Description

Book Synopsis

This issue of the Ceramic Transactions compiles 41 papers covering a rich diversity of the sintering science and technology topics. These papers were presented at the International Conference on Sintering, November 16-20, 2008 in La Jolla, California.

The Ceramic Transactionsseries contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

Table of Contents

Preface xi

Acknowledgements xiii

APPLICATION OF SINTERING IN EMERGING ENERGY APPLICATIONS: FUEL CELLS, SOLAR CELLS, HYDROGEN STORAGE

Sintering Behavior of Ce0 9Gd0 -,0-, 95.8 in Reducing Atmosphere 3
A. Kaiser, J. W. Phair, S. Foghmoes, S. Ramousse, Z. He

Hydrogen Sorption Properties of Ti-Oxide/Chloride Catalyzed Na2LiAIH6 13
Enrique Martinez-Franco, Thomas Klassen, Martin Dornheim, Ruediger Bormann, and David Jaramillo-Vigueras

High Density Green Pellets of ZrN Fabricated by Particle Processing 21
Thomas T. Meek, K. Gwathney, Chaitanya K. Narula, and L.R. Walker

EVOLUTION AND CONTROL OF MICROSTRUCTURE DURING SINTERING PROCESSES

The Effect of Carbon Source on the Microstructure and the Mechanical Properties of Reaction Bonded Boron Carbide 29
S. Hayun, H. Dilman, M. P. Dariel, N. Frage, and S. Dub

Modification of Mass Transport during Sintering Induced by Thermal Gradient 41
Sébastien Saunier and Frangois Valdivieso

FUNDAMENTAL ASPECTS OF SINTERING

Effects of Crystallization and Vitrification on Sintering Properties of Bentonite Clay 53
H. Camacho, CA. Martínez, P.E. García, HJ. Ochoa, J.T. Elizalde, A. García, A. Aguilar, M. Bocanegra, and C. Domínguez

Dissolution of Alumina in Silicate Glasses and the Glass Formation Boundary 61
Keith J. DeCarlo, Thomas F. Lam, and William M. Carty

The Effect of Volume Fraction on Grain Growth during Liquid Phase Sintering of Tungsten Heavy Alloys 71
John L. Johnson, Louis G. Campbell, Seong Jin Park, and Randall M. German

IN-SITU MEASUREMENTS IN SINTERING

In-Situ Investigation of the Cooperative Material Transport during the Early Stage of Sintering by Synchrotron X-Ray Computed Tomography 85
R. Grupp, M. Nöthe, B. Kieback, and J. Banhart

Geopolymers Sintering by Optical Dilatometry 91
Elie Kamseu, Cristina Leonelli, and Dan S. Perera

MODELING OF SINTERING AT MULTIPLE SCALES

Meso-Scale Monte Carlo Sintering Simulation with Anisotropie Grain Growth 103
Gordon Brown, Richard Levine, Veena Tikare, and Eugene Olevsky

Numerical Simulation of Densification and Shape Distortion of Porous Bodies in a Granular-Transmitting Medium 113
Junkun Ma and Eugene A. Olevsky

The Effect of a Substrate on the Microstructure of Particulate Films 125
C.L. Martin and R. K. Bordia

Modelling Constrained Sintering and Cracking 135
Ruoyu Huang and Jingzhe Pan

Atomistic Scale Study on Effect of Crystalline Misalignment on Densification during Sintering Nano Scale Tungsten Powder 149
Amitava Moitra, Sungho Kim, Seong-Gon Kim, Seong Jin Park, Randall German,and Mark F. Horstemeyer

Variations in Sintering Stress and Viscosity with Mixing Ratio of Metal/Ceramic Powders 161
Kazunari Shinagawa

NOVEL SINTERING PROCESSES: FIELD-ASSISTED SINTERING TECHNIQUES

Finite Element Modelling of Microwave Sintering 173
D. Bouvard, S. Charmond, and C.P. Carry

Direct and Hybrid Microwave Sintering of Yttria-Doped Zirconia in a Single-Mode Cavity 181
S. Charmond, C. P. Carry, and D. Bouvard

The Influence of Minor Additives on Densification and Microstructure of Submicrometer Alumina Ceramics Prepared by SPS and HIP 193
Jaroslav Sedlácek, Monika Michálková, Deniz Karaman, Dusan Galusek, and Michael Hoffmann

The Electro-Discharge Compaction of Powder Tungsten Carbide-Cobalt-Diamond Composite Material 205
Evgeny G. Grigoryev and Alexander V. Rosliakov

Microwave Sintering Explored by X-Ray Microtomography 211
Kotaro Ishizakl, Manjusha Battabyal, Yoko Yamada Pittini, Radu Nicula, and Sebastien Vaucher

Pulse Plasma Sintering and Applications 219
Andrzej Michalski and Marcin Rosinski

Influence of Electric Fields during the Field Assisted Sintering Technique (FAST) 227
Michaela Müller and Rolf Ciasen

Sintering of Combustion Synthesized TiB2-Zr02 Composite Powders in Conventional and Microwave Furnaces 237
Hayk Khachatryan, Alok Vats, Zachary Doorenbos, Suren Kharatyan, and Jan A. Puszynski

Production and Characterization of WC-Co Cemented Carbides by Field Assisted Sintering 249
Rafet Emre Özüdogru, Filiz Cinar Sahin, and Onuralp Yucel

Microwave Rapid Debinding and Sintering of MIM/CIM Parts 259
P. Veronesi, C.Leonelli, G. Poli, L. Denti, and A. Gatto

SINTERING OF BIOMATERIALS

Analysis of Sintering of Titanium Porous Material Processed by the Space Holder Method 273
L. Reig, V. Amigó, D. Busquéis, M.D. Salvador and J.A. Calero

Effect of Sintering Temperature and Time on Microstructure and Properties of Zirconla Toughened Alumina (ZTA) 283
M. M. Hasan and F. Islam

Sintering Zirconia for Dental CAD/CAM Technology 291
Kuljira Sujirote, Sukunthakan Ngernbamrung, Kannigar Dateraksa, Tossapol Chunkiri, Marut Wongcumchang, and Kriskrai Sitthiseripratip

SINTERING OF MULTI-MATERIAL AND MULTI-LAYERED SYSTEMS

Co-Sintering Behaviors of Oxide Based Bl-Materials 307
Claude Carry, Emre Yalamag, and Sedat Akkurt

Coupling between Sintering and Liquid Migration to Process Tungsten-Copper Functionally Graded Materials 321
J.-J. Raharijaona, J.-M. Missiaen, and R. Mitteau

Laser Sintering of Nanosized Alumina Powder for Scratch Resistant Transparent Coatings 333
Christoph Rivinius and Rolf Ciasen

Optimization of Density, Microstructure and Interface Region in a Co-Sintered (Steel/Cemented Carbide) Bi-Layered Material 343
A. Thomazlc, C. Pascal, J.M. Chaix

SINTERING OF NANOSTRUCTURED MATERIALS

MoSi2 Formation Mechanisms during a Spark Plasma Synthesis from Mechanically Activated Powder Mixture 357
F. Bernard, G. Cabouro, S. Le Gallet, S. Chevalier, E. Gaffet, and Yu Grin

Spark Plasma Sintering of Nanocrystalline WC-12Co Cermets 367
Victoria Bonache, Maria Dolores Salvador, Vicente Amigo, David Busquéis, and Alicia Castro

Si3N4/SiC Materials Based on Preceramic Polymers and Ceramic 379
Powder 379
U. Degenhardt, G. Motz, W. Krenkel, F. Stegner, K. Berroth, W. Harrer, and R. Danzer

Grain Growth during Sintering of Nanosized Particles 389
Z. Zak Fang, Hongtao Wang, Xu Wang, and Vineet Kumar

Atomic Investigation of Thermal Stability of Nanosized Ceria Particles on Metal Oxide Surfaces 401
W. Jiang, M. Wong, A.R. Rammohan, Y. Jiang, and J.L. Williams

Two-Step Sintering of Molybdenum Nanopowder 415
Min Suh Park, Tae Sun Jo, Se Hoon Kim, Dae-Gun Kim, and Young Do Kim

Standard and Two-Stage Sintering of a Submicrometer Alumina Powder: The Influence on the Sintering Trajectory 421
M. Michálková, K. Ghillányová, and D. Galusek

SAXS Investigation of the Sintered Niobium Powder: Method of Stabilizing Porosity and Fractal Properties 429
Leonid Skatkov

Author Index 437

Advances in Sintering Science and Technology

    Product form

    £125.96

    Includes FREE delivery

    RRP £139.95 – you save £13.99 (9%)

    Order before 4pm tomorrow for delivery by Mon 22 Jun 2026.

    A Hardback by Bordia, Rajendra Bordia


      View other formats and editions of Advances in Sintering Science and Technology by Bordia

      Publisher: Wiley
      Publication Date: 28/01/2010
      ISBN13: 9780470408490, 978-0470408490
      ISBN10:

      Description

      Book Synopsis

      This issue of the Ceramic Transactions compiles 41 papers covering a rich diversity of the sintering science and technology topics. These papers were presented at the International Conference on Sintering, November 16-20, 2008 in La Jolla, California.

      The Ceramic Transactionsseries contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

      Table of Contents

      Preface xi

      Acknowledgements xiii

      APPLICATION OF SINTERING IN EMERGING ENERGY APPLICATIONS: FUEL CELLS, SOLAR CELLS, HYDROGEN STORAGE

      Sintering Behavior of Ce0 9Gd0 -,0-, 95.8 in Reducing Atmosphere 3
      A. Kaiser, J. W. Phair, S. Foghmoes, S. Ramousse, Z. He

      Hydrogen Sorption Properties of Ti-Oxide/Chloride Catalyzed Na2LiAIH6 13
      Enrique Martinez-Franco, Thomas Klassen, Martin Dornheim, Ruediger Bormann, and David Jaramillo-Vigueras

      High Density Green Pellets of ZrN Fabricated by Particle Processing 21
      Thomas T. Meek, K. Gwathney, Chaitanya K. Narula, and L.R. Walker

      EVOLUTION AND CONTROL OF MICROSTRUCTURE DURING SINTERING PROCESSES

      The Effect of Carbon Source on the Microstructure and the Mechanical Properties of Reaction Bonded Boron Carbide 29
      S. Hayun, H. Dilman, M. P. Dariel, N. Frage, and S. Dub

      Modification of Mass Transport during Sintering Induced by Thermal Gradient 41
      Sébastien Saunier and Frangois Valdivieso

      FUNDAMENTAL ASPECTS OF SINTERING

      Effects of Crystallization and Vitrification on Sintering Properties of Bentonite Clay 53
      H. Camacho, CA. Martínez, P.E. García, HJ. Ochoa, J.T. Elizalde, A. García, A. Aguilar, M. Bocanegra, and C. Domínguez

      Dissolution of Alumina in Silicate Glasses and the Glass Formation Boundary 61
      Keith J. DeCarlo, Thomas F. Lam, and William M. Carty

      The Effect of Volume Fraction on Grain Growth during Liquid Phase Sintering of Tungsten Heavy Alloys 71
      John L. Johnson, Louis G. Campbell, Seong Jin Park, and Randall M. German

      IN-SITU MEASUREMENTS IN SINTERING

      In-Situ Investigation of the Cooperative Material Transport during the Early Stage of Sintering by Synchrotron X-Ray Computed Tomography 85
      R. Grupp, M. Nöthe, B. Kieback, and J. Banhart

      Geopolymers Sintering by Optical Dilatometry 91
      Elie Kamseu, Cristina Leonelli, and Dan S. Perera

      MODELING OF SINTERING AT MULTIPLE SCALES

      Meso-Scale Monte Carlo Sintering Simulation with Anisotropie Grain Growth 103
      Gordon Brown, Richard Levine, Veena Tikare, and Eugene Olevsky

      Numerical Simulation of Densification and Shape Distortion of Porous Bodies in a Granular-Transmitting Medium 113
      Junkun Ma and Eugene A. Olevsky

      The Effect of a Substrate on the Microstructure of Particulate Films 125
      C.L. Martin and R. K. Bordia

      Modelling Constrained Sintering and Cracking 135
      Ruoyu Huang and Jingzhe Pan

      Atomistic Scale Study on Effect of Crystalline Misalignment on Densification during Sintering Nano Scale Tungsten Powder 149
      Amitava Moitra, Sungho Kim, Seong-Gon Kim, Seong Jin Park, Randall German,and Mark F. Horstemeyer

      Variations in Sintering Stress and Viscosity with Mixing Ratio of Metal/Ceramic Powders 161
      Kazunari Shinagawa

      NOVEL SINTERING PROCESSES: FIELD-ASSISTED SINTERING TECHNIQUES

      Finite Element Modelling of Microwave Sintering 173
      D. Bouvard, S. Charmond, and C.P. Carry

      Direct and Hybrid Microwave Sintering of Yttria-Doped Zirconia in a Single-Mode Cavity 181
      S. Charmond, C. P. Carry, and D. Bouvard

      The Influence of Minor Additives on Densification and Microstructure of Submicrometer Alumina Ceramics Prepared by SPS and HIP 193
      Jaroslav Sedlácek, Monika Michálková, Deniz Karaman, Dusan Galusek, and Michael Hoffmann

      The Electro-Discharge Compaction of Powder Tungsten Carbide-Cobalt-Diamond Composite Material 205
      Evgeny G. Grigoryev and Alexander V. Rosliakov

      Microwave Sintering Explored by X-Ray Microtomography 211
      Kotaro Ishizakl, Manjusha Battabyal, Yoko Yamada Pittini, Radu Nicula, and Sebastien Vaucher

      Pulse Plasma Sintering and Applications 219
      Andrzej Michalski and Marcin Rosinski

      Influence of Electric Fields during the Field Assisted Sintering Technique (FAST) 227
      Michaela Müller and Rolf Ciasen

      Sintering of Combustion Synthesized TiB2-Zr02 Composite Powders in Conventional and Microwave Furnaces 237
      Hayk Khachatryan, Alok Vats, Zachary Doorenbos, Suren Kharatyan, and Jan A. Puszynski

      Production and Characterization of WC-Co Cemented Carbides by Field Assisted Sintering 249
      Rafet Emre Özüdogru, Filiz Cinar Sahin, and Onuralp Yucel

      Microwave Rapid Debinding and Sintering of MIM/CIM Parts 259
      P. Veronesi, C.Leonelli, G. Poli, L. Denti, and A. Gatto

      SINTERING OF BIOMATERIALS

      Analysis of Sintering of Titanium Porous Material Processed by the Space Holder Method 273
      L. Reig, V. Amigó, D. Busquéis, M.D. Salvador and J.A. Calero

      Effect of Sintering Temperature and Time on Microstructure and Properties of Zirconla Toughened Alumina (ZTA) 283
      M. M. Hasan and F. Islam

      Sintering Zirconia for Dental CAD/CAM Technology 291
      Kuljira Sujirote, Sukunthakan Ngernbamrung, Kannigar Dateraksa, Tossapol Chunkiri, Marut Wongcumchang, and Kriskrai Sitthiseripratip

      SINTERING OF MULTI-MATERIAL AND MULTI-LAYERED SYSTEMS

      Co-Sintering Behaviors of Oxide Based Bl-Materials 307
      Claude Carry, Emre Yalamag, and Sedat Akkurt

      Coupling between Sintering and Liquid Migration to Process Tungsten-Copper Functionally Graded Materials 321
      J.-J. Raharijaona, J.-M. Missiaen, and R. Mitteau

      Laser Sintering of Nanosized Alumina Powder for Scratch Resistant Transparent Coatings 333
      Christoph Rivinius and Rolf Ciasen

      Optimization of Density, Microstructure and Interface Region in a Co-Sintered (Steel/Cemented Carbide) Bi-Layered Material 343
      A. Thomazlc, C. Pascal, J.M. Chaix

      SINTERING OF NANOSTRUCTURED MATERIALS

      MoSi2 Formation Mechanisms during a Spark Plasma Synthesis from Mechanically Activated Powder Mixture 357
      F. Bernard, G. Cabouro, S. Le Gallet, S. Chevalier, E. Gaffet, and Yu Grin

      Spark Plasma Sintering of Nanocrystalline WC-12Co Cermets 367
      Victoria Bonache, Maria Dolores Salvador, Vicente Amigo, David Busquéis, and Alicia Castro

      Si3N4/SiC Materials Based on Preceramic Polymers and Ceramic 379
      Powder 379
      U. Degenhardt, G. Motz, W. Krenkel, F. Stegner, K. Berroth, W. Harrer, and R. Danzer

      Grain Growth during Sintering of Nanosized Particles 389
      Z. Zak Fang, Hongtao Wang, Xu Wang, and Vineet Kumar

      Atomic Investigation of Thermal Stability of Nanosized Ceria Particles on Metal Oxide Surfaces 401
      W. Jiang, M. Wong, A.R. Rammohan, Y. Jiang, and J.L. Williams

      Two-Step Sintering of Molybdenum Nanopowder 415
      Min Suh Park, Tae Sun Jo, Se Hoon Kim, Dae-Gun Kim, and Young Do Kim

      Standard and Two-Stage Sintering of a Submicrometer Alumina Powder: The Influence on the Sintering Trajectory 421
      M. Michálková, K. Ghillányová, and D. Galusek

      SAXS Investigation of the Sintered Niobium Powder: Method of Stabilizing Porosity and Fractal Properties 429
      Leonid Skatkov

      Author Index 437

      Recently viewed products

      © 2026 Book Curl

        • American Express
        • Apple Pay
        • Diners Club
        • Discover
        • Google Pay
        • Maestro
        • Mastercard
        • PayPal
        • Shop Pay
        • Union Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account