{"product_id":"process-fan-and-compressor-selection-imeche-guides-for-the-process-industries-9780852988251","title":"Process Fan and Compressor Selection IMechE","description":"\u003cb\u003eBook Synopsis\u003c\/b\u003e\u003cbr\u003eA source of information for engineers who are involved in the specification, design, manufacture, selection and procurement of fans and compressors. The book is a practical guide to the selection process and draws on hundreds of examples compiled from the experiences of plant users and designers.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTable of Contents\u003c\/b\u003e\u003cbr\u003ePreface.  \u003cp\u003e Acknowledgements.  \u003c\/p\u003e\u003cp\u003e Biographical Notes.  \u003c\/p\u003e\u003cp\u003e Notation.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003ePART ONE. INTRODUCTION AND PRELIMINARY SELECTION.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 1. Introduction.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 1.1 The Purpose of the Guide.  \u003c\/p\u003e\u003cp\u003e 1.2 The Philosophy of Selection.  \u003c\/p\u003e\u003cp\u003e 1.3 Design Procedure.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 2. Preliminary Choice of Fan o0r Compressor Type.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 2.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 2.2 Establishing the Duty.  \u003c\/p\u003e\u003cp\u003e 2.3 Preliminary Choice of Fan or Compressor Type.  \u003c\/p\u003e\u003cp\u003e 2.4 Fan and Compressor Applications.  \u003c\/p\u003e\u003cp\u003e 2.5 Provision of Installed Spares.  \u003c\/p\u003e\u003cp\u003e 2.6 Estimate of Costs.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003ePART TWO. TOTO-DYNAMIC MACHINES.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e Foreword to Roto-Dynamic Machines.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 3. Fans.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 3.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 3.2 Basic Data.  \u003c\/p\u003e\u003cp\u003e 3.3 Margins.  \u003c\/p\u003e\u003cp\u003e 3.4 Design Point.  \u003c\/p\u003e\u003cp\u003e 3.5 Factors Affecting Centrifugal Fan Selection.  \u003c\/p\u003e\u003cp\u003e 3.6 Axial Fans.  \u003c\/p\u003e\u003cp\u003e 3.7 Control.  \u003c\/p\u003e\u003cp\u003e 3.8 Selecting a Fan.  \u003c\/p\u003e\u003cp\u003e 3.9 Power.  \u003c\/p\u003e\u003cp\u003e 3.10 Drivers.  \u003c\/p\u003e\u003cp\u003e 3.11 Casing.  \u003c\/p\u003e\u003cp\u003e 3.12 Ducting.  \u003c\/p\u003e\u003cp\u003e 3.13 Materials.  \u003c\/p\u003e\u003cp\u003e 3.14 Noise.  \u003c\/p\u003e\u003cp\u003e 3.15 Example.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 4. Centrifugal Compressors.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 4.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 4.2 Characteristic.  \u003c\/p\u003e\u003cp\u003e 4.3 Establish Duties.  \u003c\/p\u003e\u003cp\u003e 4.4 Compressor Configuration.  \u003c\/p\u003e\u003cp\u003e 4.5 Essential Data.  \u003c\/p\u003e\u003cp\u003e 4.6 Tip Speed.  \u003c\/p\u003e\u003cp\u003e 4.7 Flow Coefficient.  \u003c\/p\u003e\u003cp\u003e 4.8 Diameter and Shaft Speed.  \u003c\/p\u003e\u003cp\u003e 4.9 Polytropic Index.  \u003c\/p\u003e\u003cp\u003e 4.10 Total Head.  \u003c\/p\u003e\u003cp\u003e 4.11 Pressure Coefficient.  \u003c\/p\u003e\u003cp\u003e 4.12 Stage Head.  \u003c\/p\u003e\u003cp\u003e 4.13 Number of Impellers\/Casings.  \u003c\/p\u003e\u003cp\u003e 4.14 Discharge Temperature.  \u003c\/p\u003e\u003cp\u003e 4.15 Intercooling.  \u003c\/p\u003e\u003cp\u003e 4.16 Discharge Volume.  \u003c\/p\u003e\u003cp\u003e 4.17 Power.  \u003c\/p\u003e\u003cp\u003e 4.18 Compressor Characteristic.  \u003c\/p\u003e\u003cp\u003e 4.19 Anti-surge.  \u003c\/p\u003e\u003cp\u003e 4.20 Rotating Stall.  \u003c\/p\u003e\u003cp\u003e 4.21 Control.  \u003c\/p\u003e\u003cp\u003e 4.22 Operation.  \u003c\/p\u003e\u003cp\u003e 4.23 Rotor Dynamics.  \u003c\/p\u003e\u003cp\u003e 4.24 Shafts.  \u003c\/p\u003e\u003cp\u003e 4.25 Impellers.  \u003c\/p\u003e\u003cp\u003e 4.26 Seals.  \u003c\/p\u003e\u003cp\u003e 4.27 Bearings.  \u003c\/p\u003e\u003cp\u003e 4.28 Axial Unbalance and Bearings.  \u003c\/p\u003e\u003cp\u003e 4.29 Casings.  \u003c\/p\u003e\u003cp\u003e 4.30 Vessels.  \u003c\/p\u003e\u003cp\u003e 4.31 Instrumentation.  \u003c\/p\u003e\u003cp\u003e 4.32 Safety and Availability.  \u003c\/p\u003e\u003cp\u003e 4.33 Couplings.  \u003c\/p\u003e\u003cp\u003e 4.34 Layout.  \u003c\/p\u003e\u003cp\u003e 4.35 Drivers.  \u003c\/p\u003e\u003cp\u003e 4.36 Example.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 5. Axial Compressors.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 5.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 5.2 Characteristic.  \u003c\/p\u003e\u003cp\u003e 5.3 Establish Duty.  \u003c\/p\u003e\u003cp\u003e 5.4 Design of Axial Stage.  \u003c\/p\u003e\u003cp\u003e 5.5 Essential Data.  \u003c\/p\u003e\u003cp\u003e 5.6 Arrangement.  \u003c\/p\u003e\u003cp\u003e 5.7 Sizing.  \u003c\/p\u003e\u003cp\u003e 5.8 Control.  \u003c\/p\u003e\u003cp\u003e 5.9 Surging.  \u003c\/p\u003e\u003cp\u003e 5.10 Casing.  \u003c\/p\u003e\u003cp\u003e 5.11 Overall Dimensions.  \u003c\/p\u003e\u003cp\u003e 5.12 Drivers.  \u003c\/p\u003e\u003cp\u003e 5.13 Example.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003ePART THREE. POSITIVE DISPLACEMENT MACHINES.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 6. Reciprocating Compressors.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 6.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 6.2 General Description.  \u003c\/p\u003e\u003cp\u003e 6.3 Basic Process Data.  \u003c\/p\u003e\u003cp\u003e 6.4 Number of Compressors.  \u003c\/p\u003e\u003cp\u003e 6.5 Basic Design.  \u003c\/p\u003e\u003cp\u003e 6.6 Throughput Control.  \u003c\/p\u003e\u003cp\u003e 6.7 Number of Stages—Control Included.  \u003c\/p\u003e\u003cp\u003e 6.8 Configuration.  \u003c\/p\u003e\u003cp\u003e 6.9 Mean Piston Speed.  \u003c\/p\u003e\u003cp\u003e 6.10 Frame Size.  \u003c\/p\u003e\u003cp\u003e 6.11 Cylinder Design.  \u003c\/p\u003e\u003cp\u003e 6.12 Volumetric Efficiency.  \u003c\/p\u003e\u003cp\u003e 6.13 Piston Diameter.  \u003c\/p\u003e\u003cp\u003e 6.14 Number of Cylinder Per Stage.  \u003c\/p\u003e\u003cp\u003e 6.15 Compressor Valves.  \u003c\/p\u003e\u003cp\u003e 6.16 Bearings and Lubrication.  \u003c\/p\u003e\u003cp\u003e 6.17 Piston and Rider Rings.  \u003c\/p\u003e\u003cp\u003e 6.18 Piston Glands.  \u003c\/p\u003e\u003cp\u003e 6.19 Crankcase.  \u003c\/p\u003e\u003cp\u003e 6.20 Materials.  \u003c\/p\u003e\u003cp\u003e 6.21 Vessels.  \u003c\/p\u003e\u003cp\u003e 6.22 Instrumentation.  \u003c\/p\u003e\u003cp\u003e 6.23 Layout.  \u003c\/p\u003e\u003cp\u003e 6.24 Noise.  \u003c\/p\u003e\u003cp\u003e 6.25 Safety.  \u003c\/p\u003e\u003cp\u003e 6.26 Drivers.  \u003c\/p\u003e\u003cp\u003e 6.27 Other Considerations.  \u003c\/p\u003e\u003cp\u003e 6.28 Operation.  \u003c\/p\u003e\u003cp\u003e 6.29 Other Types of Reciprocating Compressors.  \u003c\/p\u003e\u003cp\u003e 6.30 Example.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 7. Twin Screw Compressors—General.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 7.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 7.2 Operation.  \u003c\/p\u003e\u003cp\u003e 7.3 Range and Capacity.  \u003c\/p\u003e\u003cp\u003e 7.4 Pressure.  \u003c\/p\u003e\u003cp\u003e 7.5 Volume Ratio.  \u003c\/p\u003e\u003cp\u003e 7.6 Design Details.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 8. Oil-Free Twin Screw Compressors.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 8.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 8.2 Application.  \u003c\/p\u003e\u003cp\u003e 8.3 Staging.  \u003c\/p\u003e\u003cp\u003e 8.4 Clearances.  \u003c\/p\u003e\u003cp\u003e 8.5 Discharge Temperature (t2).  \u003c\/p\u003e\u003cp\u003e 8.6 Selecting the Right Size.  \u003c\/p\u003e\u003cp\u003e 8.7 Control Requirements.  \u003c\/p\u003e\u003cp\u003e 8.8 Power.  \u003c\/p\u003e\u003cp\u003e 8.9 Temperature.  \u003c\/p\u003e\u003cp\u003e 8.10 Noise.  \u003c\/p\u003e\u003cp\u003e 8.11 Noise Attenuation.  \u003c\/p\u003e\u003cp\u003e 8.12 Layout.  \u003c\/p\u003e\u003cp\u003e 8.13 Gas Contamination.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 9. Oil-Injected Twin Screw Compressors.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 9.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 9.2 Application.  \u003c\/p\u003e\u003cp\u003e 9.3 Staging.  \u003c\/p\u003e\u003cp\u003e 9.4 Clearances.  \u003c\/p\u003e\u003cp\u003e 9.5 Discharge Temperature (td).  \u003c\/p\u003e\u003cp\u003e 9.6 Selecting the Right Size.  \u003c\/p\u003e\u003cp\u003e 9.7 Control.  \u003c\/p\u003e\u003cp\u003e 9.8 Economiser.  \u003c\/p\u003e\u003cp\u003e 9.9 Mechanical Details.  \u003c\/p\u003e\u003cp\u003e 9.10 Compound Two-Stage Compressors.  \u003c\/p\u003e\u003cp\u003e 9.11 Contamination.  \u003c\/p\u003e\u003cp\u003e 9.12 Noise.  \u003c\/p\u003e\u003cp\u003e 9.13 Compressor Module Layout.  \u003c\/p\u003e\u003cp\u003e 9.14 Compressor Module Scope of Supply.  \u003c\/p\u003e\u003cp\u003e 9.15 Lubricants.  \u003c\/p\u003e\u003cp\u003e 9.16 Oil Carryover.  \u003c\/p\u003e\u003cp\u003e 9.17 Oil-from-gas Separation.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 10. Positive Displacement Blowers.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 10.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 10.2 Operation.  \u003c\/p\u003e\u003cp\u003e 10.3 Application.  \u003c\/p\u003e\u003cp\u003e 10.4 Range.  \u003c\/p\u003e\u003cp\u003e 10.5 Swept Volume.  \u003c\/p\u003e\u003cp\u003e 10.3 Efficiencies.  \u003c\/p\u003e\u003cp\u003e 10.7 Tip Speed.  \u003c\/p\u003e\u003cp\u003e 10.8 Pressure Rating.  \u003c\/p\u003e\u003cp\u003e 10.9 Clearances.  \u003c\/p\u003e\u003cp\u003e 10.10 Discharge Temperature.  \u003c\/p\u003e\u003cp\u003e 10.11 Control.  \u003c\/p\u003e\u003cp\u003e 10.12 Power.  \u003c\/p\u003e\u003cp\u003e 10.13 Scope of Supply.  \u003c\/p\u003e\u003cp\u003e 10.14 Materials of Construction.  \u003c\/p\u003e\u003cp\u003e 10.15 Gas Contamination.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 11. Rotary, Sliding Vane Compressors.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 11.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 11.2 Operation.  \u003c\/p\u003e\u003cp\u003e 11.3 Applications.  \u003c\/p\u003e\u003cp\u003e 11.4 Built in Volume-ratio.  \u003c\/p\u003e\u003cp\u003e 11.5 Pressure Ratio.  \u003c\/p\u003e\u003cp\u003e 11.6 Discharge Temperature.  \u003c\/p\u003e\u003cp\u003e 11.7 Swept Volume.  \u003c\/p\u003e\u003cp\u003e 11.8 Discharge Pressure Rating.  \u003c\/p\u003e\u003cp\u003e 11.9 Rotor Tip Speed.  \u003c\/p\u003e\u003cp\u003e 11.10 Vane Compressor Package.  \u003c\/p\u003e\u003cp\u003e 11.11 Materials of Construction.  \u003c\/p\u003e\u003cp\u003e 11.12 Gas Contamination.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003ePART FOUR. COMMON FEATURES.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 12. Drivers and Transmissions.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 12.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 12.2 Factors Influencing Driver Selection.  \u003c\/p\u003e\u003cp\u003e 12.3 Motors.  \u003c\/p\u003e\u003cp\u003e 12.4 Steam Turbines.  \u003c\/p\u003e\u003cp\u003e 12.5 Gas Turbines.  \u003c\/p\u003e\u003cp\u003e 12.6 Engines.  \u003c\/p\u003e\u003cp\u003e 12.7 Gas Expanders.  \u003c\/p\u003e\u003cp\u003e 12.8 Driver Specification.  \u003c\/p\u003e\u003cp\u003e 12.9 Gearbox Selection.  \u003c\/p\u003e\u003cp\u003e 12.10 Shaft Coupling Characteristics.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 13. Lubrication.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 13.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 13.2 Duty.  \u003c\/p\u003e\u003cp\u003e 13.3 Oil Unit.  \u003c\/p\u003e\u003cp\u003e 13.4 Oil.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 14. Seals for Rotary Machines.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 14.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 14.2 Labyrinth Seals.  \u003c\/p\u003e\u003cp\u003e 14.3 Positive Seals.  \u003c\/p\u003e\u003cp\u003e 14.4 Other Seals.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 15. Inspection and Testing.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 15.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 15.2 Design Audit.  \u003c\/p\u003e\u003cp\u003e 15.3 Inspection.  \u003c\/p\u003e\u003cp\u003e 15.4 Mechanical Test.  \u003c\/p\u003e\u003cp\u003e 15.5 Performance Test.  \u003c\/p\u003e\u003cp\u003e 15.6 String Test.  \u003c\/p\u003e\u003cp\u003e 15.7 Recommendation.  \u003c\/p\u003e\u003cp\u003e \u003cb\u003eChapter 16. Containment Safety.\u003c\/b\u003e  \u003c\/p\u003e\u003cp\u003e 16.1 Introduction.  \u003c\/p\u003e\u003cp\u003e 16.2 Gas Containment.  \u003c\/p\u003e\u003cp\u003e 16.3 Parts Containment.  \u003c\/p\u003e\u003cp\u003e 16.4 Monitoring.  \u003c\/p\u003e\u003cp\u003e Appendix I. Mechanical Data Sheets.  \u003c\/p\u003e\u003cp\u003e Appendix II. Properties of Gas Mixtures.  \u003c\/p\u003e\u003cp\u003e Bibliography.  \u003c\/p\u003e\u003cp\u003e Index. \u003c\/p\u003e","brand":"John Wiley \u0026 Sons Inc","offers":[{"title":"Default Title","offer_id":49406261363031,"sku":"9780852988251","price":154.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/1739\/5799\/files\/9780852988251.jpg?v=1730495143","url":"https:\/\/bookcurl.com\/products\/process-fan-and-compressor-selection-imeche-guides-for-the-process-industries-9780852988251","provider":"Book Curl","version":"1.0","type":"link"}