{"product_id":"hybrid-micromachining-and-microfabrication-technologies-9781394174478","title":"Hybrid Micromachining and Microfabrication","description":"\u003cb\u003eBook Synopsis\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eHYBRID MICROMACHINING and MICROFABRICATION TECHNOLOGIES\u003c\/b\u003e \u003cp\u003e\u003cb\u003eThe book aims to provide a thorough understanding of numerous advanced hybrid micromachining and microfabrication techniques as well as future directions, providing researchers and engineers who work in hybrid micromachining with a much-appreciated orientation.\u003c\/b\u003e \u003c\/p\u003e\u003cp\u003eThe book is dedicated to advanced hybrid micromachining and microfabrication technologies by detailing principals, techniques, processes, conditions, research advances, research challenges, and opportunities for various types of advanced hybrid micromachining and microfabrication. It discusses the mechanisms of material removal supported by experimental validation. Constructional features of hybrid micromachining setup suitable for industrial micromachining applications are explained. Separate chapters are devoted to different advanced hybrid micromachining and microfabrication to design and development of micro-tools, which is one of the most vital comp\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTable of Contents\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003ePreface xv\u003c\/p\u003e \u003cp\u003eAcknowledgement xix\u003c\/p\u003e \u003cp\u003e\u003cb\u003e1 Overview of Hybrid Micromachining and Microfabrication Techniques 1\u003cbr\u003e \u003c\/b\u003e\u003ci\u003eSandip Kunar, Akhilesh Kumar Singh, Devarapalli Raviteja, Golam Kibria, Prasenjit Chatterjee, Asma Perveen and Norfazillah Talib\u003c\/i\u003e\u003c\/p\u003e \u003cp\u003e1.1 Introduction 2\u003c\/p\u003e \u003cp\u003e1.2 Classification of Hybrid Micromachining and Microfabrication Techniques 3\u003c\/p\u003e \u003cp\u003e1.2.1 Compound Processes 4\u003c\/p\u003e \u003cp\u003e1.2.2 Methods Aided by Various Energy Sources 6\u003c\/p\u003e \u003cp\u003e1.2.3 Processing Using a Hybrid Tool 9\u003c\/p\u003e \u003cp\u003e1.3 Challenges in Hybrid Micromachining 9\u003c\/p\u003e \u003cp\u003e1.4 Conclusions 10\u003c\/p\u003e \u003cp\u003e1.5 Future Research Opportunities 11\u003c\/p\u003e \u003cp\u003eReferences 11\u003c\/p\u003e \u003cp\u003e\u003cb\u003e2 A Review on Experimental Studies in Electrochemical Discharge Machining 17\u003cbr\u003e \u003c\/b\u003e\u003ci\u003ePravin Pawar, Amaresh Kumar and Raj Ballav\u003c\/i\u003e\u003c\/p\u003e \u003cp\u003e2.1 Introduction 17\u003c\/p\u003e \u003cp\u003e2.2 Historical Background 18\u003c\/p\u003e \u003cp\u003e2.3 Principle of Electrochemical Discharge Machining Process 20\u003c\/p\u003e \u003cp\u003e2.4 Basic Mechanism of Electrochemical Discharge Machining Process 20\u003c\/p\u003e \u003cp\u003e2.5 Application of ECDM Process 23\u003c\/p\u003e \u003cp\u003e2.6 Literature Review on ECDM 23\u003c\/p\u003e \u003cp\u003e2.6.1 Literature Review on Theoretical Modeling 23\u003c\/p\u003e \u003cp\u003e2.6.2 Literature Review on Internal Behavioral Studies 27\u003c\/p\u003e \u003cp\u003e2.6.3 Literature Review on Design of ECDM 30\u003c\/p\u003e \u003cp\u003e2.6.4 Literature Review on Workpiece Materials Used in ECDM 33\u003c\/p\u003e \u003cp\u003e2.6.5 Literature Review on Tooling Materials and Its Design in ECDM 36\u003c\/p\u003e \u003cp\u003e2.6.6 Literature Review on Electrolyte Chemicals Used in ECDM 39\u003c\/p\u003e \u003cp\u003e2.6.7 Literature Review on Optimization Techniques Used in ECDM 42\u003c\/p\u003e \u003cp\u003e2.7 Conclusion 87\u003c\/p\u003e \u003cp\u003eAcknowledgments 87\u003c\/p\u003e \u003cp\u003eReferences 87\u003c\/p\u003e \u003cp\u003e\u003cb\u003e3 Laser-Assisted Micromilling 101\u003cbr\u003e \u003c\/b\u003e\u003ci\u003eAsma Perveen, Sandip Kunar, Golam Kibria and Prasenjit Chatterjee\u003c\/i\u003e\u003c\/p\u003e \u003cp\u003e3.1 Introduction 102\u003c\/p\u003e \u003cp\u003e3.2 Laser-Assisted Micromilling 103\u003c\/p\u003e \u003cp\u003e3.2.1 Laser-Assisted Micromilling of Steel Alloys 103\u003c\/p\u003e \u003cp\u003e3.2.2 Laser-Assisted Micromilling of Titanium Alloys 105\u003c\/p\u003e \u003cp\u003e3.2.3 Laser-Assisted Micromilling of Ni Alloys 108\u003c\/p\u003e \u003cp\u003e3.2.4 Laser-Assisted Micromilling of Cementite Carbide 109\u003c\/p\u003e \u003cp\u003e3.2.5 Laser-Assisted Micromilling of Ceramics 110\u003c\/p\u003e \u003cp\u003e3.3 Conclusion 111\u003c\/p\u003e \u003cp\u003eReferences 112\u003c\/p\u003e \u003cp\u003e\u003cb\u003e4 Ultrasonic-Assisted Electrochemical Micromachining 115\u003cbr\u003e \u003c\/b\u003e\u003ci\u003eSandip Kunar, Itha Veeranjaneyulu, S. Rama Sree, Asma Perveen, Norfazillah Talib, Sreenivasa Reddy Medapati and K.V.S.R. Murthy\u003c\/i\u003e\u003c\/p\u003e \u003cp\u003e4.1 Introduction 116\u003c\/p\u003e \u003cp\u003e4.2 Ultrasonic Effect 117\u003c\/p\u003e \u003cp\u003e4.2.1 Pumping Effect 117\u003c\/p\u003e \u003cp\u003e4.2.2 Cavitation Effect 117\u003c\/p\u003e \u003cp\u003e4.3 Experimental Procedure 117\u003c\/p\u003e \u003cp\u003e4.4 Results and Discussion 118\u003c\/p\u003e \u003cp\u003e4.4.1 Effect of Traditional Electrochemical Micromachining 118\u003c\/p\u003e \u003cp\u003e4.4.2 Effect of Electrolyte Jet During Micropatterning 119\u003c\/p\u003e \u003cp\u003e4.4.3 Effect of Ultrasonic Assistance During Micropatterning 121\u003c\/p\u003e \u003cp\u003e4.4.4 Effect of Ultrasonic Amplitude During Micropatterning 121\u003c\/p\u003e \u003cp\u003e4.4.5 Influence of Working Voltage During Micropatterning 121\u003c\/p\u003e \u003cp\u003e4.4.6 Influence of Pulse-Off Time During Micropatterning 121\u003c\/p\u003e \u003cp\u003e4.4.7 Influence of Electrode Feed Rate During Micropatterning 122\u003c\/p\u003e \u003cp\u003e4.5 Conclusions 122\u003c\/p\u003e \u003cp\u003eReferences 123\u003c\/p\u003e \u003cp\u003e\u003cb\u003e5 Micro-Electrochemical Piercing on SS 204 125\u003cbr\u003e \u003c\/b\u003e\u003ci\u003eManas Barman, Premangshu Mukhopadhyay and Goutam Kumar Bose\u003c\/i\u003e\u003c\/p\u003e \u003cp\u003e5.1 Introduction 125\u003c\/p\u003e \u003cp\u003e5.2 Experimentation on SS 204 Plates With Cu Tool Electrodes 126\u003c\/p\u003e \u003cp\u003e5.3 Results and Discussions 127\u003c\/p\u003e \u003cp\u003e5.4 Conclusions 134\u003c\/p\u003e \u003cp\u003eReferences 134\u003c\/p\u003e \u003cp\u003e\u003cb\u003e6 Laser-Assisted Electrochemical Discharge Micromachining 137\u003cbr\u003e \u003c\/b\u003e\u003ci\u003eSandip Kunar, Kagithapu Rajendra, V. V. D. Praveen Kalepu, Prasenjit Chatterjee, Asma Perveen, Norfazillah Talib and K.V.S.R. Murthy\u003c\/i\u003e\u003c\/p\u003e \u003cp\u003e6.1 Introduction 138\u003c\/p\u003e \u003cp\u003e6.2 Experimental Procedure 140\u003c\/p\u003e \u003cp\u003e6.3 Results and Discussion 143\u003c\/p\u003e \u003cp\u003e6.3.1 ECDM Pre-Process 143\u003c\/p\u003e \u003cp\u003e6.3.2 Laser Pre-Process 145\u003c\/p\u003e \u003cp\u003e6.4 Conclusions 147\u003c\/p\u003e \u003cp\u003eReferences 147\u003c\/p\u003e \u003cp\u003e\u003cb\u003e7 Laser-Assisted Hybrid Micromachining Processes and Its Applications 151\u003cbr\u003e \u003c\/b\u003e\u003ci\u003eRavindra Nath Yadav\u003c\/i\u003e\u003c\/p\u003e \u003cp\u003e7.1 Introduction 152\u003c\/p\u003e \u003cp\u003e7.2 Laser-Assisted Hybrid Micromachining 156\u003c\/p\u003e \u003cp\u003e7.3 Laser-Assisted Traditional-HMMPs 157\u003c\/p\u003e \u003cp\u003e7.3.1 Laser-Assisted Microturning Process 157\u003c\/p\u003e \u003cp\u003e7.3.2 Laser-Assisted Microdrilling Process 160\u003c\/p\u003e \u003cp\u003e7.3.3 Laser-Assisted Micromilling Process 161\u003c\/p\u003e \u003cp\u003e7.3.4 Laser-Assisted Microgrinding Process 162\u003c\/p\u003e \u003cp\u003e7.4 Laser-Assisted Nontraditional HMMPs 163\u003c\/p\u003e \u003cp\u003e7.4.1 Laser-Assisted Electrodischarge Micromachining 164\u003c\/p\u003e \u003cp\u003e7.4.2 Laser-Assisted Electrochemical Micromachining 166\u003c\/p\u003e \u003cp\u003e7.4.3 Laser-Assisted Electrochemical Spark Micromachining 167\u003c\/p\u003e \u003cp\u003e7.4.4 Laser-Assisted Water Jet Micromachining 168\u003c\/p\u003e \u003cp\u003e7.5 Capabilities and Shortfalls of LA-HMMPs 171\u003c\/p\u003e \u003cp\u003e7.6 Conclusion 174\u003c\/p\u003e \u003cp\u003eAcknowledgment 174\u003c\/p\u003e \u003cp\u003eReferences 174\u003c\/p\u003e \u003cp\u003e\u003cb\u003e8 Hybrid Laser-Assisted Jet Electrochemical Micromachining Process 179\u003cbr\u003e \u003c\/b\u003e\u003ci\u003eSivakumar M., J. Jerald, Shriram S., Jayanth S. and N. S. Balaji\u003c\/i\u003e\u003c\/p\u003e \u003cp\u003e8.1 Introduction 180\u003c\/p\u003e \u003cp\u003e8.2 Overview of Electrochemical Machining 181\u003c\/p\u003e \u003cp\u003e8.3 Importance of Electrochemical Micromachining 182\u003c\/p\u003e \u003cp\u003e8.4 Fundamentals of Electrochemical Micromachining 182\u003c\/p\u003e \u003cp\u003e8.4.1 Electrochemistry of Electrochemical Micromachining 183\u003c\/p\u003e \u003cp\u003e8.4.2 Mechanism of Material Removal 184\u003c\/p\u003e \u003cp\u003e8.5 Major Factors of EMM 184\u003c\/p\u003e \u003cp\u003e8.5.1 Nature of Power Supply 184\u003c\/p\u003e \u003cp\u003e8.5.2 Interelectrode Gap (IEG) 185\u003c\/p\u003e \u003cp\u003e8.5.3 Temperature, Concentration, and Electrolyte Flow 185\u003c\/p\u003e \u003cp\u003e8.6 Jet Electrochemical Micromachining 186\u003c\/p\u003e \u003cp\u003e8.7 Laser as Assisting Process 188\u003c\/p\u003e \u003cp\u003e8.8 Laser-Assisted Jet Electrochemical Micromachining (la-jecm) 189\u003c\/p\u003e \u003cp\u003e8.8.1 Working Principles of LAJECM 189\u003c\/p\u003e \u003cp\u003e8.8.2 Mechanism of Material Removal 191\u003c\/p\u003e \u003cp\u003e8.8.3 Materials 193\u003c\/p\u003e \u003cp\u003e8.8.4 Theoretical and Experimental Method for Process Energy Distribution 194\u003c\/p\u003e \u003cp\u003e8.8.5 LAJECM Process Temperature 196\u003c\/p\u003e \u003cp\u003e8.8.6 Material Removal Rate and Taper Angle 196\u003c\/p\u003e \u003cp\u003e8.8.7 LAJECM and JECM Comparison 197\u003c\/p\u003e \u003cp\u003e8.8.8 Machining Precision 198\u003c\/p\u003e \u003cp\u003e8.8.8.1 Geometry Precision 198\u003c\/p\u003e \u003cp\u003e8.8.8.2 Profile Surface Roughness 200\u003c\/p\u003e \u003cp\u003e8.9 Applications of LAJECM 200\u003c\/p\u003e \u003cp\u003eReferences 202\u003c\/p\u003e \u003cp\u003e\u003cb\u003e9 Ultrasonic Vibration-Assisted Microwire Electrochemical Discharge Machining 205\u003cbr\u003e \u003c\/b\u003e\u003ci\u003eSandip Kunar, Kagithapu Rajendra, Devarapalli Raviteja, Norfazillah Talib, S. Rama Sree and M.S. Reddy\u003c\/i\u003e\u003c\/p\u003e \u003cp\u003e9.1 Introduction 206\u003c\/p\u003e \u003cp\u003e9.2 Experimental Setup 207\u003c\/p\u003e \u003cp\u003e9.3 Results and Discussion 208\u003c\/p\u003e \u003cp\u003e9.3.1 Influence of Ultrasonic Amplitude on Micro Slit Width 209\u003c\/p\u003e \u003cp\u003e9.3.2 Influence of Voltage on Micro Slit Width 211\u003c\/p\u003e \u003cp\u003e9.3.3 Effect of Duty Ratio on Micro Slit Width 212\u003c\/p\u003e \u003cp\u003e9.3.4 Influence of Frequency on Slit Width 213\u003c\/p\u003e \u003cp\u003e9.3.5 Analysis of Micro Slits 214\u003c\/p\u003e \u003cp\u003e9.4 Conclusions 215\u003c\/p\u003e \u003cp\u003eReferences 216\u003c\/p\u003e \u003cp\u003e\u003cb\u003e10 Study of Soda-Lime Glass Machinability by Gunmetal Tool in Electrochemical Discharge Machining and Process Parameters Optimization Using Grey Relational Analysis 219\u003cbr\u003e \u003c\/b\u003e\u003ci\u003ePravin Pawar, Amaresh Kumar and Raj Ballav\u003c\/i\u003e\u003c\/p\u003e \u003cp\u003e10.1 Introduction 220\u003c\/p\u003e \u003cp\u003e10.2 Experimental Conditions 221\u003c\/p\u003e \u003cp\u003e10.3 Analysis of Average MRR of Workpiece (Soda-Lime Glass) Through Gunmetal Electrode 223\u003c\/p\u003e \u003cp\u003e10.3.1 ANOVA for Average MRR 224\u003c\/p\u003e \u003cp\u003e10.3.2 Influence of Input Factors on Average MRR 228\u003c\/p\u003e \u003cp\u003e10.4 Analysis of Average Depth of Machined Hole on Soda-Lime Glass Through Gunmetal Electrode 228\u003c\/p\u003e \u003cp\u003e10.4.1 ANOVA for Average Machined Depth 229\u003c\/p\u003e \u003cp\u003e10.4.2 Influence of Input Factors on Average Machined Depth 230\u003c\/p\u003e \u003cp\u003e10.5 Analysis of Average Diameter of Hole of Soda-Lime Glass Through Gunmetal Electrode 231\u003c\/p\u003e \u003cp\u003e10.5.1 ANOVA for Average Hole Diameter 231\u003c\/p\u003e \u003cp\u003e10.5.2 Influence of Input Factors on Average Hole Diameter 231\u003c\/p\u003e \u003cp\u003e10.6 Grey Relational Analysis Optimization of Soda-Lime Glass Results by Gunmetal Electrode 232\u003c\/p\u003e \u003cp\u003e10.6.1 Methodology of Grey Relational Analysis 233\u003c\/p\u003e \u003cp\u003e10.6.2 Data Pre-Processing 233\u003c\/p\u003e \u003cp\u003e10.6.3 Grey Relational Generating 233\u003c\/p\u003e \u003cp\u003e10.6.4 Deviation Sequence 234\u003c\/p\u003e \u003cp\u003e10.6.5 Grey Relational Coefficient 235\u003c\/p\u003e \u003cp\u003e10.6.6 Grey Relational Grade 235\u003c\/p\u003e \u003cp\u003e10.7 Conclusion 238\u003c\/p\u003e \u003cp\u003eAcknowledgments 238\u003c\/p\u003e \u003cp\u003eReferences 238\u003c\/p\u003e \u003cp\u003e\u003cb\u003e11 Micro Turbine Generator Combined with Silicon Structure and Ceramic Magnetic Circuit 243\u003cbr\u003e \u003c\/b\u003e\u003ci\u003eMinami Kaneko and Fumio Uchikoba\u003c\/i\u003e\u003c\/p\u003e \u003cp\u003e11.1 Introduction 244\u003c\/p\u003e \u003cp\u003e11.2 Concept 246\u003c\/p\u003e \u003cp\u003e11.3 Fabrication Technology 247\u003c\/p\u003e \u003cp\u003e11.3.1 Microfabrication Technology of Silicon Material 247\u003c\/p\u003e \u003cp\u003e11.3.2 Multilayer Ceramic Technology 248\u003c\/p\u003e \u003cp\u003e11.4 Designs and Experiments 249\u003c\/p\u003e \u003cp\u003e11.4.1 Designs of Turbine and Magnetic Circuit for Single-Phase Type 249\u003c\/p\u003e \u003cp\u003e11.4.2 Designs of Turbine and Magnetic Circuit for Three-Phase Type 252\u003c\/p\u003e \u003cp\u003e11.4.3 Rotational Experiment and Rotor Blade Design 253\u003c\/p\u003e \u003cp\u003e11.4.4 Low Boiling Point Fluid and Experiment 255\u003c\/p\u003e \u003cp\u003e11.5 Results and Discussion 255\u003c\/p\u003e \u003cp\u003e11.5.1 Fabricated Evaluation 255\u003c\/p\u003e \u003cp\u003e11.5.2 Rotational Result 258\u003c\/p\u003e \u003cp\u003e11.5.3 Comparison of Rotor Shape and Rotational Motion 262\u003c\/p\u003e \u003cp\u003e11.5.4 Phase Change 264\u003c\/p\u003e \u003cp\u003e11.6 Conclusions 267\u003c\/p\u003e \u003cp\u003eAcknowledgment 268\u003c\/p\u003e \u003cp\u003eReferences 268\u003c\/p\u003e \u003cp\u003e\u003cb\u003e12 A Review on Hybrid Micromachining Process and Technologies 271\u003cbr\u003e \u003c\/b\u003e\u003ci\u003eAkhilesh Kumar Singh, Sandip Kunar, M. Zubairuddin, Pramod Kumar, Marxim Rahula Bharathi B., P.V. Elumalai, M. Murugan and Yarrapragada K.S.S. Rao\u003c\/i\u003e\u003c\/p\u003e \u003cp\u003e12.1 Introduction 272\u003c\/p\u003e \u003cp\u003e12.2 Characteristics of Hybrid-Micromachining 272\u003c\/p\u003e \u003cp\u003e12.3 Bibliometric Survey of Micromachining to Hybrid-Micromachining 273\u003c\/p\u003e \u003cp\u003e12.4 Material Removal in Microsizes 275\u003c\/p\u003e \u003cp\u003e12.5 Nontraditional Hybrid-Micromachining Technologies 276\u003c\/p\u003e \u003cp\u003e12.6 Classification of Techniques Used for Micromachining to Hybrid-Micromachining 276\u003c\/p\u003e \u003cp\u003e12.6.1 Classification According to Material Removal Hybrid-Micromachining Phenomena 277\u003c\/p\u003e \u003cp\u003e12.6.2 Classification According to Categories Based on Material Removal Accuracy 277\u003c\/p\u003e \u003cp\u003e12.6.3 Classification According to Hybrid-Micromachining Purposes 278\u003c\/p\u003e \u003cp\u003e12.6.4 Classification of Hybrid Micromanufacturing Processes 278\u003c\/p\u003e \u003cp\u003e12.7 Materials Are Used and Application of Hybrid-Micromachining 278\u003c\/p\u003e \u003cp\u003e12.8 Conclusions 279\u003c\/p\u003e \u003cp\u003eReferences 279\u003c\/p\u003e \u003cp\u003e\u003cb\u003e13 Material Removal in Spark-Assisted Chemical Engraving for Micromachining 283\u003cbr\u003e \u003c\/b\u003e\u003ci\u003eSumanta Banerjee\u003c\/i\u003e\u003c\/p\u003e \u003cp\u003e13.1 Introduction 284\u003c\/p\u003e \u003cp\u003e13.2 Essentials of SACE 285\u003c\/p\u003e \u003cp\u003e13.2.1 Instances of SACE Micromachining 286\u003c\/p\u003e \u003cp\u003e13.3 Genesis of SACE Acronym: A Brief Historical Survey 286\u003c\/p\u003e \u003cp\u003e13.4 SACE: A Viable Micromachining Technology 288\u003c\/p\u003e \u003cp\u003e13.4.1 Mechanical µ-Machining Techniques 288\u003c\/p\u003e \u003cp\u003e13.4.2 Chemical µ-Machining Methods 289\u003c\/p\u003e \u003cp\u003e13.4.3 Thermal µ-Machining Methods 289\u003c\/p\u003e \u003cp\u003e13.5 Material Removal Mechanism in SACE µ-Machining 290\u003c\/p\u003e \u003cp\u003e13.5.1 General Aspects 290\u003c\/p\u003e \u003cp\u003e13.5.2 Micromachining at Shallow Depths 294\u003c\/p\u003e \u003cp\u003e13.5.3 Micromachining at High Depths 300\u003c\/p\u003e \u003cp\u003e13.5.4 Micromachining by Chemical Reaction 301\u003c\/p\u003e \u003cp\u003e13.6 SACE µ-Machining Process Control 303\u003c\/p\u003e \u003cp\u003e13.6.1 Analysis of Process 303\u003c\/p\u003e \u003cp\u003e13.6.2 Etch Promotion 304\u003c\/p\u003e \u003cp\u003e13.7 Conclusion and Scope for Future Work 307\u003c\/p\u003e \u003cp\u003eReferences 308\u003c\/p\u003e \u003cp\u003eIndex 313\u003c\/p\u003e","brand":"John Wiley \u0026 Sons Inc","offers":[{"title":"Default Title","offer_id":49083884798295,"sku":"9781394174478","price":118.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0817\/1739\/5799\/files\/9781394174478.jpg?v=1725550323","url":"https:\/\/bookcurl.com\/products\/hybrid-micromachining-and-microfabrication-technologies-9781394174478","provider":"Book Curl","version":"1.0","type":"link"}