rate 713 14.2.4 Effect of Inflation 713 14.2.5 Impact of Taxation 714 14.2.6 Financing 714 14.3 Review of Profitability Analysis 715 14.3.1 The Life Cycle Cost of a CPV System 715 14.3.2 The Present Worth of the Cash Inflows Generated by a CPV System 717 14.3.3 Assessment of the Profitability of a CPV System 718 14.3.4 Sensitivity Analysis on the Profitability of CPV Systems 720 14.4 The Cost of CPV 728 14.4.1 The Cost of CPV Systems 728 14.4.2 Levelized Cost of Electricity (LCOE) of CPV 735 14.4.3 Towards the CPV Grid Parity 746 Glossary 754 References 756 Index 759
£107.95
John Wiley & Sons Inc StepbyStep Design of LargeScale Photovoltaic
Book SynopsisHow to design a solar power plant, from start to finish In Step-by-Step Design of Large-Scale Photovoltaic Power Plants, a team of distinguished engineers delivers a comprehensive reference on PV power plantsand their designfor specialists, experts, and academics. Written in three parts, the book covers the detailed theoretical knowledge required to properly design a PV power plant. It goes on to explore the step-by-step requirements for creating a real-world PV power plant, including parts and components design, mathematical formulations and calculations, analyses, evaluations, and planning. The book concludes with a discussion of a sample solar plant design, as well as tips on how to avoid common design mistakes, and how to handle the operation and maintenance of PV power plants. Step-by-Step Design of Large-Scale Photovoltaic Power Plants also includes: Thorough introductions to the basic requirements of design, economic analyses, and investTable of Contents PREFACE ACKNOWLEDGMENTS ACRONYMS SYMBOLS 1 Introduction 1.1 Solar Energy 1 1.2 Diverse Solar Energy Applications 1 1.2.1 Solar Thermal Power Plant 2 1.2.2 PV Thermal Hybrid Power Plants 4 1.2.3 PV Power Plant 4 1.3 Global PV Power Plants 9 1.4 Perspective of PV Power Plants 11 1.5 A Review on the Design of Large-Scale PV Power Plant 13 1.6 Outline of the Book 14 References 15 2 Design Requirements 19 2.1 Overview 19 2.2 Development Phases 19 2.2.1 Concept Development and Site Identification 20 2.2.2 Prefeasibility Study 20 2.2.3 Feasibility Study 20 2.2.4 Permitting, Financing and Contracts 20 2.2.5 Detailed Design and Engineering 21 2.2.6 Construction 21 2.2.7 Commercial Operation 21 2.3 Project Predesign 21 2.4 Project Detailed Design 21 2.5 The Main Components Required for Realizing an LS-PVPP 22 2.5.1 PV Panels (PV Module) 22 2.5.2 Solar Inverter 22 2.5.3 Photovoltaic Mounting Systems (Solar Module Racking) 26 2.5.4 DC Cable 26 2.5.5 DC Combiner Box 26 2.5.6 DC Protection System 26 2.5.7 AC Combiner Box 26 2.5.8 Low-Voltage Switchgear 26 2.5.9 Transformers 27 2.5.10 Medium-Voltage Switchgear 27 2.5.11 LV and MV AC Cables 27 2.5.12 AC Protection Devices 27 2.6 An Overview of PV Technologies 27 2.6.1 Background on Solar Cell 27 2.6.2 Types and Classifications 28 2.7 Solar Inverter Topologies Overview 28 2.7.1 Central Inverter 28 2.7.2 String Inverter 29 2.7.3 Multi-string Inverter29 2.7.4 Micro-Inverter 29 2.8 Solar Panel Mounting 30 2.9 Solar Panel Tilt 30 2.10 Solar Tracking System 31 2.10.1 One-Axis Tracker 31 2.10.1.1 North–South Horizontal-Axis Tracking 31 2.10.1.2 Polar Tracking 31 2.10.1.3 East–West Horizontal-Axis Tracking 31 2.10.1.4 Azimuthal-Axis Tracking 32 2.10.2 Two-Axis Tracker 32 2.10.3 Driving Motor 32 2.10.4 Solar Tracker Control 33 References 34 3 Feasibility Studies 35 3.1 Introduction 35 3.2 Preliminary Feasibility Studies 35 3.3 Technical Feasibility Study 36 3.3.1 Site Selection 36 3.3.1.1 Amount of Sunlight 36 3.3.1.2 Land Area and Geometry 36 3.3.1.3 Climate Conditions 37 3.3.1.4 Site Access to Power Grid 38 3.3.1.5 Site Road Access 38 3.3.1.6 Site Topography 38 3.3.1.7 Land Geotechnics and Seismicity 40 3.3.1.8 Drainage, Seasonal Flooding 41 3.3.1.9 Land Use and Legal Permits 41 3.3.1.10 Air Pollution and Suspended Solid Particles 42 3.3.1.11 Geopolitical Risk 43 3.3.1.12 Financial Incentives 43 3.3.2 Annual Electricity Production 43 3.3.3 Equipment Technical Specifications 43 3.3.4 Execution and Construction Processes 43 3.3.5 Site Plan 43 3.4 Environmental Feasibility 44 3.5 Social Feasibility 45 3.6 Economic Feasibility 45 3.6.1 Financial Model Inputs 45 3.6.2 Financial Model Results 47 3.6.3 Financial and Economic Indicators 48 3.6.4 Financial Indicators 48 3.6.4.1 Net Present Value 48 3.6.4.2 Internal Rate of Return 48 3.6.4.3 Investment Return Period 49 3.6.4.4 Break Even Point 49 3.7 Timing Feasibility 50 3.8 Summary 50 References 51 4 Grid Connection Studies 53 4.1 Introduction 53 4.2 Introducing Topics of Grid Connection Studies 53 4.2.1 Load Flow Studies 53 4.2.2 Contingency (N-1) 54 4.2.3 Three-phase and Single-phase Short Circuit Studies 55 4.2.4 Grounding System Studies 55 4.2.5 Network Protection Studies 56 4.2.6 Power Quality Studies 57 4.2.7 Stability Studies 58 4.3 Modeling of Grid and PV Power Plants 59 4.3.1 Background Information Required for Modeling 59 4.3.2 Simulation of PV Plant and Network 60 4.3.3 Load Flow Studies Before and After PV Plant Connection 60 4.3.4 Contingency (N-1) Studies Before and After PV Plant Connection 66 4.3.5 Three-phase Short Circuit Studies 68 4.3.6 Power Quality Studies 68 4.3.7 Sustainability Studies 72 4.3.8 Investigating Additional Parameters for Grid Connection Studies 73 4.4 Summary 76 References 76 5 Solar Resource and Irradiance 79 5.1 Introduction 79 5.2 Radiometric Terms 79 5.2.1 Extraterrestrial Irradiance 79 5.2.2 Solar Geometry 80 5.2.3 Solar Radiation and Earth’s Atmosphere 81 5.3 Solar Resources 82 5.3.1 Satellite Solar Data 86 5.3.2 Radiation Measurement 86 5.4 Solar Energy Radiation on Panels 86 5.5 Solar Azimuth and Altitude Angle 89 5.6 Tilt Angle and Orientation 92 5.7 Shadow Distances and Row Spacing 95 5.7.1 Sun Path 96 5.7.2 Shadow Calculations for Fixed PV Systems 96 5.7.3 Shadow Calculations for Single-Axis Tracking PV Systems) Horizontal E–W Tracking Axis) 99 References 100 6 Large-Scale PV Plant Design Overview 101 6.1 Introduction 101 6.2 Classification of LSPVPP Engineering Documents 101 6.2.1 Part 1: Feasibility Study 101 6.2.2 Part 2: Basic Design 102 6.2.3 Part 3: Detailed Design and Shop Drawing 107 6.2.4 Part 4: As-Built and Final Documentation 107 6.3 Roadmap Proposal for LSPVPP Design 108 6.3.1 Project Definition 108 6.3.2 Collecting General Information 109 6.3.3 Collecting Information By Site Visit 109 6.3.4 Limitations and Obstacles Identification 110 6.3.5 PV Module and Inverter Selection111 6.3.6 String Size Calculations 111 6.3.7 Solar PV Mounting Structure Selection 111 6.3.8 Tilt Angle Calculation 113 6.3.9 Calculations of Far and Near Shading 113 6.3.10 Optimization Process 113 6.3.11 Energy Balance and Value Engineering 115 6.3.12 Optimal Transformer Size 116 6.3.13 General SLD and Layout 116 6.3.14 Detailed Design 117 6.3.15 Electrical Parameters and Value Engineering 117 6.3.16 Preparing Final Documents 117 6.4 Conclusion 117 References 118 7 PV Power Plant DC Side Design 119 7.1 Introduction 119 7.2 DC Side Design Methodology 119 7.3 PV Modules Selection 121 7.3.1 Module Technology 121 7.3.2 PV Module Size 123 7.3.3 Selection Criteria 123 7.4 Inverter Selection 123 7.4.1 Inverter Topologies 126 7.4.1.1 Micro Inverter 126 7.4.1.2 Multi-string Inverter 126 7.4.1.3 String Inverter 126 7.4.1.4 Central Inverter 126 7.4.1.5 Virtual Central Inverter 128 7.4.2 Comparison of Inverter Topologies 128 7.5 PV Modules Number 129 7.5.1 Method 1 133 7.5.1.1 Minimum String Size 133 7.5.1.2 Maximum String Size 134 7.5.1.3 Determining Maximum Current of a PV Module 135 7.5.1.4 Determining Number of Inverters 135 7.5.2 Method 2 136 7.6 Size of PV Plant DC Side 136 7.7 DC Cables 138 7.7.1 Criteria 138 7.7.2 DC Cables Cross Section 139 7.7.2.1 Current Capacity 139 7.7.2.2 Voltage Drop 141 7.7.2.3 Power Loss 143 7.7.2.4 Short-circuit Current 143 7.8 DC Box Combiner 144 7.9 String Diode 145 7.10 Fuse 145 7.10.1 Rated Voltage 146 7.10.2 Rated Current 146 7.10.3 Fuse Testing 147 7.10.4 Melting Time 147 7.11 Surge Arrester 148 7.12 DC Switch 149 7.13 Conclusion 150 Note 150 References 150 8 PV System Losses and Energy Yield 8.1. Introduction 8.2. PV System Losses 8.2.1. Sunlight Losses 8.2.1.1. Array Incidence Losses 8.2.1.2. Soiling Losses 8.2.1.3. Dust Losses 8.2.1.4. Snow Losses 8.2.2. Sunlight into DC Electricity Conversion 8.2.2.1. Temperature-r Related Losses 8.2.2.2. Shading Losses 8.2.2.3. Low Irradiance 8.2.2.4. Module Quality 8.2.2.5. Light-Induced Degradation 8.2.2.6. Potential-Induced Degradation 8.2.2.7. Manufacturing Module Mismatch 8.2.2.8. Degradation 8.2.3. DC to AC Conversion Losses 8.2.3.1. Inverter Losses 8.2.3.2. MPPT Losses 8.2.3.3. Tracking Curtailment 8.2.3.4. PV Plant DC Losses 8.2.4. PV Plant AC Losses 8.2.4.1. AC Losses 8.2.4.2. Auxiliary Power Losses 8.2.4.3. Downtime and Unavailability 8.2.4.4. Grid Compliance Losses 8.3. Energy Yield Prediction 8.3.1. Irradiation on Modules 8.3.2. PV Plant Losses 8.3.3. Performance Modeling 8.3.4. Uncertainty in Energy Yield 8.3.5. Performance Ratio 8.3.6. Capacity Factor 8.4. Conclusion References
£101.66
Cambridge University Press Photovoltaic Science and Technology
Book SynopsisA useful text for readers in the field of solar photovoltaics (SPV), covering fundamental concepts, current devices and technologies as well as new materials and devices. Photovoltaic applications are explained for different types of SPV systems: from grid-connected to stand-alone, with plenty of solved examples and exercises for readers.Table of ContentsFigures; Tables; Preface; Acknowledgement; 1. Introduction to solar energy and solar photovoltaics; 2. Crystalline silicon cells; 3. Thin film solar cells; 4. III-V compound, concentrator and photoelectrochemical cells; 5. Organic and polymer solar cells; 6. Manufacture of c-Si and III-V based high efficiency solar PV cells; 7. Manufacture of solar PV modules; 8. Characterization, testing, and reliability of solar PV module; 9. Overview of solar PV system technology and design; 10. Design and implementation of off-grid and on-grid SPV systems; Index.
£79.99
John Wiley & Sons Inc Photovoltaic Conversion of Concentrated Sunlight
Book SynopsisPhotovoltaic conversion is a process for the direct conversion of sunlight into electricity. This book is a survey of recent achievements in solar concentration techniques for photovoltaic electricity generation.Table of ContentsFundamentals of Photovoltaic Conversion of Concentrated Sunlight(V. Rumyantsev). Ohmic Losses in Solar Cells (V. Rumyantsev). Concentrator Solar Cells (V. Andreev). Luminescent Phenomena in Concentrator Solar Cells (V.Rumyantsev). Transfer and Distribution of Radiant Energy in ConcentrationSystems (V. Grilikhes). Optimization of Solar Photovoltaic Power Plants with Concentrators(V. Grilikhes). Index.
£245.66
Arcler Education Inc Quantum Dot Photovoltaics
Book SynopsisQuantum Dot Photovoltaics examines various aspects of next-gen photovoltaics to have a deeper understanding of colloidal quantum confined semi-conductor nanostructures. It includes the meaning of quantum dot photovoltaics and fabrication protocols required for such solar cells. Provide the reader with the insights into the development of solar energy conversion and the current status of colloidal quantum dots in prototype solar cells, so as to understand the scientific challenges faced during the conversion of solar energy.
£135.20
Taylor & Francis Ltd Optical Modeling and Simulation of ThinFilm Photovoltaic Devices
Book SynopsisIn wafer-based and thin-film photovoltaic (PV) devices, the management of light is a crucial aspect of optimization since trapping sunlight in active parts of PV devices is essential for efficient energy conversions. Optical modeling and simulation enable efficient analysis and optimization of the optical situation in optoelectronic and PV devices.Optical Modeling and Simulation of Thin-Film Photovoltaic Devices provides readers with a thorough guide to performing optical modeling and simulations of thin-film solar cells and PV modules. It offers insight on examples of existing optical models, demonstrates the applicability of optical modeling, and presents concrete directions and solutions for improving the devices. Along with giving practical hints, the book highlights significant research, development, and production in the field. It covers numerous approaches of one-, two-, and three-dimensional optical modelingTable of ContentsPRINCIPLES: Optical Properties and Modeling Approaches. One-Dimensional Semi-Coherent Optical Modeling. Input and Output Parameters. Two- and Three-Dimensional Optical Modeling. APPLICATIONS: One-Dimensional Optical Simulations. Two-Dimensional Optical Simulations. Index.
£61.99
Cambridge University Press GridConnected Photovoltaic Power Generation
Book SynopsisCovering technical design and construction aspects as well as financial analysis and risk assessment, this professional reference work provides a comprehensive overview of solar power technology. Whether or not you have a technology background, this essential guide will help you to understand the design, construction, financial analysis, and risk assessment of solar power technology. The first two chapters present an uncomplicated overview of solar power technology physics, solar cell technology, applications, and equipment. In subsequent chapters, readers are introduced to fundamental econometric analysis in such a way that will allow anyone, whether or not they have a background in finance, to become familiar with the fundamental costing and financing of large scale solar power programs. This book is essential reading for anyone involved with solar power project development, and is suitable for both graduate students and professionals.Table of Contents1. Introduction to grid-connected solar power generation; 2. Solar power system integration and energy production; 3. Solar power system feasibility study; 4. Solar power financing; 5. Financing and risk management; 6. Grid-connected solar power system costing; 7. Engineering procurement and construction document; 8. Socioeconomic cost benefits analysis of solar power energy; 9. Contract agreements and legal language.
£101.65
Taylor & Francis Solar Photovoltaic Projects in the Mainstream Power Market
Book SynopsisThis is the first and probably the only book devoted to utility-scale solar power â perhaps the fastest-growing sector of the global energy market.Philip Wolfeâs book describes the development and operation of large-scale solar power stations, and will interest all those who want to understand how these multi-million dollar projects are designed, structured, financed, constructed and maintained. It contains case studies of the Waldpolenz Energy Park, Germany, Lopburi Solar Plant in Thailand and the Topaz Solar Farm in California. Also included are interviews from leading figures in the PV industry.It shows the state of the world market and links to an online resource that continues to track the explosive growth of the sector.The book is arranged in three sections: A description of solar projects in context, and how they are undertaken. Chapters on developing and structuring projects; siting, consenting and connection issues; building and opeTrade Review "... an excellent introduction to the solar photovoltaic project development and power markets sector... for those interested in learning how to develop a large- scale solar photovoltaic project and its related environmental impacts, Solar Photovoltaic Projects: In the Mainstream Power Market is the best book and most- easily assessable book available." - Gabriel Thoumi, CFA, Mongabay.com Table of Contents Part 1: Mainstream Photovoltaic Projects Part 2: Solar Power and Utility-scale Projects Part 3: Reference Section
£135.00
Taylor & Francis Ltd The Physics of Solar Energy Conversion
Book SynopsisResearch on advanced energy conversion devices such as solar cells has intensified in the last two decades. A broad landscape of candidate materials and devices were discovered and systematically studied for effective solar energy conversion and utilization. New concepts have emerged forming a rather powerful picture embracing the mechanisms and limitation to efficiencies of different types of devices. The Physics of Solar Energy Conversion introduces the main physico-chemical principles that govern the operation of energy devices for energy conversion and storage, with a detailed view of the principles of solar energy conversion using advanced materials.Key Features include: Highlights recent rapid advances with the discovery of perovskite solar cells and their development. Analyzes the properties of organic solar cells, lithium ion batteries, light emitting diodes and the semiconductor materials for hydrogen production byTable of Contents Contents Preface........................................................................................................................................................................xv Acknowledgments....................................................................................................................................................xvii Author.......................................................................................................................................................................xix Chapter 1 Introduction to Energy Devices...............................................................................................................1 References...............................................................................................................................................9 PART I Equilibrium Concepts and Kinetics Chapter 2 Electrostatic and Thermodynamic Potentials of Electrons in Materials...............................................13 2.1 Electrostatic Potential..................................................................................................................13 2.2 Energies of Free Electrons and Holes.......................................................................................... 14 2.3 Potential Energy of the Electrons in the Semiconductor............................................................. 17 2.4 The Vacuum Level....................................................................................................................... 17 2.5 The Fermi Level and the Work Function....................................................................................20 2.6 The Chemical Potential of Electrons........................................................................................... 21 2.7 Potential Step of a Dipole Layer or a Double Layer....................................................................23 2.8 Origin of Surface Dipoles............................................................................................................24 2.9 The Volta Potential......................................................................................................................25 2.10 Equalization of Fermi Levels of Two Electronic Conductors in Contact....................................27 2.11 Equilibration of Metal Junctions and the Contact Potential Difference......................................28 2.12 Equilibrium across the Semiconductor Junction.........................................................................29 General References............................................................................................................................... 31 References............................................................................................................................................. 31 Chapter 3 Voltage, Capacitors, and Batteries.........................................................................................................33 3.1 The Voltage in the Device...........................................................................................................33 3.2 Anode and Cathode.....................................................................................................................34 3.3 Applied Voltage and Potential Difference...................................................................................35 3.4 The Capacitor..............................................................................................................................37 3.5 Measurement of the Capacitance.................................................................................................38 3.6 Energy Storage in the Capacitor..................................................................................................40 3.7 Electrochemical Systems: Structure of the Metal/Solution Interface..........................................40 3.8 Electrode Potential and Reference Electrodes.............................................................................42 3.9 Redox Potential in Electrochemical Cells...................................................................................44 3.10 Electrochemical and Physical Scales of Electron Energy in Material Systems..........................45 3.11 Changes of Electrolyte Levels with pH.......................................................................................46 3.12 Principles of Electrochemical Batteries.......................................................................................47 3.13 Capacity and Energy Content......................................................................................................50 3.14 Practical Electrochemical Batteries............................................................................................. 51 3.14.1 Zinc-Silver Battery.......................................................................................................... 51 3.14.2 Sodium-Sulfur Battery....................................................................................................52 3.15 Li-Ion Battery.............................................................................................................................. 53 General References...............................................................................................................................57 References.............................................................................................................................................57 Chapter 4 Work Functions and Injection Barriers.................................................................................................59 4.1 Injection to Vacuum in Thermionic Emission.............................................................................59 4.2 Richardson–Dushman Equation..................................................................................................60 4.3 Kelvin Probe Method.................................................................................................................. 61 4.4 Photoelectron Emission Spectroscopy.........................................................................................63 4.5 Injection Barriers.........................................................................................................................66 4.6 Pinning of the Fermi Level and Charge-Neutrality Level...........................................................69 General References...............................................................................................................................73 References.............................................................................................................................................73 Chapter 5 Thermal Distribution of Electrons, Holes, and Ions in Solids............................................................... 75 5.1 Equilibration of the Electrochemical Potential of Electrons....................................................... 75 5.2 Configurational Entropy of Weakly Interacting Particles...........................................................76 5.3 Equilibrium Occupancy of Conduction Band and Valence Band States.....................................76 5.4 Equilibrium Fermi Level and the Carrier Number in Semiconductors.......................................79 5.5 Transparent Conducting Oxides.................................................................................................. 81 5.6 Hot Electrons...............................................................................................................................82 5.7 Screening.....................................................................................................................................84 5.8 The Rectifier at Forward and Reverse Voltage............................................................................85 5.9 Semiconductor Devices as Thermal Machines that Realize Useful Work..................................88 5.10 Cell Potential in the Lithium Ion Battery....................................................................................90 5.11 Insertion of Ions: The Lattice Gas Model....................................................................................94 General References...............................................................................................................................98 References.............................................................................................................................................98 Chapter 6 Interfacial Kinetics and Hopping Transitions...................................................................................... 101 6.1 Principle of Detailed Balance.................................................................................................... 101 6.2 Form of the Transition Rates.....................................................................................................104 6.3 Kinetics of Localized States: Shockley-Read-Hall Recombination Model...............................106 6.4 Reorganization Effects in Charge Transfer: The Marcus Model............................................... 107 6.5 Polaron Hopping........................................................................................................................ 112 6.6 Rate of Electrode Reaction: Butler-Volmer Equation................................................................ 115 6.6.1 Availability of Electronic Species................................................................................. 116 6.6.2 Availability of Redox Species........................................................................................ 116 6.6.3 The Kinetic Constant for Charge Transfer.................................................................... 117 6.7 Electron Transfer at Metal-Semiconductor Contact..................................................................120 6.8 Electron Transfer at the Semiconductor/Electrolyte Interface.................................................. 121 General References.............................................................................................................................126 References...........................................................................................................................................127 Chapter 7 The Chemical Capacitance.................................................................................................................. 131 7.1 Carrier Accumulation and Energy Storage in the Chemical Capacitance................................. 131 7.2 Localized Electronic States in Disordered Materials and Surface States................................. 133 7.3 Chemical Capacitance of a Single State.................................................................................... 135 7.4 Chemical Capacitance of a Broad DOS.................................................................................... 136 7.5 Filling a DOS with Carriers: The Voltage and the Conductivity.............................................. 138 7.6 Chemical Capacitance of Li Intercalation Materials................................................................. 139 7.7 Chemical Capacitance of Graphene.......................................................................................... 140 General References............................................................................................................................. 142 References........................................................................................................................................... 143 Chapter 8 The Density of States in Disordered Inorganic and Organic Conductors........................................... 145 8.1 Capacitive and Reactive Current in Cyclic Voltammetry.......................................................... 145 8.2 Kinetic Effects in CV Response................................................................................................ 149 8.3 The Exponential DOS in Amorphous Semiconductors.............................................................150 8.4 The Exponential DOS in Nanocrystalline Metal Oxides.......................................................... 152 8.5 Basic Properties of Organic Layers........................................................................................... 156 8.6 The Gaussian DOS.................................................................................................................... 160 General References............................................................................................................................. 162 References........................................................................................................................................... 163 Chapter 9 Planar and Nanostructured Semiconductor Junctions......................................................................... 167 9.1 Structure of the Schottky Barrier at a Metal/Semiconductor Contacts..................................... 167 9.2 Changes of the Schottky Barrier by the Applied Voltage.......................................................... 168 9.3 Properties of the Planar Depletion Layer.................................................................................. 170 9.4 Mott–Schottky Plots.................................................................................................................. 171 9.5 Capacitance Response of Defect Levels and Surface States..................................................... 172 9.6 Semiconductor Electrodes and the Flatband Potential.............................................................. 173 9.7 Changes of Redox Level and Band Unpinning.......................................................................... 176 9.8 Inversion and Accumulation Layer............................................................................................ 180 9.9 Heterojunctions.......................................................................................................................... 181 9.10 Effect of Voltage on Highly Doped Nanocrystalline Semiconductors...................................... 183 9.11 Homogeneous Carrier Accumulation in Low-Doped Nanocrystalline Semiconductors........... 188 General References............................................................................................................................. 192 References........................................................................................................................................... 192 PART II Foundations of Carrier Transport Chapter 10 Carrier Injection and Drift Transport.................................................................................................. 197 10.1 Transport by Drift in the Electrical Field.................................................................................. 197 10.2 Injection at Contacts.................................................................................................................. 198 10.3 The Metal-Insulator-Metal Model.............................................................................................202 10.4 The Time-of-Flight Method......................................................................................................205 General References.............................................................................................................................206 References...........................................................................................................................................206 Chapter 11 Diffusion Transport.............................................................................................................................209 11.1 Diffusion in the Random Walk Model......................................................................................209 11.2 Macroscopic Diffusion Equation............................................................................................... 211 11.3 The Diffusion Length................................................................................................................ 212 11.4 Chemical Diffusion Coefficient and the Thermodynamic Factor............................................. 213 General References............................................................................................................................. 215 References........................................................................................................................................... 215 Chapter 12 Drift-Diffusion Transport.................................................................................................................... 217 12.1 General Transport Equation in Terms of Electrochemical Potential......................................... 217 12.2 The Transport Resistance.......................................................................................................... 217 12.3 The Einstein Relation................................................................................................................ 219 12.4 Drift-Diffusion Equations..........................................................................................................220 12.5 Ambipolar Diffusion Transport................................................................................................221 12.6 Relaxation of Injected Charge..................................................................................................222 12.7 Transient Current in Insulator Layers.......................................................................................223 12.8 Modeling Transport Problems..................................................................................................224 General References.............................................................................................................................227 References...........................................................................................................................................227 Chapter 13 Transport in Disordered Media...........................................................................................................229 13.1 Multiple Trapping and Hopping Transport...............................................................................229 13.2 Transport by Hopping in a Single Level...................................................................................231 13.3 Trapping Factors in the Kinetic Constants...............................................................................233 13.4 Two-Level (Single-Trap) Model................................................................................................235 13.5 Multiple Trapping in Exponential DOS....................................................................................237 13.6 Activated Transport in a Gaussian DOS...................................................................................237 13.7 Multiple Trapping in the Time Domain....................................................................................239 13.8 Hopping Conductivity...............................................................................................................241 13.9 The Transport Energy...............................................................................................................242 13.10 Variable Range Hopping...........................................................................................................243 General References.............................................................................................................................245 References...........................................................................................................................................245 Chapter 14 Thin Film Transistors..........................................................................................................................249 14.1 Organic Thin Film Transistors.................................................................................................249 14.2 Carrier Density in the Channel.................................................................................................250 14.3 Determination of the DOS in Thin Film Transistor Configuration..........................................252 14.4 Current-Voltage Characteristics................................................................................................255 14.5 The Mobility in Disordered Semiconductors............................................................................257 14.6 Electrochemical Transistor.......................................................................................................258 General References.............................................................................................................................259 References...........................................................................................................................................259 Chapter 15 Space-Charge-Limited Transport........................................................................................................263 15.1 Space-Charge-Limited Current................................................................................................263 15.2 Injected Carrier Capacitance in SCLC.....................................................................................265 15.3 Space Charge in Double Injection............................................................................................267 General References.............................................................................................................................269 References...........................................................................................................................................269 Chapter 16 Impedance and Capacitance Spectroscopies....................................................................................... 271 16.1 Frequency Domain Measurements...........................................................................................271 16.2 Dielectric Relaxation Functions................................................................................................272 16.3 Resistance and Capacitance in Equivalent Circuit Models.......................................................274 16.4 Relaxation in Time Domain......................................................................................................279 16.5 Universal Properties of the Frequency-Dependent Conductivity..............................................281 16.6 Electrode Polarization...............................................................................................................283 General References.............................................................................................................................284 References...........................................................................................................................................284 PART III Radiation, Light, and Semiconductors Chapter 17 Blackbody Radiation and Light...........................................................................................................289 17.1 Photons and Light......................................................................................................................289 17.2 Spread and Direction of Radiation............................................................................................289 17.3 Color and Photometry................................................................................................................ 291 17.4 Blackbody Radiation.................................................................................................................293 17.5 The Planck Spectrum................................................................................................................294 17.6 The Energy Density of The Distribution of Photons in Blackbody Radiation..........................295 17.7 The Photon and Energy Fluxes in Blackbody Radiation...........................................................297 17.8 The Solar Spectrum...................................................................................................................299 General References.............................................................................................................................302 References...........................................................................................................................................302 Chapter 18 Light Absorption, Carrier Recombination, and Luminescence...........................................................305 18.1 Absorption of Incident Radiation..............................................................................................305 18.2 Luminescence and Energy Transfer..........................................................................................307 18.3 The Quantum Efficiency........................................................................................................... 310 18.4 The Recombination of Carriers in Semiconductors.................................................................. 311 18.5 Recombination Lifetime............................................................................................................ 314 General References............................................................................................................................. 316 References........................................................................................................................................... 316 Chapter 19 Optical Transitions in Organic and Inorganic Semiconductors.......................................................... 319 19.1 Light Absorption in Inorganic Solids........................................................................................ 319 19.2 Free Carrier Phenomena............................................................................................................323 19.3 Excitons.....................................................................................................................................325 19.4 Quantum Dots...........................................................................................................................328 19.5 Organic Molecules and Materials..............................................................................................330 19.6 The CT Band in Organic Blends and Heterojunctions.............................................................. 333 General References............................................................................................................................. 336 References........................................................................................................................................... 336 PART IV Photovoltaic Principles and Solar Energy Conversion Chapter 20 Fundamental Model of a Solar Cell....................................................................................................343 20.1 Majority Carrier Injection Mechanisms....................................................................................343 20.2 Majority Carrier Devices...........................................................................................................344 20.3 Minority Carrier Devices..........................................................................................................345 20.4 Fundamental Properties of a Solar Cell.....................................................................................346 20.5 Physical Properties of Selective Contacts in Solar Cells...........................................................348 General References............................................................................................................................. 351 References........................................................................................................................................... 351 Chapter 21 Recombination Current in the Semiconductor Diode......................................................................... 353 21.1 Dark Equilibrium of Absorption and Emission of Radiation.................................................... 353 21.2 Recombination Current............................................................................................................. 355 21.3 Dark Characteristics of Diode Equation.................................................................................... 356 21.4 Light-Emitting Diodes............................................................................................................... 357 21.5 Dye Sensitization and Molecular Diodes...................................................................................360 General References.............................................................................................................................363 References...........................................................................................................................................363 Chapter 22 Radiative Equilibrium in a Semiconductor.........................................................................................365 22.1 Utilization of Solar Photons......................................................................................................365 22.2 Fundamental Radiative Carrier Lifetime..................................................................................368 22.3 Radiative Emission of a Semiconductor Layer..........................................................................369 22.4 Photons at Nonzero Chemical Potential.................................................................................... 370 General References............................................................................................................................. 373 References........................................................................................................................................... 373 Chapter 23 Reciprocity Relations in Solar Cells and Fundamental Limits to the Photovoltage ........................... 375 23.1 The Reciprocity between LED and Photovoltaic Performance Parameters.............................. 375 23.2 Factors Determining the Photovoltage...................................................................................... 378 23.3 External Radiative Efficiency....................................................................................................382 23.4 Photon Recycling.......................................................................................................................383 23.5 Radiative Cooling in EL and Photoluminescence.....................................................................386 23.6 Reciprocity of Absorption and Emission in a CT Band............................................................387 General References............................................................................................................................. 391 References...........................................................................................................................................392 Chapter 24 Charge Separation and Material Limits to the Photovoltage...............................................................395 24.1 Light Absorption........................................................................................................................395 24.2 Charge Separation.....................................................................................................................395 24.3 Materials Limits to the Photovoltage.........................................................................................398 General References.............................................................................................................................403 References...........................................................................................................................................404 Chapter 25 Operation of Solar Cells and Fundamental Limits to Their Performance..........................................407 25.1 Current-Voltage Characteristics.................................................................................................407 25.2 Power Conversion Efficiency.....................................................................................................408 25.3 Analysis of FF........................................................................................................................... 410 25.4 Shockley–Queisser Efficiency Limits........................................................................................ 412 25.5 Practical Solar Cells Efficiency Limits...................................................................................... 413 General References............................................................................................................................. 419 References........................................................................................................................................... 419 Chapter 26 Charge Collection in Solar Cells......................................................................................................... 421 26.1 Introduction to Charge Collection Properties............................................................................ 421 26.2 Charge Collection Distance.......................................................................................................422 26.3 General Modeling Equations.....................................................................................................424 26.4 The Boundary Conditions.........................................................................................................425 26.4.1 Charge Extraction Boundary Condition........................................................................426 26.4.2 Blocking Boundary Condition.......................................................................................427 26.4.3 Generalized Boundary Conditions................................................................................428 26.5 A Photovoltaic Model with Diffusion and Recombination........................................................429 26.6 The Gärtner Model.................................................................................................................... 433 26.7 Diffusion-Recombination and Collection in the Space-Charge Region.................................... 435 26.8 Solar Cell Simulation................................................................................................................. 436 26.9 Classification of Solar Cells....................................................................................................... 437 26.10 Measuring and Reporting Solar Cell Efficiencies..................................................................... 439 General References.............................................................................................................................442 References...........................................................................................................................................442 Chapter 27 Spectral Harvesting and Photoelectrochemical Conversion................................................................445 27.1 Conversion of Photon Frequencies for Solar Energy Harvesting..............................................445 27.2 Tandem Solar Cells....................................................................................................................448 27.3 Solar Fuel Generation................................................................................................................450 General References.............................................................................................................................456 References...........................................................................................................................................456 Appendix................................................................................................................................................................. 459 Index........................................................................................................................................................................463
£105.00
CRC Press Photovoltaic Systems Engineering
Book SynopsisThe primary purpose of this textbook is to provide a comprehensive set of photovoltaic (PV) knowledge and understanding tools for the design, installation, commissioning, inspection and operation of PV systems. In recent years, more PV systems have been installed worldwide than any other electricity source. New, more efficient, more reliable and more cost-effective components and processes are rapidly appearing, along with continuously changing codes and standards. To keep up with the rapid changes, understanding the underlying principles is essential. In addition to practical system design and installation information, this edition includes explanations of the basic principles upon which the design and operation of PV systems are based, along with a consideration of the economic and environmental impact of the technology. Numerous design examples are presented to assist the reader in incorporating the basic principles, components, codes and standards. The book begins
£111.89
Springer Modeling of Photovoltaic Systems and RealTime
Book SynopsisIntroduction.- The Use of Matlab/Simulink for Modeling of Photovoltaic Module.- Matlab/Simulink and Experimental Studies of Shading Effect on a Photovoltaic Array.- Modelling of Novel Architecture of PV Generator Based on a-Si.- Modeling of Photovoltaic Panel using Matlab/Simulink and application of P & O Algorithm.- Modeling of a PV Panel and Application of Maximum Power Point Tracking Command based on ANN.- Conclusion.
£42.74
John Wiley & Sons Inc Indoor Photovoltaics
Book SynopsisThis is the first and most comprehensive guide on the modeling, engineering and reliable design of indoor photovoltaics which currently is the most promising and energy efficient power supply for edge nodes for the Internet of Things and other indoor devices. Indoor photovoltaics (IPV) has grown in importance over recent years. This can in part be attributed to the creation of the Internet of Things (IoT) and Artificial Intelligence (AI) along with the vast amounts of data being processed in the field, which has been a massive accelerator for this development. Moreover, since energy conservation is being imposed as the national strategy of many countries and is being set as a top priority throughout the world, understanding and promoting IPV as the most promising indoor energy harvesting source is considered by many to be essential these days. The book provides the engineer and researcher with guidelines, and presents a comprehensive overview of theoretical modeTable of ContentsPreface xi 1 Will Photovoltaics Stay Out of the Shadows? 1Joseph A. Paradiso 1.1 Introduction 1 References 6 2 Introduction to Micro Energy Harvesting 9Monika Freunek (Müller) 2.1 Introduction and History 9 2.1.1 Brief History of Electric Generators and Loads 10 2.1.2 Forms of Energies and Energy Converters 10 2.2 Kinetic Energy 11 2.2.1 Oscillating Solid Objects 12 2.2.1.1 Human Motion 13 2.2.1.2 Vibrations 13 2.2.1.3 Flow of Gas and Fluids 14 2.2.1.4 Acoustic Vibrations 15 2.2.1.5 Elastic Energy 16 2.3 Thermoelectric Conversion 16 2.4 Electrochemical Potential 18 2.5 Electromagnetic Transmission 19 2.6 Atomic Batteries 19 2.7 Challenges 20 2.8 Conclusions and Outlook 20 Acknowledgment 21 References 21 3 Introduction to Indoor Photovoltaics 25Monika Freunek (Müller) 3.1 Introduction 25 3.2 Indoor Spectra and Efficiencies 28 3.3 State of IPV Design, Issues, Approaches 31 3.4 Fields of Application 32 3.4.1 Customer and Office Applications 32 3.4.2 Ambient Assisted Living and Building Automatization 32 3.4.3 Industry, Agriculture, Horticulture, Retail, and Logistics 33 3.4.4 Relation of IPV to Outdoor Applications – Hiking, Emergency Kits 34 3.5 Degradation and Lifetime Issues 34 3.6 Conclusions and Outlook 35 References 35 4 Modeling Indoor Irradiance 39Monika Freunek (Müller) 4.1 Introduction 39 4.2 Fundamentals 40 4.2.1 Photometry and Its Impact on IPV 41 4.2.2 Comparison Measurements of Different Luxmeter Products and Settings 44 4.2.3 Conclusions for Indoor Irradiance Measurements 45 4.2.4 Available Data on Indoor Irradiance 45 4.3 Radiometric Solutions 47 4.3.1 Structure 47 4.3.2 Settings of the Studied Rooms 48 4.3.3 Investigated Installation Points 49 4.4 Analytical Model 52 4.4.1 Solar Radiation 52 4.4.2 Artifical Lighting 56 4.4.3 Interaction with Objects 60 4.4.4 Indirect Contributions of Solar Radiation 61 4.4.5 Final Results and Limits of Analytical Models 62 4.5 Simulations 62 4.5.1 Ray Tracing: Fundamental Principles 62 4.5.2 Radiance 64 4.5.3 DAYSIM 65 4.5.4 Calculation Methods and Parameters 66 4.5.5 Daylight Coefficient in DAYSIM 68 4.5.6 Environmental Parameters 69 4.5.7 Model Parameters 71 4.5.8 Results 73 4.5.9 Summary and Conclusion 85 4.6 Measurements 86 4.6.1 Available Measurement Methods 86 4.6.2 Long-Term Measurements Reference Year 89 4.6.3 Validating Simulation 94 4.6.4 Comparison Measurement Methods under Controlled Conditions 100 4.7 Discussion and Recommendation 103 4.8 Conclusion and Outlook 104 4.8.1 Autarky Factors 105 4.9 Acknowledgements 106 4.10 Symbols and Abbreviations 106 4.11 Constants 109 4.12 Abbreviations 109 Appendix 110 References 112 5 Characterization and Power Measurement of IPV Cells 115Stefan Winter 5.1 Features of IPV Compared to Outdoor PV 115 5.1.1 Irradiance 116 5.1.2 Spectrum 116 5.1.2.1 Consequences of the Different Spectra Regarding Efficiency 117 5.1.3 Incident Angle Distribution 117 5.1.4 Modulated Light Sources 117 5.1.5 Further Effects 118 5.1.6 Standardization 118 5.2 Calibration Chain and Quality Management 119 5.2.1 Basic Laboratory Measurement Methods for the Secondary Calibration of IPV Cells 119 5.3 Flexible and Precise Method for Comprehensive and Primary Calibration of IPV Devices 122 5.3.1 Lamp-Based Facility 124 5.3.2 Laser-Based Facility 124 5.4 DSR Calibration of IPV Cells 128 5.4.1 Self-Referenced IV Characteristic 129 Acknowledgment 130 References 131 6 Luminescent Solar Concentrators 133Evert P.J. Merkx and Erik van der Kolk 6.1 Introduction 134 6.2 A Crash Course in Luminescence 135 6.2.1 Luminescence in Organic Dyes 136 6.2.2 Luminescence in Rare Earth Ions 138 6.2.3 Luminescence in Quantum Dots 142 6.2.4 Hybrid Combinations 143 6.3 Principle of Operation 144 6.3.1 Absorption of Light 144 6.3.2 Emission within the LSC 145 6.3.3 Effects of Self-Absorption 146 6.3.4 Influence of the Waveguide 147 6.3.5 Conversion of Concentrated Light to Electricity 147 6.4 Calculating LSC Performance 148 6.4.1 Figures of Merit 148 6.4.2 Upper Bound for LSC Efficiency 149 6.4.3 Analytical Approach for Simple Geometries 152 6.4.4 Semi-Analytical Optimization Calculations for Arbitrary Geometries 153 6.4.5 Monte Carlo Simulations for Ray-Traced Complex Geometries 157 6.4.6 Considerations for Thin-Film LSCs 162 6.5 State-of-the-Art LSC Materials 163 6.5.1 Measures for the Visual Performance of LSC Materials 163 6.5.2 Evaluating the Performance of State-of-the-Art LSCs 165 6.5.3 Dye-Based Luminescent Solar Concentrators 167 6.5.4 Rare Earth-Based Luminescent Solar Concentrators 168 6.5.5 Quantum Dot and Doped Quantum Dot-Based Luminescent Solar Concentrators 169 6.6 Tm2+-Doped Halide Luminescent Solar Concentrators 174 6.7 LSC for an IPV Perspective 177 6.7.1 Performance Assessment 177 6.7.2 Application Examples 179 6.8 Conclusion 180 Acknowledgements 181 References 181 7 Organic Photovoltaic Cells and Modules for Applications under Indoor Lighting Conditions 189Birger Zimmermann and Uli Würfel 7.1 Introduction 190 7.2 Implications of Indoor Lighting 192 7.3 OPV Modules 198 7.4 OPV Devices and Applications 201 7.5 Acceptance and Safety Considerations 202 References 203 8 High-Efficiency Indoor Photovoltaic Energy Harvesting 213Matthias Kauer and Mathieu Bellanger 8.1 Introduction 214 8.2 Approaches for Efficient Indoor PV Energy Harvesting 216 8.2.1 PV Energy Harvesting Technologies 216 8.2.2 Commercial PV Energy Harvesting Devices 217 8.2.3 Recent Research Results for PV Energy Harvesting Devices 217 8.3 Lightricity’s PV Energy Harvesting Technology 221 8.3.1 Introduction 221 8.3.2 Energy Harvester Device Fabrication and Device Characteristics 222 8.4 High-Efficiency PV Energy Harvesting Power Supplies 225 8.4.1 Introduction 225 8.4.2 Energy Harvesting Power Management Solutions 226 8.4.3 System Integration and Performance Testing 230 8.5 Applications of Light Indoor Energy Harvesting 233 8.5.1 Watches and Wearable Devices 233 8.5.2 Wireless Building Automation Sensors 233 8.5.3 Wireless Beacons 236 8.6 Summary and Concluding Remarks 237 Acknowledgments 238 References 238 9 Indoor Photovoltaics Based on AlGaAs 241Jamie Phillips, Eunseong Moon and Alan Teran 9.1 Importance of AlGaAs for Indoor Photovoltaics 242 9.2 Design Consideration for AlGaAs III-V Photovoltaic Cells 245 9.2.1 Base/Absorber 246 9.2.2 Contact 247 9.2.3 Window 248 9.2.4 Emitter 248 9.2.5 Back Surface Field 248 9.3 Large-Area AlGaAs III-V Photovoltaics 249 9.4 Small-Area AlGaAs Photovoltaics 252 9.4.1 Model of J-V Characteristics 254 9.4.2 Performance of mm-Scale AlGaAs Photovoltaics 257 9.4.3 Dark Current Limitations 260 9.5 Monolithic GaAs PV Cell Arrays 262 9.6 Conclusion 267 References 268 Index 273
£143.06
John Wiley & Sons Inc Photovoltaic Systems Technology
Book SynopsisPHOTOVOLTAIC SYSTEMS TECHNOLOGY Discover comprehensive insights into the latest advancements in solar PV technology, including power electronics, maximum power point tracking schemes, and forecasting techniques, with a focus on improving the performance of PV systems. A huge number of research articles and books have been published in the last two decades, covering different issues of PV efficiency, circuits, and systems for power processing and their related control. Books that have been published cover one or more topics but altogether fail to give a complete picture of the different aspects of PV systems. Photovoltaic Systems Technology aims to close the gap by providing a comprehensive review of techniques/practices that are dedicated to improving the performance of PV systems. The book is divided into three parts: the first part is dedicated to advancements in power electronic converters for PV systems; tools and techniques for maximum power point tracking of PV systems will be
£140.40
Taylor & Francis Ltd Planning and Installing Photovoltaic Systems: A
Book SynopsisNew third edition of the bestselling manual from the German Solar Energy Society (DGS), showing you the essential steps to plan and install a solar photovoltaic system. With a global focus, it has been updated to include sections on new technology and concepts, new legislation and the current PV market.Updates cover: new developments in inverter and module technology market situation worldwide and outlook integration to the grid (voltage stabilization, frequency, remote control) new legal requirements for installation and planning operational costs for dismantling and recycling feed-in management new requirements for fire protection new requirements in Europe for electric waste (Waste Electrical and Electronic Equipment, WEEE) and the restriction of the use of certain hazardous substances (RoHS). Also providing information on current developments in system design, economic analysis, operation and maintenance of PV systems, as well as new software tools, hybrid and tracking systems.An essential manual for installers, engineers and architects, it details every subject necessary for successful project implementation, from the technical design to the legal and marketing issues of PV installation. Trade ReviewReviews for previous edition:"The most up-to-date and comprehensive guide to solar photovoltaic systems." – Permaculture Magazine "A mine of useful practical information designed to help those involved with installing PV systems." – Renew MagazineTable of ContentsForeword 1. Photovoltaic Basics 2. PV Modules and Other Components of Grid-Connected Systems 3. Site Surveys and Shading Analysis 4. Planning and Sizing Grid-Connected Photovoltaic Systems 5. System Sizing, Design and Simulation Software 6. Mounting Systems and Building Integration 7. Installing, Commissioning and Operating Grid-Connected Photovoltaic Systems 8. Stand-alone Photovoltaic Systems 9. Economics and Environmental Issues 10. Marketing and Promotion Bibliography. Index.
£200.00
Taylor & Francis Inc Photovoltaic Laboratory
Book SynopsisPhotovoltaic Laboratory: Safety, Code-Compliance, and Commercial Off-the-Shelf Equipment is the only textbook that offers students the opportunity to design, build, test, and troubleshoot practical PV systems based on commercially available equipment. Complete with electrical schematics, layouts, and step-by-step installation instructions, this hands-on laboratory manual: Promotes safety first by covering working in extreme weather conditions, personal protective equipment, working at heights, electrical safety, and power tool safety Includes chapters on trade math, DC/AC electrical circuits, and assessing a property for a photovoltaic system (e.g., surveying the available space, shading, and solar harvest) Discusses aspects of mechanical and electric integration specific to different roof types, and characterizing a PV module under different levels of irradiation and ambient temperature Addresses the design, installation, and testing of ofTrade Review "This book helps fill a shortage in modern support material for technical education and training for the rapidly growing photovoltaics systems industry. It is particularly appropriate for the very active US market, since aspects such as regulation and roof structure are regionally specific and some units of measurement in the book are used only in the US and a few other locations, but there is much here to learn for trainee technical staff all over the world. The style is appropriately informal and anecdotal for the technical education levels at which it is directed. The pedagogical concern and experience of the author is evident, for example, in a focus on understanding the principles through simpler tools than the excellent SunEye, for shading analysis."—Richard Corkish, School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, Australia "The approach [of this book] is good. Making sure the students know enough math and electrical theory is essential if they are to understand the subsequent material. The emphasis on safety is very important and putting it up front makes that point. I like the fact that the book provides material for other important photovoltaic (PV) activity, since if a system is not sold, then it will not be installed."—Roger Messenger, Florida Atlantic University, Boca Raton, Florida, USA "The material is written in easy-to-understand layman’s terms while focusing on multiple career areas. I believe this allows instructors the ability to draw from the material what they need in order to provide effective training for the specific career(s) that they may be instructing students for. The materials are written in a simplistic format that should allow students to easily follow the materials while working on the labs. I believe that having the sections on safety and related mathematics is integral to producing successful students. Many of the texts that I have reviewed/used do not have these components and present materials with the assumption that either instructors will automatically cover these materials or that students come to the class with this knowledge already in place. … [This is] a very well-written book that can be integrated into most solar PV training applications. It covers concepts in a well-thought-out manner that follows a logical progression that builds on basics and works upward from there. This logical progression should allow students to easily and successfully progress through the concepts being presented."—Daniel M. Sherry, Alamo Colleges, St. Philip’s College, San Antonio, Texas, USA "Overall, this is a good book on the laboratory component of photovoltaics. It contains safety, handling, and measurement procedures for photovoltaic (PV) experiments. ... The exercises and PV content are good and well described. Several simulation programs are included."—Tapas Kumar Mallick, Environment & Sustainability Institute, University of Exeter, Penryn Campus, UK "This book is interesting and useful, as it covers aspects of solar cells work that is not usually covered in other textbooks. The information provided is very practical and would be useful for a wide range of personnel involved in solar cells installation and design."—Yeng Ming Lam, Nanyang Technological University, Singapore "This is a practical book on understanding and installing photovoltaic (PV) systems for residential applications. It clearly explains how to install rooftop PV systems, and provides a well-balanced blend of practice and theory with explanations on how a PV cell works, how the system operates, cell physics, and the details of mechanical and electrical integration…Anyone interested in learning about the practical aspects of PV arrays, and what is needed to install them, will be able to make use of this book to help guide them on proper installation and making good choices when designing a PV system. Others who may also find this book useful include system designers, marketing and sales people, and even those involved in issuing permits for PV systems."—John Shea, IEEE Electrical Insulation Magazine, May/June 2017 Issue "This book helps fill a shortage in modern support material for technical education and training for the rapidly growing photovoltaics systems industry. It is particularly appropriate for the very active US market, since aspects such as regulation and roof structure are regionally specific and some units of measurement in the book are used only in the US and a few other locations, but there is much here to learn for trainee technical staff all over the world. The style is appropriately informal and anecdotal for the technical education levels at which it is directed. The pedagogical concern and experience of the author is evident, for example, in a focus on understanding the principles through simpler tools than the excellent SunEye, for shading analysis."—Richard Corkish, School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, Australia "The approach [of this book] is good. Making sure the students know enough math and electrical theory is essential if they are to understand the subsequent material. The emphasis on safety is very important and putting it up front makes that point. I like the fact that the book provides material for other important photovoltaic (PV) activity, since if a system is not sold, then it will not be installed."—Roger Messenger, Florida Atlantic University, Boca Raton, Florida, USA "The material is written in easy-to-understand layman’s terms while focusing on multiple career areas. I believe this allows instructors the ability to draw from the material what they need in order to provide effective training for the specific career(s) that they may be instructing students for. The materials are written in a simplistic format that should allow students to easily follow the materials while working on the labs. I believe that having the sections on safety and related mathematics is integral to producing successful students. Many of the texts that I have reviewed/used do not have these components and present materials with the assumption that either instructors will automatically cover these materials or that students come to the class with this knowledge already in place. … [This is] a very well-written book that can be integrated into most solar PV training applications. It covers concepts in a well-thought-out manner that follows a logical progression that builds on basics and works upward from there. This logical progression should allow students to easily and successfully progress through the concepts being presented."—Daniel M. Sherry, Alamo Colleges, St. Philip’s College, San Antonio, Texas, USA "Overall, this is a good book on the laboratory component of photovoltaics. It contains safety, handling, and measurement procedures for photovoltaic (PV) experiments. ... The exercises and PV content are good and well described. Several simulation programs are included."—Tapas Kumar Mallick, Environment and Sustainability Institute, University of Exeter, Penryn Campus, UK "This book is interesting and useful, as it covers aspects of solar cells work that is not usually covered in other textbooks. The information provided is very practical and would be useful for a wide range of personnel involved in solar cells installation and design."—Yeng Ming Lam, Nanyang Technological University, Singapore "This is a practical book on understanding and installing photovoltaic (PV) systems for residential applications. It clearly explains how to install rooftop PV systems, and provides a well-balanced blend of practice and theory with explanations on how a PV cell works, how the system operates, cell physics, and the details of mechanical and electrical integration…Anyone interested in learning about the practical aspects of PV arrays, and what is needed to install them, will be able to make use of this book to help guide them on proper installation and making good choices when designing a PV system. Others who may also find this book useful include system designers, marketing and sales people, and even those involved in issuing permits for PV systems."—John Shea, IEEE Electrical Insulation Magazine, May/June 2017 Issue Table of Contents Preface Acknowledgments Introduction How to Use This Textbook The Author 1 Safety 2 Trade Math for PV—Measurements, Units, and Calculations 3 Measurements of DC and AC Electrical Circuits 4 The Site Survey 5 Racking Systems—General Considerations 6 Characterization of a PV Module 7 Modeling the PV Cell, Module, and Array 8 Lead-Acid Absorbent Glass Mat Batteries 9 Off-Grid PV System with DC-Only Loads 10 Off-Grid PV System with DC and AC Loads 11 2.4 kW DC Grid-Tied PV System with Microinverters 12 2.4 kW DC Grid-Tied PV System with String Inverter Appendix I: Small Mock Roofs Appendix II: Roll-Around Walls Appendix III: 21 ft. by 18 ft. Roof
£86.99
Taylor & Francis Ltd Photovoltaic System Design
Book SynopsisIntroducing a Reliable Green Technology That Can Help Improve System PerformanceSolely centered on photovoltaic (PV) system sizing and the tools used for PV system analysis and design, Photovoltaic System Design: Procedures, Tools and Applications emphasizes the importance of using solar PV technologies for a number of end-use applications, and examines growing interest in solar PV-based projects on a global scale. Written for the system designer/project developer/manufacturer dedicated to correctly sizing a PV system, the book outlines various aspects of PV technology, applications, and programs. It describes key attributes, system design requirements, influence on climatic and site-specific parameters, utilization of simulation procedures, and expected performance. The author includes actual case studies for system designing procedures adopted by various companies and provides a framework for working through both direct and indirecTable of ContentsRole of Renewable Energy Technologies in the Overall Energy Scenario at a Global Level. Off-Grid and On-Grid PV Applications. Solar Radiation Availability on Earth. On-Site-Specific Considerations. PV System Design Considerations. Introduction to PV System Sizing Procedures via Simulation Software. Real-Time Application of PV Simulation Software. Capacity-Building Initiatives for Simulation Software Outreach. References.
£45.99
Institution of Engineering and Technology Agrivoltaics
Book SynopsisAgrivoltaics, also called agricultural-photovoltaics (Agri-PV or APV), integrates solar power generation into an agricultural activity on farmland.The PV modules not only generate clean energy, but also shield crops from intense sun, drought or wind erosion. The market potential in EU-27, UK, and Switzerland alone is estimated to be 968 GWp if only 1 % of the utilized agricultural area is used for Agri-PV. Interest is swiftly growing amongst scientists, policy makers, and within the farming and energy industries. The challenges lie in the construction of the PV system, choice and ecology of crops, and sowing and harvesting techniques.Agrivoltaics: Technical, ecological, commercial and legal aspects provides an overview of agrivoltaics, covering existing technical solutions both on system level as well as on the module level. Chapters cover the principles and definition, technological aspects of the PV and the agricultural system, yield prediction, light management, operations and management, ecological and social aspects, commercial, and legal considerations. Legal frameworks in different countries are explained. A short outlook describes how the future of Agri-PV could develop.The book provides systematic coverage of this emerging topic for researchers, scientists, and engineers involved with PV, farmers, decision makers in PV and agricultural sector, as well as policy makers.
£118.75
Springer-Verlag Berlin and Heidelberg GmbH & Co. KG Advances in Solar Photovoltaic Power Plants
Book SynopsisThis book focuses on the latest research and developments in photovoltaic (PV) power plants, and provides extensive coverage of fundamental theories, current research and developmental activities, and new approaches intended to overcome a number of critical limitations in today’s grid integration technologies. The design and implementation process for large-scale solar PV power plants is introduced. The content provided will actively support the development of future renewable power plants and smart grid applications.The book will be of interest to researchers, professionals and graduate students in electrical and electronics fields seeking to understand the related technologies involved in PV power plants.Table of ContentsIntroduction.- Photovoltaic Inverter Topologies for Grid Integration Applications.- Advanced Control Techniques for PV Maximum Power Point Tracking.- Maximum Power Point Tracking Methods for PV Systems.- Multiple Peaks Tracking for Photovoltaic System Tracking using Particle Swarm Optimization with Artificial Neural Network Algorithm.- Empirical based approach for prediction of global irradiance and energy for solar photovoltaic systems.- A Study of Islanding Mode Control in Grid-connected Photovoltaic Systems.- Stability Assessment of Power Systems Integrated with Large-Scale Solar PV Units.- Energy Storage Technologies for Solar Photovoltaic Systems.
£125.99
John Wiley & Sons Inc Technology Manufacturing and Grid Connection of
Book SynopsisA unique guide to the most important technical aspects of photovoltaic power generation with comprehensive analysis and author industry-experience Unique from other books in the area in that it explains profound theories in simple language, introduces widely used production equipment and processes for industry professionals, and explains the complete PV industry chain from material to power generationHas originated from the author's practical industry experience, enabling the use of up-to-date information during this time of new development in the Chinese PV industryContent includes approximately 255 illustrations and 46 tables to help clarify complex theories.Table of ContentsAbout the Author xv Preface xvii 1 Basic Physics of Solar Cells 1 1.1 Development of Solar Cells 1 1.1.1 Solar Energy Is the Most Promising Renewable Energy Source in the World 1 1.1.2 Development of Solar Cells 4 1.2 Solar Radiation and Air Mass 6 1.2.1 Conversion of Sunlight Into Electricity Using Photoelectric Effect Is an ImportantWay to Make Use of Solar Energy 6 1.2.2 Basics of Solar Radiation and Definition of Air Mass 6 1.2.3 Wavelength of Solar Radiation 7 1.3 Basics of Semiconductors 8 1.3.1 Communisation Motion of Electrons in a Crystalline and Formation of Energy Bands 9 1.3.2 Atomic Structures of Conductors, Insulators and Semiconductors and Energy Bands Image 9 1.3.3 Energy Band Structure of Dope Semiconductor 10 1.3.4 Fermi Level 11 1.3.5 DirectionalMovement of Electrons and Holes 12 1.3.6 Generation and Recombination of Carriers 13 1.4 Light Absorption of Semiconductor Materials 14 1.4.1 Light Absorption of Semiconductor 14 1.4.2 Intrinsic and Non-Intrinsic Absorptions of Semiconductor Materials 15 1.4.3 Light Absorption Coefficient and Semiconductor Materials of Direct/Indirect Transition 16 1.5 P-N Junctions and PV Effect of Solar Cells 18 1.5.1 Bending of a P-N Junction Band and Formation of a Built-In Field 18 1.5.2 Effect of an External Voltage on the P-N Junction Band Structure 20 1.5.3 Effect of Solar Radiation on a P-N Junction’s Band Structure and the PV Effect 20 1.5.4 Composition of the Photo-Generated Current in the Solar Cell 22 1.5.5 Key Parameters of the Solar Cell 24 1.5.5.1 I-V Characteristic Curve of a Solar Cell 24 1.5.5.2 Relations of the Open-Circuit Voltage and the Height of the P-N Junction Potential Barrier in a Solar Cell 24 1.5.5.3 Short-Circuit Current of a Solar Cell Isc 24 1.5.5.4 The Optimum Operation Point of Solar Cells, the Optimum Operation Voltage and Current 25 1.5.5.5 Filling Factor (FF) 26 1.5.5.6 Power Conversion Efficiency of a Solar Cell η 26 1.5.5.7 Temperature Characteristics of a Solar Cell 27 1.5.6 Application of a Concentration Junction in a PV Cell for Back Surface Field (BSF) 27 1.5.7 Basic Structure of Homogeneous P-N Junction Crystalline Silicon Solar Cells and Analysis on the Cell’s Efficiency 29 1.6 Solar Cells of Heterojunctions 32 1.6.1 Composition of Heterojunctions 32 1.6.2 Construction andWorking Principle of the Solar Cell with Heterojunctions 32 2 Materials of Solar Cells 35 2.1 Low-Cost Solar-Grade Polycrystalline Silicon 35 2.1.1 Polycrystalline Silicon—The Most Important Raw Material of the PV Industry 35 2.1.2 Meaning of Solar-Grade Polycrystalline Silicon 38 2.1.3 Preparation of Solar-Grade Polycrystalline Silicon (UMG Silicon) by MetallurgicalMethod 41 2.1.4 Preparation of Solar-Grade Polycrystalline Silicon by FBR Method 45 2.1.5 Preparation of Solar-Grade Polycrystalline Silicon by SiCl4 Zinc Reduction Method 45 2.1.6 Preparation of Solar-Grade Granular Polycrystalline Silicon by VLD Method 47 2.1.7 Hydrogenation of the Main By-Product SiCl4 Produced in the Production Process of Polycrystalline Silicon by the SiemensMethod 48 2.2 Casting Polycrystalline Silicon 49 2.2.1 General 49 2.2.2 Preparation Process of Casting Crystalline Silicon 50 2.2.3 Impurities and Defects in Casting Crystalline Silicon 54 2.2.3.1 Non-Metal Impurities in Casting Crystalline Silicon 54 2.2.3.2 Metal Impurities and Gettering in Casting Crystalline Silicon 56 2.2.3.3 Crystal Boundaries and Dislocations in Casting Crystalline Silicon 57 2.2.4 Latest Development of Casting Crystalline Silicon andWafers 58 2.2.4.1 Casting of Pseudo-Single Crystal 58 2.2.4.2 Continuous Output Improvement of Casting Crystalline Silicon Furnaces 59 2.3 CZ Monocrystalline Silicon 60 2.3.1 Heat Flow Continuity Equation of Grain Growth Interface and its Application 60 2.3.2 Heat Conduction in the Melt 62 2.3.3 Temperature Distribution in the Crystal 63 2.3.4 Impurity Segregation Between Solid and Liquid 64 2.4 Nature of a-Si/μC-SiThin Film 66 2.4.1 Nature of a-SiThin Film 66 2.4.1.1 Basic Nature of a-Si Thin Film and its Application to PV Sector 67 2.4.1.2 Fermi Level Pinning and Efficiency DegradationMechanism for a-Si Thin-film Cells 69 2.4.2 Nature of μC-SiThin Film 70 2.5 PreparationMethods of a-Si/μC-Si Film 72 2.5.1 A Main Raw Material for Silicon Film Preparation—Silane 72 2.5.2 Introduction to Silicon Thin-film Growth Methods 74 2.5.3 Preparation of a-Si/μC-SiThin Film by PECVD Method 74 2.5.4 Preparation of a-Si/μC-SiThin Film by HWCVD Method 75 2.5.5 Growing SiliconThin Film by Other Methods 76 2.5.5.1 Direct Preparation of μC-SiThin Film by LPCVD Technique 76 2.5.5.2 a-Si Crystallised to Polycrystalline SiliconThin Film by SPC Technique 77 2.5.5.3 a-Si Crystallised to Polycrystalline SiliconThin Film by Metal-Induced Method 77 2.5.5.4 a-Si Crystallised to Polycrystalline SiliconThin Film by RTP Technique 77 2.5.5.5 a-Si Crystallised to Polycrystalline SiliconThin Film by Linear Laser Technique 78 2.5.6 Comparisons of Various Silicon Film Growth Methods 78 2.6 Compound Semiconductor Materials 79 2.6.1 GaAs and Other Semiconductor Materials 79 2.6.2 CdTe and CdSThin Film Materials 80 2.6.3 CuInSe2 and CuInS2 Thin Film Materials 80 2.7 Analysis on Impurities in Semiconductor Materials 81 2.7.1 Glow Discharge Mass Spectrometry (GDMS) Analysis 81 2.7.2 Secondary Ion Mass Spectrometry (SIMS) Analysis 82 2.7.3 Infrared Spectroscopy to Detect the Carbon and Oxygen Contents in SiliconWafer 84 3 Preparation Methods of Crystalline Silicon Solar Cells 85 3.1 Preparation Process Flow of CSSCs 85 3.1.1 Basic Structure of CSSCs 85 3.1.2 Production Flow of CSSCs 87 3.2 Performance Detection and Sorting of Raw SiliconWafer 88 3.2.1 Measurement of SiliconWafer Conduction Type 88 3.2.2 Measurement of SiliconWafer Resistivity and Thin Layer Square Resistance 89 3.2.3 Measurement of the Minority Carrier Lifetime 90 3.2.4 Measurement of SiliconWafer Thickness 92 3.2.5 High-Speed Multi-Purpose SiliconWafer Testers 92 3.3 SiliconWafer Surface Cleaning and Texturing 93 3.3.1 Principles of Chemical Cleaning and Texturing 93 3.3.2 Production Equipment and Process of Chemical Corrosion Texturing 94 3.3.3 Laser Texturing and Reactive Ion Etching (RIE) Techniques 95 3.3.3.1 Laser Texturing 97 3.3.3.2 RIE 98 3.4 Junction Preparation by Diffusion 99 3.4.1 Principles 99 3.4.2 Process and Equipment 100 3.4.2.1 Gaseous Diffusion of POCl3 in Tubular Furnace 100 3.4.2.2 Dilute Phosphoric Acid Doper and Chain-Type Diffusion Furnace 102 3.4.3 Measurement of Diffusion LayerThickness (Junction Depth) 103 3.4.3.1 Measurement of the Longitudinal Distribution of the Phosphorus Concentration on the Diffusion Layer by SIMS Method 103 3.4.3.2 Measurement of PN Junction Depth by SRP 103 3.4.4 CSSC Phosphorus Impurity Gettering 104 3.5 Plasma Corrosion and Laser Edging Isolation 106 3.5.1 Objectives and Means of Edging Isolation 106 3.5.2 Principles and Equipment of Plasma Etching 107 3.5.3 Laser Edging Isolation 109 3.6 Removal of PSG 110 3.6.1 Principles and Processes of PSG Removal 110 3.6.2 Equipment and Production Line for PSG Removal 111 3.6.2.1 Bath-Type PSG-Removal Integrated Production System 111 3.6.2.2 Chain-Type PSG-Removal Production System 112 3.7 Preparation of Anti-Reflection Coating by PECVD and PVD Methods 112 3.7.1 Objectives and Principles for Anti-Reflection Coating Preparation 112 3.7.2 Principles of Silicon Nitride Coating Prepared by PECVD 113 3.7.3 Direct (Tubular) PECVD and Indirect (Plate-Type) PECVD 115 3.7.4 Typical PECVD Systems 117 3.7.4.1 Tubular Direct PECVD System 117 3.7.4.2 Plate-Type Direct PECVD System 117 3.7.4.3 Plate-Type Indirect PECVD System 118 3.7.5 Preparation of Silicon Nitride Coating by Physical Vapour Deposition (PVD) 119 3.7.5.1 Principles of Silicon Nitride Coating Prepared by PVD 119 3.7.5.2 Comparisons of Silicon Nitride Coating Deposited by PVD and PECVD 121 3.7.5.3 ATON Sputtering System Produced by Applied Materials, USA 122 3.7.6 Measurement of theThickness and Refractive Index of the Anti-Reflection Coating by Ellipsometer 122 3.8 Preparation of Top/Bottom Electrodes (Surface Metallisation) 123 3.8.1 Technical Requirements and Production Flow for Top/Bottom Electrode Preparation 123 3.8.2 Electrode Printing, Drying, Testing and Cell sorting 125 3.8.3 Fast Sintering Furnace System 126 3.8.4 Electrode Slurry 128 3.8.5 Aluminum Impurity Gettering 130 3.9 Cell Testing and Sorting 130 3.9.1 Objectives of Solar Cell Testing and Sorting 130 3.9.2 Cell-sorting Equipment 130 3.10 Automation of CSSC Production Techniques 133 3.10.1 Promotion of Cascading/Chain-Type Production Lines 133 3.10.2 Mounting/Dismounting the SiliconWafer by Robots Instead of Manual Operation 133 3.11 ParameterMeasurement in CSSC Production Process 136 3.11.1 Solar Simulator 136 3.11.2 Measurement of V-I Characteristics and PV Conversion Efficiency for Solar Cells 136 3.11.3 Measurement of Spectral Response for Solar Cells 139 3.12 Product Quality Control and Cost Analysis for Solar Cell Production Lines 140 3.12.1 On-line Inspection of Solar Cell Production 140 3.12.2 Traditional Process Quality Control on the Solar Cell Production Line 140 3.12.2.1 Working Environment 140 3.12.2.2 Quality Control of the Cleaning and Texturing Process 140 3.12.2.3 Quality Control of Diffusion Process 141 3.12.2.4 Quality Control inWafer Edging Isolation and PSG Removal Procedures 141 3.12.2.5 Quality Control in PECVD Procedure 141 3.12.2.6 Quality Control in Print and Sintering Procedures 141 3.12.3 Cost Analysis for CSSCs 142 4 Preparation Methods of Thin Film Silicon Solar Cells 143 4.1 Advantages and Prospects of TFSSCs 143 4.1.1 Advantages of TFSSCs 143 4.1.2 History and Prospects of TFSSCs 144 4.2 Structures and Power Generation Principles of TFSSCs 146 4.2.1 Structures of a-Si:H and μC-Si THSCs 146 4.2.2 Power Generation Principle of TFSSCs 147 4.2.3 Light Absorption of a-SiC:H/μC-Si and a-Si:H/a-SiGe:H Stacked Solar Cells 150 4.3 Preparation Techniques of TFSSCs 151 4.3.1 TCO Sputtered on Glass Substrate 151 4.3.2 P-Type (a-SiC:H) Film Deposited by PECVD Method 152 4.3.3 I (a-Si:H) Intrinsic Zone Deposited by PECVD Method 152 4.3.4 N-Type (a-Si:H) Layer Thin Film Deposited by PECVD Method 154 4.3.5 Al(Ag) Back Electrodes Sputtered by PVD Method 154 4.3.6 Integration of TFSCs and Modules 154 4.4 Main Production Equipment for TFSSCs 155 4.4.1 Production System of TFSSCs 155 4.4.2 Glass Cleaning and Surface Texturing Equipment 158 4.4.3 TCO Sputtering Equipment and ZAO Target 158 4.4.4 PECVD System forThin Film Silicon Deposition 160 4.4.5 Back Contact Sputtering Equipment 163 4.4.6 Laser Scriber 164 4.4.7 Testing Equipment 165 4.5 Discussion on Some Issues Concerning TFSSC Preparation 166 4.5.1 Performance, Preparation and Testing of TCO 166 4.5.2 Influence of PECVD Process Parameters on Deposition and Crystallisation Rates of Silicon Thin Film 167 4.5.2.1 Hydrogen Dilution 167 4.5.2.2 Gas Pressure 167 4.5.2.3 Deposition Temperature 168 4.5.2.4 Distance Between the Electrode and the Substrate 168 4.5.2.5 Power Excited by Plasma 169 4.5.2.6 Frequency Excited by Plasma 169 4.5.3 VHF-PECVD Method to Deposit Silicon Film 169 4.5.4 HWCVD Method to Deposit Silicon Film 170 4.6 Adjustment of TFSSC Energy Band Structure 171 4.6.1 Methods to Adjust the Band Gap of Thin Film Silicon 171 4.6.1.1 Significance of Energy Band Structure Adjustment for TFSSCs 171 4.6.1.2 Gap Adjustment by a-Si Hydrogen Content and Deposition Temperature 172 4.6.1.3 a-SiC Carbon Material toWiden the Gap 172 4.6.1.4 a-Si Ge Material to Narrow Down the Gap 172 4.6.2 a-SiGe TFSCs 172 4.6.3 Boron, Phosphorous and Hydrogen in a-Si Film 175 4.7 Physical Principle of PECVD and Deposition of SiliconThin Film 175 4.7.1 Glow Discharge and Plasma Generation 175 4.7.2 Mechanism on a-Si Thin Film Grown by PECVD Method 177 4.7.2.1 Basic Principles of PECVD 177 4.7.2.2 a-Si:H (a-Si-Containing Hydrogen) Deposited by PECVD Method 178 4.7.2.3 Growth Mechanism 179 4.8 Physical Sputtering Principles and TCO and Back Metal Preparation System 179 4.8.1 Overview on TCO and Back Metal Deposited by Physical Sputtering 179 4.8.2 A Simple Parallel Metal DC Diode Sputtering System 182 4.8.3 RF and MC Sputtering Systems 183 5 High-Efficiency Silicon Solar Cells and Non-Silicon-Based New Solar Cells 187 5.1 High-Efficiency Crystalline Silicon Solar Cells (CSSCs) 187 5.1.1 Selective Emitters and Buried Contact Silicon Solar Cells 188 5.1.2 Passivation Emitter Silicon Solar Cells 190 5.1.3 Back Finger Electrodes and Boron Diffusion N-Type Crystalline Silicon (IBC) Solar Cells 192 5.1.4 MetallisationWrap-Through (MWT) Silicon Solar Cells 193 5.2 Production Techniques of HIT High-Efficiency Solar Cells 196 5.2.1 a-Si/Monocrystalline Silicon Heterojunctions with Intrinsic Layer 196 5.2.2 Structure and Techniques of Double-Surface HIT Cells 196 5.2.3 Characteristics of HIT Cells 197 5.3 Compound Semiconductor Solar Cells 197 5.3.1 Fabrication Methods of Compound Solar Cells 197 5.3.1.1 Vacuum Evaporation Technique 197 5.3.1.2 Liquid Phase Epitaxy (LPE) Technique 198 5.3.1.3 Metal Organic Chemical Vapour Deposition (MOCVD) Technique 198 5.3.1.4 Molecular Beam Epitaxy (MBE) 198 5.3.2 III–V Compound Multi-Junction Crystalline Solar Cells 199 5.3.3 Cadmium Telluride (CdTe) TFSCs 201 5.3.4 CIGS TFSCs 204 5.3.4.1 Vacuum Co-Evaporation and Vacuum-Sputtering Methods 205 5.3.4.2 Non-Vacuum Method 207 5.3.4.3 Roll to Roll Method 209 5.4 Next-Generation Solar Cells 210 5.4.1 Organic Solar Cells 210 5.4.2 Dye-Sensitised Solar Cells 213 5.4.3 Perovskite Solar Cells 215 5.4.4 Concentrator Solar Cells 217 5.4.5 Multiple QuantumWell (MQW) Solar Cells 219 6 Modules and Arrays of Solar Cells 223 6.1 General 223 6.1.1 Modules and Arrays of Solar Cells 223 6.1.2 Packaging Techniques of Several Solar Cell Modules 224 6.1.3 Packaging Structure of Flat Plate Solar Cell Modules 224 6.1.4 Solar Cell Modules for Building Integrated PV (BIPV) 225 6.1.5 Double-Sided Cells and Modules 228 6.2 Module Packaging Materials 229 6.2.1 Inspection and Sorting of CellWafers 230 6.2.2 Upper Cover Glass 231 6.2.3 Adhesives and Modified EVA Film 232 6.2.4 Back Plate and Localisation 233 6.2.5 Frameworks and Junction Boxes and Other Materials 235 6.3 Module Packaging Techniques 237 6.4 Module Packaging System 239 6.4.1 Main Equipment in the Production Line of Solar Cell Modules 239 6.4.2 Laser Scribers 240 6.4.3 CellWelders 240 6.4.4 Solar Cell Module Laminators 242 6.4.5 Solar Simulators, Turnover Trolleys and Frame Machines 242 6.5 Reliability of Solar Cell Modules and Inspection After Packaging 242 6.5.1 Module Packaging and PV System Reliability 242 6.5.2 Objectives and Descriptions of Solar Cell and Module Tests 244 6.5.2.1 Indoor Tests of PV Cells 245 6.5.2.2 Indoor Tests of PV Modules 245 6.5.2.3 Outdoor Tests of PV Modules 245 6.5.3 Testing Methods and Verification Standards of Solar Cell Modules 246 6.5.4 Tests of PV Performance and Macro Defects of Solar Cell Modules 247 6.5.4.1 Tests of PV Performance of Solar Cell Modules 247 6.5.4.2 Tests of Macro Defects of Solar Cells and the Modules 247 6.5.4.3 Testing Principles of Electroluminescence 249 6.6 Efficiency, Common Specifications and Market Development Trend of Solar Cell Modules 250 6.6.1 Estimates of Solar Cell Module Power and Efficiency 250 6.6.2 Common Specifications in the Solar Cell Module Market 252 6.6.3 Attenuation of Solar Cell Module Power During Usage 253 6.6.4 Development Trend of Solar Cell Modules in China 253 6.7 Solar Cell Arrays 254 6.7.1 Design of Solar Cell Arrays 254 6.7.2 Array Electrical Connections and Hot Spot Effect 255 6.7.3 Installation and Measurement of Arrays 256 7 PV Systems and Grid-Connected Technologies 259 7.1 Overview on the PV System 259 7.1.1 Characteristics, Classifications and Compositions of the PV System 259 7.1.2 Composition and SimpleWorking Principles of the PV System 263 7.2 Energy Storage Batteries 265 7.2.1 Energy Storage Batteries andTheir Application to PV System 265 7.2.2 Lead-Acid Batteries 266 7.2.3 Lithium Ion Batteries 268 7.2.4 Liquid Flow Energy Storage Batteries 269 7.2.4.1 Sodium-Sulphur Batteries 269 7.2.4.2 Vanadium Redox Batteries 270 7.2.4.3 Zinc-Bromine Flow Batteries 270 7.2.5 Super Capacitors 271 7.2.6 Fuel Cells 272 7.2.6.1 General 272 7.2.7 Capacity Design of Battery Packs 274 7.3 Core of the Inverter—Power-Switching Devices 275 7.3.1 MOSFET and IGBT and Other Power Electronic Power-Switching Devices 275 7.3.2 Structure andWorking Principles of IGBT 275 7.3.3 Development History of IGBT 278 7.3.3.1 Trench Gate Technology 278 7.3.3.2 Non-Punch-Through (NPT) Technique 278 7.3.3.3 Filed Stop (FS) Technology 279 7.4 Inverters 281 7.4.1 Role of the Inverter in the PV System 281 7.4.2 Working Principles of the Inverter 282 7.4.3 Control of the Inverter 285 7.4.4 Inverter Circuit and Inverter Types 285 7.4.5 Selection and Requirements of Inverters for PV Applications 286 7.5 Controllers: Module Power Optimisation and IntelligentMonitoring 287 7.5.1 Functions of the PV System Controllers 287 7.5.2 Maximum Power Point Tracking Technology (MPPT) of Solar Cell Controllers 289 7.5.3 Installation Angle and Position Regulation of Solar Cell Arrays by the Controller 291 7.5.4 Other Functions of the Controller 293 7.6 Applications of PV Systems 294 7.6.1 Classifications of PV Systems 294 7.6.2 Application Type, Size and Load Types of the PV System 294 7.6.2.1 Small-Power DC PV Systems 294 7.6.2.2 DC Power Supply Systems Required of Controllers 295 7.6.2.3 AC/DC Power Supply Systems Required of Inverters 295 7.6.2.4 Small-/Medium-Sized Distributed PV Systems with the Grid-Connected Inverter 296 7.6.2.5 Large-Sized Centralised Grid-Connected PV Stations 296 7.6.2.6 Hybrid Power System 297 7.6.3 Energy Storage Device Charging/Discharging by Small-/Medium-Sized PV Systems 298 7.7 BIPV and Distributed PV Stations 299 7.7.1 BIPV 299 7.7.2 Design Principles of BIPV Grid-Connected Power Systems 301 7.7.3 National Policies and Certification of BIPV in China 301 7.7.4 Encouragement of Distributed PV Stations by the Chinese Government 301 7.8 Grid-Connected PV Systems and Intelligent Grids 302 7.8.1 Grid-Connected PV Systems 302 7.8.2 Technical Specifications of the Grid on the Grid-Connected PV System 303 7.8.3 Significance of the Intelligent Grid on PV Power and Other New Energy Utilisation 305 7.8.4 Development of China’s PV Industry in the Past 10 Years and Its Outlook 307 7.9 Codes and Test Verifications of the PV System 309 7.9.1 Necessity and Main Contents of PV Product Certification 309 7.9.2 TUV Certification Oriented to the European Market 311 7.9.3 UL Certification Oriented to the U.S. and Canadian Market 311 7.9.4 Certification of PV Products in China 313 Bibliography 319 Index 321
£108.86
Springer Vieweg Photovoltaik Engineering
Book SynopsisEinführung.- Solares Strahlungsangebot.- Solargenerator.- Komponenten von PV-Systemen.- Dimensionierung von PV-Inselanlagen.- Energieversorgung mit PV-Anlagen.- Energie-Ertragsgutachten.
£94.99
De Gruyter Photovoltaic Module Technology
Book SynopsisHow to get the best out of solar cells, when aiming for efficiency, power, reliability, and cost? After decades of R&D focus on the cell, recently the module has entered the stage and demonstrated huge innovation potential. Photovoltaic Module Technology provides unique insights into state-of-the-art materials, design strategies, manufacturing techniques, and characterization methods of wafer-based photovoltaic modules. Many properties of solar cells are highly relevant for module integration. They set the starting point for understanding the implications of different interconnection and encapsulation technologies. Module design and the choice of materials are described for both state-of-the-art and advanced module technology, with special attention attributed to the key processes of module assembly.
£54.45
John Wiley & Sons Inc Photovoltaic Power System
Book SynopsisPhotovoltaic Power System: Modelling, Design and Control is an essential reference with a practical approach to photovoltaic (PV) power system analysis and control. It systematically guides readers through PV system design, modelling, simulation, maximum power point tracking and control techniques making this invaluable resource to students and professionals progressing from different levels in PV power engineering. The development of this book follows the author''s 15-year experience as an electrical engineer in the PV engineering sector and as an educator in academia. It provides the background knowledge of PV power system but will also inform research direction. Key features: Details modern converter topologies and a step-by-step modelling approach to simulate and control a complete PV power system. Introduces industrial standards, regulations, and electric codes for safety practice and research direction. Covers new classificatTrade Review�This book is an excellent explanation of PV power systems and its controls. It brings sufficient knowledge on modeling and designing different kinds of PV systems (both standalone and grid-tied). In the first 4 chapters, it focuses more on the introduction and PV basics such as PV classification, characteristics, and mathematical models. This information will lead readers to a general understanding of PV fundamentals, providing a smooth transition from basic knowledge to advanced industrial PV applications. It perfectly combines the theory and practical exercises. In chapter 5, it discusses the design, simulates and evaluates of state-of-art system components such as PV-side converters, battery-side converters, and grid-side converters. After discussing the system components, in the next two chapters, the complete dynamic modeling of PV systems are introduced. This book emphasizes the computer-aided analysis and simulation verification. The detailed equations behind the functions are provided, and the simulation blocks used are built using the commonly used blocks in Simulink. Readers can easily follow the step-by-step instructions to simulate the whole PV system in Matlab. Apart from system modeling, the control of the entire PV system like linear control and MPPT technology are also addressed. This book fulfills important demand in both academia and industry. It is also a perfect choice to support teaching senior-undergraduate and graduate courses.� Dr. Yang Du, Xi�an Jiaotong Liverpool University �This is a textbook for a course that would appear to be suitable for upper level graduate students. It could also be used by undergraduates and master�s degree level students who want to get a general idea of how solar electric power systems work. The book reads well and should be accessible to most college students and certainly almost all graduate students. In addition to its use for higher education, this book could be used by engineers and utility executives who want to understand the technology of solar photovoltaic systems�It is possible to contemplate using this book to learn about and to teach about solar photovoltaic systems. This is clearly a textbook: it is not a design reference book. With increasing importance of sustainable sources of electric power, there is a clear need to better educate university students about the technology of photovoltaic power. This book should make a serious contribution.� James Kirtley, Professor of Electrical Engineering, Massachusetts Institute of Technology �This book is an excellent choice for beginners working in the photovoltaic industry. It contains a nice mix of industrial applications/examples along with theoretical derivations of photovoltaic system at component- and system-level. The step-by-step discussion on industry background, problem formulation, mathematical modelling, computer simulation, and practical implementation provides a holistic view of designing photovoltaic systems. Detailed simulations modelling the dynamics of individual photovoltaic cell, maximum power point tracking, energy conversion (DC-DC and DC-AC), and grid-level auxiliary services (such as voltage regulation) are also provided. Since the designed MATLAB/SIMULINK block diagrams are provided throughout this book, reproducing the waveforms and results are feasible. In my opinion, this is the most important element� The addition of this book helps students and researchers to quickly grasp the fundamentals of photovoltaic systems. Note that the materials covered in this book are more suitable for graduate students.� Jimmy C.-H. Peng, Assistant Professor, Department of Electrical & Computer Engineering, National University of Singapore �This book provides an inclusive introduction to the field of photovoltaic systems. It covers the basics of PV systems, their classifications, modeling, practical design issues, and their control and operation. It provides in-depth discussions for several modeling and control issues of PV systems and their power electronic converters. The book can be used to help students and researchers gain knowledge on the state of the art in this area and can familiarize engineers with designing safe and practical PV systems. I use the book as a textbook for the graduate course I teach at Worcester Polytechnic Institute about photovoltaic power systems. I found it the most comprehensive book that covers wide areas in PV engineering.� Yousef A. Mahmoud, Assistant Professor, Worcester Polytechnic InstituteTable of Contents Preface xiii Acknowledgments xvii About the companion website xix 1 Introduction 1 1.1 Cell, Module, Panel, String, Subarray, and Array 2 1.2 Blocking Diode 5 1.3 Photovoltaic Cell Materials and Efficiency 6 1.4 Test Conditions 7 1.5 PV Module Test 8 1.6 PV Output Characteristics 9 1.7 PV Array Simulator 12 1.8 Power Interfaces 13 1.9 Standalone Systems 13 1.10 AC Grid-connected Systems 18 1.11 DC Grid and Microgrid Connections 19 1.12 Building-integrated Photovoltaics 21 1.13 Other Solar Power Systems 22 1.14 Sun Trackers 23 Problems 24 References 24 2 Classification of Photovoltaic Power Systems 25 2.1 Background 25 2.2 CMPPT Systems 26 2.2.1 Power Loss due to PV Array Mismatch 29 2.2.2 Communication and Data Acquisition for CMPPT Systems 32 2.3 DMPPT Systems at PV String Level 36 2.4 DMPPT Systems at PV Module Level 37 2.4.1 Module-integrated Parallel Inverters 37 2.4.2 Module-integrated Parallel Converters 39 2.4.3 Module-integrated Series Converters 40 2.4.4 Module-integrated Differential Power Processors 40 2.4.5 Module-integrated Series Inverters 41 2.5 DMPPT Systems at PV Submodule Level 42 2.5.1 Submodule-integrated Series Converters 42 2.5.2 Submodule-integrated Differential Power Processors 43 2.5.3 Isolated-port Differential Power Processors 44 2.6 DMPPT Systems at PV Cell Level 44 2.7 Summary 45 Problems 46 References 46 3 Safety Standards, Guidance and Regulation 49 3.1 Certification of PV Modules 49 3.2 Interconnection Standards 51 3.3 System Integration to Low-voltage Networks 55 3.3.1 Grounded Systems 55 3.3.2 DC Ground Fault Protection 56 3.3.3 Voltage Specification 56 3.3.4 Circuit Sizing and Current 58 3.3.5 Cable Selection 58 3.3.6 Connectors and Disconnects 59 3.3.7 Grid Interconnections through Power Distribution Panels 59 3.3.8 Marking 60 3.4 System Integration to Medium-voltage Network 60 3.4.1 Active Power Throttling 61 3.4.2 Fault Ride-through 61 3.4.3 Reactive Power Support 62 3.5 Summary 63 Problems 63 References 64 4 PV Output Characteristics and Mathematical Models 65 4.1 Ideal Single-diode Model 68 4.1.1 Product Specification 68 4.1.2 Parameter Identification at Standard Test Conditions 69 4.1.3 Variation with Irradiance and Temperature 71 4.2 Model Accuracy and Performance Indices 75 4.3 Simplified Single-diode Models 78 4.3.1 Parameter Identification: Part One 79 4.3.2 Parameter Identification: Part Two 81 4.3.3 Variation with Irradiance and Temperature 87 4.4 Model Selection from the Simplified Single-diode Models 88 4.5 Complete Single-diode Model 91 4.6 Model Aggregation and Terminal Output Configuration 92 4.7 Polynomial Curve Fitting 95 4.8 Summary 99 Problems 100 References 101 5 Power Conditioning 103 5.1 PV-side Converters 104 5.1.1 PV Module for Case Study 105 5.1.2 Buck Converter 105 5.1.3 Full-bridge Isolated Transformer DC/DC Converter 110 5.1.4 Boost Converter 115 5.1.5 Tapped-inductor Boost Topology 119 5.1.6 Buck–Boost Converter 122 5.1.7 Flyback Converter 126 5.2 Battery-side Converter for DC/DC Stage 130 5.2.1 Introduction to Dual Active Bridges 130 5.2.2 Discharge Operation 131 5.2.3 Charging Operation 135 5.2.4 Zero Voltage Switching 139 5.3 DC Link 142 5.3.1 DC Link for Single-phase Grid Interconnection 143 5.3.2 DC Link for Three-phase Grid Interconnections 145 5.4 Grid-side Converter for DC/AC Stage 147 5.4.1 DC to Single-phase AC Grid 147 5.4.2 DC to Three-phase AC Grid 151 5.4.3 Reactive Power 153 5.5 Grid Link 154 5.5.1 L-type for Single-phase Grid Connections 154 5.5.2 L-type for Three-phase Grid Interconnections 155 5.5.3 LCL-type Filters 157 5.5.4 LC-type Filters 160 5.6 Loss Analysis 160 5.6.1 Conduction Loss 161 5.6.2 High-frequency Loss 163 5.7 Conversion Efficiency 165 5.8 Wide Band-gap Devices for Future Power Conversion 165 5.9 Summary 167 Problems 169 References 171 6 Dynamic Modeling 173 6.1 State-space Averaging 173 6.2 Linearization 174 6.3 Dynamics of PV Link 175 6.3.1 Linearization of PV Output Characteristics 175 6.3.2 Buck Converter as the PV-link Power Interface 176 6.3.3 Full-bridge Transformer Isolated DC/DC as the PV-link Power Interface 180 6.3.4 Boost Converter as the PV-link Power Interface 182 6.3.5 Tapped-inductor Topology as the PV-link Power Interface 184 6.3.6 Buck–boost Converter as the PV-link Power Interface 186 6.3.7 Flyback Converter as the PV-link power Interface 188 6.4 Dynamics of DC Bus Voltage Interfaced with Dual Active Bridge 189 6.5 Dynamics of DC Link for AC Grid Connection 192 6.5.1 Single-phase Connection 192 6.5.2 Three-phase Connection 194 6.6 Summary 195 Problems 196 References 197 7 Voltage Regulation 199 7.1 Structure of Voltage Regulation in Grid-connected PV Systems 199 7.2 Affine Parameterization 201 7.3 PID-type Controllers 202 7.4 Desired Performance in Closed Loop 205 7.5 Relative Stability 206 7.6 Robustness 208 7.7 Feedforward Control 209 7.8 Voltage Regulation in PV Links 210 7.8.1 Boost Converter for PV Links 210 7.8.2 Tapped-inductor Topology for PV Links 213 7.8.3 Buck Converter as the PV-link Power Interface 214 7.8.4 Buck–boost Converter as the PV-link Power Interface 216 7.8.5 Flyback Converter as the PV-link Converter 218 7.9 Bus Voltage Regulation for DC Microgrids 220 7.10 DC-link Voltage Regulation for AC Grid Interconnections 221 7.10.1 Single-phase Grid Interconnection 222 7.10.2 Three-phase Grid Interconnection 226 7.11 Sensor, Transducer, and Signal Conditioning 227 7.12 Anti-windup 230 7.13 Digital Control 236 7.13.1 Continuous Time and Discrete Time 240 7.13.2 Digital Redesign 240 7.13.3 Time Delay due to Digital Conversion and Process 243 7.14 Summary 245 Problems 246 References 247 8 Maximum Power Point Tracking 249 8.1 Background 249 8.2 Heuristic Search 252 8.3 Extreme-value Searching 255 8.4 Sampling Frequency and Perturbation Size 257 8.5 Case Study 258 8.6 Start-stop Mechanism for HC-based MPPT 261 8.7 Adaptive Step Size Based on the Steepest Descent 264 8.8 Centered Differentiation 267 8.9 Real-time System Identification 270 8.9.1 Recursive Least Squares Method 270 8.9.2 Newton–Raphson Method for MPP Determination 272 8.9.3 Forgetting Factor 272 8.10 Extremum Seeking 273 8.11 Multiple Power Peaks and Global MPPT 276 8.12 Performance Evaluation of MPPT 277 8.12.1 Review of Indoor Test Environment 277 8.12.2 Review of Outdoor Test Environments 278 8.12.3 Recommended Test Benches for MPPT Evaluation 279 8.12.4 Statistical Paired Differential Evaluation 280 8.13 Summary 281 Problems 283 References 284 9 Battery Storage and Standalone System Design 285 9.1 Batteries 287 9.1.1 Battery Types 288 9.1.2 Battery Terminology 291 9.1.3 Charging Methods 292 9.1.4 Battery Mismatches and Balancing Methods 295 9.1.5 Battery Characteristics and Modeling 300 9.1.6 Battery Selection 308 9.2 Integrating Battery-charge Control with MPPT 308 9.3 Design of Standalone PV Systems 309 9.3.1 Systems without Significant Energy Storage 309 9.3.2 Systems with Significant Energy Storage 311 9.4 Equivalent Circuit for Simulation and Case Study 316 9.5 Simulation Model to Integrate Battery-charging with MPPT 317 9.6 Simulation Study of Standalone Systems 318 9.6.1 Simulation of PV Array 318 9.6.2 Short-term Simulation 319 9.6.3 Medium-term Simulation 321 9.6.4 Long-term Simulations 325 9.6.5 Very-long-term Simulations 328 9.7 Summary 329 Problems 331 References 332 10 System Design and Integration of Grid-connected Systems 333 10.1 System Integration of Single-phase Grid-connected System 335 10.1.1 Distributed Maximum Power Point Tracking at String Level 335 10.1.2 Distributed Maximum Power Point Tracking at PV Module Level 337 10.2 Design Example of Three-phase Grid-connected System 340 10.3 System Simulation and Concept Proof 343 10.3.1 Modeling and Simulation of PV String 344 10.3.2 Modeling and Simulation of DC/DC Stage 345 10.3.3 Modeling and Simulation of DC/AC Stage 349 10.3.4 Overall System Integration and Simulation 351 10.4 Simulation Efficiency for Conventional Grid-connected PV Systems 351 10.4.1 Averaging Technique for Switching-mode Converters 353 10.4.2 Overall System Integration and Simulation 354 10.4.3 Long-term Simulation 357 10.5 Grid-connected System Simulation Based on Module Integrated Parallel Inverters 359 10.5.1 Averaged Model for Module-integrated Parallel Inverters 359 10.5.2 Overall System Integration and Simulation 362 10.6 Summary 365 Problems 366 References 366 Index 367
£81.86
John Wiley & Sons Inc Photovoltaic Manufacturing
Book SynopsisPHOTOVOLTAIC MANUFACTURING This book covers the state-of-the-art and the fundamentals of silicon wafer solar cells manufacturing, written by world-class researchers and experts in the field. High quality and economic photovoltaic manufacturing is central to realizing reliable photovoltaic power supplies at reasonable cost. While photovoltaic silicon wafer manufacturing is at a mature, industrial and mass production stage, knowing and applying the fundamentals in solar manufacturing is essential to anyone working in this field. This is the first book on photovoltaic wet processing for silicon wafers, both mono- and multi-crystalline. The comprehensive book provides information for process, equipment, and device engineers and researchers in the solar manufacturing field. The authors of the chapters are world-class researchers and experts in their field of endeavor. The fundamentals of wet processing chemistry are introduced, covering etching, texturing, cleaning an
£131.35
Valley Press Photovoltaic
Book Synopsis
£15.00
Taylor & Francis Ltd Theoretical Modeling of Organohalide Perovskites for Photovoltaic Applications
Book SynopsisPerovskites are a class of recently discovered crystals with a multitude of innovative applications. In particular, a lead role is played by organic-inorganic halide perovskites (OIHPs) in solar devices. In 2013 Science and Nature selected perovskite solar cells as one of the biggest scientific breakthroughs of that year. This book provides the first comprehensive account of theoretical aspects of perovskite solar cells, starting at an introductory level but covering the latest cutting-edge research.Theoretical Modeling of Organohalide Perovskites for Photovoltaic Applications aims to provide a theoretical standpoint on OIHPs and on their photovoltaic applications, with particular focus on the issues that are still limiting their usage in solar cells. This book explores the role that organic cations and defects play in the material properties of OIHPs and their effects on the final device, in addition to discussing the electric properties of OTrade Review"Organohalide perovskites have emerged as a strong candidate for the next generation of thin film photovoltaics. This is a fantastic book shedding light onto the underlying physical properties of this material. It will be useful to a broad range of readers from young graduate students to senior researchers."—Prof. Yang Yang, Carol and Lawrence E. Tannas Jr. Endowed Chair in Engineering, UCLATable of ContentsPrefaceEditorsContributorsChapter 1 Structure and Thermodynamic Properties of Hybrid Perovskites by Classical Molecular DynamicsAlessandro Mattoni, Alessio Filippetti, and Claudia CaddeoChapter 2 Bulk Structural and Electronic Properties at the Density Functional Theory and Post-Density Functional Theory Level of CalculationClaudia Caddeo, Alessandro Mattoni, Alessio Filippetti, and Mao-Hua DuChapter 3 Electric Properties of Organic–Inorganic Halide Perovskites and Their Role in the Working Principles of Perovskite-Based Solar DevicesClaudio Quarti, Domenico Di Sante, Liang Z. Tan, Edoardo Mosconi, Giulia Grancini, Alessandro Stroppa, Paolo Barone, Filippo De Angelis, Silvia Picozzi, and Andrew M. RappeChapter 4 Alloys and Environmental Related Issues: Toward the Computational Design of Pb-Free and Stable Hybrid Materials for Solar CellsFedwa El Mellouhi, Fahhad H. Alharbi, Carlo Motta, Sergey Rashkeev, Stefano Sanvito, and Sabre KaisChapter 5 Atomic Structures and Electronic States at the Surfaces and Interfaces of CH3NH3PbI3 PerovskiteJun Haruyama, Keitaro Sodeyama, and Yoshitaka TateyamaChapter 6 Computational High-Throughput Screening for Solar Energy MaterialsIvano E. Castelli, Kristian S. Thygesen, and Karsten W. JacobsenChapter 7 Organic–Inorganic Halide Perovskite Quasi-Particle Nature Analysis via the Interplayamong Classic Solid-State Concepts, Density Functional, and Many-Body Perturbation TheoryJacky Even, Giacomo Giorgi, Claudine Katan, Hiroki Kawai, and Koichi YamashitaIndex
£45.99
ISTE Ltd and John Wiley & Sons Inc Photovoltaism, Agriculture and Ecology: From
Book SynopsisOne of the challenges of our modern society is to successfully reconcile growing energy demand, demographic and food pressure and ecological and environmental urgency.This book offers an update on a rapidly evolving subject, that of modern photovoltaic systems capable of combining the needs of energy and ecological transition. Although photovoltaic solar energy is a well-proven technical solution in terms of energy, its development can compete with agricultural land or natural sites.New solutions are emerging: the installation of photovoltaic parks on industrial wasteland; agrivoltaics, which reconcile agricultural activity and energy production on the same surface; and ecovoltaics, which make it possible to make use of the unused surfaces under solar panels by developing ecological solutions capable of providing services to nature. These innovations are part of the response to the need to preserve terrestrial and aquatic ecosystems, halt the decline in animal and plant biodiversity and participate in the development of a new mode of sustainable development and green economy.Table of ContentsForeword by Yvon Le Maho ix Foreword by Thomas Lesueur xiii Introduction xv Chapter 1. Photovoltaics: Concepts and Challenges 1 1.1. Brief description of the different photovoltaic cell technologies 1 1.1.1. Photovoltaic versus thermal solar panels 9 1.2. Different types of photovoltaic installations 9 1.3. Legislation 10 1.4. Advantages of photovoltaics 11 1.5. Disadvantages of photovoltaics 12 1.6. Some figures on the environmental footprint compared to other energy sources 13 1.7. Origin of the silicon needed for the construction of photovoltaic cells 16 1.8. End of life of solar panels 17 1.9. Degree of maturity of material recycling 17 1.10. Location and mode of development of photovoltaics 18 1.10.1. Photovoltaic panels on roofs 18 1.10.2. Ground-mounted photovoltaic panels: creating solar fields on unused industrial wastelands and parking lots 26 1.10.3. Creating solar fields in arid areas 32 1.10.4. Creating photovoltaic parks on water 35 Chapter 2. Photovoltaic Energy Production and Agricultural Activity: Agrivoltaics 37 2.1. Definition–legislation–adaptation and evolution of techniques 38 2.2. Food crops 45 2.2.1. Fish farming 46 2.2.2. Oyster farming 47 2.2.3. Viticulture 49 2.2.4. Arboriculture and fruit production 50 2.2.5. Field crops 53 2.2.6. Market gardening: shades, greenhouses, protective structures for environmental conditions 54 2.2.7. Other crops 55 2.2.8. Pasture and livestock 57 Chapter 3. Innovative Principle of Ecovoltaics 63 3.1. Definition and concept 63 3.2. State of the art: feedback 64 3.2.1. Constraints of the experimental site in Occitanie 64 3.2.2. Planting of species of interest in biodynamic agriculture on the grounds of solar parks 69 3.2.3. Planting of melliferous species 81 3.2.4. Installation of regionally endangered species 88 3.2.5. Installation of medicinal species 89 3.3. Assessment – issues 91 3.3.1. Positive impact on soil quality 91 3.3.2. Positive impact on faunal biodiversity 93 3.4. Perspectives 97 3.4.1. Regulations for the marketing of plants or plant extracts for use in biodynamic agriculture 97 Appendices 103 Appendix 1 105 Appendix 2 113 Appendix 3 115 References 121 Index 135
£124.15
Verlag Unser Wissen Zukunftsträchtige Trends in der Photovoltaik
£51.68
John Wiley & Sons Inc Photovoltaic Design Installation For Dummies
Book SynopsisTable of ContentsIntroduction 1 About This Book 1 Conventions Used in This Book 2 What You’re Not to Read 3 Foolish Assumptions 3 How This Book Is Organized 3 Part 1: Here Comes the Sun: Shedding Some Light on PV Systems 4 Part 2: Digging into Complete System Details 4 Part 3: Sizing a PV System 4 Part 4: Installing a PV System 4 Part 5: The Part of Tens 5 Icons Used in This Book 5 Where to Go from Here 5 Part 1: Here Comes the Sun: Shedding Some Light on PV Systems 7 Chapter 1: The Photovoltaic Revolution 9 Peeking into the Past, Present, and Future of PV Installations 9 Acquainting yourself with typical PV applications 10 Checking out PV pros and cons 10 Looking into the future of PV 11 Introducing PV Components and Systems 11 Knowing Your Electricity A-B-Cs 12 Solar Resource 101 13 Surveying a PV System Site 13 Delving into PV System Details 14 PV modules 14 Batteries 14 Charge controllers 15 Inverters 15 Wiring and safety devices 15 Sizing a PV System 16 Grid-direct systems 16 Battery-based systems 16 Conductors and safety devices 17 Bringing a PV System to Life 17 Permitting 17 Staying safe 17 Putting together the mechanical parts 18 Adding the electrical parts 18 Commissioning, inspecting, and maintaining a system 19 Introducing the Sections of Code You Need to Know 20 Chapter 2: Checking Out Common Components and Systems 21 Introducing the Components That Make Up PV Systems 21 PV modules and racking 22 Battery bank 23 Charge controller 24 Inverter 24 Loads 25 Load centers 26 Disconnects and overcurrent protection 27 Utility interconnection 27 Differentiating between PV System Types 29 Grid-direct systems 29 Battery-based systems 31 Figuring Out the Right System Type for Any Situation 34 The customer is connected to the grid 34 The customer isn’t connected to the grid 35 Chapter 3: Powering through Electricity Basics 37 Going with the Flow: Current 38 Understanding amps 38 Distinguishing between direct current and alternating current 39 Measuring current with a meter 40 May the (Electromotive) Force Be with You: Voltage 43 Grasping the concept of voltage 43 Getting a grip on nominal voltage and operating voltage 43 Measuring voltage 44 Making a Stop: Resistance 46 Introducing ohms 47 Measuring resistance 47 Connecting Current, Voltage, and Resistance with Ohm’s Law 49 Pondering Power and Energy 50 Recognizing the differences between power and energy 50 Relating power to current, voltage, and resistance with the power equation 51 Calculating energy in terms of watt-hours 53 Introducing amp-hours, a companion to watt-hours 53 Wrapping Together Current, Voltage, Resistance, Power, and Energy 54 Another Electricity Concept: Circuit Configurations 55 Series 56 Parallel 57 Series-parallel 58 Chapter 4: Warming Up to the Solar Resource 59 High (Or Low) Energy: Solar Radiation 60 Distinguishing between direct radiation and diffuse radiation 60 Determining the intensity of solar radiation: Irradiance 61 Calculating solar radiation energy: Irradiation 65 Just for a day: Peak sun hours 66 Examining the Effects of the Sun’s Path on the Earth 69 Getting a grip on seasonal effects 70 Understanding the sun’s relationship to your location: Altitude and azimuth 72 Ticking off solar time 74 Interpreting sun charts 74 Opening up to the solar window 76 Positioning PV Modules to Make the Most of the Solar Resource 77 Introducing tilt angle 77 Orienting your array to the azimuth 79 Chapter 5: Properly Selecting a Site for a PV System 81 Setting the Stage for a Site Survey 82 Putting aside enough time 82 Creating a standard site-survey form 83 Toting a site-survey bag 83 Picture This: Documenting Your Entire Site Survey with Digital Photos 84 Collecting Basic Information during a Site Survey 86 General site information 86 Structural and mechanical information 87 Electrical information 89 Measuring Information in Degrees 90 Understanding magnetic declination 91 Calculating the array’s tilt angle and azimuth 93 Exploring Shading-Analysis Tools 95 Interpreting the Data and Bringing It All Together 97 Analyzing reports from your shading-analysis tool 98 Considering the total solar resource factor 98 Using other collected information to plan out the design and installation 100 Part 2: Digging Into Complete System Details 103 Chapter 6: PV Modules: From Sand to Electricity 105 Creating Solar Electricity: It All Starts with a Cell 106 Getting a grip on cell construction and manufacturing 106 Connecting cell construction to the photovoltaic effect 108 Reviewing Common Types of PV Modules 108 Checking out crystalline modules 109 Looking at thin film modules 111 Pointing Out Electrical Specifications on PV Modules 113 Current specifications 114 Voltage specifications 115 Maximum power point 116 Voltage temperature coefficient 117 Power tolerance 118 Series fuse rating 118 Surveying Test Conditions for PV Modules 118 Standard test conditions 119 Environmental effects on standard test conditions 120 Relating Current and Voltage in IV Curves 122 An IV curve with varying temperature 123 An IV curve with varying irradiance 124 Chapter 7: The Basics of Batteries 127 The Fundamentals of Battery Anatomy and Operation 128 Constructing a battery, from cell to bank 128 Discovering how batteries charge and discharge 130 Comparing Different Types of Batteries 133 Lead-acid batteries 133 Lead-calcium batteries 136 Nickel-cadmium batteries 136 Comprehending Battery Capacity 137 Considering the C rate for capacity 137 Recognizing factors that affect capacity 138 Specifying Batteries 141 Specifying the type of battery to use 141 Specifying the battery bank size 142 Chapter 8: Keeping Current and Voltage in Check: Charge Controllers 147 The Essentials of Charge Controllers 148 Seeing how a charge controller works in stages 148 Surveying special effects provided by some charge controllers 151 Maximum Power Point Tracking Technology 153 How MPPT works 153 The pros and cons of MPPT controllers 154 Pulse-Width Modulation Technology 155 How PWM works 155 The pros and cons of PWM controllers 156 Specifying a Charge Controller 156 Chapter 9: Inverters: AC (From) DC 157 Getting the Goods on Grid-Direct Inverters 158 Basic operation 158 Standard features 159 Power output sizes 162 The importance of transformers 162 Investigating Battery-Based Inverters 164 Utility-interactive inverter operation 165 Stand-alone inverter operation 166 Standard features for all battery-based inverters 167 Sizes of battery-based inverters 168 Low-frequency transformer technology 168 Specifying Any Inverter 168 Grid-direct 169 Battery-based 170 Chapter 10: Staying Secure: Wiring and Safety Components 173 Defining the Circuits in a PV System 174 Checking Out Types of Conductors 175 USE-2 176 PV wire 176 Building wiring 177 Battery wiring 178 Ground wiring 178 Considering Kinds of Conduit 179 Metallic conduit 179 Nonmetallic conduit 180 Delving into Disconnects 181 Perusing Overcurrent Protection Devices 182 Circuit breakers 183 Fuses 183 Focusing on Ground Fault Protection 184 Looking at the Basics of Labels 185 Part 3: Sizing a PV System 187 Chapter 11: Sizing a Grid-Direct System 189 First Things First: Evaluating the Budget and the Available Array Area 190 Estimating the Site’s Annual Energy Production 191 Sizing the Array to Meet Your Client’s Energy Consumption 193 Determining annual energy consumption 193 Looking at contract options with the utility 194 Using consumption and contract options to select an array’s needed power value 195 Getting Ready to Match an Inverter to an Array 196 Matching Power Values for an Array and an Inverter 197 Coming Up with the Right Voltage Values for Your Array and Inverter 199 Establishing the inverter’s AC voltage 200 Defining the inverter’s DC voltage window 200 Calculating the modules’ maximum DC voltage contribution 201 Figuring out the modules’ minimum DC voltage contribution 208 Bringing It All Together: Combining Your Power and Voltage Information 213 One Last Check: The Inverter’s Maximum Current Input 214 Chapter 12: Sizing a Battery-Based System 215 Get Loaded: Looking at Loads in a Battery-Based System 216 Evaluating the loads that the battery bank must serve 216 Calculating the energy required during an outage for utility-interactive systems 219 Determining the average daily energy consumption for stand-alone systems 219 Sizing the Battery Bank 222 Inverter efficiency 222 The days of autonomy 223 The temperature used for battery operation 223 The depth of discharge 224 Nominal voltages 225 Figuring out the battery capacity you need 226 Strung along: Wiring the battery bank 227 Sizing the PV Array 229 Sizing the array in a utility-interactive system 229 Sizing the array in a stand-alone system 230 Sizing the Charge Controller 232 Voltage specifications 233 Power or amperage specifications 234 A check before you move on: Comparing the array size to the battery capacity 236 Sizing the Inverter 236 Viewing voltage output 237 Calculating the power draw 237 Staying in charge 238 Looking at surge ratings 238 Evaluating inverter and array power output 239 Incorporating a Generator 239 Generator features 240 Generator sizing 241 Chapter 13: Sizing Conductors, Conduit, and Safety Components 243 Conductor Sizing 101 244 Defining the PV circuits’ maximum and continuous current 245 Calculating non-PV circuits’ maximum current 246 Considering conditions of use with some handy tables 247 Putting together the details to determine conductor sizing 250 Accounting for voltage drop after you size your conductors 253 Sizing Conduit 257 Sizing Overcurrent Protection Devices and Disconnects 258 Beginning with a few basics 258 Placing protection on PV circuits 259 Protecting inverter circuits 260 Part 4: Installing a PV System 261 Chapter 14: The Permitting Process 263 Obtaining Permits before You Install a PV System 263 In the beginning: Having the right licenses and certifications 264 Home grown: Permitting for residential systems 265 Big business: Permitting for commercial systems 269 Not Just Pretty Pictures: Creating Drawing Sets 272 Calling out components clearly 273 Depicting equipment locations 273 Showing conductor-sizing calculations 273 Jotting down job notes 274 Chapter 15: Staying Safe Anytime You Work on a PV System 275 Getting a Grip on General Construction Site Safety 276 Identifying job-site obstacles and putting on protective gear right away 276 Safely working alone and with others 277 Taking in tips for tool safety 278 Limiting your exposure to the elements 278 Stowing a first-aid kit on the job site 279 Looking at Ladder Safety 279 Selecting your stash of ladders 279 Properly setting up any ladder 281 Raising the Issue of Rooftop Safety 282 Restraining yourself with fall protection 283 Storing your tools 283 Maintaining safe walkways 285 Examining Electrical Safety 285 Staying aware of general shock hazards 285 Working with circuits 286 Charging Ahead with Battery Safety 290 Chapter 16: Assembling the Mechanical Parts 293 Surveying PV Array Mounting Methods 294 Roof mounting 295 Ground mounting 300 Top-of-pole mounting 302 Building-integrated mounting 303 Considering Loading When You Mount an Array on a Roof 305 Following building codes 305 Accounting for additional dead load 305 Looking at live loads 307 Properly Attaching an Array to a Roof 309 Making attachments with lag screws 309 Sealing roof penetrations with flashing 310 Supporting Ground and Top-of-Pole Mounting 313 Chapter 17: Integrating the Electrical Elements 315 Location Is Everything: Knowing Where to Place Electrical Equipment 316 Manufacturers’ requirements for equipment locations 316 Locations for disconnecting means 317 Combiner boxes and junction boxes and wiring, oh my! 318 Working on Wiring 319 Seeing red (and green and white): Color-coding 319 Managing wires on PV modules 321 Protecting wires with conduit 322 Bonding Yourself to Grounding 323 Equipment grounding 323 System grounding 326 Connecting to the Utility 329 Determining the utility’s requirements 329 Making a load side or line side connection 331 Chapter 18: Commissioning, Inspecting, and Maintaining a PV System 335 Making a List and Checking It Twice: Preparing for Commissioning 336 Mechanical elements? Check! 336 Electrical elements? Check! 337 Start ’Er Up: The Commissioning Process 341 Putting safety first 342 Gathering the gear you need 342 Commissioning different types of systems 343 Verifying that the system is working 347 Arming Yourself for Inspection Issues 349 Not having “a neat and workmanlike manner” 350 Forgetting about aesthetics 350 Failing to manage conductors on the array 350 Neglecting to label the system 351 Surveying System Maintenance 353 Mechanical maintenance 354 Electrical maintenance 354 Maintenance on a higher level: Taking care of battery banks 355 Part 5: The Part of Tens 359 Chapter 19: Ten Ways to Avoid Common Code Mistakes 361 Providing Proper Working Clearance 362 Supplying the Right Structural Support 362 Keeping Water out of Buildings with Flashing 363 Ensuring All Conductors Have the Necessary Ratings 363 Managing the Conductors on Modules 364 Selecting the Correct Conduit 364 Locating the Disconnects 365 Grounding the Equipment 365 Grounding the System 366 Labeling the System Properly 366 Chapter 20: Ten Ways to Maximize Energy Production for Your Clients 367 Select the Right Site 367 Orient the Array Correctly 368 Configure the Array Properly 368 Work within the Limits of the Utility Voltage 369 Choose the Correct Inverter 369 Size Conductors Appropriately 370 Keep the Components Cool 370 Advise Clients to Monitor Their System 371 Clean the Array Periodically 371 Inspect the Array Annually 372 Index 373
£18.69
Springer Photon to Power
Book Synopsis1. Fundamentals of Photovoltaic Technologies.- 2. Silicon-Based Technologies for Solar to Photovoltaic Conversion.- 3. Thin-Film Solar Cells: An Overview of Materials and Fabrication Methods.- 4. Principles and Applications of Concentrated Solar Power Systems.- 5. Design and Optimization of Solar Thermal Collectors.
£98.99
Taylor & Francis Inc Grid Integration of Solar Photovoltaic Systems
Book SynopsisThis book covers the various aspects of solar photovoltaic systems including measurement of solar irradiance, solar photovoltaic modules, arrays with MATLAB implementation, recent MPPT techniques, latest literature of converter design (with MATLAB Simulink models), energy storage for PV applications, balance of systems, grid integration of PV systems, PV system protection, economics of grid connected PV system and system yield performance using PV system. Challenges, issues and solutions related to grid integration of solar photovoltaic systems are also be dealt with.Table of Contents1. Exposure to Renewable Energy Sources2. Electrical Fundamentals3. Measurement and Estimation of Solar Irradiance 4. Solar Photovoltaic Cells, Modules, and Arrays 5. Maximum Power Point Tracking Techniques and Charge Controllers6. Converter Design 7. Energy Storage for PV Applications8. Mounting Structure 9. Balance of Systems10. Site Selection and Assessment11. Grid Integration of PV Systems12. PV System Protection13. Economics of Grid-Connected PV Systems 14. System Yield and Performance15. Design of Transformers, Inductors, and Filters for PV ApplicationsBibliographyIndex
£150.00
John Wiley & Sons Inc Photoelectrochemical Solar Cells
Book SynopsisThis book provides a broad overall view of the photoelectrochemical systems for solar hydrogen generation, and new and novel materials for photoelectrochemical solar cell applications. Hydrogen has a huge potential as a safe and efficient energy carrier, which can be used directly in fuel cells to obtain electricity, or it can be used in the chemical industry, fossil fuel processing or ammonia production. However, hydrogen is not freely available in nature and it needs to be produced. Photoelectrochemical solar cells produce hydrogen from water using sunlight and specialized semiconductors, which use solar energy to directly dissociate water molecules into hydrogen and oxygen. Hence, these systems reduce fossil fuels dependency and curb carbon dioxide emissions. Photoelectrochemical Solar Cells compiles the objectives related to the new semiconductor materials and manufacturing techniques for solar hydrogen generation. The chapters are written by distinguTable of ContentsPreface xi Part I: General Concepts and Photoelectrochemical Systems 1 1 Photoelectrochemical Reaction Engineering for Solar Fuels Production 3Isaac Holmes-Gentle, Faye Alhersh, Franky Bedoya and Klaus Hellgardt 1.1 Introduction 3 1.1.1 Undeveloped Power of Renewables 4 1.1.2 Comparison Solar Hydrogen from Different Sources 5 1.1.3 Economic Targets for Hydrogen Production and PEC Systems 6 1.1.4 Goals of Using Hydrogen 8 1.2 Theory and Classification of PEC Systems 9 1.2.1 Classification Framework for PEC Cell Conceptual Design 10 1.2.2 Classification Framework for Design of PEC Devices 13 1.2.3 Integrated Device vs PV + Electrolysis 19 1.3 Scaling Up of PEC Reactors 19 1.4 Reactor Designs 20 1.5 Systems-Level Design 28 1.6 Outlook 30 1.6.1 Future Reactor Designs 30 1.6.1.1 Perforated Designs 30 1.6.1.2 Membrane-less and Microfluidic Designs 31 1.6.1.3 Redox-Mediated Systems 31 1.6.2 Avenues for Future Research 33 1.6.2.1 Intensification and Waste Heat Utilization 33 1.6.2.2 Usefulness of Oxidation and Coupled Process with Hydrogen Generation 33 1.7 Summary and Conclusions 34 References 35 2 The Measurements and Efficiency Definition Protocols in Photoelectrochemical Solar Hydrogen Generation 43Jingwei Huang and Qizhao Wang 2.1 Introduction 43 2.2 PEC Measurement 44 2.2.1 Measurements of Optical Properties 44 2.2.2 Polarization Curve Measurements 45 2.2.3 Photocurrent Transients Measurements 46 2.2.4 IPCE and APCE Measurements 47 2.2.5 Mott–Schottky Measurements 48 2.2.6 Measurement (Calculation) of Charge Separation Efficiency 50 2.2.7 Measurements of Charge Injection Efficiency 51 2.8 Gas Evolution Measurements 52 2.3 The Efficiency Definition Protocols in PEC Water Splitting 53 2.3.1 Solar-to-Hydrogen Conversion Efficiency 53 2.3.2 Applied Bias Photon-to-Current Efficiency 54 2.3.3 IPCE and APCE 55 2.4 Summary 56 References 56 3 Photoelectrochemical Cell: A Versatile Device for Sustainable Hydrogen Production 59Mohit Prasad, Vidhika Sharma, Avinash Rokade and Sandesh Jadkar 3.1 Introduction 60 3.2 Photoelctrochemical (PEC) Cells 61 3.2.1 Solar-to-Hydrogen (STH) Conversion Efficiency 65 3.2.2 Applied Bias Photon-to-Current Efficiency (ABPE) 65 3.2.3 External Quantum Efficiency (EQE) or Incident Photon-to-Current Efficiency (IPCE) 65 3.2.4 Internal Quantum Efficiency (IQE) or Absorbed Photon-to-Current Efficiency (APCE) 66 3.3 Monometal Oxide Systems for PEC H2 Generation 66 3.3.1 Titanium Dioxide (TiO2) 67 3.3.2 Zinc Oxide (ZnO) 68 3.3.3 Tungsten Oxide (WO3) 70 3.3.4 Iron Oxide (Fe2O3) 75 3.3.5 Bismuth Vandate (BiVO4) 76 3.4 Complex Nanostructures for PEC Splitting of Water 77 3.4.1 Plasmonic Metal Semiconductor Composite Photoelectrodes 77 3.4.2 Semiconductor Heterojunctions 80 3.4.3 Quantum Dots Sensitized Semiconductor Photoelectrodes 82 3.4.4 Synergistic Effect in Semiconductor Photoelectrodes 83 3.4.5 Biosensitized Semiconductor Photoelectrodes 85 3.4.6 Tandem Stand-alone PEC Water-Splitting Device 92 3.5 Conclusion and Outlook 98 Acknowledgments 101 References 101 4 Hydrogen Generation from Photoelectrochemical Water Splitting 121Yanqi Xu, Qian Zhao, Cui Du, Chen Zhou, Huaiguo Xue and Shengyang Yang 4.1 Introduction 122 4.2 Principle of Photoelectrochemical (PEC) Hydrogen Generation 122 4.3 Photoeletrode Materials 125 4.3.1 Photoanode Materials 125 4.3.1.1 TiO2-Based Photoelectrode 125 4.3.1.2 BiVO4-Based Photoelectrode 126 4.3.1.3 α-Fe2O3-Based Photoelectrode 129 4.3.2 Photocathode Materials 129 4.3.2.1 Copper-Based Chalcogenides-Based Photoelectrode 129 4.3.2.2 Silicon-Based Photoelectrode 130 4.3.2.3 Cu2O-Based Photoelectrode 131 4.3.2.4 III-V Group Materials 132 4.3.2.5 CdS-Based Photoelectrode 134 4.4 Advances in Photoelectrochemical (PEC) Hydrogen Generation 135 4.4.1 Monocomponent Catalyst 135 4.4.2 Functional Cocatalyst 137 4.4.3 Z-scheme Catalyst 139 4.5 Pros and cons of photoelectrodes and photocatalysts 142 4.6 Conclusion and Outlook 144 Acknowledgments 145 References 145 Part II: Photoactive Materials for Solar Hydrogen Generation 159 5 Hematite Materials for Solar-Driven Photoelectrochemical Cells 161Tianyu Liu, Martina Morelli and Yat Li 5.1 Introduction 161 5.2 Physical Properties of Hematite 163 5.2.1 Crystal Structure 163 5.2.2 Optical Properties 164 5.2.3 Electronic Properties 165 5.2.4 Band Structure 166 5.2.5 Overview of Hematite Bottlenecks and Corresponding Strategies 167 5.2.5.1 Addressing Poor Light Absorption Efficiency 168 5.2.5.2 Addressing Fast Charge Carrier Recombination 169 5.2.5.3 Addressing Sluggish Water Oxidation 5.3 Kinetics 169 5.3 Experimental Strategies to Enhance the Photoactivity of Hematite 170 5.3.1 Nanostructuring 170 5.3.1.1 Direct Synthesis 170 5.3.1.3 In Situ Structural Transformation 172 5.3.1.4 “Locking” Nanostructures 173 5.3.2 Doping 175 5.3.2.1 Oxygen Vacancies 175 5.3.2.2 Foreign Ion Doping 177 5.3.3 Construction of Heterojunctions 180 5.3.3.1 Semiconducting Overlayers 180 5.3.3.2 Sensitization and Tandem Cells 181 5.3.3.3 OER Catalysts 182 5.3.3.4 Engineering of Current Collectors 184 5.4 Fundamental Characteristics of the PEC Behaviors of Hematite 185 5.4.1 Transient Absorption Spectroscopy 185 5.4.2 Effects of Morphology 196 5.4.3 Effect of Doping 198 5.4.3.1 Oxygen (O) Vacancies 198 5.4.3.2 n-type Dopants 199 5.4.3.3 p-type Dopants 201 5.4.3.4 Isovalent Dopants 201 5.4.3.5 Multiple Dopants 201 5.4.4 Effect of Water Oxidation Catalysts 202 5.4.4.1 Mechanism of Uncatalyzed Water Oxidation 202 5.4.4.2 Mechanism of Catalyzed Water Oxidation 203 5.4.5 Effect of Heterojunctions 204 5.4.5.1 Facilitating Charge Separation and Transfer 204 5.4.5.2 Surface Passivation 206 5.4.5.3 Back-contact Engineering 207 5.5 Summary 208 References 209 6 Design of Bismuth Vanadate-Based Materials: New Advanced Photoanodes for Solar Hydrogen Generation 219Olivier Monfort, Panagiotis Lianos and Gustav Plesch 6.1 Introduction 220 6.2 Photoanodes in Photoelectrochemical Processes 220 6.3 Bismuth Vanadate (BiVO4) 224 6.3.1 Structure and Properties of BiVO4 225 6.3.2 Synthesis of BiVO4 226 6.3.3 Applications of BiVO4 Materials 227 6.4 BiVO4 as Photoanode for Solar Hydrogen Generation 228 6.4.1 Optimization of the Photoanode 228 6.4.1.1 Photoanode Preparation 228 6.4.1.2 Choice of the Electrolyte 231 6.4.2 Solar Hydrogen Generation by Water Splitting 233 6.5 Modified BiVO4 Photoanodes 236 6.5.1 Transition Metal-Modified BiVO4 237 6.5.1.1 Generalities 237 6.5.1.2 Nb-modified BiVO4 238 6.5.2 BiVO4 Composites 240 6.5.2.1 Generalities 240 6.5.2.2 BiVO4/TiO2 Composite 242 6.6 Conclusion 245 6.7 Acknowledgments 246 References 246 7 Copper-Based Chalcopyrite and Kesterite Materials for Solar Hydrogen Generation 251Cigdem Tuc Altaf, Nazrin Abdullayeva and Nurdan Demirci Sankir 7.1 Introduction 252 7.2 Chalcopyrite I-III-VI2 Semiconductors 253 7.2.1 Material Properties 253 7.2.2 Synthesis Techniques of Chalcopyrite CuInS/Se2 Nanocrystals 255 7.2.2.1 Hot-Injection Method 258 7.2.2.2 Heat-Up (Noninjection) Method 258 7.2.2.3 Thermal Decomposition Method 258 7.2.2.4 Solvothermal Method 259 7.2.2.5 Microwave Treatment Method 260 7.2.3 Chalcopyrite CuInS/Se2 Thin-Film Fabrication Methods 260 7.2.3.1 Vacuum-Based Techniques 262 7.2.3.2 Nonvacuum Techniques 263 7.2.4 Applications in Photoelectrochemical Cells 266 7.3 Cu-Based Kesterite (I2-II-IV-VI4) Semiconductors 269 7.3.1 Material Properties 269 7.3.2 Synthesis Techniques of Kesterite Cu2ZnSnS/Se4 Nanocrystals 272 7.3.2.1 Hot-Injection Method 272 7.3.2.2 Solvothermal/Hydrothermal Method 274 7.3.2.3 Microwave-Assisted Chemical Synthesis 275 7.3.2.4 Additional Novel Approaches to CZTS Nanocrystal Syntheses 275 7.3.3 Kesterite Cu2ZnSnS4 Thin-Film Fabrication Methods 277 7.3.3.1 Vacuum-based Techniques 277 7.3.3.2 Nonvacuum Techniques 280 7.3.4 Applications in Photoelectrochemical Cells 284 7.4 Concluding Remarks 284 References 287 8 Eutectic Composites for Photoelectrochemical Solar Cells (PSCs) 297J. Sar, K. Kolodziejak, K. Wysmulek, K. Orlinski, A. Kusior, M. Radecka, A. Trenczek-Zajac, K. Zakrzewska and D.A. Pawlak 8.1 Introduction 297 8.2 The Photoelectrolysis of Water as a Source of Hydrogen 298 8.3 Experimental Methods for Studying Photoactive Materials Such as Electrochemical (Mott–Schottky Plots) and Photoelectrochemical Determination of the Flat-Band Potential, Impedance Spectroscopy, and Bandgap by Optical Spectroscopy 302 8.4 Eutectic Composites 318 8.5 Methods of Obtaining Eutectic Composites 322 8.6 Eutectic Composites used for Photoelectrochemical Water Splitting 324 8.7 Other Potential Eutectic Composites 328 8.8 Modification of the Properties of Eutectic Composites 329 8.9 Conclusions 331 References 332 Part III: Photoelectrochemical Related Systems 341 9 Implementation of Multijunction Solar Cells in Integrated Devices for the Generation of Solar Fuels 343V. Smirnov, K. Welter, F. Finger, F. Urbain, J.R. Morante, B. Kaiser and W. Jaegermann 9.1 Introduction 344 9.2 Multijunction Solar Cells as Photoelectrodes 349 9.3 PV-EC Devices Based on Multijunction Solar Cells 355 9.4 Promising Device Designs, Future Prospects 362 9.5 Summary and Conclusions 367 References 370 10 Photoelectrochemical Cells: Dye-Sensitized Solar Cells 375Go Kawamura, Pascal Nbelayim, Wai Kian Tan and Atsunori Matsuda 10.1 Introduction 376 10.2 Brief History of Solar Cells to DSSCs 377 10.3 Structure, Components, and Working Principle of the DSSC 377 10.3.1 The Transparent Conducting Oxide (TCO) Substrate 379 10.3.2 The Hole Blocking Layer (HBL) 379 10.3.3 The Photoanode 379 10.3.4 The Sensitizer/Dye 383 10.3.5 The HTM/Electrolyte 385 10.3.6 The CE 385 10.3.7 Electron Kinetics in an Active DSSC 386 10.4 Characterization Techniques for DSSCs 387 10.4.1 Computational Modeling 387 10.4.2 Morphological and Structural Studies 387 10.4.2.1 Electron Microscopy 387 10.4.2.2 X-Ray Diffraction 388 10.4.3 Dye Adsorption. 389 10.4.4 Spectroscopic Techniques 389 10.4.4.1 Optical (UV–Vis) Spectroscopy 389 10.4.4.2 X-ray Photoelectron Spectroscopy 390 10.4.4.3 FTIR Spectroscopy 390 10.4.4.4 Raman Spectroscopy 390 10.4.4.5 Material Composition 391 10.4.5 Electromagnetic Measurements 391 10.4.5.1 Hall Effect Measurement 391 10.4.5.2 Electron Paramagnetic Resonance Analysis 391 10.4.6 (Photo-)Electrochemical Measurements 391 10.4.6.1 Photovoltaic Properties 392 10.4.6.2 Electrochemical Impedance Spectroscopy 392 10.4.6.3 Electron Transport 392 10.4.6.4 Electron Lifetime 393 10.4.6.5 Electron Concentration 394 10.4.6.6 Flat-band Potential 394 10.4.6.7 Charge Collection Efficiency 394 10.5 Plasmonic DSSCs 395 10.6 Dye-Sensitized Solar Hydrogen Production 398 10.7 Applications and Future Outlook of DSSC 403 10.8 Academic 404 References 405 11 Photocatalytic Formation of Composite Electrodes for Semiconductor-Sensitized Solar Cells 415Oleksandr Stroyuk, Andriy Kozytskiy and Stepan Kuchmiy 11.1 Introduction 416 11.2 Photocatalytic Deposition of Metal Sulfide Nanoparticles on the Surface of Wide-Bandgap Semiconductors 417 11.2.1 Photodeposition of Cadmium Sulfide NPs 420 11.2.2 Photocatalytic Deposition of Lead Sulfide 430 11.2.3 Photocatalytic Deposition of Silver Sulfide 431 11.2.4 Photodeposition of Antimony Sulfide 431 11.2.5 Photocatalytic Deposition of Molybdenum and Tungsten Sulfides 433 11.2.6 Photocatalytic Deposition of Copper Sulfide 434 11.3 Photocatalytic Deposition of Metal Selenides 435 11.4 Conclusion and Outlook 442 References 443 Index 449
£164.66
John Wiley & Sons Inc Interfacial Engineering in Functional Materials
Book SynopsisOffers an Interdisciplinary approach to the engineering of functional materials for efficient solar cell technology Written by a collection of experts in the field of solar cell technology, this book focuses on the engineering of a variety of functional materials for improving photoanode efficiency of dye-sensitized solar cells (DSSC). The first two chapters describe operation principles of DSSC, charge transfer dynamics, as well as challenges and solutions for improving DSSCs. The remaining chapters focus on interfacial engineering of functional materials at the photoanode surface to create greater output efficiency. Interfacial Engineering in Functional Materials for Dye-Sensitized Solar Cells begins by introducing readers to the history, configuration, components, and working principles of DSSC It then goes on to cover both nanoarchitectures and light scattering materials as photoanode. Function of compact (blocking) layer in the photoanode and of TiClTable of ContentsList of Contributors xi Preface xv 1 Dye-Sensitized Solar Cells: History, Components, Configuration, and Working Principle 1S.N. Karthick, K.V. Hemalatha, Suresh Kannan Balasingam, F. Manik Clinton, S. Akshaya, and Hee-Je Kim 1.1 Introduction 1 1.2 History of Dye-sensitized Solar Cells 3 1.3 Components of DSSCs 4 1.3.1 Conductive Glass Substrate 4 1.3.2 Photoanode 4 1.3.3 Counter Electrode 4 1.3.4 Electrolytes 6 1.3.4.1 Types of Solvents Used in Electrolytes 6 1.3.4.2 Alternative Redox Mediators 7 1.3.5 Dyes 8 1.4 Configuration of DSSCs 8 1.4.1 Metal Substrates for Photoanode and Glass/TCO for Counter Electrode 8 1.4.2 Metal Substrates for Counter Electrode and Glass/TCO for Photoanode 10 1.4.3 Metal Substrate for Photoanode and Polymer Substrate for Counter Electrode 10 1.4.4 Polymer Substrates for Flexible DSSCs 10 1.4.5 Glass/TCO-Free Metal Substrates for Flexible DSSCs 11 1.4.6 Glass/TCO-Free Metal Wire Substrates for Flexible DSSCs 11 1.5 Working Principle of DSSCs 11 1.5.1 Electron Transfer Mechanism in DSSCs 14 1.5.2 Photoelectric Performance 14 Acknowledgments 15 References 15 2 Function of Photoanode: Charge Transfer Dynamics, Challenges, and Alternative Strategies 17A. Dennyson Savariraj and R.V. Mangalaraja 2.1 Introduction 17 2.2 The General Composition of DSSC 18 2.3 Selection of Substrate for DSSCs 18 2.4 Photoanode 19 2.4.1 Coating Procedure 20 2.4.2 Significance of Using Mesoporous Structure 20 2.5 Sensitizer 20 2.6 Charge Transfer Mechanism 21 2.7 Interfaces 21 2.8 Significance of Dye/Metal Oxide Interface 22 2.9 Factors That Influence Efficiency in DSSC 23 2.9.1 Dye Aggregation 23 2.9.2 Effect of Metal Oxide on the Performance of Metal Oxide/Dye Interface 24 2.9.3 Role of Electronic Structure of Metal Oxides 25 2.10 Kinetics of Operation in DSSCs 26 2.11 Strategies to Improve the Photoanode Performance 28 2.11.1 TiCl4 Treatment 28 2.11.2 Composites 28 2.11.3 Light Scattering 29 2.11.4 Nanoarchitectures 29 2.11.5 Doping 30 2.11.6 Interfacial Engineering 30 2.12 Conclusion 30 Acknowledgments 31 References 31 3 Nanoarchitectures as Photoanodes 35Hari Murthy 3.1 Introduction 35 3.2 DSSC Operation 36 3.3 Nanoarchitectures for Improved Device Performance of Photoanodes 39 3.3.1 TiO2 39 3.3.2 ZnO 51 3.3.3 SnO2 53 3.3.4 Nb2O5 55 3.3.5 Graphene 55 3.3.6 Other Photoanode Materials 56 3.4 Future Outlook and Challenges 65 3.5 Conclusion 66 References 66 4 Light Scattering Materials as Photoanodes 79Rajkumar C and A. Arulraj 4.1 Introduction 79 4.2 Introduction to Light Scattering 79 4.3 Materials for Light Scattering in DSSCs 80 4.4 Early Theoretical Predictions of Light Scattering in DSSCs 82 4.5 Different Light Scattering Materials 85 4.5.1 Mixing of Large Particles into Small Particles 85 4.5.2 Voids as Light Scatters 87 4.5.3 Nano-Composites for Light Scattering 87 4.5.3.1 Nanowire–Nanoparticle Composite 87 4.5.3.2 Nanofiber–Nanoparticle Composite 87 4.5.3.3 SrTiO3 Nanocubes–ZnO Nanoparticle Composite 88 4.5.3.4 Silica Nanosphere–ZnO Nanoparticle Composite 88 4.5.3.5 SnO2 Aggregate–SnO2 Nanosheet Composite 88 4.5.3.6 Ag (4,4′-Dicyanamidobiphenyl) Complex–TiO2 NP Composite 88 4.6 Light Scattering Layers 88 4.6.1 Surface Modified TiO2 Particles in Scattering Layer 88 4.6.2 Dual Functional Materials in DSSC 89 4.6.3 Double-Light Scattering Layer 89 4.6.4 Large Particles as Scattering Layers 89 4.6.4.1 TiO2 Nanotubes 90 4.6.4.2 TiO2 Nanowires 90 4.6.4.3 TiO2 Nanospindles 90 4.6.4.4 TiO2 Nanofibers 90 4.6.4.5 TiO2 Rice Grain Nanostructures 90 4.6.4.6 Nest-Shaped TiO2 Structures 91 4.6.4.7 Nano-Embossed Hollow Spherical TiO2 91 4.6.4.8 Hexagonal TiO2 Plates 91 4.6.4.9 TiO2 Photonic Crystals 91 4.6.4.10 Cubic CeO2 Nanoparticles 94 4.6.4.11 Spherical TiO2 Aggregates 94 4.6.4.12 Hierarchical TiO2 Submicroflowers 94 4.6.4.13 SnO2 Aggregates 94 4.6.4.14 ZnO Nanoflowers 95 4.6.5 Core–Shell Nanoparticles for Light Scattering in DSSCs 95 4.6.6 Double-Layer Photoanode 95 4.6.6.1 TiO2 Aggregates 96 4.6.6.2 Morphology-Controlled 1D–3D Bilayer TiO2 Nanostructures 96 4.6.6.3 Quintuple-Shelled SnO2 Hollow Microspheres 96 4.6.6.4 Carbon-Based Materials for Light Scattering 96 4.6.6.5 3D N-Doped TiO2 Microspheres Used as Scattering Layers 96 4.6.6.6 ZnO Hollow Spheres and Urchin-like TiO2 Microspheres 96 4.6.6.7 SnO2 as Light-Scattering Layer 97 4.6.7 Three-Layer Photoanode 97 4.6.8 Four-Layer Photoanode 97 4.6.9 Surface Plasmon Effect in DSSC 97 4.7 Conclusion 99 References 99 5 Function of Compact (Blocking) Layer in Photoanode 107Su Pei Lim 5.1 Introduction 107 5.2 Titanium Dioxide (TiO2) and Titanium (Ti)-Based Material as a Compact Layer 107 5.3 Zinc Oxide (ZnO) as a Compact Layer 112 5.4 Less Common Metal Oxide as a Compact Layer 117 5.5 Conclusion 118 References 121 6 Function of TiCl4 Posttreatment in Photoanode 125T.S. Senthil and C.R. Kalaiselvi 6.1 Introduction 125 6.2 Role of TiCl4 Posttreatment in Photo-Anode 126 6.3 Effect of Posttreatment of TiCl4 on Various Perspectives 126 6.3.1 TiO2 Morphology, Porosity, and Surface Area 126 6.3.2 Dye Adsorption and Photocurrent Generation 129 6.3.3 Electron Transport and Diffusion Coefficient 132 6.3.4 Recombination Losses at Short Circuit 134 6.3.5 Concentration and Dipping Time of TiCl4 135 6.4 Conclusion 136 References 137 7 Doped Semiconductor as Photoanode 139K. S. Rajni and T. Raguram 7.1 Introduction 139 7.2 Photoanode 140 7.3 Characterization 141 7.4 Doped TiO2 Photoanodes 141 7.4.1 Alkali Earth Metals-doped TiO2 141 7.4.1.1 Lithium-doped TiO2 141 7.4.1.2 Magnesium-doped TiO2 143 7.4.1.3 Calcium-doped TiO2 143 7.4.2 Metalloids-doped TiO2 143 7.4.2.1 Boron-doped TiO2 145 7.4.2.2 Silicon-doped TiO2 145 7.4.2.3 Germanium-doped TiO2 145 7.4.2.4 Antimony-doped TiO2 146 7.4.3 Nonmetals-doped TiO2 146 7.4.3.1 Carbon-doped TiO2 146 7.4.3.2 Nitrogen-doped TiO2 147 7.4.3.3 Fluorine-doped TiO2 147 7.4.3.4 Sulfur-doped TiO2 147 7.4.3.5 Iodine-doped TiO2 148 7.4.4 Transition Metals-doped TiO2 148 7.4.4.1 Scandium-doped TiO2 148 7.4.4.2 Vanadium, Niobium, and Tantalum-doped TiO2 148 7.4.4.3 Chromium-doped TiO2 148 7.4.4.4 Manganese and Cobalt-doped TiO2 150 7.4.4.5 Iron-doped TiO2 150 7.4.4.6 Nickel-doped TiO2 151 7.4.4.7 Copper-doped TiO2 152 7.4.4.8 Zinc-doped TiO2 153 7.4.4.9 Yttrium-doped TiO2 153 7.4.4.10 Zirconium-doped TiO2 154 7.4.4.11 Molybdenum-doped TiO2 154 7.4.4.12 Silver-doped TiO2 155 7.4.5 Post-Transition Metals 155 7.4.5.1 Aluminum-doped TiO2 155 7.4.5.2 Gallium-doped TiO2 155 7.4.5.3 Indium-doped TiO2 155 7.4.5.4 Tin-doped TiO2 156 7.4.6 Lanthanides-doped TiO2 156 7.4.6.1 Lanthanum-doped TiO2 156 7.4.6.2 Cerium-doped TiO2 156 7.4.6.3 Neodymium-doped TiO2 157 7.4.6.4 Samarium-doped TiO2 157 7.4.6.5 Europium-doped TiO2 157 7.4.7 Co-doped TiO2 158 7.4.8 Tri-doped TiO2 158 7.5 Conclusion 158 References 159 8 Binary Semiconductor Metal Oxide as Photoanodes 163S.S. Kanmani, I. John Peter, A. Muthu Kumar, P. Nithiananthi, C. Raja Mohan, and K. Ramachandran 8.1 Why Metal Oxide Semiconductors? 163 8.2 Development of MOS-Based DSSC 164 8.2.1 TiO2/ZnO Core/Shell Configuration 165 8.2.2 Preparation of TiO2/ZnO Core/Shell Nanomaterials 165 8.2.3 TiO2/ZnO Core/Shell Nanomaterials 165 8.2.4 DSSC Performance of TiO2/ZnO Core/Shell Configuration 167 8.3 Importance of Heterostructures 170 8.4 I–V Characteristics 171 8.5 Matching of Bandgaps 171 8.6 Conclusion 189 References 189 9 Plasmonic Nanocomposite as Photoanode 193Su Pei Lim 9.1 Introduction 193 9.2 Plasmonic Nanocomposite Modified TiO2 as Photoanode 193 9.3 Plasmonic Nanocomposite Modified ZnO as Photoanode 197 9.4 Plasmonic Nanocomposite Modified with Less Common Metal Oxide as Photoanode 203 9.5 Conclusion 206 References 206 10 Carbon Nanotubes-Based Nanocomposite as Photoanode 213Giovana R. Cagnani, Nirav Joshi, and Flavio M. Shimizu 10.1 Introduction 213 10.2 Recent Advances on DSSC Photoanodes 215 10.3 Structure and Properties of Carbon Nanotubes 216 10.4 CNT-Based Photoanode Material 218 10.5 Effect of the Morphology and Interface of the CNT Photoanodes on the Efficiency of the DSSC 221 10.6 Summary and Future Prospect 223 Acknowledgment 223 References 223 11 Graphene-Based Nanocomposite as Photoanode 231Subhendu K. Panda, G. Murugadoss, and R. Thangamuthu 11.1 Introduction 231 11.2 Graphene–TiO2 Nanocomposite for Photoanode 232 11.3 Conclusion and Remarks 241 References 242 12 Graphitic Carbon Nitride Based Nanocomposites as Photoanodes 247T.S. Shyju, S. Anandhi, P. Vengatesh, C. Karthik Kumar, and M. Paulraj 12.1 Introduction 247 12.2 Importance of Graphitic Carbon Nitride 248 12.3 Photoanodes for DSSC 250 12.4 Preparation of Graphitic Carbon Nitride 252 12.4.1 Bulk Graphitic Carbon Nitride 253 12.4.2 Mesoporous Graphitic Carbon Nitrides 253 12.4.3 Doping in Graphitic Carbon Nitride 254 12.4.4 Ag Deposited g-C3N4 254 12.4.5 Chemical Doping 254 12.5 Operation Principles of DSSC 255 12.5.1 Nanostructured Graphitic Carbon Nitride in DSSC 257 12.6 Graphitic Carbon Nitride in Polymer Films Solar Cell 259 12.7 Preparation of Carbon Nitride Counter Electrode 259 12.8 Quantum Dot Graphitic Carbon Nitride 260 12.9 Porous Graphitic Carbon Nitride 260 12.10 Summary 260 Acknowledgment 261 References 261 Index 265
£112.46
John Wiley & Sons Inc Photovoltaic PV System Delivery as Reliable
Book SynopsisA practical guide to improving photovoltaic power plant lifecycle performance and output Photovoltaic (PV) System Delivery as Reliable Energy Infrastructure introduces a Preemptive Analytical Maintenance (PAM) for photovoltaic systems engineering, and the Repowering planning approach, as a structured integrated system delivery process. A team of veteran photovoltaics professionals delivers a robust discussion of the lessons learned from mature industriesincluding PV, aerospace, utilities, rail, marine, and automotiveas applied to the photovoltaic industry. The book offers real-world technical and fiscal examples of the impact of photovoltaics to all stakeholders during the concept, specification, operations, maintenance, and Repowering phases. In each chapter, readers will learn to develop RAMS specifications, reliability data collection, and tasks while becoming familiar with the inherent benefits of how these affect the cost of design and development, maintenance, spares, and syste
£97.65