Description
Book SynopsisThis book gives a comprehensive view of the most recent major international research in the field of tolerancing, and is an excellent resource for anyone interested in Computer Aided Tolerating.
It is organized into 4 parts. Part 1 focuses on the more general problems of tolerance analysis and synthesis, for tolerancing in mechanical design and manufacturing processes. Part 2 specifically highlights the simulation of assembly with defects, and the influence of tolerances on the quality of the assembly. Part 3 deals with measurement aspects, and quality control throughout the life cycle. Different measurement technologies and methods for estimating uncertainty are considered. In Part 4, different aspects of tolerancing and their interactions are explored, from the definition of functional requirement to measurement processes in a PLM approach.
Table of ContentsPreface xix
PART I. TOLERANCE ANALYSIS AND SYNTHESIS 1
Chapter 1. A New Method of Expressing Functional Requirements and How to Allocate Tolerance to Parts 3
Pierre-Antoine ADRAGNA and Pascal HERNANDEZ
Chapter 2. A Parametric Approach to Determine Minimum Clearance in Overconstrained Mechanisms 21
Philippe SERRE, Faida M’HENNI and Andre CLEMENT
Chapter 3. Quick GPS: Tolerancing of an Isolated Part 39
Robin CHAVANNE and Bernard ANSELMETTI
Chapter 4. Synthesis and Statistical Analysis for 3D Tolerancing 59
Max GIORDANO, Pascal HERNANDEZ and Dimitri DENIMAL
Chapter 5. Reliability Analysis of the Functional Specification Applied to a Helicopter Gas Turbine 77
Yann LEDOUX, Denis TEISSANDIER and Samir SID-AHMED
Chapter 6. Inertial Tolerancing According to ISO GPS 99
Dimitri DENIMAL, Max GIORDANO, Maurice PILLET and Alain SERGENT
Chapter 7. Tolerance Analysis based on Quantified Constraint Satisfaction Problems 125
Ahmed Jawad QURESHI, Jean-Yves DANTAN, Jerome BRUYERE and Regis BIGOT
Chapter 8. Tolerance Analysis in Manufacturing Using the MMP, Comparison and Evaluation of Three Different Approaches 145
Mojtaba KAMALI NEJAD, Frederic VIGNAT and Francois VILLENEUVE
PART II. SIMULATION OF ASSEMBLIES 173
Chapter 9. A Chronological Framework for Virtual Sheet Metal Assembly Design 175
Johan SEGEBORN, Anders CARLSSON, Johan S. CARLSON and Rikard SODERBERG
Chapter 10. A Method to Optimize Geometric Quality and Motion Feasibility of Assembly Sequences 191
Domenico SPENSIERI, Johan S. CARLSON, Lars LINDKVIST, Robert BOHLIN and Rikard SODERBERG
Chapter 11. Modeling and Simulation of Assembly Constraints in Tolerance Analysis of Rigid Part Assemblies 209
Pasquale FRANCIOSA, Salvatore GERBINO and Stanislao PATALANO
Chapter 12. Tolerance Analysis with detailed Part Modeling 231
Tobias STOLL, Stefan WITTMANN and Harald MEERKAMM
Chapter 13. Assembly Method Comparison Including Form Defect 245
Stephane MORIERE, Jean MAILHE, Jean-Marc LINARES and Jean-Michel SPRAUEL
Chapter 14. Influence of Geometric Defects on Service Life 259
Laurent ZAMPONI, Emmanuel MERMOZ, Jean-Marc LINARES and Jean-Michel SPRAUEL
Chapter 15. GapSpace Multi-dimensional Assembly Analysis 273
Edward MORSE and Xiaobin YOU
PART III. MEASUREMENT 299
Chapter 16. Impact of the Sampling Strategy on Geometrical Checking Uncertainties 301
Jean MAILHE, Jean-Marc LINARES, Jean-Michel SPRAUEL and Jean-Paul RAYNAL
Chapter 17. Predetermination of Measurement Uncertainty in the Application of Computed Tomography 317
Albert WECKENMANN and Philipp KRAMER
Chapter 18. Application of Function Oriented Parameters for Areal Measurements in Surface Engineering 331
Albert WECKENMANN and Ozgur TAN
Chapter 19. Validation of a Reception or Production Control Process by the Inertial Indicator IG 345
Daniel DURET, Maurice PILLET, Alain SERGENT and Dimitri DENIMAL
Chapter 20. Detection of Areas with Critically Reduced Thickness of Formed Sheet Metal Parts Using Two Oppositely Positioned Fringe Projection Systems 355
Albert WECKENMANN and Natasa PETROVIC
Chapter 21. Variability of the Manufacturing Process in the GPS Framework: A Case Study 371
Manuela DE MADDIS and Martina GANDINI
Chapter 22. Virtual CMM-based Sampling Strategy Optimization 385
Giovanni MORONI and Stefano PETRO
Chapter 23. Impact of Workpiece Shape Deviations in Coordinate Metrology 405
Gisela LANZA and Jochen PETERS
Chapter 24. Quality Assurance of Micro-gears via 3D Surface Characterization 419
Gisela LANZA and Benjamin VIERING
PART IV. TOLERANCING IN THE PLM 431
Chapter 25. Geometric Specification at the Beginning of the Product Lifecycle 433
Renaud COSTADOAT, Luc MATHIEU, Hugo FALGARONE and Benoit FRICERO
Chapter 26. Ontological Model of Tolerances for Interoperability in Product Lifecycle 455
Gaurav AMETA and Patrick HOFFMAN
Chapter 27. A PLM-Based Multi-Sensor Integration Measurement System for Geometry Processing 469
Zhao HAIBIN, Nabil ANWER and Pierre BOURDET
Chapter 28. Comparison of Gear Geometric Specification Models Regarding the Functional Aspect 485
Jean-Paul VINCENT, Jean-Yves DANTAN, Gerth GOCH and Regis BIGOT
Chapter 29. Effects of Geometric Variation on Perceived Quality 503
Karin FORSLUND and Rikard SODERBERG
Chapter 30. Geometric Requirement Variations Throughout the Product Lifecycle 521
Guillaume MANDIL, Alain DESROCHERS and Alain RIVIERE
List of Authors 543
Index 549
